Search Results

Search found 17267 results on 691 pages for 'dynamic ip'.

Page 229/691 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Windows 2003 DNS updates from ISC DHCP server

  - by wolfgangsz

  We have a very mixed network, with most clients being Debian Lenny, the rest Windows XP/Vista/7. The network itself is split into two segments (for technical reasons) called "corporate" and "engineering". On the "corporate" side all clients get their IP addresses from a Windows DHCP server and the dynamic updates into the Windows DNS work just fine. On the "engineering" side, clients get their IP addresses from a linux machine running the standard ISC DHCP server. Although this server is configured to do dynamic DNS updates, they actually don't work. Anybody got any advice on how to fix this? Please note: dynamic updates from the clients directly into the DNS would work, but are not an option for us. So this is strictly on how make this work from an ISC DHCP server to a Windows DNS server.

  Read the article

• How can I set up a fault-tolerant web-service built with Erlang/OTP?

  - by Jonas

  I would like to setup a fault-tolerant web-service. I will build the web-service with Erlang/OTP. At the beginning the web-service will be hosted on a few VPS. Each VPS has its own IP-address, and I can use more if IPs if I need. I would like to have the domain name pointing to a single IP-address. How can setup my Erlang/OTP-application to be fault-tolerant behind a single IP-address? Do I need to use VLAN? Is there a way my Erlang/OTP-application can use heartbeats and handle virtual IP-addresses to route the traffic? or how should I solve this problem?

  Read the article

• PHP voting system with sessions?

  - by pingu

  Hi guys, I've been reading up on stackoverflow about creating voting systems in PHP that minimize abuse/multiple voting from the same user, but I haven't come across the answer to my question. I've got an application where users don't need to register to vote or "like" an entry. Obviously, I want to minimize abuse and I don't want to limit votes per IP address because some organisations (mine included) use shared IP addresses. I've never used sessions in a non-authenticated system before, but since this application is centered around entry votes I was wondering if this approach would work and whether there were any disadvantages such as performance implications, and whether it's even possible to use sessions in this way: start a session when the website is loaded allow one vote per item per session If this is a bad idea, my alternative options would be to allow a reasonable number of votes per IP address (say 25), or put a time limit between votes from the same IP address. What do you guys recommend?

  Read the article

• WCF - (504) The server did not return a response for this request.

  - by Sanjay Sen

  I have a JSONP WCF service,using back end as MySql.It is working properly when i run it locally with visual studio. Now we have hosted it in Windows Server 2003. Now there is very strange problem occurring.. When I do a request with fiddler which does not require much processing internally, it gives me result 200 OK with desired output as response, But when I do a request which requires some internal data processing, it gives me 504 error(gateway time out error). I also looked at C:\WINDOWS\system32\LogFiles to see if it logs any error but it shows ok result in fiddler request which is as follows: Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2010-04-07 10:08:06 W3SVC490896353 s-ip GET /InitialState.svc/GetInitialState reference=1&pageId=18 8080 - c-ip Fiddler 200 0 64 Can anyone please help me to resolve the problem ?? Or any ideas i can try to find out why it is happening ?? Any help will be appreciated...

  Read the article

• How to get IPaddress from domain name in java

  - by giri

  HI I am writing an application where I need IP address. I have domain name, but I like to know hoe to get IP address from domain name. For ex www.girionjava.com how to get IP address of this by programming in java. Thanks

  Read the article

• Python Socket Getting Connection Reset

  - by Ian

  I created a threaded socket listener that stores newly accepted connections in a queue. The socket threads then read from the queue and respond. For some reason, when doing benchmarking with 'ab' (apache benchmark) using a concurrency of 2 or more, I always get a connection reset before it's able to complete the benchmark (this is taking place locally, so there's no external connection issue). class server: _ip = '' _port = 8888 def __init__(self, ip=None, port=None): if ip is not None: self._ip = ip if port is not None: self._port = port self.server_listener(self._ip, self._port) def now(self): return time.ctime(time.time()) def http_responder(self, conn, addr): httpobj = http_builder() httpobj.header('HTTP/1.1 200 OK') httpobj.header('Content-Type: text/html; charset=UTF-8') httpobj.header('Connection: close') httpobj.body("Everything looks good") data = httpobj.generate() sent = conn.sendall(data) def http_thread(self, id): self.log("THREAD %d: Starting Up..." % id) while True: conn, addr = self.q.get() ip, port = addr self.log("THREAD %d: responding to request: %s:%s - %s" % (id, ip, port, self.now())) self.http_responder(conn, addr) self.q.task_done() conn.close() def server_listener(self, host, port): self.q = Queue.Queue(0) sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.bind( (host, port) ) sock.listen(5) for i in xrange(4): #thread count thread.start_new(self.http_thread, (i+1, )) while True: self.q.put(sock.accept()) sock.close() server('', 9999) When running the benchmark, I get totally random numbers of good requests before it errors out, usually between 4 and 500. Edit: Took me a while to figure it out, but the problem was in sock.listen(5). Because I was using apache benchmark with a higher concurrency (5 and up) it was causing the backlog of connections to pile up, at which point the connections started getting dropped by the socket.

  Read the article

• How can I read this url in Rebol ?

  - by Rebol Tutorial

  when trying to read this kind of url URL: http://v4.lscache2.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id,expire,ip,ipbits,itag,algorithm,burst,factor,oc:U0dWSlhTVF9FSkNNNl9QTVhJ&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1275886800&key=yt1&signature=89195E808CB3FBBC7BDE7298A1DC0613D7987F00.D3064112E8F479C523F8DF4FBFDF392CE48167C2&factor=1.25&id=34e01ad39b34b5c9& I get this error read/binary url connecting to: v4.lscache2.c.youtube.com ** User Error: Error. Target url: http://v4.lscache2.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id,expire,ip,ipbits, itag,algorithm... ** Near: read/binary url

  Read the article

• Are there any Opensource, free XF.Network analogs (product for creating fast servers with .Net)

  - by Ole Jak

  Opensource, free XF.Network analogs (product for creating High Performance TCP/IP Server using C#.NET)

  Read the article

• Dimdim Change name

  - by islam

  i build dimdim v4.5 on my pc and its work fine with me. each time i want to start meeting i type my pc IP address like this : http://<my-ip-address>/dimdim i want to change the word dimdim to be anything else like : http://<my-ip-address>/meeting regards

  Read the article

• PHP and MySql trouble

  - by Espen Arnoy

  I am having trouble making this seemingly simple MySql query work. Can anyone spot the problem? <?php include "config.php"; $offerid = $_POST["offerid"]; $ip = $_SERVER["REMOTE_ADDR"]; mysql_query("INSERT INTO voted (offerid,ip) VALUES (".$offerid.",".$ip.")"); ?>

  Read the article

• RHEL Cluster FAIL after changing time on system

  - by Eugene S

  I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved however I didn't capture it completely. In order to investigate the issue I looked at /var/log/messages and I've discovered the following: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering GATHER state from 0. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Creating commit token because I am the rep. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Storing new sequence id for ring 354 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering COMMIT state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering RECOVERY state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [0] member 192.168.1.49: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 848 rep 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru 61 high delivered 61 received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Did not need to originate any messages in recovery. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Sending initial ORF token Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CMAN ] quorum lost, blocking activity Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [SYNC ] This node is within the primary component and will provide service. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering OPERATIONAL state. Mar 22 16:40:42 hsmsc50sfe1a kernel: dlm: closing connection to node 2 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a clurgmgrd[25809]: <emerg> #1: Quorum Dissolved Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 1 Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Cluster is not quorate. Refusing connection. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing connect: Connection refused Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-21). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing disconnect: Invalid request descriptor Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering GATHER state from 9. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Creating commit token because I am the rep. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Storing new sequence id for ring 358 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering COMMIT state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering RECOVERY state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [0] member 192.168.1.49: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 852 rep 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru f high delivered f received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [1] member 192.168.1.51: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 852 rep 192.168.1.51 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru f high delivered f received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Did not need to originate any messages in recovery. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Sending initial ORF token Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [SYNC ] This node is within the primary component and will provide service. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering OPERATIONAL state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [MAIN ] Node chb_sfe2a not joined to cman because it has existing state Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.51 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 2 Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Cluster is not quorate. Refusing connection. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing connect: Connection refused Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-111). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing get: Invalid request descriptor Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-21). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing disconnect: Invalid request descriptor How could this be related to the time change procedure I performed?

  Read the article

• mysql query: SELECT DISTINCT column1, GROUP BY column2

  - by Adam

  Right now I have the following query: SELECT name, COUNT(name), time, price, ip, SUM(price) FROM tablename WHERE time >= $yesterday AND time <$today GROUP BY name And what I'd like to do is add a DISTINCT by column 'ip', i.e. SELECT DISTINCT ip FROM tablename So my final output would be all the columns, from all the rows that where time is today, grouped by name (with name count for each repeating name) and no duplicate ip addresses. What should my query look like? (or alternatively, how can I add the missing filter to the output with php)? Thanks in advance.

  Read the article

• How does Windows Remote Desktop Connection Work?

  - by Devoted

  How does Windows Remote Desktop connection work? An IP address is used to connect to the computer but....how can that IP be accessed from anywhere? If, for example, the IP address is 192.168.1.55, there MUST be another 192.168.1.55 somewhere else in the world. How does Remote Desktop know which one to connect to? Thanks so much

  Read the article

• Dns caching for sockets

  - by Poma

  I'm connecting to some websites through socks proxy server. In my case its very good to implement dns cache, so proxy don't need to resolve website's ip address. So, I performed DNS lookup, but don't know where to supply IP address. mySocket.Connect uses proxy's ip address so it isn't right place. I tried to place it in http header GET http://11.22.33.44/index.html HTTP/1.1 - this doesn't work (even in browser) since website is on virtual hosting. It seems that Host header is right place for resolved ip address. Am I right? Will proxy resolve host name (since it's still there in GET header) or not?

  Read the article

• redirecting domain to nameservers in heroku?

  - by user163352

  i have configured my domain to heroku ip's 75.101.163.44 75.101.145.87 174.129.212.2 But its not redirecting my app to domain..error says There is no app configured at that hostname. Perhaps the app owner has renamed it, or you mistyped the URL. did each heroku app has unique ip address.if so how to get the unique ip and how to redirect it to domain.. thanks..

  Read the article

• nginx error: (99: Cannot assign requested address)

  - by k-g-f

  I am running Ubuntu Hardy 8.04 and nginx 0.7.65, and when I try starting my nginx server: $ sudo /etc/init.d/nginx start I get the following error: Starting nginx: [emerg]: bind() to IP failed (99: Cannot assign requested address) where "IP" is a placeholder for my IP address. Does anybody know why that error might be happening? This is running on EC2. My nginx.conf file looks like this: user www-data www-data; worker_processes 4; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; access_log /usr/local/nginx/logs/access.log; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 3; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /usr/local/nginx/sites-enabled/*; } and my /usr/local/nginx/sites-enabled/example.com looks like: server { listen IP:80; server_name example.com; rewrite ^/(.*) https://example.com/$1 permanent; } server { listen IP:443 default ssl; ssl on; ssl_certificate /etc/ssl/certs/myssl.crt; ssl_certificate_key /etc/ssl/private/myssl.key; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP; server_name example.com; access_log /home/example/example.com/log/access.log; error_log /home/example/example.com/log/error.log; }

  Read the article

• How to flush DNS cache in Windows Mobile programmatically?

  - by Bounded

  Hello, My windows mobile application (written in C# with the compact framework) needs to know if a particular machine is active or not. To achieve this goal, I thought to use a ping mechanism. I tried to use the Ping class implemented in the opennetcf framework (the System.Net.NetworkInformation.Ping class for the .NET Framework is not part of the compact framework). Because I give to the Ping.Send function a host name, it first tries to resolve this host name and to retrieve an IP address. But i observe the following problem : If the first dns resolution fails (because the network is down at this moment), and if the application tries immediately again to send the ping, it fails too, even if the network is note down anymore. I check with a famous network protocol analyzer and i saw that only the requests concerning the first dns resolution are sent. The requests concerning the dns resolution of the second ping are not sent. Why is the second dns request not sent ? Is there any dns cache mechanism on such Windows Mobile devices ? If yes, can this mechanism beeing flushed programmatically ? EDIT : I gave up finding a solution to this DNS flush. I chose to ping an IP adress instead of a name machine. The problem of pinging an hard coded adress IP is that we have to be 100% sure that this IP will not change. The gateway IP can be used because it's always reachable (if it does not, it means the network is down).

  Read the article

• Setting variables in shell script by running commands

  - by rajya vardhan

  >cat /tmp/list1 john jack >cat /tmp/list2 smith taylor It is guaranteed that list1 and list2 will have equal number of lines. f(){ i=1 while read line do var1 = `sed -n '$ip' /tmp/list1` var2 = `sed -n '$ip' /tmp/list2` echo $i,$var1,$var2 i=`expr $i+1` echo $i,$var1,$var2 done < $INFILE } So output of f() should be: 1,john,smith 2,jack,taylor But getting 1,p,p 1+1,p,p If i replace following: var1 = `sed -n '$ip' /tmp/list1` var2 = `sed -n '$ip' /tmp/list2` with this: var1=`head -$i /tmp/vip_list|tail -1` var2=`head -$i /tmp/lb_list|tail -1` Then output: 1,john,smith 1,john,smith Not an expert of shell, so please excuse if sounds childish :)

  Read the article

• Given a trace of packets, how would you group them into flows?

  - by zxcvbnm

  I've tried it these ways so far: 1) Make a hash with the source IP/port and destination IP/port as keys. Each position in the hash is a list of packets. The hash is then saved in a file, with each flow separated by some special characters/line. Problem: Not enough memory for large traces. 2) Make a hash with the same key as above, but only keep in memory the file handles. Each packet is then put into the hash[key] that points to the right file. Problems: Too many flows/files (~200k) and it might run out of memory as well. 3) Hash the source IP/port and destination IP/port, then put the info inside a file. The difference between 2 and 3 is that here the files are opened and closed for each operation, so I don't have to worry about running out of memory because I opened too many at the same time. Problems: WAY too slow, same number of files as 2 so also impractical. 4) Make a hash of the source IP/port pairs and then iterate over the whole trace for each flow. Take the packets that are part of that flow and place them into the output file. Problem: Suppose I have a 60 MB trace that has 200k flows. This way, I would process, say, a 60 MB file 200k times. Maybe removing the packets as I iterate would make it not so painful, but so far I'm not sure this would be a good solution. 5) Split them by IP source/destination and then create a single file for each one, separating the flows by special characters. Still too many files (+50k). Right now I'm using Ruby to do it, which might've been a bad idea, I guess. Currently I've filtered the traces with tshark so that they only have relevant info, so I can't really make them any smaller. I thought about loading everything in memory as described in 1) using C#/Java/C++, but I was wondering if there wouldn't be a better approach here, especially since I might also run out of memory later on even with a more efficient language if I have to use larger traces. In summary, the problem I'm facing is that I either have too many files or that I run out of memory. I've also tried searching for some tool to filter the info, but I don't think there is one. The ones I've found only return some statistics and wouldn't scan for every flow as I need.

  Read the article

• g++ symbol versioning. Set it to GCC_3.0 using version 4 of g++

  - by Ismael

  Hi all I need to implemente a Java class which uses JNI to control a fiscal printer in XUbuntu 8.10 with sun-java6-jdk installed. The structure is the following: EpsonDriver.java loads libEpson.so libEpson is linked dynamically with EpsonFiscalProtocol.so ( provided by Epson, no source available ) and pthread I use javah to generate the header file, and the code compiles. Then I put the libEpson.so in $JAVA_HOME/jre/lib/i386, and EpsonDriver.java uses an static initializar System.loadLibrary("libEpson") That part works, however, when I try to use any of the methods I get an unsatisfiedLinkError exception. Some time ago, a coworker did a version that works, and using objdump -Dslx I got the following: Program Header: LOAD off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**12 filesz 0x0000ccc4 memsz 0x0000ccc4 flags r-x LOAD off 0x0000d000 vaddr 0x0000d000 paddr 0x0000d000 align 2**12 filesz 0x00000250 memsz 0x00044a5c flags rw- DYNAMIC off 0x0000d014 vaddr 0x0000d014 paddr 0x0000d014 align 2**2 filesz 0x000000f0 memsz 0x000000f0 flags rw- NOTE off 0x000000d4 vaddr 0x000000d4 paddr 0x000000d4 align 2**2 filesz 0x00000024 memsz 0x00000024 flags r-- STACK off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**2 filesz 0x00000000 memsz 0x00000000 flags rw- Dynamic Section: NEEDED EpsonFiscalProtocol.so NEEDED libpthread.so.0 NEEDED libstdc++.so.6 NEEDED libm.so.6 NEEDED libc.so.6 SONAME libcom_tichile_jpos_EpsonSerialDriver.so INIT 0x00007254 FINI 0x0000ba08 GNU_HASH 0x000000f8 STRTAB 0x00001f50 SYMTAB 0x00000ae0 STRSZ 0x00002384 SYMENT 0x00000010 PLTGOT 0x0000d108 PLTRELSZ 0x00000008 PLTREL 0x00000011 JMPREL 0x0000724c REL 0x000045c4 RELSZ 0x00002c88 RELENT 0x00000008 TEXTREL 0x00000000 VERNEED 0x00004564 VERNEEDNUM 0x00000002 VERSYM 0x000042d4 RELCOUNT 0x000000ac Version References: required from libstdc++.so.6: 0x056bafd3 0x00 05 CXXABI_1.3 0x08922974 0x00 04 GLIBCXX_3.4 required from libc.so.6: 0x0b792650 0x00 03 GCC_3.0 0x0d696910 0x00 02 GLIBC_2.0 In the recently compiled file I get: Program Header: LOAD off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**12 filesz 0x00005300 memsz 0x00005300 flags r-x LOAD off 0x00005300 vaddr 0x00006300 paddr 0x00006300 align 2**12 filesz 0x00000274 memsz 0x00010314 flags rw- DYNAMIC off 0x00005314 vaddr 0x00006314 paddr 0x00006314 align 2**2 filesz 0x000000e0 memsz 0x000000e0 flags rw- EH_FRAME off 0x00004a00 vaddr 0x00004a00 paddr 0x00004a00 align 2**2 filesz 0x00000154 memsz 0x00000154 flags r-- Dynamic Section: NEEDED libstdc++.so.5 NEEDED libm.so.6 NEEDED libgcc_s.so.1 NEEDED libc.so.6 SONAME EpsonFiscalProtocol.so INIT 0x00001cb4 FINI 0x00004994 HASH 0x000000b4 STRTAB 0x00000da4 SYMTAB 0x000004f4 STRSZ 0x00000acf SYMENT 0x00000010 PLTGOT 0x0000640c PLTRELSZ 0x00000270 PLTREL 0x00000011 JMPREL 0x00001a44 REL 0x000019dc RELSZ 0x00000068 RELENT 0x00000008 VERNEED 0x0000198c VERNEEDNUM 0x00000002 VERSYM 0x00001874 RELCOUNT 0x00000004 Version References: required from libstdc++.so.5: 0x056bafd2 0x00 04 CXXABI_1.2 required from libc.so.6: 0x09691f73 0x00 03 GLIBC_2.1.3 0x0d696910 0x00 02 GLIBC_2.0 So I suspect the main diference is the GCC_3.0 symbol I compile libcom_tichile_EpsonSerialDriver.so with the following command ( from memory as I not at work right now ) g++ -Wl,-soname=.... -shared -I/*jni libraries*/ -o libcom_tichile_jpos_EpsonSerialDriver -lEpsonFiscalProtocol -lpthread Is there any way to tell g++ to use that symbol version? Or any idea in how to make it work? EDIT: I have another non-working version with the followin dump: Program Header: LOAD off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**12 filesz 0x0000bf68 memsz 0x0000bf68 flags r-x LOAD off 0x0000cc0c vaddr 0x0000cc0c paddr 0x0000cc0c align 2**12 filesz 0x000005e8 memsz 0x00044df0 flags rw- DYNAMIC off 0x0000cc20 vaddr 0x0000cc20 paddr 0x0000cc20 align 2**2 filesz 0x000000f8 memsz 0x000000f8 flags rw- EH_FRAME off 0x0000b310 vaddr 0x0000b310 paddr 0x0000b310 align 2**2 filesz 0x000002bc memsz 0x000002bc flags r-- STACK off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**2 filesz 0x00000000 memsz 0x00000000 flags rw- RELRO off 0x0000cc0c vaddr 0x0000cc0c paddr 0x0000cc0c align 2**0 filesz 0x000003f4 memsz 0x000003f4 flags r-- Dynamic Section: NEEDED EpsonFiscalProtocol.so NEEDED libpthread.so.0 NEEDED libstdc++.so.6 NEEDED libm.so.6 NEEDED libgcc_s.so.1 NEEDED libc.so.6 SONAME libcom_tichile_jpos_EpsonSerialDriver.so INIT 0x000055d8 FINI 0x0000a968 HASH 0x000000f4 GNU_HASH 0x00000a30 STRTAB 0x00002870 SYMTAB 0x00001410 STRSZ 0x00002339 SYMENT 0x00000010 PLTGOT 0x0000cff4 PLTRELSZ 0x00000168 PLTREL 0x00000011 JMPREL 0x00005470 REL 0x00004ea8 RELSZ 0x000005c8 RELENT 0x00000008 VERNEED 0x00004e38 VERNEEDNUM 0x00000002 VERSYM 0x00004baa RELCOUNT 0x00000001 Version References: required from libstdc++.so.6: 0x056bafd3 0x00 05 CXXABI_1.3 0x08922974 0x00 03 GLIBCXX_3.4 required from libc.so.6: 0x09691f73 0x00 06 GLIBC_2.1.3 0x0d696914 0x00 04 GLIBC_2.4 0x0d696910 0x00 02 GLIBC_2.0 Now I think the main difference is in the GCC_3.0 symbol/ABI EDIT: Luckily, a coworker found a way to talk to the printer using Java

  Read the article

• Malware - Technical anlaysis

  - by nullptr

  Note: Please do not mod down or close. Im not a stupid PC user asking to fix my pc problem. I am intrigued and am having a deep technical look at whats going on. I have come across a Windows XP machine that is sending unwanted p2p traffic. I have done a 'netstat -b' command and explorer.exe is sending out the traffic. When I kill this process the traffic stops and obviously Windows Explorer dies. Here is the header of the stream from the Wireshark dump (x.x.x.x) is the machines IP. GNUTELLA CONNECT/0.6 Listen-IP: x.x.x.x:8059 Remote-IP: 76.164.224.103 User-Agent: LimeWire/5.3.6 X-Requeries: false X-Ultrapeer: True X-Degree: 32 X-Query-Routing: 0.1 X-Ultrapeer-Query-Routing: 0.1 X-Max-TTL: 3 X-Dynamic-Querying: 0.1 X-Locale-Pref: en GGEP: 0.5 Bye-Packet: 0.1 GNUTELLA/0.6 200 OK Pong-Caching: 0.1 X-Ultrapeer-Needed: false Accept-Encoding: deflate X-Requeries: false X-Locale-Pref: en X-Guess: 0.1 X-Max-TTL: 3 Vendor-Message: 0.2 X-Ultrapeer-Query-Routing: 0.1 X-Query-Routing: 0.1 Listen-IP: 76.164.224.103:15649 X-Ext-Probes: 0.1 Remote-IP: x.x.x.x GGEP: 0.5 X-Dynamic-Querying: 0.1 X-Degree: 32 User-Agent: LimeWire/4.18.7 X-Ultrapeer: True X-Try-Ultrapeers: 121.54.32.36:3279,173.19.233.80:3714,65.182.97.15:5807,115.147.231.81:9751,72.134.30.181:15810,71.59.97.180:24295,74.76.84.250:25497,96.234.62.221:32344,69.44.246.38:42254,98.199.75.23:51230 GNUTELLA/0.6 200 OK So it seems that the malware has hooked into explorer.exe and hidden its self quite well as a Norton Scan doesn't pick anything up. I have looked in Windows firewall and it shouldn't be letting this traffic through. I have had a look into the messages explorer.exe is sending in Spy++ and the only related ones I can see are socket connections etc... My question is what can I do to look into this deeper? What does malware achieve by sending p2p traffic? I know to fix the problem the easiest way is to reinstall Windows but I want to get to the bottom of it first, just out of interest.

  Read the article

• slow DNS resolution

  - by Ehsan

  I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

  Read the article

• How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

  - by kenorb

  I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

  Read the article

• Adding row to DataGridView from Thread

  - by she hates me

  Hello, I would like to add rows to DataGridView from two seperate threads. I tried something with delegates and BeginInvoke but doesn't work. Here is my row updater function which is called from another function in a thread. public delegate void GRIDLOGDelegate(string ulke, string url, string ip = ""); private void GRIDLOG(string ulke, string url, string ip = "") { if (this.InvokeRequired) { // Pass the same function to BeginInvoke, // but the call would come on the correct // thread and InvokeRequired will be false. object[] myArray = new object[3]; myArray[0] = ulke; myArray[1] = url; myArray[2] = ip; this.BeginInvoke(new GRIDLOGDelegate(GRIDLOG), new object[] { myArray }); return; } //Yeni bir satir daha olustur string[] newRow = new string[] { ulke, url, ip }; dgLogGrid.Rows.Add(newRow); }

  Read the article

• boost::asio::async_resolve Problem

  - by Moo-Juice

  Hi All, I'm in the process of constructing a Socket class that uses boost::asio. To start with, I made a connect method that took a host and a port and resolved it to an IP address. This worked well, so I decided to look in to async_resolve. However, my callback always gets an error code of 995 (using the same destination host/port as when it worked synchronously). code: Function that starts the resolution: // resolve a host asynchronously template<typename ResolveHandler> void resolveHost(const String& _host, Port _port, ResolveHandler _handler) const { boost::asio::ip::tcp::endpoint ret; boost::asio::ip::tcp::resolver::query query(_host, boost::lexical_cast<std::string>(_port)); boost::asio::ip::tcp::resolver r(m_IOService); r.async_resolve(query, _handler); }; // eo resolveHost Code that calls this function: void Socket::connect(const String& _host, Port _port) { // Anon function for resolution of the host-name and asynchronous calling of the above auto anonResolve = [this](const boost::system::error_code& _errorCode, boost::asio::ip::tcp::resolver_iterator _epIt) { // raise event onResolve.raise(SocketResolveEventArgs(*this, !_errorCode ? (*_epIt).host_name() : String(""), _errorCode)); // perform connect, calling back to anonymous function if(!_errorCode) connect(*_epIt); }; // Resolve the host calling back to anonymous function Root::instance().resolveHost(_host, _port, anonResolve); }; // eo connect The message() function of the error_code is: The I/O operation has been aborted because of either a thread exit or an application request And my main.cpp looks like this: int _tmain(int argc, _TCHAR* argv[]) { morse::Root root; TextSocket s; s.connect("somehost.com", 1234); while(true) { root.performIO(); // calls io_service::run_one() } return 0; } Thanks in advance!

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >