Search Results

Search found 183740 results on 7350 pages for '404 not found'.

Page 229/7350 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

  • "Zend Optimizer not installed" after I updated to Ubuntu 10.04

    - by Eugene
    Hi guys, I've just updated from 9.10 to 10.04. Everything seems to run fine except for zend optimizer which is throwing "Zend Optimizer not installed" error. I went to php.ini and the following line is still there Code: zend_extension=/etc/php5/ZendOptimizer.so Also I checked that the file does exist and that the php.ini I am looking at is in fact the php.ini file that is being used by the server. Please let me know if you have any ideas about how to fix or debug this. Thanks, Eugene

    Read the article

  • Fresh XP Install: PS2 Keyboard not working

    - by RedLeader
    I reformatted a drive to NTFS (not quick) and installed Windows XP on it. Now it's trying to do the graphical portion of the setup, wanting me to click Accepts and Nexts... but I can't! The keyboard works to get to the BIOS and in the BIOS. I have reset the CMOS many times, tried fail-safe and optimized defaults, and even enabled USB Keyboard and mouse support (even though the I have no USB devices plugged in).

    Read the article

  • freebsd-update reports an upgraded jail as not upgraded

    - by Martin Torhage
    I've set up a "Service Jail" in FreeBSD 8.0 according to the FreeBSD Handbook (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html). After upgrading the host to the latest patch level and then performed a jail-upgrade, freebsd-fetch still reports that there are files in need of an update in the jail. Is this expected? Then how do I know if a jail is up to date? This is what I've done in more detail: After the initial setup of the jail freebsd-update fetch reported that there were no updates available neither in the host system nor in the jail. This was expected. A while later freebsd-update fetch reported that the following files where in need of an update both in the host and in the jail. /usr/lib/libssl.a /usr/lib/libssl_p.a /usr/lib/libzpool.a /usr/lib32/libssl.a /usr/lib32/libssl_p.a /usr/lib32/libzpool.a I updated the host and followed the upgrade guide for the jail (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html#JAILS-SERVICE-JAILS-UPGRADING). freebsd-update fetch now reports that there are no updates available in the host but the following is the output from freebsd-update fetch in the jail: [root@bb /]# freebsd-update fetch Looking up update.FreeBSD.org mirrors... 3 mirrors found. Fetching metadata signature for 8.0-RELEASE from update5.FreeBSD.org... done. Fetching metadata index... done. Inspecting system... done. Preparing to download files... done. The following files are affected by updates, but no changes have been downloaded because the files have been modified locally: /var/db/mergemaster.mtree The following files will be updated as part of updating to 8.0-RELEASE-p2: /usr/lib/libssl.a /usr/lib/libssl_p.a /usr/lib/libzpool.a /usr/lib32/libssl.a /usr/lib32/libssl_p.a /usr/lib32/libzpool.a Shouldn't freebsd-update know that the jail is up to date or have I failed upgrading it? How am I supposed to know if a jail is up to date if freebsd-update can't tell? I'm sure I ran make cleandir twice before make buildworld. TIA

    Read the article

  • HISTCONTROL=ignoreboth not working Debian Lenny

    - by Mike
    Can anybody confirm if by setting the the following environmental variables under debian lenny will make previous history entries not to be saved. GNU bash, version 3.2.39(1)-release export HISTCONTROL=ignoreboth export HISTSIZE=500 I have added them to my /etc/bash.bashrc but I keep getting repeated commands. Thanks

    Read the article

  • Centreon setup (web part) config not writeable

    - by Evgeniy
    I have a problem with Centreon installation. At end of install process, I stopped at 10th step: Writable Centreon Configuration File (centreon.conf.php) Critical: Not Writeable /etc/centreon/ asterisk:asterisk (755) Should be : (755) Generate Centreon configuration file OK /etc/centreon/centreon.conf.php asterisk:asterisk (755) Should be : (755) Generate Centstorage configuration file OK /etc/centreon//conf.pm asterisk:asterisk (755) Should be : (755) But permissions and owner are OK. And I tried chmod -R 777 /etc/centreon Please help to understand what's wrong. UPD: Screenshot: http://gyazo.com/82701d119a5e0d98947ad35406a5b8f3

    Read the article

  • Nginx phpmyadmin redirecting to / instead of /phpmyadmin upon login

    - by Frederik Nielsen
    I am having issues with my phpmyadmin on my nginx install. When I enter <ServerIP>/phpmyadmin and logs in, I get redirected to <ServerIP>/index.php?<tokenstuff> instead of <ServerIP>/phpmyadmin/index.php?<tokenstuff> Nginx config file: user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 2; #gzip on; include /etc/nginx/conf.d/*.conf; } Default.conf: server { listen 80; server_name _; #charset koi8-r; #access_log /var/log/nginx/log/host.access.log main; location / { root /usr/share/nginx/html; index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root /usr/share/nginx/html; try_files $uri =404; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; } location /phpmyadmin { root /usr/share/; index index.php index.html index.htm; location ~ ^/phpmyadmin/(.+\.php)$ { try_files $uri =404; root /usr/share/; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $request_filename; include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_script_name; } location ~* ^/phpmyadmin/(.+\.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt))$ { root /usr/share/; } } } (Any general tips on tidying op those config files are accepted too)

    Read the article

  • Wireless Router will not allow connection

    - by Chris
    I am working with a RangeMax(TM) Wireless Router WPN824 v2, and it will not allow a wireless connection nor a wired connection. I am at an actual lost, with no way into the router I cannot test settings. I have unplugged it, left it off for a 32 hours, and reset it with no luck. Any ideas? Could the router just be done-zo?

    Read the article

  • Postfix SMTP auth not working with virtual mailboxes + SASL + Courier userdb

    - by Greg K
    So I've read a variety of tutorials and how-to's and I'm struggling to make sense of how to get SMTP auth working with virtual mailboxes in Postfix. I used this Ubuntu tutorial to get set up. I'm using Courier-IMAP and POP3 for reading mail which seems to be working without issue. However, the credentials used to read a mailbox are not working for SMTP. I can see from /var/log/auth.log that PAM is being used, does this require a UNIX user account to work? As I'm using virtual mailboxes to avoid creating user accounts. li305-246 saslauthd[22856]: DEBUG: auth_pam: pam_authenticate failed: Authentication failure li305-246 saslauthd[22856]: do_auth : auth failure: [user=fred] [service=smtp] [realm=] [mech=pam] [reason=PAM auth error] /var/log/mail.log li305-246 postfix/smtpd[27091]: setting up TLS connection from mail-pb0-f43.google.com[209.85.160.43] li305-246 postfix/smtpd[27091]: Anonymous TLS connection established from mail-pb0-f43.google.com[209.85.160.43]: TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits) li305-246 postfix/smtpd[27091]: warning: SASL authentication failure: Password verification failed li305-246 postfix/smtpd[27091]: warning: mail-pb0-f43.google.com[209.85.160.43]: SASL PLAIN authentication failed: authentication failure I've created accounts in userdb as per this tutorial. Does Postfix also use authuserdb? What debug information is needed to help diagnose my issue? main.cf: # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # SMTP parameters smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtp_tls_security_level = may smtpd_tls_security_level = may smtpd_tls_auth_only = no smtp_tls_note_starttls_offer = yes smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom /etc/postfix/sasl/smtpd.conf pwcheck_method: saslauthd mech_list: plain login /etc/default/saslauthd START=yes PWDIR="/var/spool/postfix/var/run/saslauthd" PARAMS="-m ${PWDIR}" PIDFILE="${PWDIR}/saslauthd.pid" DESC="SASL Authentication Daemon" NAME="saslauthd" MECHANISMS="pam" MECH_OPTIONS="" THREADS=5 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd" /etc/courier/authdaemonrc authmodulelist="authuserdb" I've only modified one line in authdaemonrc and restarted the service as per this tutorial. I've added accounts to /etc/courier/userdb via userdb and userdbpw and run makeuserdb as per the tutorial. SOLVED Thanks to Jenny D for suggesting use of rimap to auth against localhost IMAP server (which reads userdb credentials). I updated /etc/default/saslauthd to start saslauthd correctly (this page was useful) MECHANISMS="rimap" MECH_OPTIONS="localhost" THREADS=0 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r" After doing this I got the following error in /var/log/auth.log: li305-246 saslauthd[28093]: auth_rimap: unexpected response to auth request: * BYE [ALERT] Fatal error: Account's mailbox directory is not owned by the correct uid or gid: li305-246 saslauthd[28093]: do_auth : auth failure: [user=fred] [service=smtp] [realm=] [mech=rimap] [reason=[ALERT] Unexpected response from remote authentication server] This blog post detailed a solution by setting IMAP_MAILBOX_SANITY_CHECK=0 in /etc/courier/imapd. Then restart your courier and saslauthd daemons for config changes to take effect. sudo /etc/init.d/courier-imap restart sudo /etc/init.d/courier-authdaemon restart sudo /etc/init.d/saslauthd restart Watch /var/log/auth.log while trying to send email. Hopefully you're good!

    Read the article

  • dns does not work from different drive letters

    - by n1zero
    C:\>ping localhost Pinging Vextor [127.0.0.1] with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms Control-C ^C C:\>f: F:\>ping localhost Ping request could not find host localhost. Please check the name and try again.

    Read the article

  • Directory listing through FTPS (TLS) is not working

    - by Aron Rotteveel
    We recently switched our server to require TLS for every connection. This is working flawlessly so far, but one of our clients is having problems. Some facts: Server uses Pure-FTPD Server has a passive port range configured Server has no firewall limitations regarding the FTP Client uses WS FTP Client is behind a router Client connects to the same IP as every other, using PASSIVE mode All other clients have no trouble connecting Because of the TLS requirement, connecting using ACTIVE mode is almost not possible, but PASSIVE is working fine for everyone except this specific client. It seems that he is able to connect, but once a LIST command is performed, things go wrong. Log: Finding Host <clienthost> ... Connecting to <serverip:21> Connected to <serverip:21> in 0.020000 seconds, Waiting for Server Response Initializing SSL Session ... 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-You are user number 5 of 50 allowed. 220-Local time is now 22:14. Server port: 21. 220-This is a private system - No anonymous login 220-IPv6 connections are also welcome on this server. 220 You will be disconnected after 15 minutes of inactivity. AUTH TLS 234 AUTH TLS OK. SSL session NOT set for reuse SSL Session Started. Host type (1): Automatic Detect USER <user> 331 User <user> OK. Password required PASS (hidden) 230-User <user> has group access to: <user> 230 OK. Current restricted directory is / SYST 215 UNIX Type: L8 Host type (2): Unix (Standard) PBSZ 0 200 PBSZ=0 PROT P 200 Data protection level set to "private" PWD 257 "/" is your current location CWD /public_html 250 OK. Current directory is /public_html PWD257 "/public_html" is your current location TYPE A 200 TYPE is now ASCII PASV 227 Entering Passive Mode (<serverip>,132,100) connecting data channel to <serverip>:132,100(33892) Substituting connection address <serverip> for private address <serverip> from PASV Using external address <customer ext. ip> instead of local address <customer int. ip> for PORT command PORT 82,161,56,225,195,181 200 PORT command successful LIST Error reading response from server. It appears that the connection is dead. Attempting reconnect... Any help is appreciated.

    Read the article

  • SSL_CLIENT_CERT_CHAIN not being passed to backend server

    - by nidkil
    I have client certificate configured and working in Apache. I want to pass the PEM-encoded X.509 certificates of the client to the backend server. I tried with the SSLOptions +ExportCertData. This does nothing at all, while the documentation states it should add SSL_SERVER_CERT, SSL_CLIENT_CERT and SSL_CLIENT_CERT_CHAINn (with n = 0,1,2,..) as headers. Any ideas why this option is not working? I then tried setting the headers myself using RequestHeader. This works fine for all variables except SSL_CLIENT_CERT_CHAIN. It shows null in the header. Any ideas why the certificate chain is not being filled? This is my first Apache configuration: <VirtualHost 192.168.56.100:443> ServerName www.test.org ServerAdmin webmaster@localhost DocumentRoot /var/www ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined SSLEngine on SSLProxyEngine on SSLCertificateFile /etc/apache2/ssl/certs/www.test.org.crt SSLCertificateKeyFile /etc/apache2/ssl/private/www.test.org.key SSLCACertificateFile /etc/apache2/ssl/ca/ca.crt <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> <Location /carbon> ProxyPass http://www.test.org:9763/carbon ProxyPassReverse http://www.test.org:9763/carbon </Location> <Location /services/GbTestProxy> SSLVerifyClient require SSLVerifyDepth 5 SSLOptions +ExportCertData ProxyPass http://www.test.org:8888/services/GbTestProxy ProxyPassReverse http://www.test.org:8888/services/GbTestProxy </Location> </VirtualHost> This is my second Apache configuration: <VirtualHost 192.168.56.100:443> ServerName www.test.org ServerAdmin webmaster@localhost DocumentRoot /var/www ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined SSLEngine on SSLProxyEngine on SSLCertificateFile /etc/apache2/ssl/certs/www.test.org.crt SSLCertificateKeyFile /etc/apache2/ssl/private/www.test.org.key SSLCACertificateFile /etc/apache2/ssl/ca/ca.crt <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> <Location /carbon> ProxyPass http://www.test.org:9763/carbon ProxyPassReverse http://www.test.org:9763/carbon </Location> <Location /services/GbTestProxy> SSLVerifyClient require SSLVerifyDepth 5 RequestHeader set SSL_CLIENT_S_DN "%{SSL_CLIENT_S_DN}s" RequestHeader set SSL_CLIENT_I_DN "%{SSL_CLIENT_I_DN}s" RequestHeader set SSL_CLIENT_S_DN_CN "%{SSL_SERVER_S_DN_CN}s" RequestHeader set SSL_SERVER_S_DN_OU "%{SSL_SERVER_S_DN_OU}s" RequestHeader set SSL_CLIENT_CERT "%{SSL_CLIENT_CERT}s" RequestHeader set SSL_CLIENT_CERT_CHAIN0 "%{SSL_CLIENT_CERT_CHAIN0}s" RequestHeader set SSL_CLIENT_CERT_CHAIN1 "%{SSL_CLIENT_CERT_CHAIN1}s" RequestHeader set SSL_CLIENT_VERIFY "%{SSL_CLIENT_VERIFY}s" ProxyPass http://www.test.org:8888/services/GbTestProxy ProxyPassReverse http://www.test.org:8888/services/GbTestProxy </Location> </VirtualHost> Hope someone can help. Regards, nidkil

    Read the article

  • radvd is not assigning prefix

    - by Samik
    I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. I've obtained the ULA prefix from here. Contents of /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 net.ipv6.conf.all.forwarding = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 Contents of /etc/radvd.conf # NOTE: there is no such thing as a working "by-default" configuration file. # At least the prefix needs to be specified. Please consult the radvd.conf(5) # man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help. # # interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 10; AdvDefaultPreference low; AdvHomeAgentFlag off; prefix fd8a:8d9d:808f:1::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr on; }; }; Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes I've also enabled radvd at startup through chkconfig. Though I noticed that radvd is starting after interfaces are brought up. I've tried restarting the network service afterwards but still I get the following link-local address only #ip -6 addr show 1: lo: mtu 16436 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qlen 1000 inet6 fe80::5054:ff:fe74:d746/64 scope link valid_lft forever preferred_lft forever Edit: Based on the answer given by Sander Steffann I still need clarification on some points but I'm posting here what worked. Contents of /etc/sysconfig/network NETWORKING=yes HOSTNAME=syslog-ng-server NETWORKING_IPV6=yes IPV6FORWARDING=yes Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes IPV6FORWARDING=no Removed following line from /etc/sysctl.conf net.ipv6.conf.all.forwarding = 1 Contents of /etc/radvd.conf is as previous.

    Read the article

  • OCZ Vertex 2 not recognized by Ubuntu installer

    - by Zsub
    As I boot into the Ubuntu 10.10 (or 11.04, doesn't matter) live environment or installer, it just refuses to recognise my Vertex 2. It reports the disk as ATA and not supporting smart, shows no serial number, and doesn't list the size correctly. All fdisk tells me is Unable to read /dev/sda (it's the only storage in the PC). I'm now running a temporary install of Windows 7 off of it, which worked like a charm, so where am I going wrong with Ubuntu... Specs: Asus M4N68T-M LE V2 (BIOS 0702, most recent) OCZ Vertex 2 SSD 60 GB Amd Athlon II X4 640 Patriot PSD34G13332 4GB DDR3 ram (two banks) EDIT I installed a second drive, installed Ubuntu on that and booted, it recognised the SSD just fine. I'm now trying to apt-get upgrade the live-environment. I wonder if there is any way to sort of install Ubuntu from Ubuntu (I boot into the working install on the other drive, install it on the SSD and then boot from the SSD). EDIT2 Ok, so that doesn't work. The install detects the SSD, however, it cannot format it. EDIT3 After a fresh boot I can read out SMART-data and even perform a read-benchmark, but if I try to format it, or do a write-bench, it'll crap out and after that it says SMART is not supported. So basically it seems I can't write to the disk, as it will stop working when I do, I will try to run repeated read-benchmarks to see if that has any effect. EDIT4 I'm running several read benchmarks on the drive right now, they give results that are to be expected from an SSD. If the read-benches don't fail, I can use fdisk on the disk, but it is now stuck trying to re-read the partition table after issueing the 'w' command. EDIT5 Parted Magic did recognize the drive and with hdparm -I even could tell me the drive was in a frozen state. I powercycled it (just pull out the plug from the SSD and plug it back in) and it wasn't frozen anymore. After that I could upgrade the firmware on the drive (still using Parted Magic) and format it to Ext4. After I rebooted into the Ubuntu installer, it wouldn't get recognized and hdparm didn't want to talk to it saying HDIO_DRIVE_CMD(identify) failed: Invalid exchange. EDIT6 For some reason if I enable one of the RAID controllers (the one the SSD is connected to, obviously) Ubuntu will let me format it, mount it and write to it. The installer also recognizes it. However if the raid controller is enabled but no array is defined the motherboard can't boot from it :(

    Read the article

  • wvMaxima Error: "Not Connected To Maxima" on Windows

    - by muntoo
    Maxima gives an error "Not Connected To Maxima" whenever I try to do anything with it. I've looked around, but I couldn't figure out how to fix this on Windows. The only results I got were for Fedora. According to them, I think this may have something to do with the Firewall, but I can't figure out what. I even tried adding wvMaxima to the Windows Firewall exceptions list, but the same error comes up.

    Read the article

  • Windows 7: Menu 'New->Text document' is missing, when not admin user

    - by Isamux
    Hi, when I'm logged in as a user that is not member of the administrator group the entry to create a new textfile is missing from the right click "New" menu. If I give the user admin rights or start the explorer with admin rights the "New - text document" menu entry magically appears. As far as I can see the registry entries are correct. Anybody got a solution for that side effect of beeing a normal user in windows?? Regards

    Read the article

  • apache2: Could not reliably determine the server's fully qualified domain name

    - by Joseph Silvashy
    I've never encountered this error before. And secondly I'd like to know how you folks debug your apache configurations. apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName In my Virtual Host configuration I do have these lines: ServerName example.com ServerAlias www.example.com (of course it has my actual info in there) So I guess my question is, why wouldn’t apache be able to determine my fully qualified domain name?

    Read the article

  • nginx, php-fpm, and multiple roots - how to properly try_files?

    - by Carson C.
    I have a server context which is rooted in a login application. The login application handles, well, logins, and then returns a redirect to "/app" on the same server if a login is successful. The application is rooted elsewhere, which is handled by the location block shown here: location ^~ /app { alias /usr/share/nginx/www/website.com/content/public; location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/tmp/php5-fpm.sock; include fastcgi_params; } } This works just fine, however the $uri getting passed to PHP still contains /app, even though I am using alias rather than root. Because of this, the try_files directive fails to a 404 unless I link app -> ./ in /usr/share/nginx/www/website.com/content/public. It's obviously silly to have that link in there, and if that link ever gets lost, bam dead website without an obvious cause. The next thing I tried... Was to remove the try_files directive entirely. This allowed me to rm the app link in my /public folder, and PHP had no problem locating the file and executing it. I used that to dump my $_SERVER global from PHP, and found that "SCRIPT_FILENAME" => "/usr/share/nginx/www/website.com/content/public/index.php" when the browser URI is /app. This is exactly right. Based on my fastcgi_params below, this led me to beleive that try_files $request_filename =404; should work, but no dice. nginx still doesn't find the file, and returns 404. So for right now, it will only work without any try_files directive. PHP finds the file, whereas try_files could not. I understand this may be a PHP security risk. Can anyone indicate how to move forward? The nginx logs don't contain anything relating to the failed try_files attempt, as far as I can see. fastcgi_aparams fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $server_https;

    Read the article

  • Choose Default Program does not work (is broken) on Windows

    - by Piotr Dobrogost
    For some time now when I click Open with...|Choose Default Program from Windows Explorer's context menu I'm getting this error This file does not have a program associated with it to perform this action. Create an association in the Set Associations control panel. I'm getting this error no matter what the extension of the selected file is. Any ideas how to fix this?

    Read the article

  • Group Policy: Not working after few days

    - by Kabir Rao
    Hi, I have implemented a group policy as per the suggestion http://serverfault.com/questions/121065/change-local-computer-policy-on-windows-2003-terminal-server . it worked fine when i tested..but after two days it is not working...can somebody help. Thanks, Kabir

    Read the article

  • Installing Windows server 2008 on not VT system

    - by Shahid
    I have a Dell Inspiron 1440 laptop and it has no virtualization support, i want to install Windows Server 2008 on it using Virtual Box, i know that we can install Mac OS on not Virtualization supported system using some patch. I also haired that Virtual box don't needs hardware virtualization, it will do that using software virtualization. how can i achieve that, any guidance would be very nice. Thanks

    Read the article

  • SCSI drives not showing up in Linux CentOS 4

    - by Mohammad
    So I have a poweredge 6650 with Perc 3 installed. on the first channel of raid controller I have 2x 73gb configured in raid 1. On the second channel I have two 300GB drives that are stand alone. The two 300gb drives do not show up in linux, (no /dev/sdb*)... Can perc 3 support non-raid and raid drives combined? Is there any settings I may be missing? Thanks in advance :)

    Read the article

  • Windows 7: Creating a password-protected task (NOT a programming question)

    - by Matthias
    Hello, I would like to configure a task like "child control software", so it would hibernate the pc at certain times. Is it possible to prevent modification (here: pausing) of a task through requiring the entering of the admin password to modify, EVEN THOUGH the currently-logged-in (and only) user is the admin account itself? (Do you know of any child control software that does NOT require an additional account yet is able to hibernate the system at certain times?) Thanks a lot! Matthias

    Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >