Search Results

Search found 6660 results on 267 pages for 'usb recognition'.

Page 228/267 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

  • How do I debug an overheating problem?

    - by Tab
    Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

    Read the article

  • recent unreliable wireless connection on 10.04 and 10.10

    - by gabkdlly
    Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

    Read the article

  • recent unreliable wireless connection with Netgear KWGR614 router

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

    Read the article

  • Oracle ZS3 Contest for Partners: Share an unforgettable experience at the Teatro Alla Scala in Milan

    - by Claudia Caramelli-Oracle
    12.00 Dear valued Partner, We are pleased to launch a partner contest exclusive to our partners dedicated to promoting and selling Oracle Systems! You are essential to the success of Oracle and we want to recognize your contribution and effort in driving Oracle Storage to the market. To show our appreciation we are delighted to announce a contest, giving the winners the opportunity to attend a roundtable chaired by Senior Oracle Executives and spend an unforgettable evening at the magnificent Teatro Alla Scala in Milan, followed by a stay at the Grand Hotel et de Milan, courtesy of Oracle. Recognition will be given to 12 partner companies (10 VARs & 2 VADs) who will be recognized for their ZFS storage booking achievement in the broad market between June 1st and July 18th 2014. Criteria of Eligibility A minimum deal value of $30k is required for qualification Partners who are wholly or partially owned by a public sector organization are not eligible for participation  Winners The winning VARs will be: The highest ZS3 or ZBA bookings achievers by COB on July 18th, 2014 in each Oracle EMEA region (1) The highest Oracle on Oracle (2) ZS3 or ZBA bookings achievers by COB on July 18th, 2014 in each Oracle EMEA region The winning VADs (3) will be: The highest ZS3 or ZBA bookings achiever by COB on July 18th 2014 in EMEA The highest Oracle on Oracle (2) ZS3 or ZBA bookings achiever by COB on July 18th 2014 in EMEA  The Prize Winners will be invited to participate to a roundtable chaired by Oracle on Monday September 8th 2014 in Milan and to be guests of Oracle in the evening of September 8th, 2014 at the Teatro Alla Scala. The evening will comprise of a private tour of the Scala museum, cocktail reception at the elegant museum rooms and attending the performance by the renowned Soprano, Maria Agresta. Our guests will then retire for the evening to the Grand Hotel et de Milan, courtesy of Oracle. Oracle shall be the final arbiter in selecting the winners and all winners will be notified via their Oracle account manager.Full details about the contest, expenses covered by Oracle and timetable of events can be found on the Oracle EMEA Hardware (Servers & Storage) Partner Community workspace (FY15 Q1 ZFS Partner Contest). Remember: access to the community workspace requires membership. If you are not a member please register here. Good Luck!! For more information, please contact Sasan Moaveni. (1) Two VAR winners for each EMEA region – Eastern Europe & CIS, Middle East & Africa, South Europe, North Europe, UK/Ireland & Israel - as per the criteria outlined above (2) Oracle on Oracle, in this instance, means ZS3 or ZBA storage attached to DB or DB options, Engineered Systems or Sparc servers sold to the same customer by the same partner within the contest timelines.(3) Two VAD winners, one for each of the criteria outlined above, will be selected from across EMEA. Normal 0 14 false false false IT X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • Lost Windows 7 files

    - by Pader
    My intention was to have a dual boot system with Ubuntu and Windows 7. Obviously I did something wrong because although I had a system menu on booting (is it normal to appear DOS-like?) which gave me an option of booting into windows 7, I was unable to do so. Also, when I booted into Ubuntu, my Windows 7 drive was not available. The Windows 7 drive was an internal 1TB drive partitioned into a 200GB (OS) and a second partition making up the remainder. I was still unable to access this Windows 7 drive even after deleting Ubuntu as I kept getting an 'requires an NTFS drive' error, or something similar. I could not even re-install Windows 7 as the disk was not recognised. I did eventually get the drive back by but I cannot for the life of me remember how. I did try to recover my lost W7 data using Ontrack Easy Recovery (which has always been succesfull in the past for post format recovery) but it would not recognise the 1TB although it was now formatted as NTFS. From other posts on this site, I gather that this is considered a 'Windows 7 Site' problem by Linux users. However, I would dearly love to recover some of my lost Windows 7 files. I had resigned myself to a lot of lost personal data but I happened to notice that a 2TB drive I had connected through a USB docking station had been repartitioned. It must have happened when I installed Ubuntu as I can think of no other explanation. I certainly do not remember consciously requiring Ubuntu to do this. The additional two partitions on the 2TB drive, the original Windows

    Read the article

  • Ubuntu running like mud, system hangs and looks like its running at 3FPS

    - by user240803
    the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

    Read the article

  • Can't install Linux drivers for ASUS N-13 wireless adapter

    - by jcc
    I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

    Read the article

  • Gmail Now Supports Google Drive Integration; Share Files Up to 10GB

    - by Jason Fitzpatrick
    Gmail users can now easily send large files thanks to Google Drive’s increased integration with Gmail–blow through the 25MB in-email attachment limit and share files up to 10GB. From the official Gmail announcement: Have you ever tried to attach a file to an email only to find out it’s too large to send? Now with Drive, you can insert filesup to 10GB – 400 times larger than what you can send as a traditional attachment. Also, because you’re sending a file stored in the cloud, all your recipients will have access to the same, most-up-to-date version.  Like a smart assistant, Gmail will also double-check that your recipients all have access to any files you’re sending. This works like Gmail’s forgotten attachment detector: whenever you send a file from Drive that isn’t shared with everyone, you’ll be prompted with the option to change the file’s sharing settings without leaving your email. It’ll even work with Drive links pasted directly into emails.  The new Gmail/Drive integration is rolling out in waves to users over the next few days and is accessible via the new Gmail compose window. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Trendnet tew-424ub wireless not working after update 12.10

    - by dwa
    I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

    Read the article

  • Wireless connected but internet not working, modem is fine because I'm typing over wifi on my android

    - by Sandro Livaja
    I can't connect to the Internet in 11.10. I tried switching my wifi card to another USB slot but nothing changed. Is it possible that the card is able to connect while not being able to receive packages? $ ifconfig eth0 Link encap:Ethernet HWaddr 40:61:86:35:11:b0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 74:ea:3a:8c:d5:5c inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::76ea:3aff:fe8c:d55c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1209 (1.2 KB) TX bytes:15329 (15.3 KB)

    Read the article

  • recent unreliable wireless connection

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

    Read the article

  • cannot boot Ubuntu after fresh install

    - by Jonathan
    I just installed Ubuntu on a Lenovo v570, and cannot boot into the system. All I get is a loop, where some (bios) info is displayed, and then the computer asks me where I would like to boot from. I tried reinstalling, reinstalling with a custom partition scheme, and boot -repair after the install. None of these work. I can see the files on my harddisk have been copied. I have installed many Ubuntus in the past, as well other distros where custom partitioning is required. I don't know where to find any useful information since I don't even get too the grub menu. One odd thing I noticed. The bios now had options to boot USB, OpenSuse,Fedora, or the HD. I am not dual booting. I also realized that the boot info is for a network boot, which means the computer is not recognizing what to boot. It is boot an HD problem, because I can install other OSs just fine. I am completely stumped. I would like to settle this, and end up with a tutorial, that explains to me what happened.

    Read the article

  • Accessing second hard drive

    - by Jonathan
    So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

    Read the article

  • mount ext4 formated external drive->the drives green light won't stop flashing

    - by Gohlool
    I've installed kubuntu (after 10 years I am trying to play with linux) and manged to attach a external 1TB HDD drive over USB! The drive was formatted with NTFS and everything was working OK. I also changed the /etc/fstab here is my ntfs mount setting: /dev/sdb1 /media/samsung nts-3g auto,user,uid=1000,gid=1000,fmask=000,utf-8 0, 0 Now, I've reparationed the drive and formated it with ext4 filesystem! change my fstb like: /dev/sdb1 /media/samsung ext4 defaults,noatime 0, 0 now, when I plug my dive/or call sudo mount -a, my external drive's green light starts to flash and won't stop, but mount works .... What is the Problem? is this because of ext4? because with NTFS this won't happen! btw. after changing the owner of the /media/samsung and setting permissions 777, I can also access my drive like creating new folder atc. (although is's flashing constantly)! What is my mistake? btw. can you please let me know how to set the owner and the permissions for my /media/samsung directory in fstab for ext4 like I did it for NTFS? Thanks in advance

    Read the article

  • How do I fix a terrible system error on ubuntu 12.04

    - by Anonymous
    I don't know what happened, but one day my computer had some sort of a system error and could no longer update itself. The software center will not open, it will begin to initialize and then a message pops up saying theres a system error and needs to shut down the software center. Then another box pops up after I go to report it saying it was unable to identify source or package name. I also can't extract a zipped folder to anything, or reinstall Ubuntu from a USB boot drive anymore, it keeps telling me my my computer isn't compatible when I know for a fact it is, because thats how I got Ubuntu on here in the first place. the only thing I know about this error is that a message popped up after I went to check for updates saying to report the problem and include this message in the report: 'E:malformed line 56 in source list /etc/apt/sources.list (dist parse)' it also called it a bug. I just want to know how to either get rid of the bug completely or find some way to be able to reinstall Ubuntu again. I know it's not a lot of information, but It's all I can give. Sorry.

    Read the article

  • How can I remove unmounted SD Card icons from my desktop?

    - by user75286
    I have been using some audio utilities in Ubuntu 11.10 to tweak .mp3 files on my phone (Motorola Photon 4G). I connect via USB... both my phone and the internal SD card are mounted as two separate drives. The SD card has an unusual drive name with some odd characters. When I'm finished, I unmount my phone (or "safely remove drive"), but the SD card can't be unmounted. I've mounted and unmounted my phone on 4 occasions now, and there are now 4 SD card drive icons that I can't remove from the desktop. I tried using the gconf-editor/apps/nautilus/desktop trick to make drives invisible and it's not working. Right-clicking on the icons and selecting "unmount" produced the following error message; (I can't type the unusual drive name characters... replaced with xxx) Unable to unmount xxx umount: /media/xxx is not mounted (according to mtab) How can I remove the unwanted icons from the desktop and is there a method for avoiding this problem in the future? Thanks!

    Read the article

  • How to host an AP or a hotspot?

    - by user1048138
    I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

    Read the article

  • M-Audio Delta starts up at wrong sample rate

    - by steevc
    When the PC starts my M-Audio Delta 66 is using 48000kHz sampling rate when it is set for 44100 in Envy24. This causes audio to play slower than it should. This is in Kubuntu 14.04 on my new PC using an AMD A8 6500 with 8GB. When I first installed it seemed okay, but at some point it went wrong and has been doing this consistently since then. Kernel is 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 i686 athlon i686 GNU/Linux steve@slarti:~$ cat /proc/asound/card2/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S32_LE subformat: STD channels: 10 rate: 48000 (48000/1) period_size: 441 buffer_size: 3528 I can get it to switch to 44100 if I disable/enable the Delta in Pulseaudio volume control, but I have to do this every day and the sound still seems distorted. I can't see any issues in any of the config or log files I can find. If I boot the PC with a Mint Live USB it starts at 44100 and sound fine. Originally reported on Youtube is playing at the wrong speed - maybe soundcard related, but I'll close that and have this more relevant question instead.

    Read the article

  • 12.10 install overwrote my windows partition

    - by Niall C
    Recently decided to switch back to Ubuntu. I have a 3TB drive which was running win7. I had 3 partitions. c: for windows d: data e: data Have installed ubuntu before so 'thought' I knew what I was doing. I using netbootin I installed from a usb stick. I didn't choose the default options but I didn't choose the 'manual install' either. I can't remember what option I took but I figured at some stage it would tell me how it was going to partition the disk and at that stage I would see if it had recognised the NTFS partitions and I would be able to abort if it didn't. Unfortunately, it didn't and just went ahead and installed Ubuntu and made up it's own mind on how it was going to partition the disk. Usual story, the two NTFS data partitions weren't backed up. Is there anything I can do to retrieve the ntfs data? I'm currently trying out testdisk and I know I can use photodisk to retrieve certain file types but all the filenames will be lost and it's going to take a hell of a lot of time to rename them all. Any help or assistance would be more than gratefully accepted. Thanks in advance, Niall

    Read the article

  • suggestions for lonewolf dev setup

    - by d33j
    I'm looking for some suggestions for a better development setup. Background: I'm a crusty old software engineer (mostly java of late) and I have around 50 - 100 incomplete java projects scattered everywhere, usb keys, HDDs, and spanning across 5 or 6 computers etc, which have been put on hold for a few years (ie: family). I have no version control at home. I've been using IntelliJ for around 10 years, so that's the only constant. I'm thinking of nominating one machine as a headless server to put all my projects on, maybe a ubuntu box, that way It won't matter which device I'm on, all my projects can be accessed (and I don't have to waste time actually looking for them). I don't need to access code over the net. These are my own 'happy place' projects so I only work on them when I'm at home, however I can see the benefit of the tasking app being online, that way if I think of something while on public transport lets say, I can add it then & there, but it's not a requirement. I can wait until I get home to create tasks. Summary: So I need some sort of version control so I can rollback mistakes, and some sort of simple tasking software where I can assign tasks for myself later on when I get time. I use Subversion, Sonar, Jira and Crucible at work but I think it's a little bit of an overkill for me though. What do you suggest?

    Read the article

  • X won't start, root filesystem mounted read only

    - by TK Kocheran
    I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

    Read the article

  • how do I fix ati driver issue

    - by Michael
    I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

    Read the article

  • Cities from Space: A Tour of Urban Planning Patterns

    - by Jason Fitzpatrick
    While many cities developed haphazardly and organically with little structured planning, other cities were developed following strict organization–organization that reveals itself beautifully when seen from space. Wired magazine shares a roundup of ten well-planned cities viewed with a satellite’s eye. Among the roundup our favorite is the oldest, seen in the photo above: This nine-pointed fortress is perhaps the best example of a planned city from the Renaissance. Palmanova was built in 1593 and is located in the northeastern corner of Italy near the border with Slovenia. It was intended to be home to a completely self-reliant utopian community that could also defend itself against the Ottomans. It had three guarded entrances, ramparts between each of the star points and eventually a moat. Sadly, nobody was willing to move there. Eventually it was used as free housing for pardoned criminals. Today it is a national monument, a tourist destination and home to around 5,000 people. Hit up the link below to check out the other nine well-planned entries in the roundup. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

    Read the article

  • My wireless has suddenly became disabled by hardware switch, BIOS, rfkill, fn+f8 do nothing

    - by cwwk
    I have a toshiba l655d-s5145. There is no physical toggle for the wireless, although the f8 key is supposed to do the trick. It doesn't. The wireless has been working since October, and suddenly, nothing. RFKILL reports that the wireless is hard blocked, but unblock wifi, unblock 0, unblock all do nothing. I inserted a usb dongle, and that is also disabled by hardware switch, although rfkill reports that it is neither hard nor soft blocked. My onboard wireless is 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) according to lspci. Lsmod reports that these drivers are loaded. rtl8192c_common 75767 1 rtl8192ce rtlwifi 110972 1 rtl8192ce I resorted to reformatting the drive and reinstalling, but that also did not work. In BIOS I restored system defaults as there is no specific entry for wifi. Before reinstalling a pure xubuntu I went into Unity and saw that the airplane mode was on and despite being toggled off, it returned to the on position. I'm not sure where to find airplane mode in Xubuntu. What else can I do? I need my wireless.

    Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >