Search Results

Search found 9286 results on 372 pages for 'transfer speed'.

Page 229/372 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Is it posibble to send websocket data over 126 chars?

  - by Udi Talias

  Its seems that everybody says that it is possible to send over 126 chars of data over websocket. I looked at many websocket server examples on the web and non of them can transfer over 126 chars from client to server and from server to client. I understand that it is something with dataframes and opcodes but i never figured it out. I'm using C#. Can somebody please put some light on this subject? any code example for receiving and sending data over 126 chars will be very very thankful

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• Proccess of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We dont need a leased line as there are less than ten employees.

  Read the article

• A good free software for freeing up RAM Memory in Windows 7(64bit)

  - by Flavius Frantz

  I am looking for a good windows 7 software to free up RAM memory on my PC... i tried some ones I found on google but they were bad stuff... with viruses, spamware etc... i want a free clean professional software, if you don't know a good one thats free, please recommend a payed version. Also other tips/software to speed up my pc(on win7- 64bit) and such utilities. Also software to measure temperature would be great... If you can make a "must have" list of such software... Thank you I am a graphic designer, usually using this stack exchange for graphic design questions, now I realised there is this superuser one... nice :) [I usually have a lot of running programs, such as Photoshop, Flash, Illustrator, InDesign, running at the same time... with only 4GB of RAM memmory.. any tips to improve my PC perfomance would be great... I have a Asus K50IP Notebook]

  Read the article

• parsing a xml to get some values

  - by Joan Silverstone

  Hello, i have this xml: http://www.managerleague.com/export_data.pl?data=transfers&output=xml&hide_header=0 These are player sales from a browser game. I want to save some fields from these sales. I am fetching that xml with curl and storing on my server. Then do the following: $xml_str = file_get_contents('salespage.xml'); $xml = new SimpleXMLElement($xml_str); $items = $xml->xpath('*/transfer'); print_r($items); foreach($items as $item) { echo $item['buyerTeamname'], ': ', $item['sellerTeamname'], "\n"; } The array is empty and i cant seem to get anything from it. What am i doing wrong?

  Read the article

• How do I install Visual Studio 2010 Express somewhere besides C:?

  - by TwentyMiles

  I have a SSD as my primary (C:) drive, mainly used for quickly loading games. It's pretty small (~30 GB) so I want to keep things that don't really need a speed boost off of it. I attempted installing the Visual Studio 2010 Express beta last night, and It claimed to require 2.1 GB of space so I changed the install directory to a secondary, non-SSD drive. After this, the installer said that it would use 1.8 GB on C: and ~200 MB on the secondary drive. While this token gesture of moving 1/10 of the app to the place I told it to is cute, I really want to install everything I can to the secondary drive. Is there any way to install all of Visual Studio 2010 Express to a drive besides C:?

  Read the article

• Can I use dis-similar HW for Win2008r2 DFS-R

  - by cwheeler33

  The setup: Windows 2008R2 Ent on two machines. The roles on each server will include File Servers and DC's. The machines come from two different vendors (Dell/HP) The Dell is an Athlon and the HP is an Intel. Both have roughly the same speed CPU and 8GB of RAM. They have different Raid controllers, and more or less the same amount of disk space (roughly 6TB.) Can the servers use different types of hardware? Is there any documentation about this? The last question I have is about the network. Can DFS-R be forced to use a differen subnet from the regular network?

  Read the article

• Internet connection too slow

  - by user23950

  I now think that it is the ISP. After a full scan of my system. With super antispyware, avast, norton and spybot. Internet connection is still slow. And the truth is we have recently upgraded the connection from 512 kbps to 768. And I get a .25 Mbps at speedtest.net which is equivalent to 256 Kbps. Its not even half of the advertised speed. Is it normal for ISP's to just limit your bandwidth if you are always downloading something from the internet? Are they entitled to do this.

  Read the article

• Passing a web service an unknown number of parameters

  - by Billyhole

  I'm relatively new to utilizing web services. I'm trying to create one that will be accepting data from a ASP.Net form whose input controls are created dynamically at runtime and I don't how many control values will be getting passed. I'm thinking I'll be using jQuery's serialize() on the form to get the data, but what do I have the web service accept for a parameter? I thought maybe I could use serializeArray(), but still I don't know what type of variable to accept for the JavaScript array. Finally, I was thinking that I might need to create a simple data transfer object with the data before sending it along to the web service. I just didn't wanna go through with the DTO route if there was a much simpler way or an established best practice that I should follow. Thanks in advance for any direction you can provide and let me know I wasn't clear enough, or if you have any questions.

  Read the article

• Migrating Data to MSSQL 2008

  - by Fred Clown

  I am trying to migrate data from an Informix database to MSSQL 2008. I've got quite a lot of data to move. I've been try multiple methods to get the data over, and so far SQLBulkCopy in multiple chunks seems to be the fastest that I can find. Does anyone know of a faster means of getting the data over? I'm trying to cut down on the transfer time so that on my cut-over date I don't run out of time to do the full cut-over. Thanks.

  Read the article

• Microsoft Outlook 2007 Limit attachment size

  - by tasmanian_devil

  I have qmail server and authetication on Active Directory. All clients use Microsoft Outlook 2007 as default mail client. A have one central location and several remote location wich are connected with slow link speed connection. I have attachment limit on qmail, but i have problem when client attach file localy and send mail, attachment is been uploaded to qmail server and rejected because exceeded limit. Is it possible to limit attachment localy on MS Outlook 2007? I know that Office 2010 have attachment limitation but i think that is not working on Office 2007.

  Read the article

• Smarty dynamic error list

  - by Brainscrewer

  Im new to Smarty in combination with PHP and I really like it. Unfortunatly im running into a problem while validating fields after a $_POST has been done. I've made an array called $errors and use that to save error messages in, for example: $errors[] .= "Wrong email";. My problem is in sending the $errors array over to the template so I can use it to display the error messages. My question: How do you 'transfer' the $errors variable over to the template file so you can use it there with, for example {foreach}. I was planning on doing something like {if $hasErrors} {foreach from=errors item=error} <li>{$error}</li> {/foreach} {/if} Thanks in advance

  Read the article

• No progress bar in IE8 while executing the download using PHP

  - by user292918

  I am giving downloads to user using the PHP code below but when user downloading they are not able to see the progressbar in IE8 when clicked on save button. Please solve this. Thanks in advance. header('Content-Description: Songsbin.com - Downlaod'); header('Content-type: audio/mpeg'); header('Content-Disposition: attachment; filename='.$filename1); header('Content-Transfer-Encoding: binary'); header('Expires: 0'); header('Cache-Control: must-revalidate, post-check=0, pre-check=0'); header('Pragma: public'); header('Content-Length: '.filesize($file)); ob_clean(); flush(); readfile($file);

  Read the article

• VPC on Windows 7 very slow network

  - by Shigg

  I have a Windows 2003 virtual machine which I use for website testing. I've just installed Windows 7 and am using the new version VPC (not xp mode). When I try to copy a file - I need to copy some big databases across - I get a file copy speed of about 20k per sec. Copying from one PC to another on the real network transfers files at 13mb per second. Any ideas what may be causing this? I've turned off differential network compression on win 7. The Virtual HD is on a seperate physical drive to the OS. Running Windows 7 64 bit on a dual xeon with 16gb ram and 10,000 rpm drives. Tried installing VPC 2007 but windows blocks it running saying its not compatable. Many thanks for any ideas.

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Top causes of slow ssh logins

  - by Peter Lyons

  I'd love for one of you smart and helpful folks to post a list of common causes of delays during an ssh login. Specifically, there are 2 spots where I see a range from instantaneous to multi-second delays. Between issuing the ssh command and getting a login prompt and between entering the passphrase and having the shell load Now, specifically I'm looking at ssh details only here. Obviously network latency, speed of the hardware and OSes involved, complex login scripts, etc can cause delays. For context I ssh to a vast multitude of linux distributions and some Solaris hosts using mostly Ubuntu, CentOS, and MacOS X as my client systems. Almost all of the time, the ssh server configuration is unchanged from the OS's default settings. What ssh server configurations should I be interested in? Are there OS/kernel parameters that can be tuned? Login shell tricks? Etc?

  Read the article

• Prioritize file sharing performance in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• kmeans based on mapreduce by python

  - by user3616059

  I am going to write a mapper and reducer for the kmeans algorithm, I think the best course of action to do is putting the distance calculator in mapper and sending to reducer with the cluster id as key and coordinates of row as value. In reducer, updating the centroids would be performed. I am writing this by python. As you know, I have to use Hadoop streaming to transfer data between STDIN and STOUT. according to my knowledge, when we print (key + "\t"+value), it will be sent to reducer. Reducer will receive data and it calculates the new centroids but when we print new centroids, I think it does not send them to mapper to calculate new clusters and it just send it to STDOUT and as you know, kmeans is a iterative program. So, my questions is whether Hadoop streaming suffers of doing iterative programs and we should employ MRJOB for iterative programs?

  Read the article

• Insert takes too long, code optimization needed

  - by Pentium10

  I have some code I use to transfer a table1 values to another table2, they are sitting in different database. It's slow when I have 100.000 records. It takes forever to finish, 10+ minutes. (Windows Mobile smartphone) What can I do? cmd.CommandText = "insert into " + TableName + " select * from sync2." + TableName+""; cmd.ExecuteNonQuery(); EDIT The problem is not resolved. I am still after answers.

  Read the article

• Laptop wont start after BIOS update

  - by Maven

  I have a HP Probook 4540s i recently update its BIOS from HP's site after the installation the notebook re started but since after that there is no display i waited for an hour until the battery ran off after when i plugged in its same: Capslock is contunously blinking Fan is running faster than the usual speed i can tell this from the sound And no display i waited for more than hour for any response but no gain. Searched Internet and find out that alot people fails to update their BIOS in HP laptop i dont know why official HP sites has such updates even avaialble. Is there a way i can reset the BIOS, Hard reset, through USB of something i have another PC over which i can download anything if its required? Can anyone please help.

  Read the article

• Remote HTTP to FTP

  - by jamd12

  I am on a very slow download with the internet that I have and unfortunately I only have access to expensive and slow wireless or satelite. I have set up an FTP with a computer supplier locally who has a nice 2 Mbps speed and am trying to set up a way of adding links remotely (Hotfile, rapidshare, Fileserve, etc.) so that they can be downloaded onto the FTP and then transfered a few times a week manually onto a portable HDD. On my home PC I use Internet download manager for all my downloads. Is there a simple way that I can add links remotely to Internet Download Manager on the FTP or perhaps another solution? The OS on the FTP is Linux - I use Windows XP SP3 and Windows 7. I have not used FTP very much before so any suggestions on how best to do this would be much appreciated.

  Read the article

• How to evade writing a lot of repetitive code when mapping?

  - by JPCF

  I have a data access layer (DAL) using Entity Framework, and I want to use Automapper to communicate with upper layers. I will have to map data transfer objects (DTOs) to entities as the first operation on every method, process my inputs, then proceed to map from entities to DTOs. What would you do to skip writing this code? As an example, see this: //This is a common method in my DAL public CarDTO getCarByOwnerAndCreditStatus(OwnerDTO ownerDto, CreditDto creditDto) { //I want to automatize this code on all methods similar to this Mapper.CreateMap<OwnerDTO,Owner>(); Mapper.CreateMap<CreditDTO,Credit>(); Owner owner = Mapper.map(ownerDto); Owner credit = Mapper.map(creditDto) //... Some code processing the mapped DTOs //I want to automatize this code on all methods similar to this Mapper.CreateMap<Car,CarDTO>(); Car car = Mapper.map(ownedCar); return car; }

  Read the article

• What are those CPU control panel softwares called?

  - by Tim

  My computer is running an AMD Phenom II quad core CPU but it didn't come with the piece of software that I see people have in a lot of youtube videos. The software is kind of like the ATI catalyst control center but for the AMD processor instead. It shows things like current core temperature, clock speed, etc and I am not sure but maybe it also allows the user to make changes to those things from the control center as well. I am having a hard time finding the download for this online, especially since I don't even have the name for it.

  Read the article

• Do HTTP reverse proxies typically enable HTTP Keep-Alive on the client side of the proxied connection and not on the server side?

  - by LostInComputer

  HAProxy has the ability to enable HTTP keep-alive on the client side (client <- HAProxy) but disable it on the server side (HAProxy <- server). Some of our clients connect to our web service via satellite so the latency is ~600ms and I think that by enabling keep-alive, it will speed things up a bit. Am I right? Is this supported by Nginx? Is this a widely implemented feature in other software and hardware load balancers? What else besides HAProxy?

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >