Search Results

Search found 7967 results on 319 pages for 'dizzy bryan high'.

Page 225/319 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• USB drives not recognized all of a sudden (module usb_storage not loading)

  - by Siddharth

  I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• The winning combination: Oracle VM Server for x86 + Oracle Sun Fire HW

  - by Karim Berrah

  You might be wondering why OVM Server for x86 (OVM/x86 here and below) should be seriously considered as a nice (business point of view) alternative to standard Hypervisors, if you are virtualizing Oracle Software, especially if you are planning to move to Oracle x86 Hardware (rackmount or blades). Well, let see some "not well known" facts that might interest you and help you in saving more money for your entire company (and not only the Virtulization team). Fact 1: OVM/x86 is considered as a hard partitionning technology (check page 2 of Oracle Server Partitionning Licencing Policies), so if you are buying new servers based on the latest INTEL Xeon E7 CPUs (10 cores per Socket) and have some licencing issues in deploying further Oracle SW, because you are using a hypervisor not recognized as a hard partitionning technology (like VMware), then you need to check here how to do it with OVM . This might help you to continue to deploy your Oracle DB instances on new x86 HW (12 cores, 40 cores, 64 cores servers) in a reasonable way, without having to pay licences for 12 CPU, 40 CPUs or 64 CPUs. You might also consider migrating your legacy Oracle DB DBs to a virtualized environment like OVM/x86 an recover some CPU licences, that can be reused somewhere else in production. Fact 2: OVM/x86 is free to use, without any extra licence for any specific feature (LiveMigration, High Availability, Embedded Management Console). If you want to use it on non Oracle HW, there is a support fee per  system and per year, that is much below VMware support (Oracle VM Premier Limited Support for systems up to 2 CPUs, and Oracle VM Premier Support for any bigger system, independently on the number of populated sockets). Fact 3: support is included with your Oracle x86 HW support (OPS for systems)  and you can re-install on you system Oracle Linux, Oracle Solaris or Oracle VM server for x86, without beeing charged, an keeping the same support level. Fact 4: it is less expensive to virtualize Oracle Linux or Oracle Solaris on OVM/x86 with Oracle HW that any other similar solution with VMware, because all the VMs are then supported and licenced when you buy Oracle HW with OPS. Fact 5: Oracle VM Templates bring you many Virtual Machines already installed, patched and optimized for various Oracle applications. And to be more specific, those templates are fully supported by Oracle, which is not really true when it comes to another hypervisor. By optimized VM Kernel, I mean PV drivers, OVM-ready kernels in the VM, single source clock for all the VMS, better memory management of the VM ... Fact 6: there is no extra costs for a management console. OVM comes with a free OVM Manager package for Linux.  More infos: Latest announcement of OVM/x86 update 2.2.2 A short flash demo of OVM server for x86 A short flash demo on OVM Templates and Virtual Assembly Builder Oracle Linux Support and Oracle VM Support Global Price List  ISVs: Benefits for Independant Sofwtare Vendors (ISVs) in using OVM/x86 Consultant Services: Advanced Customer Services for OVM/x86  Technical Features Best practices and Guideline for OVM with Oracle Blades Reduce TCO and get more Value from your x86 Infrastructure

  Read the article

• What's new in the RightNow November 2012 release?

  - by Richard Lefebvre

  What new in the RightNow November 2012? In order to find out, please watch this tutorial with imbedded demonstration or read the November 2012 Release notes.   News Facts The November 2012 release of     Oracle’s RightNow CX Cloud Service marks the completion of development efforts for 2012 and continues Oracle’s commitment to enhancing the Oracle RightNow offering following the acquisition. New release delivers key capabilities designed to help organizations improve customer experiences in order to increase customer acquisition and retention, while reducing total cost of ownership. Part of the Oracle Cloud, Oracle RightNow CX Cloud Service now integrates Oracle RightNow Chat Cloud Service with Oracle Engagement Engine Cloud Service, helping organizations intelligently and proactively engage with customers through the right channel at the right time. Chat solutions have emerged as an important component of a cross-channel customer experience strategy. According to Forrester Research, Inc., chat adoption has risen dramatically between 2009 and 2011 from 19% to 37%, and it has the highest satisfaction level of all customer service channels at 62% satisfaction. (*) To help companies deliver enhanced customer experiences, Oracle has made significant investments in Oracle RightNow Chat Cloud Service throughout 2012. With the addition of rules-based engagement to existing capabilities such as co-browse, mobile chat, and cross-channel knowledge integration with the contact center, all delivered via the cloud, Oracle RightNow Chat Cloud Service is differentiated as the industry-leading chat solution. The Oracle Cloud offers a broad portfolio of software as-a-service applications, including Oracle Customer Service and Support Cloud Service, which is based on the Oracle RightNow CX Cloud Service. New Capabilities Key Oracle RightNow Chat Cloud Service and other cross-channel capabilities include: Chat Business Rules, with over 70 built-in rule conditions, leverage the Oracle Engagement Engine to help enable organizations capture rich visitor data and invoke complex actions and triggers. Chat Business Rules allow granular control over when to engage a customer via the chat channel based on customer behavior, customer profile information and operational information. Click-to-Call provides the option for a customer to engage with a live agent over the phone during the Web browsing experience. Chat Availability Controls provide organizations with the ability to throttle volume through the chat channel based on real-time agent availability and wait time thresholds. This ability to manage the channel more efficiently allows organizations to provide a better experience to customers using the chat channel. Strategic and Operational Chat Channel Analytics provide better insight into channel and agent productivity and utilization and effectiveness with both out-of-the-box reports and ad hoc reports. New chat channel analytics provide comprehensive metrics with full data transparency. Background Service Updates improve high availability metrics for Oracle RightNow Chat Cloud Service during service update periods, setting the industry leading standard for sales and service delivery to customers via the chat channel. Additional Capabilities include: Improved Web developer tools for more efficient self-service user interface design Improved administration for enhanced user sessions management Increased cross-channel community collaboration Enhanced extensibility widgets and syndication management Streamlined content management and analytics capabilities Read the full announcement here

  Read the article

• Database Mirroring – deprecated

  - by fatherjack

  Do you use mirroring on any of your databases? Do you use mirroring on SQL Server Standard Edition? I do, as a way of having a stand-by server ready to take over if there is a problem with the live server so that business can continue despite whatever disaster may strike at our primary server location. In my experience it has been a great solution for us as it is simple to implement, reliable and predictable. Mirroring has been around since SQL Server 2005 sp1 but with the release of SQL Server 2012 mirroring has now been placed on the deprecation list. That’s right, Microsoft are removing this feature from SQL Server. SQL Server 2012 had lots of improvements and new features around this sort of technology – the High Availability, Disaster recovery and Always On features described in detail here by Brent Ozar and  Microsoft’s own Customer Service and Support SQL Server Engineers . Now the bad news, the HADRON features are pretty much all wrapped up in the Enterprise Edition of SQL Server 2012. This is going to be a big issue for people, like me, who are only on Standard Edition of earlier versions mostly due to our requirements and the budget (or lack thereof) required for Enterprise Edition licenses. No mirroring in Standard Edition means no upgrade. Don’t Panic. There are two stages of deprecation and they dont happen fast. The first stage – Deprecation Announcement- means that Microsoft have decided that there is a limited future for a particular feature and this is your cue that new projects and developments should not be implemented on this technology as it will cease to exist in the future. This is where mirroring currently stands. You have time to consider your options and start work on planning how you will move away from using this feature. This can be 2 or 3 versions of SQL Server, possibly more. The next stage is Deprecation Final Support - this is where you are on your last chance, When you see this then the next version of SQL Server will not have this feature in it so you need to implement your plans to move to an alternative solution. While these two phases are taking place Microsoft are open to feedback on how people use their products and if enough people make the case for mirroring (or an equivalent technology) to be in the Standard Edition then they may make changes rather than lose customers or have customers cease upgrading in order to keep the functionality they need. Denny Cherry (@MrDenny) has published an article on this same topic here with more detail than me so I wont go over old ground. All I will say is that you should read his article now and then follow the link to his own site where he is collecting peoples information on how they use mirroring in Standard Edition so that our voice can be put to Microsoft.  

  Read the article

• Microsoft MVP Award Nomination

  - by Mark A. Wilson

  I am extremely honored to announce that I have been nominated to receive the Microsoft MVP Award for my contributions in C#! Hold on; I have not won the award yet. But to be nominated is really humbling. Thank you very much! For those of you who may not know, here is a high-level summary of the MVP award: The Microsoft Most Valuable Professional (MVP) Program recognizes and thanks outstanding members of technical communities for their community participation and willingness to help others. The program celebrates the most active community members from around the world who provide invaluable online and offline expertise that enriches the community experience and makes a difference in technical communities featuring Microsoft products. MVPs are credible, technology experts from around the world who inspire others to learn and grow through active technical community participation. While MVPs come from many backgrounds and a wide range of technical communities, they share a passion for technology and a demonstrated willingness to help others. MVPs do this through the books and articles they author, the Web sites they manage, the blogs they maintain, the user groups they participate in, the chats they host or contribute to, the events and training sessions where they present, as well as through the questions they answer in technical newsgroups or message boards. - Microsoft MVP Award Nomination Email I guess I should start my nomination acceptance speech by profusely thanking Microsoft as well as everyone who nominated me. Unfortunately, I’m not completely certain who those people are. While I could guess (in no particular order: Bill J., Brian H., Glen G., and/or Rob Z.), I would much rather update this post accordingly after I know for certain who to properly thank. I certainly don’t want to leave anyone out! Please Help My next task is to provide the MVP Award committee with information and descriptions of my contributions during the past 12 months. For someone who has difficulty remembering what they did just last week, trying to remember something that I did 12 months ago is going to be a real challenge. (Yes, I should do a better job blogging about my activities. I’m just so busy!) Since this is an award about community, I invite and encourage you to participate. Please leave a comment below or send me an email. Help jog my memory by listing anything and everything that you can think of that would apply and/or be important to include in my reply back to the committee. I welcome advice on what to say and how to say it from previous award winners. Again, I greatly appreciate the nomination and welcome any assistance you can provide. Thanks for visiting and till next time, Mark A. Wilson      Mark's Geekswithblogs Blog Enterprise Developers Guild Technorati Tags: Community,Way Off Topic

  Read the article

• Frustrated where I am, but not sure where to go with my career [closed]

  - by Tom Pickles

  I work (3 years now) as a lead developer for a team developing internal tools and websites for a customer account within large outsourcing company. I'm a self taught programmer and my previous incarnation was a 3rd line support guy, so I have a solid infrastructure knowledge. We use VB.Net/MSSQL/SSIS/SSRS ASP.NET (nTier) in house and I have about 8 years coding experience. Without going into too much detail, my boss is very ambitious and uses our team as his footing to get up the ladder. I've been in the team from the start and the only new dev's we have brought in have been people with a bit of VBA/VBScript experience, much to my chagrin, to bolster his empire. It's been a lot of hard work to bring them up to a standard, but there's still a lot for them to learn. This makes my life stressful as I always get the high profile/complex project work to do as other's simply cannot do it, or it'd take them twice/three times longer to do it. My boss is always seeking stuff for us to build for people who haven't asked for it, which usually get's thrown to me as I have the most experience and can pick new API's (etc) up quicker. He doesn't give us proper requirements, we don't get time to design properly before we code, he wants us to throw something (quick and dirty as he calls it) together so we can get it out ASAP. I take pride in my work so I like to do it properly, make my code clean, maintainable etc, and I train the other guys in the team to do the same. But, we always fall on our faces. The customer we drop the apps on say it doesn't do what they need (due to few requirements), or my boss doesn't like it/changes the spec, so we have to rework it, it get's drawn out, and it makes us and me look and feel like fools. We then get accused by boss of not being reactive enough to change. I've had enough. In order to get my skills and knowledge gap's filled, I've been reading Code Complete 2nd Ed (McConnell) and the Head First Design Patterns books. I'm forcing myself to move into C# from VB at home to broaden my horizons. I'm not sure where to go from here. I don't want to code all my life as I'd like to move into a higher level design/architects role at some point in time (I'm 35). Where do I/can I go from here?

  Read the article

• Windows Azure Learning Plan - Architecture

  - by BuckWoody

  This is one in a series of posts on a Windows Azure Learning Plan. You can find the main post here. This one deals with what an Architect needs to know about Windows Azure.   General Architectural Guidance Overview and general  information about Azure - what it is, how it works, and where you can learn more. Cloud Computing, A Crash Course for Architects (Video) http://www.msteched.com/2010/Europe/ARC202 Patterns and Practices for Cloud Development http://msdn.microsoft.com/en-us/library/ff898430.aspx Design Patterns, Anti-Patterns and Windows Azure http://blogs.msdn.com/b/ignitionshowcase/archive/2010/11/27/design-patterns-anti-patterns-and-windows-azure.aspx Application Patterns for the Cloud http://blogs.msdn.com/b/kashif/archive/2010/08/07/application-patterns-for-the-cloud.aspx Architecting Applications for High Scalability (Video) http://www.msteched.com/2010/Europe/ARC309 David Aiken on Azure Architecture Patterns (Video) http://blogs.msdn.com/b/architectsrule/archive/2010/09/09/arcast-tv-david-aiken-on-azure-architecture-patterns.aspx Cloud Application Architecture Patterns (Video) http://blogs.msdn.com/b/bobfamiliar/archive/2010/10/19/cloud-application-architecture-patterns-by-david-platt.aspx 10 Things Every Architect Needs to Know about Windows Azure http://geekswithblogs.net/iupdateable/archive/2010/10/20/slides-and-links-for-windows-azure-platform-session-at-software.aspx Key Differences Between Public and Private Clouds http://blogs.msdn.com/b/kadriu/archive/2010/10/24/key-differences-between-public-and-private-clouds.aspx Microsoft Application Platform at a Glance http://blogs.msdn.com/b/jmeier/archive/2010/10/30/microsoft-application-platform-at-a-glance.aspx Windows Azure is not just about Roles http://vikassahni.wordpress.com/2010/11/17/windows-azure-is-not-just-about-roles/ Example Application for Windows Azure http://msdn.microsoft.com/en-us/library/ff966482.aspx Implementation Guidance Practical applications for the architect to consider 5 Enterprise steps for adopting a Platform as a Service http://blogs.msdn.com/b/davidmcg/archive/2010/12/02/5-enterprise-steps-for-adopting-a-platform-as-a-service.aspx?wa=wsignin1.0 Performance-Based Scaling in Windows Azure http://msdn.microsoft.com/en-us/magazine/gg232759.aspx Windows Azure Guidance for the Development Process http://blogs.msdn.com/b/eugeniop/archive/2010/04/01/windows-azure-guidance-development-process.aspx Microsoft Developer Guidance Maps http://blogs.msdn.com/b/jmeier/archive/2010/10/04/developer-guidance-ia-at-a-glance.aspx How to Build a Hybrid On-Premise/In Cloud Application http://blogs.msdn.com/b/ignitionshowcase/archive/2010/11/09/how-to-build-a-hybrid-on-premise-in-cloud-application.aspx A Common Scenario of Multi-instances in Windows Azure http://blogs.msdn.com/b/windows-azure-support/archive/2010/11/03/a-common-scenario-of-multi_2d00_instances-in-windows-azure-.aspx Slides and Links for Windows Azure Platform Best Practices http://geekswithblogs.net/iupdateable/archive/2010/09/29/slides-and-links-for-windows-azure-platform-best-practices-for.aspx AppFabric Architecture and Deployment Topologies guide http://blogs.msdn.com/b/appfabriccat/archive/2010/09/10/appfabric-architecture-and-deployment-topologies-guide-now-available-via-microsoft-download-center.aspx Windows Azure Platform Appliance http://www.microsoft.com/windowsazure/appliance/ Integrating Cloud Technologies into Your Organization Interoperability with Open Source and other applications; business and cost decisions Interoperability Labs at Microsoft http://www.interoperabilitybridges.com/ Windows Azure Service Level Agreements http://www.microsoft.com/windowsazure/sla/

  Read the article

• Presentations & Training material OFM Summer Camps & Impressions & Feedback

  - by JuergenKress

  Thanks to all attendees who invested their time and utilized the opportunity to attend the Summer Camps! Due to high demand of our most of the trainings, we had a long waiting list with more numbers of partners who are keen to attend it. We would like to give our special thanks to all trainers, who delivered excellent workshops! Most of the presentations and course material have been posted on our SOA Community Workspace and WebLogic Community Workspace. You can access the content only if you are a registered community member. To register for the SOA Community please click here. You can register for the WebLogic Community here. To find out the first impressions of the event please visit our Facebook pages: www.facebook.com/WebLogicCommunity & www.facebook.com/soacommunity or Picasa Album Thanks for the excellent blog posts from AMIS Technology Blog & Middleware by Link Consulting. Let us know if you published a twitter blog on @soacommunity & @wlscommunity. We will be pleased to publish it in our Newsletters. WebLogic Course Quotes “Oracle trainings are the best” - Pedro Neto Novobas “Excellent training, well organized” - Pedro Antunh, Capgemini “This course dives you into Oracle WebLogic giving you a quick start on benefiting from Fusion Apps” - Leonardo Fernandes, Outsystems Additional Quotes “Thanks a lot again for organizing such a great and informative Summer Camp. Both training and networking were organized very professionally. I have gained tons of very useful Info, which will definitely help to increase quality of our future projects.” - Daniel Fasko fss-group.com “I didn’t get the chance yesterday to thank you for a most enjoyable and thoroughly educational time I had in Munich over the last few days.” - Jeroen Bakker Ordina “Just to congratulate you on a great event, not only today but also in the previous days of training. As we know, a very good organization and, as a native Portuguese that knows Lisbon very good, a nice choice of places to visit. Looking forward to come again next year.” Pedro Miguel Neto, Novobase. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: OFM Summer Camps,eduction,training,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Voxel Engine in Multiplayer?

  - by Oliver Schöning

  This is a question more out of Interest for now, because I am not even near to the point that I could create this project at the moment. I really like the progress on the Atomontage Engine. A Voxel engine that is WIP at the moment. I would like to create a Voxel SERVER eventually. First in JavaScript (That's what I am learning right now) later perhaps in C++ for speed. Remember, I am perfectly aware that this is very hard! This is a brainstorm for the next 10 years as for now. What I would like to achieve one day is a Multiplayer Game in the Browser where the voxels positions are updated by XYZ input from the server. The Browser Does only 3 things: sending player input to the server, updating Voxel positions send from the server and rendering the world. I imagine using something like the Three.js libary on the client side. So that would be my programming dream right there... Now to something simpler for the near future. Right now I am learning javascript. And I am making games with Construct2. (A really cool JavaScript "game maker") The plan is to create a 2D Voxel enviorment (Block Voxels) on the Socket.IO Server* and send the position of the Voxels and Players to the Client side which then positions the Voxel Blocks to the Server Output coordinates. I think that is a bit more manageable then the other bigger idea. And also there should be no worries about speed with this type of project in JavaScript (I hope). Extra Info: *I am using nodejs (Without really knowing what it does besides making Socket.IO work) So now some questions: Is the "dream project" doable in JavaScript? Or is C++ just the best option because it does not take as long to be interpreted at run time like JavaScript? What are the limitations? I can think of some: Need of a Powerful server depending on how much information the server has to process. Internet Speed; Sending the data of the Voxel positions to every player could add up being very high! The browser FPS might go down quickly if rendering to many objects. One way of fixing reducing the packages Could be to let the browser calculate some of the Voxel positions from Several Values. But that would slow down the Client side too. What about the more achievable project? I am almost 100% convinced that this is possible in JavaScript, and that there are several ways of doing this. This is just XY position Updating for now.. Hope this did make some sense. Please comment if you got something to say :D

  Read the article

• SQLAuthority News – I am Presenting 2 Sessions at TechEd India

  - by pinaldave

  TechED is the event which I am always excited about. It is one of the largest technology in India. Microsoft Tech Ed India 2011 is the premier technical education and networking event for tech professionals interested in learning, connecting and exploring a broad set of current and soon-to-be released Microsoft technologies, tools, platforms and services. I am going to speak at the TechED on two very interesting and advanced subjects. Venue: The LaLiT Ashok Kumara Krupa High Grounds Bangalore – 560001, Karnataka, India Sessions Date: March 25, 2011 Understanding SQL Server Behavioral Pattern – SQL Server Extended Events Date and Time: March 25, 2011 12:00 PM to 01:00 PM History repeats itself! SQL Server 2008 has introduced a very powerful, yet very minimal reoccurring feature called Extended Events. This advanced session will teach experienced administrators’ capabilities that were not possible before. From T-SQL error to CPU bottleneck, error login to deadlocks –Extended Event can detect it for you. Understanding the pattern of events can prevent future mistakes. SQL Server Waits and Queues – Your Gateway to Perf. Troubleshooting Date and Time: March 25, 2011 04:15 PM to 05:15 PM Just like a horoscope, SQL Server Waits and Queues can reveal your past, explain your present and predict your future. SQL Server Performance Tuning uses the Waits and Queues as a proven method to identify the best opportunities to improve performance. A glance at Wait Types can tell where there is a bottleneck. Learn how to identify bottlenecks and potential resolutions in this fast paced, advanced performance tuning session. My session will be on the third day of the event and I am very sure that everybody will be in groove to learn new interesting subjects. I will have few give-away during and at the end of the session. I will not tell you what I will have but it will be for sure something you will love to have. Please make a point and reserve above time slots to attend my session. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: SQL Extended Events

  Read the article

• Now Shipping! NetAdvantage for .NET 2010 Volume 3!

  The new NetAdvantage Ultimate includes all four Line of Business user interface control sets for ASP .NET, Windows Forms, WPF and Silverlight plus two advanced Data Visualization UI control sets for WPF and Silverlight. With six NetAdvantage products in one robust package, Infragistics® gives you hundreds of controls and infinite development possibilities. Unified XAML Product Strategy-Share Code, Get More Controls In the 10.3 release, Infragistics continues to deliver code parity between the XAML platforms, WPF and Silverlight. In the line of business toolsets, Infragistics introduces the new xamSchedule™, full-featured, Outlook® 2010-style schedule controls, and the new xamDataTree™, a data bound tree view that comfortably handles tens of thousands of tree nodes. Mimicking our Silverlight Drag and Drop Framework, the WPF Drag and Drop Framework CTP empowers you to add your own rich touches to your applications. Track Users' Behaviors New to all NetAdvantage Silverlight controls is the Infragistics Analytics Framework (IGAF), which empowers you to track user behavior in RIAs running on Silverlight 4. Building on the Microsoft® Silverlight Analytics Framework, with IGAF you can analyze the user's behaviors to ensure the experience you want to deliver. NetAdvantage for Windows Forms--New Office® 2010 Ribbon and Application Menu 2010 Create new experiences with Windows Forms. Now with Office 2010 styling, NetAdvantage for Windows Forms has new features such as Microsoft® Office 2010 ribbon and enhanced Infragistics.Excel to export the contents of the high performance WinGrid™ into Microsoft Excel® 2010. The new Windows Message Support enables Infragistics standalone editor controls to process numerous Windows® OS messages, allowing them to respond just like native controls to changes in the Windows environment. Create Faster Web 2.0 Experiences with NetAdvantage for ASP .NET Infragistics continues to push the envelope to deliver the fastest ASP .NET WebForms controls available on the market. Our lightning fast ASP .NET grids are now enhanced with XPS/PDF Exporting and Summary Rows. This release also includes support for jQuery Templating (as a CTP) within our WebDataGrid™ and WebDataTree™ controls allowing you to quickly cut down overall page size. Deliver Business Intelligence with Power, Flexibility and the Office 2010 Experience NetAdvantage for WPF Data Visualization and NetAdvantage for Silverlight Data Visualization help you deliver flexible, powerful and usable end user experiences in Business Intelligence applications. Both suites include the Pivot Grid that delivers the full power of online analytical processing (OLAP) to present multi-dimensional data, sliced and diced in cross-tabulated form for end users to drill down into, interact with and easily extract meaning from the data. Mapping Made Easy 10.3 marks the official release of the WPF Data Visualization xamMap™ control to map anything and everything from geographic to geo-spacial mapping data. Map layers allow you to add successive levels of detail, navigational panes for panning in all directions, color swatch panes that facilitate value scales like Choropleth shading, and scale panes allowing users to zoom-in and out. Both toolsets introduce the first of many relationship maps! With the xamOrgChart™ CTP you can map out organizational charts of up to 50K employees, competitive brackets (think World Cup) and any other relational, organizational map your application needs. http://www.infragistics.com span.fullpost {display:none;}

  Read the article

• Why You Should Attend MySQL Connect, and Register Now

  - by Bertrand Matthelié

  MySQL Connect is taking place on September 29 and 30 in San Francisco. The early bird discount enabling you to save US$ 500 is only running for a few more days, until July 13. Are you still wondering if you should sign up? Here are 10 reasons why you definitely should: Learn from other companies how they tackled similar challenges to the ones you’re facing. Find out what they learned along the way, and how you can save time, money and a lot of troubles by avoiding repeating the same mistakes and applying the best practices they’ve developed. You’ll get the chance to hear from organizations including PayPal, Verizon, Twitter, Facebook, Ticketmaster, Ning, Mozilla, CERN, Yahoo! and more! Don’t miss this unique opportunity to meet the engineers developing and supporting the MySQL products in a single location. You’ll be able to ask them all your questions, which can represent a huge time and money saver. Acquire detailed knowledge about InnoDB, the MySQL Optimizer, High Availability strategies, improving performance and scalability, enhancing security and numerous other topics. You’ll hear it straight "from the horse’s mouth" as well as from other MySQL experts in the ecosystem. Get a better understanding about Oracle’s MySQL strategy and about the MySQL roadmap, so you can better plan where to use the MySQL database and MySQL Cluster for your next web, cloud-based and other applications. Get hands-on experience about improving performance with the MySQL Performance Schema, about using MySQL Utilities, MySQL Cluster and a lot more with eight different Hands-On Labs. Express your ideas, engage into discussions and help influence the MySQL roadmap during Birds-of-a-feather sessions about replication, backup, query optimizations and other topics. Meet partners and learn about third party tools that could be useful in your architecture. Immerse yourself into the MySQL universe and hang out with MySQL experts for two days. The discussions as well as the relationships you will create can be priceless and help you execute on your next projects in a much better and faster way. Register Now to save US$500 by taking advantage of the Early bird discount running until July 13. We’ll have parallel tracks so you should consider sending a few team members to make the most of the event. Are you attending or planning to attend Oracle OpenWorld or JavaOne? You can add MySQL Connect to your registration for only US$100! Finally, it’s always a lot of fun to attend a MySQL conference. The passion and the energy are contagious…and you’ll likely get plenty of new ideas. You will find all information about the program in the MySQL Connect Content Catalog. We look forward to seeing you there! You can also read interviews with Tomas Ulin and Ronald Bradford about MySQL Connect. Sponsorship and exhibit opportunities are still available for the conference. You will find more information here.

  Read the article

• USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• Ubuntu turns off instead of suspend / sleeping

  - by Marcos

  I'm using Ubuntu 11.10 on my notebook as the main OS. How ever, I've been facing a serious problem: Every time I try to suspend it, or it just stays idle for a while, the computer shuts down, instead of suspending. It actually seems to be suspended, but when I press the button the awake it, it turns on, the open works are all lost. How can i fix this? P.s: On windows 7 the suspend / sleep resumes just fine. Here is a complete list of hardware: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) 00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 02:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 80) 02:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 80) 02:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 80) 02:00.5 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03) I've updated the kernel to 3.2 still and hibernate or suspend is still not working. SWAP is 1/4 of my RAM.

  Read the article

• Reasons to Use a VM For Development

  - by George Stocker

  Background: I work at a start-up company, where one team uses Virtual Machines to connect to a remote server to do their development, and another team (the team I'm on) uses local IIS/SQL Server 2005/Visual Studio installations to conduct work. Team VM is located about 1000 miles from Team Non-VM, and the servers the VMs run off of are located near Team VM (Latency, for those that are wondering, is about 50ms). A person high in the company is pushing for Team Non-VM to use virtual machines for programming, development, and testing. The latter point we agree on -- we want Virtual Machines to test configurations and various aspects of the web application in a 'clean' state. The Problem: What we don't agree on is having developers using RDP to connect to a desktop remotely that contains Visual Studio, SQL Server, and IIS to do the same development we could do locally on our laptops. I've tried the VM set-up, and besides the color issue, there is a latency issue that is rather noticeable, not to mention that since we're a start-up, a good number of employees work from home on occasion with our work laptops, and this move would cut off the laptops. They'd be turned in. Reasons to Use Remote VMs for Development (Not Testing!): Here are the stated reasons that this person wants us to use VMs: They work for TeamVM. They keep the source code "safe". If we want to work from home, we could just use our home PCs. Licenses (I don't know what the argument is, only that it's been used). Reasons not to use Remote VMs for Development: Here are the stated reasons why we don't want to use VMs: We like working from home. We get a lot done on our own time. We're not going to use our Home PCs to do work related stuff. The Latency is noticeable. Support for the VMs (if they go down, or if we need a new VM) takes a while. We don't have administrative privileges on the VM, and are unable to change settings as needed. What I'm looking for from the community is this: What reasons would you give for not using VMs for development? Keep in mind these are remote VMs -- this isn't a VM running on a local desktop. It's using the laptop (or a desktop) as a thin client for a remote VM. Also, on the other side of the coin: Is there something we're missing that makes VMs more palatable for development? Edit: I think 'safe' is used in term of corporate espionage, or more correctly if the Laptop gets stolen, the person who stole would have access to our source code. The former (as we've pointed out, is always going to be a possibility -- companies stop that with litigation, there isn't a technical solution (so far as I can see)). The latter point is ( though I don't know its usefulness in a corporate scenario) mitigated by Truecrypt'ing the entire volume.

  Read the article

• Create Your CRM Style

  - by Ruth

  Company branding can create a sense of spirit, belonging, familiarity, and fun. CRM On Demand has long offered company branding options, but now, with Release 17, those options have become quicker, easier, and more flexible. Themes (also known as Skins) allow you to customize the appearance of the CRM On Demand application for your entire company, or for individual roles. Users may also select the theme that works best for them. You can create a new theme in 5 minutes or less, but if you're anything like me, you may enjoy tinkering with it for a while longer. Before you begin tinkering, I recommend spending a few moments coming up with a design plan. If you have specific colors or logos you want for your theme, gather those first...that will move the process along much faster. If you want to match the color of an existing Web site or application, you can use tools, like Pixie, to match the HEX/HTML color values. Logos must be in a JPEG, JPG, PNG, or GIF file format. Header logos must be approximately 70 pixels high by 1680 pixels wide. Footer logos must be no more than 200 pixels wide. And, of course, you must have permission to use the images that you upload for your theme. Creating the theme itself is the simple part. Here are a few simple steps. Note: You must have the Manage Themes privilege to create custom themes. Click the Admin global link. Navigate to Application Customization Themes. Click New. Note: You may also choose to copy and edit and existing theme. Enter information for the following fields: Theme Name - Enter a name for your new theme. Show Default Help Link - Online help holds valuable information for all users, so I recommend selecting this check box. Show Default Training and Support Link - The Training and Support Center holds valuable information for all users, so I recommend selecting this check box. Description - Enter a description for your new theme. Click Save. Once you click Save, the Theme Detail page opens. From there, you can design your theme. The preview shows the Home, Detail, and List pages, with the new theme applied. For more detailed information about themes, click the Help link from any page in CRM On Demand Release 17, then search or browse to find the Creating New Themes page (Administering CRM On Demand Application Customization Creating New Themes). Click the Show Me link on that Help page to access the Creating Custom Themes quick guide. This quick guide shows how each of the page elements are defined.

  Read the article

• Put Unused Tabs on Hold in Firefox

  - by Asian Angel

  If you have a lot of content heavy webpages open in Firefox, it soon adds up on memory usage. The BarTab extension puts unused tabs on hold and keeps them unloaded until you are ready to access them. Before When you have a few tabs open things are not so bad. But if you have something like 30+ tabs open then Firefox is definitely going to have a much larger memory footprint. For the moment all six tabs are active in our example… After Once the extension is installed you can see quite a difference in the tab bar. Five of the six websites are literally on hold and display as about:blank. In the screenshot above all six tabs were restored from a previous session, but to put new tabs on hold the preferences will have to be modified. Notice that you can have active tabs placed on hold if you do not access them within a set time (“x” seconds, minutes, hours, or days). You may also add your favorite websites as exclusions. Newly opened tabs can now be placed on hold until you are ready for them. Need to place a currently accessed tab on hold? Use the tab context menu to unload the page. Once you use the tab context menu to place a tab on hold your browser will shift over to the closest active tab. You will notice the difference in memory usage when you put a lot of intensive pages on hold. Conclusion If you keep a high number of content heavy webpages open in Firefox then the BarTab extension will help reduce memory usage while browsing. Links Download the BarTab extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Quick Tip: Use Tab Characters in Textarea Boxes in FirefoxYou Really Want to Completely Disable Tabs in Firefox?Quick Hits: 11 Firefox Tab How-TosQuick Tip: Save Windows and Tabs When Restarting FirefoxMake Firefox Use Multiple Rows of Tabs TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows

  Read the article

• Using CTAS & Exchange Partition Replace IAS for Copying Partition on Exadata

  - by Bandari Huang

  Usage Scenario: Copy data&index from one partition to another partition in a partitioned table. Solution: Create a partition definition Copy data from one partition to another partiton by 'Insert as select (IAS)' Create a nonpartitioned table by 'Create table as select (CTAS)' Convert a nonpartitioned table into a partition of partitoned table by exchangng their data segments. Rebuild unusable index Exchange Partition Convertion Mutual convertion between a partition (or subpartition) and a nonpartitioned table Mutual convertion between a hash-partitioned table and a partition of a composite *-hash partitioned table Mutual convertiton a [range | list]-partitioned table into a partition of a composite *-[range | list] partitioned table. Exchange Partition Usage Scenario High-speed data loading of new, incremental data into an existing partitioned table in DW environment Exchanging old data partitions out of a partitioned table, the data is purged from the partitioned table without actually being deleted and can be archived separately Exchange Partition Syntax ALTER TABLE schema.table EXCHANGE [PARTITION|SUBPARTITION] [partition|subprtition] WITH TABLE schema.table [INCLUDE|EXCLUDING] INDEX [WITH|WITHOUT] VALIDATION UPDATE [INDEXES|GLOBAL INDEXES] INCLUDING | EXCLUDING INDEXES Specify INCLUDING INDEXES if you want local index partitions or subpartitions to be exchanged with the corresponding table index (for a nonpartitioned table) or local indexes (for a hash-partitioned table). Specify EXCLUDING INDEXES if you want all index partitions or subpartitions corresponding to the partition and all the regular indexes and index partitions on the exchanged table to be marked UNUSABLE. If you omit this clause, then the default is EXCLUDING INDEXES. WITH | WITHOUT VALIDATION Specify WITH VALIDATION if you want Oracle Database to return an error if any rows in the exchanged table do not map into partitions or subpartitions being exchanged. Specify WITHOUT VALIDATION if you do not want Oracle Database to check the proper mapping of rows in the exchanged table. If you omit this clause, then the default is WITH VALIDATION.  UPADATE INDEX|GLOBAL INDEX Unless you specify UPDATE INDEXES, the database marks UNUSABLE the global indexes or all global index partitions on the table whose partition is being exchanged. Global indexes or global index partitions on the table being exchanged remain invalidated. (You cannot use UPDATE INDEXES for index-organized tables. Use UPDATE GLOBAL INDEXES instead.) Exchanging Partitions&Subpartitions Notes Both tables involved in the exchange must have the same primary key, and no validated foreign keys can be referencing either of the tables unless the referenced table is empty.  When exchanging partitioned index-organized tables: – The source and target table or partition must have their primary key set on the same columns, in the same order. – If key compression is enabled, then it must be enabled for both the source and the target, and with the same prefix length. – Both the source and target must be index organized. – Both the source and target must have overflow segments, or neither can have overflow segments. Also, both the source and target must have mapping tables, or neither can have a mapping table. – Both the source and target must have identical storage attributes for any LOB columns. 

  Read the article

• Oracle ERP Cloud Solution Defines Revenue Recognition Software Market

  - by Steve Dalton

  Normal 0 false false false EN-US X-NONE X-NONE Revenue is a fundamental yardstick of a company's performance, and one of the most important metrics for investors in the capital markets. So it’s no surprise that the accounting standard boards have devoted significant resources to this topic, with a key goal of ensuring that companies use a consistent method of recognizing revenue. Due to the myriad of revenue-generating transactions, and the divergent ways organizations recognize revenue today, the IFRS and FASB have been working for 12 years on a common set of accounting standards that apply to all industries in virtually all countries. Through their joint efforts on May 28, 2014 the FASB and IFRS released the IFRS 15 / ASU 2014-9 (Revenue from Contracts with Customers) converged accounting standard. This standard applies to revenue in all public companies, but heavily impacts organizations in any industry that might have complex sales contracts with multiple distinct deliverables (obligations). For example, an auto dealer who bundles free service with the sale of a car can only recognize the service revenue once the owner of the car brings it in for work. Similarly, high-tech companies that bundle software licenses, consulting, and support services on a sales contract will recognize bundled service revenue once the services are delivered. Now all companies need to review their revenue for hidden bundling and implicit obligations. Numerous time-consuming and judgmental activities must be performed to properly recognize revenue for complex sales contracts. To illustrate, after the contract is identified, organizations must identify and examine the distinct deliverables, determine the estimated selling price (ESP) for each deliverable, then allocate the total contract price to each deliverable based on the ESPs. In terms of accounting, organizations must determine whether the goods or services have been delivered or performed to the customer’s satisfaction, then either book revenue in the current period or record a liability for the obligation if revenue will be recognized in a future accounting period. Oracle Revenue Management Cloud was architected and developed so organizations can simplify and streamline revenue recognition. Among other capabilities, the solution uses business rules to efficiently identify and examine contracts, intelligently calculate and allocate deliverable prices based on prescribed inputs, and accurately recognize revenue for each deliverable based on customer satisfaction. "Oracle works very closely with our customers, the Big 4 accounting firms, and the accounting standard boards to deliver an adaptive, comprehensive, new generation revenue recognition solution,” said Rondy Ng, Senior Vice President, Applications Development. “With the recently announced IFRS 15 / ASU 2014-9, Oracle is ready to support customer adoption of the new standard with our Revenue Management Cloud,” said Rondy. Oracle Revenue Management Cloud, an integral part of Oracle Financials Cloud, helps organizations comply with accounting standards, provides them with confidence that reported revenue is materially accurate, and simplifies the accounting process for revenue recognition. Stay tuned to this blog for regular updates on Oracle Revenue Management Cloud. We also invite you to review our new oracle.com ERP pages @ oracle.com/erp. We will be updating these pages very soon with more information about Oracle Revenue Management Cloud.

  Read the article

• composite-video-to-usb adaptor

  - by sawa

  I bought a composite-video-to-usb adaptor. I want to stream video game in ubuntu. How can I do that? My environment: Monoprice USB Video and Audio Grabber Ubuntu 11.04 The relevant output of lsusb: Bus 001 Device 011: ID 0572:262a Conexant Systems (Rockwell), Inc. The relevant output of sudo lshw: *-usb:0 description: USB Controller product: 82801JI (ICH10 Family) USB UHCI Controller #4 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 00 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f0e0(size=32) *-usb:1 description: USB Controller product: 82801JI (ICH10 Family) USB UHCI Controller #5 vendor: Intel Corporation physical id: 1a.1 bus info: pci@0000:00:1a.1 version: 00 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 resources: irq:21 ioport:f0c0(size=32) *-usb:2 description: USB Controller product: 82801JI (ICH10 Family) USB UHCI Controller #6 vendor: Intel Corporation physical id: 1a.2 bus info: pci@0000:00:1a.2 version: 00 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f0a0(size=32) *-usb:3 description: USB Controller product: 82801JI (ICH10 Family) USB2 EHCI Controller #2 vendor: Intel Corporation physical id: 1a.7 bus info: pci@0000:00:1a.7 version: 00 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:18 memory:e0525c00-e0525fff *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:e0520000-e0523fff *-usb:4 description: USB Controller product: 82801JI (ICH10 Family) USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 00 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f080(size=32) *-usb:5 description: USB Controller product: 82801JI (ICH10 Family) USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 00 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f060(size=32) *-usb:6 description: USB Controller product: 82801JI (ICH10 Family) USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 00 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f040(size=32) *-usb:7 description: USB Controller product: 82801JI (ICH10 Family) USB2 EHCI Controller #1 vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 00 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:e0525800-e0525bff The relevant output of dmesg: [18953.220035] usb 1-1: new high speed USB device using ehci_hcd and address 6 [19964.761076] Linux video capture interface: v2.00 [19964.767112] usbcore: registered new interface driver uvcvideo [19964.767115] USB Video Class driver (v1.0.0)

  Read the article

• Partner Webcast – More out of ODA with DB Options - 19 July 2012

  - by Thanos

  The Simple, Reliable, Affordable Path to High-Availability Databases Critical business data needs to be available 24/7 for users and customers, but it can be a struggle to find the time and resources to build a highly available database system that’s reliable and affordable. That’s why Oracle created the new Oracle Database Appliance—a complete package of software, server, storage, and networking. The Oracle Database Appliance integrates the world’s most popular database - Oracle Database 11g  - with system software, servers, storage and networking in a single box. Business gets the benefit of a reliable, secure and highly available database to support applications and maintain continuity – as well as groundbreaking ease of use. But that is not all, with the support for all Oracle Database Options, Oracle Database Appliance can be the ideal solution for many use cases. The benefits?   Unmatched performance, reliability & security for your data that’s there when you need it – which is all the time. Fast installation, simple deployment, easy management. Out of the box. Significant cost savings & reduced risk and complexity compared to integrating all the elements yourself. Ongoing lower total cost of ownership with multiple automated support, detection & correction functions that also save you time.   Discover the Oracle Database Appliance Value Proposition and learn how to position and combine it with database options to capture new business and easily roll out solutions safely and with maximum cost efficiency. Agenda: Oracle Database& Engineered Systems Innovation. What’s the Oracle Database Appliance ? Oracle Database Appliance Value Proposition. Oracle Database Appliance with Database Options Oracle Database Appliance Partners Business Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Duration: 1 hour Register Now! For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com Visit regularly our ISV Migration Center blog Or Follow us @oracleimc to learn more on Oracle Technologies as well as upcoming partner webcasts and events.

  Read the article

• Database Developer - October 2013 issue: Download Database 12c and related products

  - by Javier Puerta

  The October issue of the Database Application Developer  newsletter is now available. The focus of this issue is on downloads of Database 12c and related products. (Full newsletter here) Get Ready to Download, Deploy and Develop for Oracle Database 12c This month we're focused on downloads. We've rounded up the top developer releases (both early adopter and BETA releases) and the articles that will help you do more with Oracle 12c. See the technical content that will help you get started. If you're ready...Away we go! — Laura Ramsey, Database and Developer Community, Oracle Technology Network Team FEATURED DOWNLOADS Download: Oracle Database 12c According Tom Kyte, the Oracle 12c version has some of the biggest enhancements to the core database since version 6 - Check it out for yourself. Download: Oracle SQL Developer 4.0 Early Adopter 2 is Here Oracle SQL Developer is a free IDE that simplifies the development and management of Oracle Database. It is a complete end-to-end development platform for your PL/SQL applications that features a worksheet for running queries and scripts, a DBA console for managing the database, a reports interface, a complete data modeling solution and a migration platform for moving your 3rd party databases to Oracle.  If you are interested in checking out this new early adopter version,Oracle SQL Developer 4.0 EA is the place to go. Download: Oracle 12c Multitenant Self Provisioning Application -BETA- The -BETA- is here. The Multitenant self provisioning Application is an easy and productive way for DBAs and Developers to get familiar with powerful PDB features including create, clone, plug and unplug.   No better time to start playing with PDBs. Oracle 12c Multitenant Self Provisioning Application. Download: New! Updates to Oracle Data Integration Portfolio Oracle GoldenGate 12c and Oracle Data Integrator 12c is now available. From Real-Time data integration, transactional change data capture, data replication, transformations....to hi-volume, high-performance batch loads, event-driven, trickle-feed integration process..its now available. Go here all the details and links to downloads...and Congratulations Data Integration Team!. Download: Oracle VM Templates for Oracle 12c Features Support for Single Instance, Oracle Restart and Oracle RAC Support for all current Oracle Database 11.2 versions as well as Oracle 12c on Oracle Linux 5 Update 9 & Oracle Linux 6 Update 4. The Oracle 12c templates allow end-to-end automation for Flex Cluster, Flex ASM and PDBs. See how the Deploycluster tool was updated to support Single Instance and the new Oracle 12c features. Oracle VM Templates for Oracle Database. Download: Oracle SQL Developer Data Modeler 4.0 EA 3 If you're looking for a datamodeling and database design tool that provides an environment for capturing, modeling, managing and exploiting metadata, it's time to check out Oracle SQL Developer Data Modeler. Oracle SQL Developer Data Modeler 4.0 EA V3 is here.

  Read the article

• Database Developer - October 2013 issue: Download Database 12c and related products

  - by Javier Puerta

  The October issue of the Database Application Developer  newsletter is now available. The focus of this issue is on downloads of Database 12c and related products. (Full newsletter here) Get Ready to Download, Deploy and Develop for Oracle Database 12c This month we're focused on downloads. We've rounded up the top developer releases (both early adopter and BETA releases) and the articles that will help you do more with Oracle 12c. See the technical content that will help you get started. If you're ready...Away we go! — Laura Ramsey, Database and Developer Community, Oracle Technology Network Team FEATURED DOWNLOADS Download: Oracle Database 12c According Tom Kyte, the Oracle 12c version has some of the biggest enhancements to the core database since version 6 - Check it out for yourself. Download: Oracle SQL Developer 4.0 Early Adopter 2 is Here Oracle SQL Developer is a free IDE that simplifies the development and management of Oracle Database. It is a complete end-to-end development platform for your PL/SQL applications that features a worksheet for running queries and scripts, a DBA console for managing the database, a reports interface, a complete data modeling solution and a migration platform for moving your 3rd party databases to Oracle.  If you are interested in checking out this new early adopter version,Oracle SQL Developer 4.0 EA is the place to go. Download: Oracle 12c Multitenant Self Provisioning Application -BETA- The -BETA- is here. The Multitenant self provisioning Application is an easy and productive way for DBAs and Developers to get familiar with powerful PDB features including create, clone, plug and unplug.   No better time to start playing with PDBs. Oracle 12c Multitenant Self Provisioning Application. Download: New! Updates to Oracle Data Integration Portfolio Oracle GoldenGate 12c and Oracle Data Integrator 12c is now available. From Real-Time data integration, transactional change data capture, data replication, transformations....to hi-volume, high-performance batch loads, event-driven, trickle-feed integration process..its now available. Go here all the details and links to downloads...and Congratulations Data Integration Team!. Download: Oracle VM Templates for Oracle 12c Features Support for Single Instance, Oracle Restart and Oracle RAC Support for all current Oracle Database 11.2 versions as well as Oracle 12c on Oracle Linux 5 Update 9 & Oracle Linux 6 Update 4. The Oracle 12c templates allow end-to-end automation for Flex Cluster, Flex ASM and PDBs. See how the Deploycluster tool was updated to support Single Instance and the new Oracle 12c features. Oracle VM Templates for Oracle Database. Download: Oracle SQL Developer Data Modeler 4.0 EA 3 If you're looking for a datamodeling and database design tool that provides an environment for capturing, modeling, managing and exploiting metadata, it's time to check out Oracle SQL Developer Data Modeler. Oracle SQL Developer Data Modeler 4.0 EA V3 is here.

  Read the article

• Silverlight Cream for June 19, 2011 -- #1109

  - by Dave Campbell

  In this Issue: Kunal Chowdhury(-2-), Oren Gal, Rudi Grobler, Stephen Price, Erno de Weerd, Joost van Schaik, WindowsPhoneGeek, Andrea Boschin, and Vikram Pendse. Above the Fold: Silverlight: "Multiple Page Printing in Silverlight4 - Part 3 - Printing Driving Directions" Oren Gal WP7: "Prototyping Windows Phone 7 Applications using SketchFlow" Vikram Pendse Shoutouts: Not Silverlight, but darned cool... Michael Crump has just what you need to get going with Kinect: The busy developers guide to the Kinect SDK Beta Rudi Grobler replies to a few questions about how he gets great WP7 screenshots: Screenshot Tools for WP7 From SilverlightCream.com: Windows Phone 7 (Mango) Tutorial - 14 - Detecting Network Information of the Device Squeaking in just under the posting wire with 2 more WP7.1 posts is Kunal Chowdhury ... first up is this one on grabbing the mobile operator and othe rnetwork info in WP7.1 Windows Phone 7 (Mango) Tutorial - 15 - Detecting Device Information Kunal Chowdhury's latest is on using the DeviceStatus class in WP7.1 to detect device information such as is there is a physical keyboard installed, Memory Usage, Total Memory, etc. Multiple Page Printing in Silverlight4 - Part 3 - Printing Driving Directions Oren Gal has the final episode in his Multiple Page Printing Tutorial Trilogy up... and this is *way* cool... Printing the driving directions. AgFx hidden gem - PhoneApplicationFrameEx Rudi Grobler continues his previous post about AgFX with this one talking about the PhoneApplicationFrameEx class inside AgFx.Controls.Phone.dll.. a RootFrame replacement. Binding to ActualHeight or ActualWidth Stephen Price's latest XAML snippet is about Binding to ActualHeight or ActualWidth... you've probably tried to without luck... check out the workaround. Windows Phone 7: Drawing graphics for your application with Inkscape – Part I: Tiles Erno de Weerd decided to try the 'free' route to Drawing graphics for his WP7 app, and has part 1 of a tutorial series on doing that with Inkscape. Mogade powered Live Tile high score service for Windows Phone 7 Joost van Schaik expounds on his "Catch 'em Birds" WP7 game in the Marketplace... specifically the online leaderboard using the services of Mogade. Building a Reusable ICommand implementation for Windows Phone Mango MVVM apps WindowsPhoneGeek's latest post is discussing the ICommand interface available in WP7.1, and he demontstrates how to implement a reusable ICommand Implementation and how to use it. A TCP Server with Reactive Extensions Andrea Boschin is back posting about Rx, and promises this post *will be* Silverlight related eventually :) First up though is a socket server using Rx. Prototyping Windows Phone 7 Applications using SketchFlow Vikram Pendse has a tutorial up for prototyping your WP7* apps in Sketchflow including a 5 minute video Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

  - by user203963

  i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >