Search Results

Search found 31625 results on 1265 pages for 'private network'.

Page 229/1265 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

  • Can we sniff packets between 2 machines in a network from a third machine using wireshark or etherea

    - by coolcake
    I have a small network in which there are 2 electronic devices and one desktop connected using a switch. Through the desktop with Ethereal/wireshark installed on it, can I sniff the packets that are being communicated between the 2 electronic devices? I cannot install ethereal or wireshark on either of the electronic devices, but need to monitor the traffic between the 2 devices from my desktop, which is connected via the same switch.

    Read the article

  • Other than UDP Broadcast or Multicast, what other methods can I use on a WiFI network to discover co

    - by Gubatron
    I've implemented a simple ping/pong protocol to discover other computers connected to the same WiFI router. This works fine on many routers, but it seems some public routers have UDP traffic blocked or disabled. What other options do I have to discover the computers connected to the router? I was thinking of brute forcing TCP attempts (trying to open connections to all possible IPs on my subnetwork) but this would be very costly and I would have to cycle several times and still not find every machine that's recently connected to the network.

    Read the article

  • How can I check the network connection type using the Windows API?

    - by Jufkey
    How can I programmatically retrieve the current connection type (eg. LAN or Direct connection)? InternetGetConnectedState() isn't very reliable. For instance, I'm connected to a wireless network, but ConTypeRet is 18, which is INTERNET_CONNECTION_LAN & INTERNET_RAS_INSTALLED. Isn't there any way to make sure that ConTypeRet is either INTERNET_CONNECTION_LAN or INTERNET_CONNECTION_MODEM?

    Read the article

  • Insufficient Permissions Problems with MSDeploy and TFS Build 2010

    - by jdanforth
    I ran into these problems on a TFS 2010 RC setup where I wanted to deploy a web site as part of the nightly build: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (3481): Web deployment task failed.(An error occurred when reading the IIS Configuration File 'MACHINE/REDIRECTION'. The identity performing the operation was 'NT AUTHORITY\NETWORK SERVICE'.)  An error occurred when reading the IIS Configuration File 'MACHINE/REDIRECTION'. The identity performing the operation was 'NT AUTHORITY\NETWORK SERVICE'. Filename: \\?\C:\Windows\system32\inetsrv\config\redirection.config Error: Cannot read configuration file due to insufficient permissions  As you can see I’m running the build service as NETWORK SERVICE which is quite usual. The first thing I did then was to give NETWORK SERVICE read access to the whole directory where redirection.config is sitting; C:\Windows\system32\inetsrv\config. That gave me a new error: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (3481): Web deployment task failed. (Attempted to perform an unauthorized operation.) The reason for this problem was that NETWORK SERVICE didn’t have write permission to the place where I’ve told MSDeploy to put the web site physically on the disk. Once I’d given the NETWORK SERVICE the right permissions, MSDeploy completed as expected! NOTE! I’ve not had this problem with TFS 2010 RTM, so it might be just a RC issue!

    Read the article

  • Apache 2 Virtual Hosts no working on OSX 10.6

    - by matt_lethargic
    This is my first MacBook and I'm trying to get virtual hosts up and running so as it's going to be my dev machine. I've got apache/php/mysql running fine, the problem is that what ever address I go to I just get one of the virtual hosts I've setup. I can't even get to the root site anymore. I had phpmyadmin setup on http://localhost/pma but now that comes up with an error. If I take out the vhosts config file it seems to work again. I've put all my configs I can think you'll need below. ############## httpd config ############# ServerRoot "/usr" Listen 80 LoadModule authn_file_module libexec/apache2/mod_authn_file.so LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so LoadModule authn_default_module libexec/apache2/mod_authn_default.so LoadModule authz_host_module libexec/apache2/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache2/mod_authz_user.so LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so LoadModule authz_default_module libexec/apache2/mod_authz_default.so LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so LoadModule cache_module libexec/apache2/mod_cache.so LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so LoadModule dbd_module libexec/apache2/mod_dbd.so LoadModule dumpio_module libexec/apache2/mod_dumpio.so LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so LoadModule include_module libexec/apache2/mod_include.so LoadModule filter_module libexec/apache2/mod_filter.so LoadModule substitute_module libexec/apache2/mod_substitute.so LoadModule deflate_module libexec/apache2/mod_deflate.so LoadModule log_config_module libexec/apache2/mod_log_config.so LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so LoadModule logio_module libexec/apache2/mod_logio.so LoadModule env_module libexec/apache2/mod_env.so LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so LoadModule expires_module libexec/apache2/mod_expires.so LoadModule headers_module libexec/apache2/mod_headers.so LoadModule ident_module libexec/apache2/mod_ident.so LoadModule usertrack_module libexec/apache2/mod_usertrack.so LoadModule setenvif_module libexec/apache2/mod_setenvif.so LoadModule version_module libexec/apache2/mod_version.so LoadModule proxy_module libexec/apache2/mod_proxy.so LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so LoadModule ssl_module libexec/apache2/mod_ssl.so LoadModule mime_module libexec/apache2/mod_mime.so LoadModule dav_module libexec/apache2/mod_dav.so LoadModule status_module libexec/apache2/mod_status.so LoadModule autoindex_module libexec/apache2/mod_autoindex.so LoadModule asis_module libexec/apache2/mod_asis.so LoadModule info_module libexec/apache2/mod_info.so LoadModule cgi_module libexec/apache2/mod_cgi.so LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so LoadModule negotiation_module libexec/apache2/mod_negotiation.so LoadModule dir_module libexec/apache2/mod_dir.so LoadModule imagemap_module libexec/apache2/mod_imagemap.so LoadModule actions_module libexec/apache2/mod_actions.so LoadModule speling_module libexec/apache2/mod_speling.so LoadModule userdir_module libexec/apache2/mod_userdir.so LoadModule alias_module libexec/apache2/mod_alias.so LoadModule rewrite_module libexec/apache2/mod_rewrite.so LoadModule bonjour_module libexec/apache2/mod_bonjour.so LoadModule php5_module libexec/apache2/libphp5.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User _www Group _www </IfModule> </IfModule> ServerAdmin [email protected] ServerName localhost:80 DocumentRoot "/Library/WebServer/Documents" <Directory /> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <Directory "/Library/WebServer/Documents"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])"> Order allow,deny Deny from all Satisfy All </FilesMatch> <Files "rsrc"> Order allow,deny Deny from all Satisfy All </Files> <DirectoryMatch ".*\.\.namedfork"> Order allow,deny Deny from all Satisfy All </DirectoryMatch> ErrorLog "/private/var/log/apache2/error_log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "/private/var/log/apache2/access_log" common </IfModule> <IfModule alias_module> ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1" </IfModule> <Directory "/Library/WebServer/CGI-Executables"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig /private/etc/apache2/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> TraceEnable off Include /private/etc/apache2/extra/httpd-mpm.conf Include /private/etc/apache2/extra/httpd-autoindex.conf Include /private/etc/apache2/extra/httpd-languages.conf Include /private/etc/apache2/extra/httpd-userdir.conf Include /private/etc/apache2/extra/httpd-vhosts.conf Include /private/etc/apache2/extra/httpd-manual.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include /private/etc/apache2/other/*.conf ############# httpd-vhosts ################ NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/Users/matt/Workspace/farmers-arms/website/farmers_arms" ServerName dev.farmers ServerAlias www.dev.farmers ErrorLog "/private/var/log/apache2/localhost.farmers-error_log" CustomLog "/private/var/log/apache2/localhost.farmers-access_log" common <Directory "/Users/matt/Workspace/farmers-arms/website/farmers_arms"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> Hosts file 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 dev.farmers 127.0.0.1 dev.hft Help!!!

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

    - by Jeff
    Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

    Read the article

  • How to permanently add wireless interfaces with iw

    - by walli
    How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

    Read the article

  • Copying files from NAS to NAS drives

    - by user1001421
    Very simple question. I've got 2 NAS drive that are "wire" connected via a router. If I have a wireless laptop and request a large amount of data be copied from one NAS drive to the other, does the network traffic go direct from the one drive to the other, going via the wired network, or does the network traffic go via my laptop, if you see what I mean. IE. From the NAS drives wired network, to the wireless network and then back to the wired network. Is this a common bottle-neck when copying a large amount of data? And if so, is there a way to avoid it. Thanks.

    Read the article

  • Virtual Box Pen Test Lab Set Up

    - by hairyjewbear
    So i'm trying to set up a pen test lab in virtual box on my windows 7 host. I have 3 guest OS's installed: 1.) BackTrack5 2.) Centos 5 Server/Snort (My Snortbox) 3.) Win XP (Unpatched) I have 3 Ethernet adapters created IP'S 192.168.191.1 192.168.127.1 192.168.56.1 My goal is to use BackTrack5 to nmap the Win XP guest and have the snort box sniff the network. I'm new to networking and virtualization and I need help setting up my virtual network to get this to work. What should I do? All help appreciated Centos: Adapter1: NAT Adapter2: Host-only Adapter3: Internal Network Backtrack: Adapter1: Internal Network XP: Adapter1: Internal Network Also take for granted I'm on a University Network with a ridiculous firewall so I need to stay all within the host

    Read the article

  • IPV6 auto configuration not working

    - by Allan Ruin
    In Windows 7, my computer can automatically get a IPV6 global address and use IPV6 network, but in Ubuntu Natty, I can't find out how to let stateless configuration work. My network is a university campus network,so I don't need tunnels. I think if one thing can silently and successfully be accomplished in Windows, it shouldn't be impossible in linux. I tried manually editing /etc/network/interfaces and used a static IPV6 address, and I can use IPV6 this way, but I just want to use auto-configuration. I found this post: http://superuser.com/questions/33196/how-to-disable-autoconfiguration-on-ipv6-in-linux and tried sudo sysctl -w net.ipv6.conf.all.autoconf=1 sudo sysctl -w net.ipv6.conf.all.accept_ra=1 but without any luck. I got this in dmesg: root@natty-150:~# dmesg |grep IPv6 [ 26.239607] eth0: no IPv6 routers present [ 657.365194] eth0: no IPv6 routers present [ 719.101383] eth0: no IPv6 routers present [32864.604234] eth0: no IPv6 routers present [33267.619767] eth0: no IPv6 routers present [33341.507307] eth0: no IPv6 routers present I am not sure whether it matters,but then I setup a static IPv6 address (with gateway) and restart network,I ping6 ipv6.google.com and the ipv6 network is fine.This time a entry was added in dmesg [33971.214920] eth0: no IPv6 routers present So I guess the complain of no IPv6 router does not matter? Here is the ipv6 forwarding setting.But I guessed forwarding is used for radvd stuff? root@natty-150:/# cat /proc/sys/net/ipv6/conf/eth0/forwarding 0 After ajmitch mentioned forwarding setting, I added this to sysctl.conf file: net.ipv6.conf.all.autoconf = 1 net.ipv6.conf.all.accept_ra = 1 net.ipv6.conf.default.forwarding = 1 net.ipv6.conf.lo.forwarding = 1 net.ipv6.conf.eth0.forwarding = 1 and then ran sysctl -p /etc/init.d/networking restart But this still doesn't work.

    Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >