Search Results

Search found 15820 results on 633 pages for 'domain transfer'.

Page 226/633 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

  • Strange DNS issue with internal Windows DNS

    - by Brady
    I've encountered a strange issue with our internal Windows DNS infrastructure. We have a website hosted on Amazon EC2 with the DNS running on Amazon Route 53. In the publicly facing DNS we have the wildcard record setup as an A record Alias pointing to an AWS Elastic Load Balancer sitting in front of our EC2 instances. For those who are not aware, the A record Alias behaves like a CNAME record, however no extra lookup is required on the client side (See http://docs.amazonwebservices.com/Route53/latest/DeveloperGuide/CreatingAliasRRSets.html for more information). We have a secondary domain that has the www subdomain as a CNAME pointing to a subdomain on the primary domain, which resolves against the wildcard entry. For example the subdomain www.secondary.com is a CNAME to sub1.primary.com, but there is no explicit entry for sub1.primary.com, so it resolves to wildcard record. This setup work without issue publicly. The issue comes in our internal DNS at our corporate office where we use the same primary domain for some internal only facing sites. In this setup we have two Active Directory DNS servers with one Server 2003 and one Server 2008 R2 instance. The zone is an AD integrated zone, but it is not the AD domain. In the internal DNS we have the wildcard record pointing to a third external domain, that is also hosted on Route 53 with an A record Alias pointing to the same ELB instance. For example, *.primary.com is a CNAME to tertiary.com, so in effect you have www.secondary.com as a CNAME to *.primary.com, which is a CNAME to tertiary.com. In this setup, attempting to resolve www.secondary.com will fail. Clearing the cache on the Server 2003 instance will allow it to resolve once, but subsequent attempts will fail. It fails even with a clean cache against the 2008 R2 server. It seems that only Windows clients are affected. A Mac running OSX Mountain Lion does not experience this issue. I'm even able to replicate the issue using nslookup. Against the 2003 server, with a freshly cleaned cache, I recieve the appropriate response from www.secondary.com: Non-authoritative answer: Name: subdomain.primary.com Address: x.x.x.x (Public IP) Aliases: www.secondary.com Subsequent checks simply return: Non-authoritative answer: Name: www.secondary.com If you set the type to CNAME you get the appropriate responses all the time. www.secondary.com gives you: Non-authoritative answer: www.secondary.com canonical name = subdomain.primary.com And subdomain.primary.com gives you: subdomain.primary.com canonical name = tertiary.com And setting type back to A gives you the appropriate response for tertiary.com: Non-authoritative answer: Name: tertiary.com Address: x.x.x.x (Public IP) Against the 2008 R2 server things are a little different. Even with a clean cache, www.secondary.com returns just: Non-authoritative answer: Name: www.secondary.com The CNAME records are returned appropriately. www.secondary.com returns: Non-authoritative answer: www.secondary.com canonical name = subdomain.primary.com And subdomain.primary.com gives you: subdomain.primary.com canonical name = tertiary.com tertiary.com internet address = x.x.x.x (Public IP) tertiary.com AAAA IPv6 address = x::x (Public IPv6) And setting type back to A gives you the appropriate response for tertiary.com: Non-authoritative answer: Name: tertiary.com Address: x.x.x.x (Public IP) Requests directly against subdomain.primary.com work correctly.

    Read the article

  • Yet another (13)Permission denied error on Apache2 server

    - by lollercoaster
    I just can't figure it out. I'm running apache2 on a Ubuntu 10.04 i386 server. Whenever I visit my server (has an IP address, and is connected to internet with static IP xxx.xxx.xxx.xxx) so that's not the problem) in browser, mysub.domain.edu (renamed here), I get the following: Forbidden You don't have permission to access /index.html on this server The apache2 error log confirms this: [Mon Apr 18 02:38:20 2011] [error] [client zzz.zzz.zzz.zzz] (13)Permission denied: access to / denied I'll try to provide all necessary information below: 1) Contents of /etc/apache2/httpd.conf DirectoryIndex index.html index.php 2) Contents of /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 3) Contents of /etc/apache2/sites-enabled/000-default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 4) Result of ls -l (when I'm using sudo -i to be root): root@myserver:/home/myusername# ls -l total 4 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 htdocs 5) ps auxwww | grep -i apache root@myserver:/home# ps auxwww | grep -i apache root 15121 0.0 0.4 5408 2544 ? Ss 16:55 0:00 /usr/sbin/apache2 -k start www-data 15122 0.0 0.3 5180 1760 ? S 16:55 0:00 /usr/sbin/apache2 -k start www-data 15123 0.0 0.5 227020 2788 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start www-data 15124 0.0 0.5 227020 2864 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start root 29133 0.0 0.1 3320 680 pts/0 R+ 16:58 0:00 grep --color=auto -i apache 6) ls -al /home/myusername/htdocs/ root@myserver:/# ls -al /home/myusername/htdocs/ total 20 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 . drw-r--r-- 4 myusername myusername 4096 2011-04-18 02:13 .. -rw-r--r-- 1 root root 69 2011-04-18 02:14 index.html I'm not currently using any .htaccess files in my web root (htdocs) folder in my user folder. I don't know what is wrong, I've been trying to fix his for over 12 hours and I've gotten nowhere. If you have any suggestions, I'm all ears...

    Read the article

  • Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a new account

    - by TrevJen
    Sharepoint 2007 MOSS with AD imported users. All servers are 2008. ***UPDATE More details in testing. This Sharepoint is in an AD Child domain (clients.mycompany.local), which is sub to the root of the AD tree (mycompany.local). The user is in the parent tree (as are half of the other functional users. I have elevated the user rights to Domain. In looking at the logs, it seems that the Sharepoint server is trying to authenticate them by querying the DC for the clients domain (which is the way it normally works and still works for all existing identically configured users). I think if I could force it to authenticate up to the top domain DC then it would be ok?? I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. Logs by request from matt b Office SharePoint Server Date: 4/13/2010 2:00:00 PM Event ID: 7888 Task Category: Office Server General Level: Error Keywords: Classic User: N/A Computer: nb-portal-01.clients.netboundary.local Description: A runtime exception was detected. Details follow. Message: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) – TrevJen 19 hours ago Techinal Details: System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException ex) at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML) at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed) – TrevJen 19 hours ago at Microsoft.SharePoint.SPField.Update() at Microsoft.Office.Server.UserProfiles.SiteSynchronizer.UserSynchronizer.PushSchemaToList(Boolean& bAddedColumn) at Microsoft.Office.Server.UserProfiles.SiteSynchronizer.UserSynchronizer.SynchFull() at Microsoft.Office.Server.UserProfiles.SiteSynchronizer.Synch() at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock) – TrevJen 19 hours ago Log Name: Application Source: Office SharePoint Server Date: 4/13/2010 2:00:00 PM Event ID: 5553 Task Category: User Profiles Level: Error Keywords: Classic User: N/A Computer: nb-portal-01.clients.netboundary.local Description: failure trying to synch site 6fea15e2-0899-4c19-9016-44d77834c018 for ContentDB b2002b0b-3d4c-411a-8c4f-3d047ca9322c WebApp 3aff7051-455d-4a70-a377-5b1c36df618e. Exception message was Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)). – TrevJen 18 hours ago

    Read the article

  • Postfix on Snow Leopard unable to send MIME emails, including header contents in message body

    - by devvy
    I configured postfix on snow leopard by adding the following line to /etc/hostconfig: MAILSERVER=-YES- I then configured postfix to relay through my ISP's SMTP server. I added the following two lines in their respective places within /etc/postfix/main.cf: myhostname = 1and1.com relayhost = shawmail.vc.shawcable.net I then have a simple PHP mail function wrapper as follows: send_email("[email protected]", "[email protected]", "Test Email", "<p>This is a simple HTML email</p>"); echo "Done"; function send_email($from,$to,$subject,$message){ $header="From: <".$from."> "; $header.= 'MIME-Version: 1.0' . " "; $header.= 'Content-type: text/html; charset=iso-8859-1' . " "; $send_mail=mail($to,$subject,$message,$header); if(!$send_mail){ echo "ERROR"; } } With this, I am receiving an e-mail that appears to be improperly formatted. The message header is showing up in the body of the e-mail. The raw message content is as follows: Return-Path: <[email protected]> Delivery-Date: Tue, 27 Apr 2010 18:12:48 -0400 Received: from idcmail-mo2no.shaw.ca (idcmail-mo2no.shaw.ca [64.59.134.9]) by mx.perfora.net (node=mxus2) with ESMTP (Nemesis) id 0M4XlU-1NCtC81GVY-00z5UN for [email protected]; Tue, 27 Apr 2010 18:12:48 -0400 Message-Id: <[email protected]> Received: from pd6ml3no-ssvc.prod.shaw.ca ([10.0.153.149]) by pd6mo1no-svcs.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:47 -0600 X-Cloudmark-SP-Filtered: true X-Cloudmark-SP-Result: v=1.0 c=1 a=VphdPIyG4kEA:10 a=hATtCjKilyj9ZF5m5A62ag==:17 a=mC_jT1gcAAAA:8 a=QLyc3QejAAAA:8 a=DGW4GvdtALggLTu6w9AA:9 a=KbDtEDGyCi7QHcNhDYYwsF92SU8A:4 a=uch7kV7NfGgA:10 a=5ZEL1eDBWGAA:10 Received: from unknown (HELO 1and1.com) ([24.84.196.104]) by pd6ml3no-dmz.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:48 -0600 Received: by 1and1.com (Postfix, from userid 70) id BB08D14ECFC; Tue, 27 Apr 2010 15:12:47 -0700 (PDT) To: [email protected] Subject: Test Email X-PHP-Originating-Script: 501:test.php Date: Tue, 27 Apr 2010 18:12:48 -0400 X-UI-Junk: AutoMaybeJunk +30 (SPA); V01:LYI2BGRt:7TwGx5jxe8cylj5nOTae9JQXYqoWvG2w4ZSfwYCXmHCH/5vVNCE fRD7wNNM86txwLDTO522ZNxyNHhvJUK9d2buMQuAUCMoea2jJHaDdtRgkGxNSkO2 v6svm0LsZikLMqRErHtBCYEWIgxp2bl0W3oA3nIbtfp3li0kta27g/ZjoXcgz5Sw B8lEqWBqKWMSta1mCM+XD/RbWVsjr+LqTKg== Envelope-To: [email protected] From: <[email protected]> MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 Message-Id: <[email protected]> Date: Tue, 27 Apr 2010 15:12:47 -0700 (PDT) <p>This is a simple HTML email</p> And here are the contents of my /var/log/mail.log file after sending the email: Apr 27 15:29:01 User-iMac postfix/qmgr[705]: 74B1514EDDF: removed Apr 27 15:29:30 User-iMac postfix/pickup[704]: 25FBC14EDF0: uid=70 from=<_www> Apr 27 15:29:30 User-iMac postfix/master[758]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable Apr 27 15:29:30 User-iMac postfix/cleanup[745]: 25FBC14EDF0: message-id=<[email protected]> Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: from=<[email protected]>, size=423, nrcpt=1 (queue active) Apr 27 15:29:30 User-iMac postfix/smtp[747]: 25FBC14EDF0: to=<[email protected]>, relay=shawmail.vc.shawcable.net[64.59.128.135]:25, delay=0.21, delays=0.01/0/0.1/0.1, dsn=2.0.0, status=sent (250 ok: Message 25784419 accepted) Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: removed Two other people in the office have followed the exact same process and are running the exact same script, version of snow leopard, php, etc. and everything is working fine for them. I've even copied their config files to my machine, restarted postfix, restarted apache, all to no avail. Does anyone know what steps I could take to resolve the issue? This is boggling my mind... Thanks

    Read the article

  • warning: dict_ldap_lookup: Search error 1: Operations error

    - by drecute
    Please I need help with ldap search filter to use to retrieve the user email information from ldap. I'm running postfix_ldap of Ubuntu server 12.04. Everything seems to work fine, except getting the values returned from the search. Version 1 server_host = ldap://samba.example.com search_base = dc=company, dc=example, dc=com query_filter = mail=%s bind = no domain = example.com Version 2 server_host = ldap://samba.example.com search_base = dc=company, dc=example, dc=com query_filter = mail=%s bind_dn = cn=Users,dc=company,dc=example,dc=com domain = example.com mail logs Nov 26 11:13:26 mail postfix/smtpd[19662]: match_string: example.com ~? example.com Nov 26 11:13:26 mail postfix/smtpd[19662]: dict_ldap_lookup: No existing connection for LDAP source /etc/postfix/ldap-aliases.cf, reopening Nov 26 11:13:26 mail postfix/smtpd[19662]: dict_ldap_connect: Connecting to server ldap://samba.example.com Nov 26 11:13:26 mail postfix/smtpd[19662]: dict_ldap_connect: Actual Protocol version used is 3. Nov 26 11:13:26 mail postfix/smtpd[19662]: dict_ldap_connect: Binding to server ldap://samba.example.com with dn cn=Users,dc=company,dc=example,dc=com Nov 26 11:13:26 mail postfix/smtpd[19662]: warning: dict_ldap_connect: Unable to bind to server ldap://samba.example.com with dn cn=Users,dc=company,dc=example,dc=com: 49 (Invalid credentials) Nov 26 11:13:26 mail postfix/smtpd[19662]: warning: ldap:/etc/postfix/ldap-aliases.cf lookup error for "[email protected]" Nov 26 11:13:26 mail postfix/smtpd[19662]: maps_find: virtual_alias_maps: [email protected]: search aborted Nov 26 11:13:26 mail postfix/smtpd[19662]: mail_addr_find: [email protected] -> (try again) Nov 26 11:13:26 mail postfix/smtpd[19662]: NOQUEUE: reject: RCPT from col0-omc3-s2.col0.hotmail.com[65.55.34.140]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<col0-omc3-s2.col0.hotmail.com> Nov 26 11:13:26 mail postfix/smtpd[19662]: > col0-omc3-s2.col0.hotmail.com[65.55.34.140]: 451 4.3.0 <[email protected]>: Temporary lookup failure here's another log with successful search result but fialed to get the values of the result Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: Using existing connection for LDAP source /etc/postfix/ldap-aliases.cf Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: /etc/postfix/ldap-aliases.cf: Searching with filter [email protected] Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_get_values[1]: Search found 1 match(es) Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_get_values[1]: Leaving dict_ldap_get_values Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: Search returned nothing Nov 26 12:04:56 mail postfix/smtpd[20463]: maps_find: virtual_alias_maps: [email protected]: not found Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: In dict_ldap_lookup Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: /etc/postfix/ldap-aliases.cf: Skipping lookup of key 'tola.akintola': domain mismatch Nov 26 12:04:56 mail postfix/smtpd[20463]: maps_find: virtual_alias_maps: tola.akintola: not found Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: In dict_ldap_lookup Nov 26 12:04:56 mail postfix/smtpd[20463]: dict_ldap_lookup: /etc/postfix/ldap-aliases.cf: Skipping lookup of key '@example.com': domain mismatch Nov 26 12:04:56 mail postfix/smtpd[20463]: maps_find: virtual_alias_maps: @example.com: not found Nov 26 12:04:56 mail postfix/smtpd[20463]: mail_addr_find: [email protected] -> (not found) My refined ldap-aliases.cf looks like this: server_host = ldap://samba.example.com server_port = 3268 search_base = dc=company, dc=example, dc=com query_filter = mail=%s result_attribute = uid bind_dn = cn=Administrator,cn=Users,dc=company,dc=example,dc=com bind_pw = pass domain = example.com So I'll like to know what ldap filter is appropriate to get this to work. Thanks for helping out.

    Read the article

  • phpmyadmin login redirect fails with custom ssl port

    - by baraboom
    The server is running Ubuntu 10.10, Apache 2.2.16, PHP 5.3.3-1ubuntu9.3, phpMyAdmin 3.3.7deb5build0.10.10.1. Since this same server is also running Zimbra on port 443, I've configured apache to serve SSL on port 81. So far, I have one CMS script running on this virtual host successfully. However, when I access /phpmyadmin (set up with the default alias) on my custom ssl port and submit the login form, I am redirected to http://vhost.domain.com:81/index.php?TOKEN=foo (note the http:// instead of the https:// that the login url was using). This generates an Error 400 Bad Request complaining about "speaking plain HTTP to an SSL-enabled server port." I can then manually change the http:// to https:// in the URL and use phpmyadmin as expected. I was annoyed enough to spend an hour trying to fix it and now even more annoyed that I cannot figure it out. I've tried various things, including: Adding $cfg['PmaAbsoluteUri'] = 'https://vhost.domain.com:81/phpmyadmin/'; to the /usr/share/phpmyadmin/config.inc.php file but this did not correct the problem (even though /usr/share/phpmyadmin/libraries/auth/cookie.auth.lib.php looks like it should honor it and use it as the redirect). Adding $cfg['ForceSSL'] = 1; to the same config.inc.php but then apache spirals into an infinite redirect. Adding a rewrite rule to the vhost-ssl conf file in apache but I was unable to figure out the condition to use when http:// was present along with the correct ssl port of :81. Lots of googling. Here are the relevant Apache configuration pieces: /etc/apache2/ports.conf <IfModule mod_ssl.c> NameVirtualHost *:81 Listen 81 </IfModule> /etc/apache2/sites-enabled/vhost-nonssl <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName vhost.domain.com DocumentRoot /home/xxx/sites/vhost/html RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}:81%{REQUEST_URI} </Virtualhost> /etc/apache2/sites-enabled/vhost-ssl <VirtualHost *:81> ServerAdmin webmaster@localhost ServerName vhost.domain.com DocumentRoot /home/xxx/sites/vhost/html <Directory /> Options FollowSymLinks AllowOverride None AuthType Basic AuthName "Restricted Vhost" AuthUserFile /home/xxx/sites/vhost/.users Require valid-user </Directory> <Directory /home/xxx/sites/vhost/html/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> /etc/apache2/conf.d/phpmyadmin.conf Alias /phpmyadmin /usr/share/phpmyadmin (The rest of the default .conf truncated.) Everything in the apache config seems to work ok - the rewrite from non-ssl to ssl, the http authentication, the problem only happens when I am submitting the login form for phpmyadmin from https://vhost.domain.com:81/index.php. Other configs: The phpmyadmin config is completely default and the php.ini has only had some minor changes to memory and timeout limits. These seem to work fine, as mentioned, another php script runs with no problem and phpmyadmin works great once I manually enter in the correct schema after login. I'm looking for either a bandaid I can add to save me the trouble of manually entering in the https:// after login, a real fix that will make phpmyadmin behave as I think it should or some greater understanding of why my desired config is not possible.

    Read the article

  • How to validate referral support implemented for Active Dircetory server?

    - by user146560
    Please suggest me some utility or application, using which i want to test referral settings done. I want to test cross forest referenced reference. Among two DNS say 1 firstDNS.com user([email protected]) 2 SecondDNS.com user([email protected]) Below java code written to test active directory server setting. public void authenticateUser(String user, String password, String domain) throws AuthenticationException, NamingException { List<String> ldapServers = findLDAPServersInWindowsDomain("first.com"); if (ldapServers.isEmpty()) throw new NamingException("Can't locate an LDAP server (try nslookup type=SRV _ldap._tcp." + "first.com"+ ")"); Hashtable<String, String> props = new Hashtable<String, String>(); String principalName = "testUserFirst"+ "@" + "First.com"; props.put(Context.SECURITY_PRINCIPAL, principalName); props.put(Context.SECURITY_CREDENTIALS, password); props.put(Context.REFERRAL,"follow"); //props.put(Context.SECURITY_AUTHENTICATION, "anonymous"); Integer count = 0; for (String ldapServer : ldapServers) { try { count++; DirContext ctx = LdapCtxFactory.getLdapCtxInstance("ldap://" + ldapServer, props); SearchControls searchCtls = new SearchControls(); //Specify the attributes to return String returnedAtts[]={"sn","givenName","mail"}; searchCtls.setReturningAttributes(returnedAtts); //Specify the search scope searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE); //specify the LDAP search filter String searchFilter = "(&(objectClass=user)(sAMAccountName=" testUserSecond)(userPassword=usertest@3))"; //Specify the Base for the search String searchBase = "DC=second,DC=com"; //initialize counter to total the results int totalResults = 0; // Search for objects using the filter NamingEnumeration<SearchResult> answer = ctx.search(searchBase, searchFilter, searchCtls); return; } catch (CommunicationException e) { // this is what'll happen if one of the domain controllers is unreachable if (count.equals(ldapServers.size())) { // we've got no more servers to try, so throw the CommunicationException to indicate that we failed to reach an LDAP server throw e; } } } } private List<String> findLDAPServersInWindowsDomain(String domain) throws NamingException { List<String> servers = new ArrayList<String>(); Hashtable<String, String> env = new Hashtable<String, String>(); env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory"); env.put("java.naming.provider.url", "dns://"); DirContext ctx = new InitialDirContext(env); Attributes attributes = ctx.getAttributes("_ldap._tcp." + domain, new String[] { "SRV" }); // that's how Windows domain controllers are registered in DNS Attribute a = attributes.get("SRV"); for (int i = 0; i < a.size(); i++) { String srvRecord = a.get(i).toString(); // each SRV record is in the format "0 100 389 dc1.company.com." // priority weight port server (space separated) servers.add(srvRecord.split(" ")[3]); } ctx.close(); return servers; }

    Read the article

  • SQL Server 2000 and SSL Encryption

    - by Angry_IT_Guru
    We are a datacenter that hsots a SQL Server 2000 environment which provides database services for a product we sell that is loaded as a rich-client applicatin at each of our many clients and their workstations. Currently today, the application uses straight ODBC connections from the client site to our datacenter. We need to begin encrypting the credentials -- since everything is clear-text today and the authentication is weakly encrypted -- and I'm trying to determine the best way to implement SSL on the server with minimizing the impact of the client. A few things, however: 1) We have our own Windows domain and all our servers are joined to our private domain. Our clietns no nothing of our domain. 2) Typically, our clients connect to our datacenter servers either by: a) Using TCP/IP address b) Using a DNS name that we publish via internet, zone transfers from our DNS servers to our customers, or the client can add static HOSTS entries. 3) From what I understand from enabling encryption is that I can go to the Network Utility and select the "encryption" option for the protocol that I wish to encrypt. Such as TCP/IP. 4) When the encryption option is selected, I have a choice of installing a third-party certificate or a self-signed. I have tested the self-signed, but do have potential issues. I'll explain in a bit. If I go with a third-party cert, such as Verisign, or Network solutions... what kind of certificate do I request? These aren't IIS certificates? When I go create a self-signed via Microsoft's certificate server, I have to select "Authentication certificate". What does this translate to in the third-party world? 5) If I create a self-signed certificate, I understand that the "issue to" name has to match the FQDN for the server that is running SQL. In my case, I have to use my private domain name. If I use this, what does this do for my clients when trying to connect to my SQL Server? Surely they cannot resolve my private DNS names on their network.... I've also verified that when the self-signed certificate is installed, it has to be in the local personal store for the user account that is running SQL Server. SQL Server will only start if the FQDN matches the "issue to" of the certificate and SQL is running under the account that has the certificate installed. If I use a self-signed certificate, does this mean I have to have every one of my clients install it to verify? 6) If I used a third-party certificate, which sounds like the best option, do all my clients have to have internet access when accessing my private servers of their private WAN connection to use to verify the certificate? What do I do about the FQDN? It sounds like they have to use my private domain name -- which is not published -- and can no longer use the one that I setup for them to use? 7) I plan on upgrading to SQL 2000 soon. Is setup of SSL any easier/better with SQL 2005 than SQL 2000? Any help or guiadance would be appreciated

    Read the article

  • Intel Dual Band Wireless-AC 7260 keeps dropping wifi

    - by Rick T
    My wifi Intel Dual Band Wireless-AC 7260 keeps dropping wificonnection drops and the network to which I was connected disappears from the list of available networks in network manager. The only way to fix it is to disable wifi and re-enable it How can I fix this. I'm using ubuntu 14.04 64bit. It mostly drops connections on the 5ghz network. My other devices don't drop connections over wifi. see logs and versions rt@simon:~$ uname -a Linux simon 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux rt@simon:~$ rt@simon:~$ dmesg | grep iwl [ 3.370777] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.381089] iwlwifi 0000:03:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm [ 3.414637] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 3.414695] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.414913] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S rt@simon:~$ cat /var/log/syslog | grep -e iwl -e 80211 | tail -n25 Aug 14 08:13:02 simon kernel: [ 3.452780] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:13:02 simon kernel: [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Aug 14 08:13:06 simon NetworkManager[1125]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi) Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): using nl80211 for WiFi device control Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Aug 14 08:13:06 simon kernel: [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:13:06 simon kernel: [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:14:18 simon kernel: [ 81.230162] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:14:18 simon kernel: [ 81.232330] cfg80211: World regulatory domain updated: Aug 14 08:14:18 simon kernel: [ 81.232332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:14:18 simon kernel: [ 81.232333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232334] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:02 simon kernel: [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:02 simon kernel: [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:18 simon kernel: [ 621.223905] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:23:18 simon kernel: [ 621.228945] cfg80211: World regulatory domain updated: Aug 14 08:23:18 simon kernel: [ 621.228950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:23:18 simon kernel: [ 621.228954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228956] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228961] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228963] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

    Read the article

  • Sun Fire X4800 M2 Posts World Record x86 SPECjEnterprise2010 Result

    - by Brian
    Oracle's Sun Fire X4800 M2 using the Intel Xeon E7-8870 processor and Sun Fire X4470 M2 using the Intel Xeon E7-4870 processor, produced a world record single application server SPECjEnterprise2010 benchmark result of 27,150.05 SPECjEnterprise2010 EjOPS. The Sun Fire X4800 M2 server ran the application tier and the Sun Fire X4470 M2 server was used for the database tier. The Sun Fire X4800 M2 server demonstrated 63% better performance compared to IBM P780 server result of 16,646.34 SPECjEnterprise2010 EjOPS. The Sun Fire X4800 M2 server demonstrated 4% better performance than the Cisco UCS B440 M2 result, both results used the same number of processors. This result used Oracle WebLogic Server 12c, Java HotSpot(TM) 64-Bit Server 1.7.0_02, and Oracle Database 11g. This result was produced using Oracle Linux. Performance Landscape Complete benchmark results are at the SPEC website, SPECjEnterprise2010 Results. The table below compares against the best results from IBM and Cisco. SPECjEnterprise2010 Performance Chart as of 3/12/2012 Submitter EjOPS* Application Server Database Server Oracle 27,150.05 1x Sun Fire X4800 M2 8x 2.4 GHz Intel Xeon E7-8870 Oracle WebLogic 12c 1x Sun Fire X4470 M2 4x 2.4 GHz Intel Xeon E7-4870 Oracle Database 11g (11.2.0.2) Cisco 26,118.67 2x UCS B440 M2 Blade Server 4x 2.4 GHz Intel Xeon E7-4870 Oracle WebLogic 11g (10.3.5) 1x UCS C460 M2 Blade Server 4x 2.4 GHz Intel Xeon E7-4870 Oracle Database 11g (11.2.0.2) IBM 16,646.34 1x IBM Power 780 8x 3.86 GHz POWER 7 WebSphere Application Server V7 1x IBM Power 750 Express 4x 3.55 GHz POWER 7 IBM DB2 9.7 Workgroup Server Edition FP3a * SPECjEnterprise2010 EjOPS, bigger is better. Configuration Summary Application Server: 1 x Sun Fire X4800 M2 8 x 2.4 GHz Intel Xeon processor E7-8870 256 GB memory 4 x 10 GbE NIC 2 x FC HBA Oracle Linux 5 Update 6 Oracle WebLogic Server 11g Release 1 (10.3.5) Java HotSpot(TM) 64-Bit Server VM on Linux, version 1.7.0_02 (Java SE 7 Update 2) Database Server: 1 x Sun Fire X4470 M2 4 x 2.4 GHz Intel Xeon E7-4870 512 GB memory 4 x 10 GbE NIC 2 x FC HBA 2 x Sun StorageTek 2540 M2 4 x Sun Fire X4270 M2 4 x Sun Storage F5100 Flash Array Oracle Linux 5 Update 6 Oracle Database 11g Enterprise Edition Release 11.2.0.2 Benchmark Description SPECjEnterprise2010 is the third generation of the SPEC organization's J2EE end-to-end industry standard benchmark application. The SPECjEnterprise2010 benchmark has been designed and developed to cover the Java EE 5 specification's significantly expanded and simplified programming model, highlighting the major features used by developers in the industry today. This provides a real world workload driving the Application Server's implementation of the Java EE specification to its maximum potential and allowing maximum stressing of the underlying hardware and software systems. The workload consists of an end to end web based order processing domain, an RMI and Web Services driven manufacturing domain and a supply chain model utilizing document based Web Services. The application is a collection of Java classes, Java Servlets, Java Server Pages, Enterprise Java Beans, Java Persistence Entities (pojo's) and Message Driven Beans. The SPECjEnterprise2010 benchmark heavily exercises all parts of the underlying infrastructure that make up the application environment, including hardware, JVM software, database software, JDBC drivers, and the system network. The primary metric of the SPECjEnterprise2010 benchmark is jEnterprise Operations Per Second ("SPECjEnterprise2010 EjOPS"). This metric is calculated by adding the metrics of the Dealership Management Application in the Dealer Domain and the Manufacturing Application in the Manufacturing Domain. There is no price/performance metric in this benchmark. Key Points and Best Practices Sixteen Oracle WebLogic server instances were started using numactl, binding 2 instances per chip. Eight Oracle database listener processes were started, binding 2 instances per chip using taskset. Additional tuning information is in the report at http://spec.org. See Also Oracle Press Release -- SPECjEnterprise2010 Results Page Sun Fire X4800 M2 Server oracle.com OTN Sun Fire X4270 M2 Server oracle.com OTN Sun Storage 2540-M2 Array oracle.com OTN Oracle Linux oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN WebLogic Suite oracle.com OTN Disclosure Statement SPEC and the benchmark name SPECjEnterprise are registered trademarks of the Standard Performance Evaluation Corporation. Sun Fire X4800 M2, 27,150.05 SPECjEnterprise2010 EjOPS; IBM Power 780, 16,646.34 SPECjEnterprise2010 EjOPS; Cisco UCS B440 M2, 26,118.67 SPECjEnterprise2010 EjOPS. Results from www.spec.org as of 3/27/2012.

    Read the article

  • OSI Model

    - by kaleidoscope
    The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer ·         Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. ·         Establishment and termination of a connection to a communications medium. ·         Participation in the process whereby the communication resources are effectively shared among multiple users. ·         Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer ·         Provides the functional and procedural means to transfer data between network entities. ·         Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). ·         Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. ·         The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. ·         MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. ·         LLC layer controls frame synchronization, flow control and error checking.   Layer 3: Network Layer ·         Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. ·         Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. ·         Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible.   Layer 4: Transport Layer ·         Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. ·         Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. ·         Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer ·         Controls the dialogues (connections) between computers. ·         Establishes, manages and terminates the connections between the local and remote application. ·         Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. ·         Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer ·         Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. ·         Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer ·         This layer interacts with software applications that implement a communicating component. ·         Identifies communication partners, determines resource availability, and synchronizes communication. o       When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o       When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o       In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

    Read the article

  • System.Threading.ThreadAbortException executing WCF service

    - by SURESH GIRIRAJAN
    In one of our prod server we recently ran into issue when we went and update the web.config and try to browse the service. We started seeing the service was not responding and getting the following warning in the application log. Our service is WCF service, BizTalk orchestration exposed as service. We have other prod server where we never ran into this issue, so what’s different with this server. After going thru lot of forum and came up on some Microsoft service pack and hot fix which related to FCN. But I don’t want to apply any patch on this server then we need to do on all the other servers too. So solution is simple, I dropped the existing website, created a new site with different name with updated web.config browse the service. Then dropped that site and recreate the original web site and it worked fine without any issue. Event Viewer:  Event Type:        Warning Event Source:    ASP.NET 2.0.50727.0 Event Category:                Web Event Event ID:              1309 Date:                     6/6/2011 Time:                    5:41:42 PM User:                     N/A Computer:          PRODP02 Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 6/6/2011 5:41:42 PM Event time (UTC): 6/6/2011 9:41:42 PM Event ID: a71769f42b304355a58c482bfec267f2 Event sequence: 3 Event occurrence: 1 Event detail code: 0  Application information:     Application domain: /LM/W3SVC/518296899/ROOT/PortArrivals-2-129518698821558995     Trust level: Full     Application Virtual Path: /TESTSVC     Application Path: D:\inetpub\wwwroot\RFID\TESTSVC\     Machine name: PRODP02  Process information:     Process ID: 8752     Process name: w3wp.exe     Account name: domain\BizTalk_Svc_Hostlso  Exception information:     Exception type: ThreadAbortException     Exception message: Thread was being aborted.  Request information:     Request URL: http://localhost:81/TESTSVC/TESTSVCS.svc     Request path: /TESTSVC/TESTSVCS.svc     User host address: 127.0.0.1     User:      Is authenticated: False     Authentication Type:      Thread account name: domain\BizTalk_Svc_Hostlso  Thread information:     Thread ID: 22     Thread account name: domain\BizTalk_Svc_Hostlso     Is impersonating: False     Stack trace:    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)  at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)    at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)  <Description>Handling an exception.</Description> <AppDomain>/LM/W3SVC/518296899/ROOT/TESTSVC-6-129518741899334691</AppDomain> <Exception> <ExceptionType>System.Threading.ThreadAbortException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>Thread was being aborted.</Message> <StackTrace> at System.Threading.Monitor.Enter(Object obj) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) </StackTrace> <ExceptionString>System.Threading.ThreadAbortException: Thread was being aborted.    at System.Threading.Monitor.Enter(Object obj)    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)    at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)    at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)</ExceptionString>

    Read the article

  • Having fun with Reflection

    - by Nick Harrison
    I was once asked in a technical interview what I could tell them about Reflection.   My response, while a little tongue in cheek was that "I can tell you it is one of my favorite topics to talk about" I did get a laugh out of that and it was a great ice breaker.    Reflection may not be the answer for everything, but it often can be, or maybe even should be.     I have posted in the past about my favorite CopyTo method.   It can come in several forms and is often very useful.   I explain it further and expand on the basic idea here  The basic idea is to allow reflection to loop through the properties of two objects and synchronize the ones that are in common.   I love this approach for data binding and passing data across the layers in an application. Recently I have been working on a project leveraging Data Transfer Objects to pass data through WCF calls.   We won't go into how the architecture got this way, but in essence there is a partial duplicate inheritance hierarchy where there is a related Domain Object for each Data Transfer Object.     The matching objects do not share a common ancestor or common interface but they will have the same properties in common.    By passing the problems with this approach, let's talk about how Reflection and our friendly CopyTo could make the most of this bad situation without having to change too much. One of the problems is keeping the two sets of objects in synch.   For this particular project, the DO has all of the functionality and the DTO is used to simply transfer data back and forth.    Both sets of object have parallel hierarchies with the same properties being defined at the corresponding levels.   So we end with BaseDO,  BaseDTO, GenericDO, GenericDTO, ProcessAreaDO,  ProcessAreaDTO, SpecializedProcessAreaDO, SpecializedProcessAreaDTO, TableDo, TableDto. and so on. Without using Reflection and a CopyTo function, tremendous care and effort must be made to keep the corresponding objects in synch.    New properties can be added at any level in the inheritance and must be kept in synch at all subsequent layers.    For this project we have come up with a clever approach of calling a base GetDo or UpdateDto making sure that the same method at each level of inheritance is called.    Each level is responsible for updating the properties at that level. This is a lot of work and not keeping it in synch can create all manner of problems some of which are very difficult to track down.    The other problem is the type of code that this methods tend to wind up with. You end up with code like this: Transferable dto = new Transferable(); base.GetDto(dto); dto.OfficeCode = GetDtoNullSafe(officeCode); dto.AccessIndicator = GetDtoNullSafe(accessIndicator); dto.CaseStatus = GetDtoNullSafe(caseStatus); dto.CaseStatusReason = GetDtoNullSafe(caseStatusReason); dto.LevelOfService = GetDtoNullSafe(levelOfService); dto.ReferralComments = referralComments; dto.Designation = GetDtoNullSafe(designation); dto.IsGoodCauseClaimed = GetDtoNullSafe(isGoodCauseClaimed); dto.GoodCauseClaimDate = goodCauseClaimDate;       One obvious problem is that this is tedious code.   It is error prone code.    Adding helper functions like GetDtoNullSafe help out immensely, but there is still an easier way. We can bypass the tedious code, by pass the complex inheritance tricks, and reduce all of this to a single method in the base class. TransferObject dto = new TransferObject(); CopyTo (this, dto); return dto; In the case of this one project, such a change eliminated the need for 20% of the total code base and a whole class of unit test cases that made sure that all of the properties were in synch. The impact of such a change also needs to include the on going time savings and the improvements in quality that can arise from them.    Developers who are not worried about keeping the properties in synch across mirrored object hierarchies are freed to worry about more important things like implementing business requirements.

    Read the article

  • Doing your first mock with JustMock

    - by mehfuzh
    In this post, i will start with a  more traditional mocking example that  includes a fund transfer scenario between two different currency account using JustMock.Our target interface that we will be mocking looks similar to: public interface ICurrencyService {     float GetConversionRate(string fromCurrency, string toCurrency); } Moving forward the SUT or class that will be consuming the  service and will be invoked by user [provided that the ICurrencyService will be passed in a DI style] looks like: public class AccountService : IAccountService         {             private readonly ICurrencyService currencyService;               public AccountService(ICurrencyService currencyService)             {                 this.currencyService = currencyService;             }               #region IAccountService Members               public void TransferFunds(Account from, Account to, float amount)             {                 from.Withdraw(amount);                 float conversionRate = currencyService.GetConversionRate(from.Currency, to.Currency);                 float convertedAmount = amount * conversionRate;                 to.Deposit(convertedAmount);             }               #endregion         }   As, we can see there is a TransferFunds action implemented from IAccountService  takes in a source account from where it withdraws some money and a target account to where the transfer takes place using the provided conversion rate. Our first step is to create the mock. The syntax for creating your instance mocks is pretty much same and  is valid for all interfaces, non-sealed/sealed concrete instance classes. You can pass in additional stuffs like whether its an strict mock or not, by default all the mocks in JustMock are loose, you can use it as default valued objects or stubs as well. ICurrencyService currencyService = Mock.Create<ICurrencyService>(); Using JustMock, setting up your expectations and asserting them always goes with Mock.Arrang|Assert and this is pretty much same syntax no matter what type of mocking you are doing. Therefore,  in the above scenario we want to make sure that the conversion rate always returns 2.20F when converting from GBP to CAD. To do so we need to arrange in the following way: Mock.Arrange(() => currencyService.GetConversionRate("GBP", "CAD")).Returns(2.20f).MustBeCalled(); Here, I have additionally marked the mock call as must. That means it should be invoked anywhere in the code before we do Mock.Assert, we can also assert mocks directly though lamda expressions  but the more general Mock.Assert(mocked) will assert only the setups that are marked as "MustBeCalled()”. Now, coming back to the main topic , as we setup the mock, now its time to act on it. Therefore, first we create our account service class and create our from and to accounts respectively. var accountService = new AccountService(currencyService);   var canadianAccount = new Account(0, "CAD"); var britishAccount = new Account(0, "GBP"); Next, we add some money to the GBP  account: britishAccount.Deposit(100); Finally, we do our transfer by the following: accountService.TransferFunds(britishAccount, canadianAccount, 100); Once, everything is completed, we need to make sure that things were as it is we have expected, so its time for assertions.Here, we first do the general assertions: Assert.Equal(0, britishAccount.Balance); Assert.Equal(220, canadianAccount.Balance); Following, we do our mock assertion,  as have marked the call as “MustBeCalled” it will make sure that our mock is actually invoked. Moreover, we can add filters like how many times our expected mock call has occurred that will be covered in coming posts. Mock.Assert(currencyService); So far, that actually concludes our  first  mock with JustMock and do stay tuned for more. Enjoy!!

    Read the article

  • Functional/nonfunctional requirements VS design ideas

    - by Nicholas Chow
    Problem domain Functional requirements defines what a system does. Non-Functional requirements defines quality attributes of what the system does as a whole.(performance, security, reliability, volume, useability, etc.) Constraints limits the design space, they restrict designers to certain types of solutions. Solution domain Design ideas , defines how the system does it. For example a stakeholder need might be we want to increase our sales, therefore we must improve the usability of our webshop so more customers will purchase, a requirement can be written for this. (problem domain) Design takes this further into the solution domain by saying "therefore we want to offer credit card payments in addition to the current prepayment option". My problem is that the transition phase from requirement to design seems really vague, therefore when writing requirements I am often confused whether or not I incorporated design ideas in my requirements, that would make my requirement wrong. Another problem is that I often write functional requirements as what a system does, and then I also specify in what timeframe it must be done. But is this correct? Is it then a still a functional requirement or a non functional one? Is it better to seperate it into two distinct requirements? Here are a few requirements I wrote: FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. FR2 Organizer submits a Project FR2 describes the submission of a Project by an Organizer on CrowdFundum - FR2 The system shall display a submit Project form to the Organizer accounts on the website.< - FR2.3 The system shall check for completeness the Name of the Project, 1-3 Photo’s, Keywords of the Project, Punch line, Minimum and maximum amount of people, Funding threshold, One or more reward tiers, Schedule of when what will be organized, Budget plan, 300-800 Words of additional information about the Project, Contact details within 1 secondin after an Organizer submits the submit Project form. - FR2.8 The system shall add to the homepage in the new Projects category the Project link within 30 seconds after the system made a Project webpage - FR2.9 The system shall include in the Project link for the homepage : Name of the Project, 1 Photo, Punch line within 30 seconds after the system made a Project webpage. Questions: FR 1.1 : Have I incorporated a design idea here, would " the system shall have a registration form" be a better functional requirement? F1.2 ,2.3 : Is this not singular? Would the conditions be better written for each its own separate requirement FR 1.4: Is this a design idea? Is this a correct functional requirement or have I incorporated non functional(performance) in it? Would it be better if I written it like this: FR1 The system shall display an error message when check is unsuccessful. NFR: The system will respond to unsuccesful registration form checks within 1 seconds. Same question with FR 2.8 and 2.9. FR2.3: The system shall check for "completeness", is completeness here used ambigiously? Should I rephrase it? FR1.2: I added that the system shall require a "Captcha code" is this a functional requirement or does it belong to the "security aspect" of a non functional requirement. I am eagerly waiting for your response. Thanks!

    Read the article

  • Web Application Integration Steps in OAM 11gR2 (High Level)

    - by Venkata Srikanth
    Install OAM, Webtier (OHS) and WebGate as per the standard installation steps. Create a WebGate instance (i.e deploy WebGate) A WebGate instance must be created that will copy required bits of agent from WEBGATE_HOME to WebGate instance location that shares the same INSTANCE_HOME with OHS ./deployWebGateInstance.sh –w /Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 Note: Here –w flag indicates OHS instance folder and –oh indicates the WebGate Oracle home Configure WebGate In the webgate configuration the EditHttpdConf utility will copy OUI instantiated apache_webgate.template from WEBGATE_HOME to webgate instance location (renamed to webgate.conf), and update httpd.conf with one additional line to include webgate.conf. export LD_LIBRARY_PATH=$ LD_LIBRARY_PATH:/Oracle/Middleware/Oracle_WT1/lib Navigate to /Oracle/Middleware/Oracle_OAMWebGate1/webgate/ohs/tools/setup/InstallTools ./EditHttpdConf –w /Oracle/Middleware/Oracle_WT1/instances/instace1/config/OHS/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 –o webgate.conf Register WebGate Use RREG tool to register the OAM 11G WebGate Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/input Edit OAM11Grequest.xml. Change the specific xml content to include the weblogic admin URL, agentBaseURL, host identifier etc.. Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/bin Set permissions to oamreg.sh à chmod 777 oamreg.sh Edit oamreg.sh and set OAM_REG_HOME=/Oracle/Middleware/Oracle_IDM1/oam/server/rreg ./oamreg.sh inband input/OAM11Grequest.xml Enter the WebLogic admin credentials when prompted. After performing the above steps, there will be two artifcats created under Oracle/Middleware/Oracle_IDM1/oam/server/rreg/output, namely ObAccessClient.xml (Stroing webgate config parameters) and cwallet.sso (storing the agent key). These files must be copied to WebGate instance config folder (/Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1/webgate/config) Restart OHS Deploy the web application (myApp) in WebLogic application server Proxy Configuration in OHS The mod_wl_ohs module enables requests to be proxied from Oracle HTTP Server 11g to Oracle WebLogic Server. Navigate to /Oracle/Middleware/Oracle_WT1/instances/instance1/config/OHS/ohs1 Edit mod_wl_ohs.conf file to include the following: <IfModule weblogic_module> WebLogicHost <WEBLOGIC_HOST> WebLogicPort <WEBLOGIC_PORT> # Debug ON # WLLogFile /tmp/weblogic.log MatchExpression *.jsp </IfModule> <Location /myApp> SetHandler weblogic-handler # PathTrim /weblogic # ErrorPage http:/WEBLOGIC_HOME:WEBLOGIC_PORT/ </Location> Note: Here WEBLOGIC_HOST and WEBLOGIC_PORT are the WebLogic admin server host and port respectively Restart OHS. Now if we access the web application URL with OHS host and port (Ex: http://OHS_HOST:<OHS_PORT>/myApp) so that the requests will be proxied to WebLogic server. Create a new application domain Login to OAM Admin Console Navigate to Shared Componentsà Authentication Schemesà Create Authentication Scheme (Ex: LDAP Auth Scheme. Here the scheme is assoicated with LDAP Authentication Module) Navigate to Policy Configuration à Application Domain à Create Application Domain Enter the Application Domain Name and Click Apply. Navigate to Resources tab and add the resource urls (Web Application URLs that needs to be protected) Navigate to Authentication Policy tab à Create a new authentication ploicy by providing the Resource URLs (The sample Web Application URLs) and Authentication Scheme. Navigate to Authorization Policy tab à Create a new authorization policy à Enter authorization policy name and navigate to Resource Tab à Attach the Reource URL, Host Identifiers here. Navigate to Conditions tab à Add the conditions like whom to allow and whom to deny access. Navigate to Rules tab à Crate the Allow Rule and Deny Rule with the available conditions from the previous step so that the Authorization Policy may authorize the logins. Navigate to Resources tab and attach the Authentication and Authorization plocies created in the above steps. Test the Web Application Integration.

    Read the article

  • Using Teleriks new LINQ implementation to connect to MySQL

    Last week Telerik released a new LINQ implementation that is simple to use and produces domain models very fast. Built on top of the enterprise grade OpenAccess ORM, you can connect to any database that OpenAccess can connect to such as: SQL Server, MySQL, Oracle, SQL Azure, VistaDB, etc. Today I will show you how to build a domain model using MySQL as your back end. To get started, you have to download MySQL 5.x and the MySQL Workbench and also, as my colleague Alexander Filipov at Telerik reminded me, make sure you install the MySQL .NET Connector, which is available here.  I like to use Northwind, ok it gives me the warm and fuzzies, so I ran a script to produce Northwind on my MySQL server. There are many ways you can get Northwind on your MySQL database, here is a helpful blog to get your started. I also manipulated the first record to indicate that I am in MySQL and gave a look via the MySQL Workbench. Ok, time to build our model! Start up the Domain Model wizard by right clicking on the project in Visual Studio (I have a Web project) and select Add|New Item and choose Telerik OpenAccess Domain Model from the new item list. When the wizard comes up, choose MySQL as your back end and enter in the name of your saved MySQL connection. If you dont have a saved MySQL connection set up in Visual Studio, click on New Connection and enter in the proper connection information. *Note, this is where you need to have the MySQL .NET connector installed. After you set your connection to the MySQL database server, you have to choose which tables to include in your model. Just for fun, I will choose all of them. Give your model a name, like NorthwindEntities and click finish. That is it. Now lets consume the model with ASP .net. I created a simple page that also has a GridView on it. On my page load I wrote this code, by now it should look very familiar, a simple LINQ query filtering customers by country (Germany) and binding the results to the grid.  1: protected void Page_Load(object sender, EventArgs e) 2: { 3: if (!IsPostBack) 4: { 5: //a reference to the data context 6: NorthwindEntities dat = new NorthwindEntities(); 7: //LINQ Statement 8: var result = from c in dat.Customers 9: where c.Country == "Germany" 10: select c; 11: //Databinding to the Gridview 12: GridView1.DataSource = result; 13: GridView1.DataBind(); 14: } 15: } .csharpcode, .csharpcode pre{ font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/}.csharpcode pre { margin: 0em; }.csharpcode .rem { color: #008000; }.csharpcode .kwrd { color: #0000ff; }.csharpcode .str { color: #006080; }.csharpcode .op { color: #0000c0; }.csharpcode .preproc { color: #cc6633; }.csharpcode .asp { background-color: #ffff00; }.csharpcode .html { color: #800000; }.csharpcode .attr { color: #ff0000; }.csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em;}.csharpcode .lnum { color: #606060; } F5 produces the following. Tomorrow Ill show how to take the same model and create an Astoria/OData data feed. Technorati Tags: MySQL Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Enterprise Manager in EPM 11.1.2.x...a game of hide and seek!

    - by THE
    Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} guest article: Maurice Bauhahn: Users of Oracle Hyperion Enterprise Performance Management 11.1.2.0 and 11.1.2.1 may puzzle why the URL http://<servername>:7001/em may not conjure up Enterprise Manager Fusion Middleware Control. This powerful tool has been installed by default...but WebLogic may not have been 'Extended' to allow you to call it up (we are hopeful this ‘Extend’  step will not be needed with 11.1.2.2). The explanation is on pages 425 and following of the following document: http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-1-72-427329.pdf A close look at the screen dumps in that section reveals a somewhat scary prospect, however: the non-AdminServer servlets had all failed (see the red down-arrow icons to the right of their names) after the configuration! Of course you would want to avoid that scenario! A rephrasing of the instructions might help: Ensure the WebLogic AdminServer is not running (in a default scenario that would mean port 7001 is not active). Ensure you have logged into the computer as the installing owner of EPM. Since Enterprise Manager uses a LOT of resources, be sure that there is adequate free RAM to accommodate the added load. On the machine where WebLogic AdminServer is set up (typically the Foundation Services machine), run \Oracle\Middleware\wlserver_10.3\common\bin\config (config.sh on Unix). Select the 'Extend an existing WebLogic domain' option, and click the 'Next' button. Select the domain being used by EPM System. - Typically, the default domain is created under /Oracle/Middleware/user_projects/domains and is named EPMSystem. - Click 'Next'. Under 'Extend my domain automatically to support the following added products' - place a check mark before 'Oracle Enterprise Manager - 11.1.1.0 [oracle_common]' to select it. - Continue accepting the defaults by clicking 'Next' on each page until - on the last page you click 'Extend'. - The system will grind for a few minutes while it configures (deploys?) EM. - Start the AdminServer. Sometimes there is contention in the startup order of the various servlets (resulting in some not coming up). To avoid that problem on Microsoft Windows machines you may start and stop services via the following analogous command line commands to those run on Linux/Unix (these more carefully space out timings of these events): Ensure EPM is up:\Oracle\Middleware\user_projects\epmsystem1\bin\start.bat Ensure WebLogic is up:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\startWebLogic.cmd Shut down WebLogic:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\stopWebLogic.cmd Shut down EPM:\Oracle\Middleware\user_projects\epmsystem1\bin\stop.bat  Now you should be able to more successfully troubleshoot with the EM tool:

    Read the article

  • Organization &amp; Architecture UNISA Studies &ndash; Chap 6

    - by MarkPearl
    Learning Outcomes Discuss the physical characteristics of magnetic disks Describe how data is organized and accessed on a magnetic disk Discuss the parameters that play a role in the performance of magnetic disks Describe different optical memory devices Magnetic Disk The way data is stored on and retried from magnetic disks Data is recorded on and later retrieved form the disk via a conducting coil named the head (in many systems there are two heads) The writ mechanism exploits the fact that electricity flowing through a coil produces a magnetic field. Electric pulses are sent to the write head, and the resulting magnetic patterns are recorded on the surface below with different patterns for positive and negative currents The physical characteristics of a magnetic disk   Summarize from book   The factors that play a role in the performance of a disk Seek time – the time it takes to position the head at the track Rotational delay / latency – the time it takes for the beginning of the sector to reach the head Access time – the sum of the seek time and rotational delay Transfer time – the time it takes to transfer data RAID The rate of improvement in secondary storage performance has been considerably less than the rate for processors and main memory. Thus secondary storage has become a bit of a bottleneck. RAID works on the concept that if one disk can be pushed so far, additional gains in performance are to be had by using multiple parallel components. Points to note about RAID… RAID is a set of physical disk drives viewed by the operating system as a single logical drive Data is distributed across the physical drives of an array in a scheme known as striping Redundant disk capacity is used to store parity information, which guarantees data recoverability in case of a disk failure (not supported by RAID 0 or RAID 1) Interesting to note that the increase in the number of drives, increases the probability of failure. To compensate for this decreased reliability RAID makes use of stored parity information that enables the recovery of data lost due to a disk failure.   The RAID scheme consists of 7 levels…   Category Level Description Disks Required Data Availability Large I/O Data Transfer Capacity Small I/O Request Rate Striping 0 Non Redundant N Lower than single disk Very high Very high for both read and write Mirroring 1 Mirrored 2N Higher than RAID 2 – 5 but lower than RAID 6 Higher than single disk Up to twice that of a signle disk for read Parallel Access 2 Redundant via Hamming Code N + m Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Parallel Access 3 Bit interleaved parity N + 1 Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Independent Access 4 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, significantly lower than single disk for write Similar to RAID 0 for read, significantly lower than single disk for write Independent Access 5 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, lower than single disk for write Similar to RAID 0 for read, generally  lower than single disk for write Independent Access 6 Block interleaved parity N + 2 Highest of all listed alternatives Similar to RAID 0 for read; lower than RAID 5 for write Similar to RAID 0 for read, significantly lower than RAID 5  for write   Read page 215 – 221 for detailed explanation on RAID levels Optical Memory There are a variety of optical-disk systems available. Read through the table on page 222 – 223 Some of the devices include… CD CD-ROM CD-R CD-RW DVD DVD-R DVD-RW Blue-Ray DVD Magnetic Tape Most modern systems use serial recording – data is lade out as a sequence of bits along each track. The typical recording used in serial is referred to as serpentine recording. In this technique when data is being recorded, the first set of bits is recorded along the whole length of the tape. When the end of the tape is reached the heads are repostioned to record a new track, and the tape is again recorded on its whole length, this time in the opposite direction. That process continued back and forth until the tape is full. To increase speed, the read-write head is capable of reading and writing a number of adjacent tracks simultaneously. Data is still recorded serially along individual tracks, but blocks in sequence are stored on adjacent tracks as suggested. A tape drive is a sequential access device. Magnetic tape was the first kind of secondary memory. It is still widely used as the lowest-cost, slowest speed member of the memory hierarchy.

    Read the article

  • Cannot Mount USB 3.0 Hard Disk ?!!

    - by Tenken
    Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

    Read the article

  • Q&A: Drive Online Engagement with Intuitive Portals and Websites

    - by kellsey.ruppel
    We had a great webcast yesterday and wanted to recap the questions that were asked throughout. Can ECM distribute contents to 3rd party sites?ECM, which is now called WebCenter Content can distribute content to 3rd party sites via several means as well as SSXA - Site Studio for External Applications. Will you be able to provide more information on these means and SSXA?If you have an existing JSP application, you can add the SSXA libraries to your IDE where your application was built (JDeveloper for example).  You can now drop some code into your 3rd party site/application that can both create and pull dynamically contributable content out of the Content Server for inclusion in your pages.   If the 3rd party site is not a JSP application, there is also the option of leveraging two Site Studio (not SSXA) specific custom WebCenter Content services to pull Site Studio XML content into a page. More information on SSXA can be found here: http://docs.oracle.com/cd/E17904_01/doc.1111/e13650/toc.htm Is there another way than a ”gadget” to integrate applications (like loan simulator) in WebCenter Sites?There are some other ways such as leveraging the Pagelet Producer, which is a core component of WebCenter Portal. Oracle WebCenter Portal's Pagelet Producer (previously known as Oracle WebCenter Ensemble) provides a collection of useful tools and features that facilitate dynamic pagelet development. A pagelet is a reusable user interface component. Any HTML fragment can be a pagelet, but pagelet developers can also write pagelets that are parameterized and configurable, to dynamically interact with other pagelets, and respond to user input. Pagelets are similar to portlets, but while portlets were designed specifically for portals, pagelets can be run on any web page, including within a portal or other web application. Pagelets can be used to expose platform-specific portlets in other web environments. More on Page Producer can be found here:http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_pagelet.htm#CHDIAEHG Can you describe the mechanism available to achieve the context transfer of content?The primary goal of context transfer is to provide a uniform experience to customers as they transition from one channel to another, for instance in the use-case discussed in the webcast, it was around a customer moving from the .com marketing website to the self-service site where the customer wants to manage his account information. However if WebCenter Sites was able to identify and segment the customers  to a specific category where the customer is a potential target for some promotions, the same promotions should be targeted to the customer when he is in the self-service site, which is managed by WebCenter Portal. The context transfer can be achieved by calling out the WebCenter Sites Engage Server API’s, which will identify the segment that the customer has been bucketed into. Again through REST API’s., WebCenter Portal can then request WebCenter Sites for specific content that needs to be targeted for a customer for the identified segment. While this integration can be achieved through custom integration today, Oracle is looking into productizing this integration in future releases.  How can context be transferred from WebCenter Sites (marketing site) to WebCenter Portal (Online services)?WebCenter Portal Personalization server can call into WebCenter Sites Engage Server to identify the segment for the user and then through REST API’s request specific content that needs to be surfaced in the Portal. Still have questions? Leave them in the comments section! And you can catch a replay of the webcast here.

    Read the article

  • Q&A: Drive Online Engagement with Intuitive Portals and Websites

    - by kellsey.ruppel
    We had a great webcast yesterday and wanted to recap the questions that were asked throughout. Can ECM distribute contents to 3rd party sites?ECM, which is now called WebCenter Content can distribute content to 3rd party sites via several means as well as SSXA - Site Studio for External Applications. Will you be able to provide more information on these means and SSXA?If you have an existing JSP application, you can add the SSXA libraries to your IDE where your application was built (JDeveloper for example).  You can now drop some code into your 3rd party site/application that can both create and pull dynamically contributable content out of the Content Server for inclusion in your pages.   If the 3rd party site is not a JSP application, there is also the option of leveraging two Site Studio (not SSXA) specific custom WebCenter Content services to pull Site Studio XML content into a page. More information on SSXA can be found here: http://docs.oracle.com/cd/E17904_01/doc.1111/e13650/toc.htm Is there another way than a ”gadget” to integrate applications (like loan simulator) in WebCenter Sites?There are some other ways such as leveraging the Pagelet Producer, which is a core component of WebCenter Portal. Oracle WebCenter Portal's Pagelet Producer (previously known as Oracle WebCenter Ensemble) provides a collection of useful tools and features that facilitate dynamic pagelet development. A pagelet is a reusable user interface component. Any HTML fragment can be a pagelet, but pagelet developers can also write pagelets that are parameterized and configurable, to dynamically interact with other pagelets, and respond to user input. Pagelets are similar to portlets, but while portlets were designed specifically for portals, pagelets can be run on any web page, including within a portal or other web application. Pagelets can be used to expose platform-specific portlets in other web environments. More on Page Producer can be found here: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_pagelet.htm#CHDIAEHG Can you describe the mechanism available to achieve the context transfer of content?The primary goal of context transfer is to provide a uniform experience to customers as they transition from one channel to another, for instance in the use-case discussed in the webcast, it was around a customer moving from the .com marketing website to the self-service site where the customer wants to manage his account information. However if WebCenter Sites was able to identify and segment the customers  to a specific category where the customer is a potential target for some promotions, the same promotions should be targeted to the customer when he is in the self-service site, which is managed by WebCenter Portal. The context transfer can be achieved by calling out the WebCenter Sites Engage Server API’s, which will identify the segment that the customer has been bucketed into. Again through REST API’s., WebCenter Portal can then request WebCenter Sites for specific content that needs to be targeted for a customer for the identified segment. While this integration can be achieved through custom integration today, Oracle is looking into productizing this integration in future releases.  How can context be transferred from WebCenter Sites (marketing site) to WebCenter Portal (Online services)?WebCenter Portal Personalization server can call into WebCenter Sites Engage Server to identify the segment for the user and then through REST API’s request specific content that needs to be surfaced in the Portal. Still have questions? Leave them in the comments section! And you can catch a replay of the webcast here.

    Read the article

  • Git apache : unable to push via http

    - by GlinesMome
    I have to setup a server which can allow http vcs management (such as git and svn). svn support works well, but I have some trouble with git. Actual configuration: CentOS 5 Apache 2.2.8 Git 1.7.4.1 The /etc/httpd/conf/httpd.conf content: ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 10 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule mysql_auth_module modules/mod_auth_mysql.so LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2 PassengerRuby /usr/bin/ruby Include conf.d/*.conf User apache Group apache ServerAdmin aedi.admin@domain ServerName s1.domain UseCanonicalName Off DocumentRoot "/data/www/" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/data/www/"> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </IfModule> </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /data/www/s1/html ServerName s1.asso.domain ErrorLog logs/s1.error.log </VirtualHost> <VirtualHost *:80> DocumentRoot /data/www/s2/old ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> <VirtualHost *:443> DocumentRoot /data/www/s2/html ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> The /etc/httpd/conf.d/git.conf content: Alias /git /data/www/s2/git <Directory /data/www/s2/git> Options +Indexes DAV on SSLRequireSSL </Directory> Fine, every repository are created by the same way: git --bare init "$1.git" && cd "$1.git" && git update-server-info && chmod -R 770 . && cd .. && git clone `pwd`/"$1.git" && cd "$1" && echo 42 > answer && git add . && git commit -m "Initial commit" && git push origin master && git rm answer && git commit -a -m "Clean repository" && git push && cd .. && rm -Rf "$1" Then, on the client side, I try: ~ $ git clone https://s2.domain/git/repo.git Cloning into 'repo'... warning: You appear to have cloned an empty repository. ~ $ cd repo repo $ echo 42 > answer && git add . && git commit -m "init" && git push origin master [master (root-commit) a2aadb1] init 1 file changed, 1 insertion(+) create mode 100644 answer Fetching remote heads... refs/ refs/heads/ refs/tags/ updating 'refs/heads/master' from 0000000000000000000000000000000000000000 to a2aadb1772e12104ce358f7ff9a11db5d93ead7d sending 3 objects MOVE d81cc0710eb6cf9efd5b920a8453e1e07157b6cd failed, aborting (22/502) MOVE 2c186ad49fa24695512df5e41cb5e6f2d33c119b failed, aborting (22/502) MOVE a2aadb1772e12104ce358f7ff9a11db5d93ead7d failed, aborting (22/502) Updating remote server info fatal: git-http-push failed The apache associated logs: my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/info/refs?service=git-upload-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:48 +0200] "GET /git/repo.git/info/refs?service=git-receive-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/ HTTP/1.1" 207 569 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/info/refs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/objects/info/packs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/info/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/info/refs HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/objects/info/packs HTTP/1.1" 200 1 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/heads/ HTTP/1.1" 405 342 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/refs/heads/master HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/a2/ HTTP/1.1" 404 317 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/2c/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/d8/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/objects/a2/ HTTP/1.1" 201 296 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/refs/heads/master HTTP/1.1" 204 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/info/refs HTTP/1.1" 204 - "-" "git/1.7.11.4" I have tried many configurations (even smart http from progit), but a major part of them consider the fact that they have a dedicated domain, but I'm in a sub-directory, so I can't apply these examples. Have you got an idea of the problem? have you got solutions? have you got configuration example with non-root directory? For your help, In advance, Thanks.

    Read the article

  • webserver horrible slow, sometimes incredible fast

    - by dhanke
    i am running a small community ( 6000+ Members ) on a non-virtual 64-bit ubuntu 11.04 system. I am not a Linux-pro, not even advanced, i just tried to setup a webserver, which does nothing special actually. Delivering some dynamic PHP and RoR websites is its task. So it might be that my configuration files do look horrible bad. Also, i might use the wrong vocabulary, so in doubt, please ask. Having a current all-time record of 520 registered users (board-accounts, no system-users) online at same time, average server-load is about 2.0 - 5.0. Meantime (~250 users) average server load value is at about 0.4 - 0.8, sometimes, on some expensive searches a bit higher. everything fine. From time to time however, the load increases up to 120 (120.0, not 12.0 ;) ). In this time, its hard to even connect via SSH, but when i reach the server, and use top/htop/iotop to see whats happening, i cannot identify any process causing high CPU load. iotop tells me about a current reading/writing speed of about approx. 70kb/s, which is quite equal to power-off i think. Memory-Usage is max. at ~ 12GB of 16GB, so swap remains empty. now the odd (at least for me:) waiting some minutes ( since i always get a bit into a panic when this happens, it feels like 5 minutes, but i suppose its more like 20-30 minutes) and the server is back to normal. everything continues as normal. another odd fact: when i run hdparm -tT /dev/sda, i get answer like: /dev/sda: Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec when i run the same command while the server is "frozen", the answer is like /dev/sda: <- takes about 5 minutes until this line appears Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec <- 5 more minutes Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec <- another 5 minutes so the values are the same, but the quoted time is completely wrong. using time command as prefix also tells me that ~ 15 minutes were used. I searched in dmesg, /var/log/[messages|syslog] - nothing found. /var/log/errors however tells me that: Jul 4 20:28:30 localhost kernel: [19080.671415] INFO: task php5-fpm:27728 blocked for more than 120 seconds. Jul 4 20:28:30 localhost kernel: [19080.671419] "echo 0 /proc/sys/kernel/hung_task_timeout_secs" disables this message. multiple times. now that message does tell me that php5-fpm task was blocked or did block ? - but not if that is the cause or just one of the results of that "freeze". Anyone? to cut the long story short, i dont know where even to start analyzing. So if you can give me any advice by looking at following specs and configs, or ask me to provide more information, i`d be glad. Specs: 6 Core AMD Phenom(tm) II X6 1055T Processor * 16 Gigabyte Ram 2x 1.5 TB Seagate ST1500DL003-9VT16L via SATA 3 via SoftwareRaid (i suppose) Services: (due to service --status-all, those with [ + ]) nginx Webserver 1.0.14 mySQL 5.1.63 Server Ruby on Rails 2.3.11 ( passenger-nginx-module ) php5-fpm 5.3.6-13ubuntu3.7 SSH ido2db Further services: default crontab + nightly backup. syslog-ng Website consists of 2 subdomains, forum. and www. where forum is a phpBB3.x PHP-Board, and www a Ruby on Rails 2.3.11 application (portal). Mini-Note: sometimes i notice that the forum is pretty slow, in contrast to the always-fast (except for this "freeze") portal. Both share the same Database, but the portal is using it read-only. The Webserver is nginx, using phusion passenger module to communicate with the ruby-application. Also, for the forum it communicates with php5-fpm via socket: relevant nginx configuration parts ( with comments/questions starting by ; ) ; in case of freeze due to too high Filesystem activity, maybe adding a limit? #worker_rlimit_nofile 50000; user www-data; ; 6 cores, so i read 6 fits. maybe already wrong? worker_processes 6; pid /var/run/nginx.pid; events { worker_connections 1024; } http { passenger_root /var/lib/gems/1.8/gems/passenger-3.0.11; passenger_ruby /usr/bin/ruby1.8; ; the forum once featured a chat, which was working w/o websockets. ; so it was a hell of pull requests (deactivated now, freeze still happening) keepalive_timeout 65; keepalive_requests 50; gzip on; server { listen 80; server_name www.domain.tld; root /var/www/domain/rails/public; passenger_enabled on; } server { listen 80; server_name forum.domain.tld; location / { root /var/www/domain/forum; index index.php; } ; satic stuff to be handled by nginx location ~* ^/style/.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /var/www/domain/forum/; } ; now the php magic, note the "backend"-fcgi_pass location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/domain/forum$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; } location ~ /\.ht { deny all; } } ;the php5-fpm socket. i read that /dev/shm/ whould be the fastes place for this. bad idea in general? upstream backend { server unix:/dev/shm/phpfpm; } ... } php5-fpm settings (i changed this values due to php5-fpm error log messages higher and higher.. (freeze-problem was there before as well)* listen = /dev/shm/phpfpm user = www-data group = www-data pm = dynamic ; holy, 4000! well, shinking this value to earth-level gave me ; 100s of 502 bad gateway commands. this values were quite stable. ; since there are only max 520 users online i dont get it, why i would need ; as many children as configured here. due to keep-alive maybe? ; asking questions is easier for me since restarting server will make ; my community-members angry ;) pm.max_children = 4000 pm.start_servers = 100 pm.min_spare_servers = 50 pm.max_spare_servers = 150 pm.max_requests = 10 pm.status_path = /status ping.path = /ping ping.response = pong slowlog = log/$pool.log.slow ;should i use rlimit? ;rlimit_files = 1024 chdir = / mysql/my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP ; high number, but less gives some phpBB errors. max_connections = 450 table_cache = 512 ; i read twice the cpu cores, bad? thread_concurrency = 12 join_buffer_size = 2084K concurrent_insert = 3 query_cache_limit = 64M query_cache_size = 512M query_cache_type = 1 log_error = /var/log/mysql/error.log log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 expire_logs_days = 10 max_binlog_size = 100M low_priority_updates=1 [mysqldump] quick quote-names max_allowed_packet = 16M [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/ I used smartctl already, hdds seem to be fine. /proc/mdstatus quotes: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sda3[1] 1459264192 blocks [2/1] [_U] md1 : active raid1 sda1[0] 3911680 blocks [2/1] [U_] unused devices: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127727 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 127727 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited I quote some questions in my configuration files, these are not (intentional) directly problem-related, but would be nice for me to know wether they are indeed questionable or done right. One additional Fact: my MYSQL-database is at 12GB size. i dont know if that does matter, but mytop sometimes shows me 4-5 seconds long insert queries, some are 20-30 seconds long. Its just a feeling that i am unable to prove (because i dont know how), but when i disable the database, the freeze seems not to happen. Example: i created a dummy rails application to see the development log. the app made some sql-queries, reads and inserts. the log quite often was like: DbTest Load (0.3ms) SELECT * FROM `db_test` WHERE (`db_test`.`id` = 31722) LIMIT 1 SQL (0.1ms) BEGIN DbTest Update (0.3ms) UPDATE `db_test` SET `updated_at` = '2012-07-04 23:32:34' WHERE `id` = 31722 - now the log stands still for 5-60 seconds. SQL (49.1ms) COMMIT - SQL-Update time in the log does not include freeze time Rendering test/index Completed in 96ms (View: 16, DB: 59) | 200 OK [http://localhost:9000/test] Bad part is: this mini-freeze here only happens from time to time as well. note: meanwhile i cannot even upload files via scp. I currently feel like running form bad to worse and back by googling for my server-problem due to immense lack of knowledge regarding server configurations. It still makes me wonder, why those problems even appear, since 250 users a time is not such a high amount, right? So my questions: whats wrong and how to fix? ;) or: what information can i provide to make the situation more clear? can you point at some critical bad configuration-line which i should consider to catch up in the documentation? are there any tools i can run to see some possible bottlenecks? any further advice? (next to: "pay someone who knows what he does" - its a private project, server costs enough already. :)) Thanks for your time and help. Best Regards, Daniel P.S.: i renamed the configfiles to domain.tld since i dont want to have any % more load to the server until its fixed. might be a exaggeratedly thought.. P.P.S: if i asked a complete duplicate question, sorry. my search results seemed to be quite specific in their own way.

    Read the article

  • Can't step into stored procedure on remote SQL Server 2008

    - by abatishchev
    I have a domain installed on virtual Windows Server 2008 x64. SQL Server 2008 Express x64 is running in Windows Server 2008 x64 and client on Windows 7 RTM x86. Both are into the domain. I'm starting both Visual Studio 2008 and SQL Server Management Studio 2008 under domain admin user. This account is a member of group sysadmin on SQL Server. Server has firewall exceptions for both TCP and UDP on ports 135-139 and 1433-1434. Visual Studio 2008 Remote debugger services is started on server and Domain Admins group is allowed to debug, When I'm starting debugging of a query in SMS I'm getting this error: Failed to start debugger Error HRESULT E_FAIL has been returned from a call to a COM component. (mscorlib) Program Location: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.SqlServer.Management.UI.VSIntegration.DebugSession.DebugCallbacks.OnSqlInitializeDebuggingEvent(ISqlInitializeDebuggingEvent sqlInitializeDebuggingEvent) at Microsoft.SqlServer.Management.UI.VSIntegration.DebugSession.DebugCallbacks.Microsoft.VisualStudio.Debugger.Interop.IDebugEventCallback2.Event(IDebugEngine2 debugEngine, IDebugProcess2 debugProcess, IDebugProgram2 debugProgram, IDebugThread2 debugThread, IDebugEvent2 debugEvent, Guid& riidEvent, UInt32 attribute) and Unable to access the SQL Server debugging interface. The Visual Studio debugger cannot connect to the remote computer. A firewall may be preventing communication via DCOM to the remote computer. Please see Help for assistance. and Unable to start program MSSSQL://server.mydomain.local/master/sys/=0 And when stepping-in into a stored procedure using VS I'm getting the first one and this: Exception from HRESULT: 0x89710016 What have I do?

    Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >