Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 229/584 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Why You Need a Requirements-based Software Development Strategy

  As IT departments continue to drive toward more efficient operations, a requirements-based plan is crucial

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Tripple boot install with Windows MBR

  - by Andre Doria

  I have 2 hard drives, each 1TB. First drive has only Windows 7. The second drive has Kali installed on logical partitions #5 (/boot), #6 (/), #7 (/home), and #8 (swap). The bootloader is installed in /dev/sdb5. It also has Ubuntu installed on logical partitions #9 (/boot), #10 (/), #11 (/home), and #12 (swap). I want to use Windows bootloader, so I use easyBCD to configure the boot menu. EasyBCD sees my second drive partitions as #1, #2, #3,..., #8. I then add Kali selecting second drive #1 (/boot) partition, and Ubuntu selecting its #5 (/boot) partition. After this my menu has choices of Windows 7 (default), Kali, and Ubuntu. The problem is that whether I select Kali or Ubuntu I always boot Kali! Any idea on how to enable Ubuntu boot while also keep using Windows bootloader in MBR?

  Read the article

• problems with WindowsImageBackup and write protected drives

  - by Ralph Shillington

  On Windows 7 I created a System image of my computer (C: and reserved partition) onto a USB drive. No problem. I then formatted the C: and installed the OS -- no problem Now I would like use the System Image and get back some of my documents etc. But I can't get access wo the WindowsImageBackup folder on the USB drive 1) Somehow the drive is write protected --- how did that happen? How do I unprotect that drive. 2) I can't access the WindowsImageBackup folder because I suspect the ACL is out of wack with my new SID. I would add my new SID to the ACL but I can't because the drive is write protected At the moment I'm completely disconnected from my files, which I thought (and still hope) are backed up. Understandably, panic is now setting in.

  Read the article

• Impossible to install Ubuntu 10.10 dual boot with Windows 7 on new Acer desktop computer

  - by Don Myers

  My brother has a brand new Acer Desktop with Windows 7. I have done many installs (40+) of Ubuntu starting with 8.10, and have never run into this. I've spent three hours trying to do a dual boot install of 10.10. When you get to the place where you normally would choose to install as a dual boot or overwrite the existing information on the hard drive, that block is just blank. Nothing. No choices even to do a manual partition setup. If you try to go on you get the message "No root file system is defined. Please correct this from the partitioning menu." but there is nothing in the partitioning menu. I tried a good 10.04 disc also. Same thing happens with it. I ran a gparted live cd, and it shows the hard drive as sda with 3 partitions on the original. sda1 is a small partition called PQService. sda2 is another small partition called System Reserved, and GParted says it is the boot partition. sda3 is the main partation with the operating system (Windows 7) and all of the empty space. There is a little unallocated space at the very beginning and very end of the hard drive. If I go to places in the Live CD, it shows a 640 gb hard disk called Acer, but it also shows a 640 gb hard disk called system reserved. They are the same disk. There is just one hard drive. If you click properties in the System Reserved 640 gb, it shows all information as unknown. I had to change the boot order in the bios in order to run the live cd. The hard drive instead of being listed as such is listed as Raid:Raid Ready. Something the way this computer is set up is preventing Ubuntu from being able to identify the hard drive partitions at all to do an install, even if you were not doing a dual boot and just wanted to overwrite Windows. Is this a bug that needs reported? This is a major problem for me and my brother, but also for Ubuntu if new users want to Ubuntu and find they cannot install it.

  Read the article

• Dell 3721 Wifi problem Ubuntu 13.04

  - by Sebastian

  I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

  Read the article

• Easy Transfer from a dead computer

  - by Nathan DeWitt

  I had a computer that electrocuted me and the company sent me a new one. The hard drive from the old computer works fine and is in my new computer. I would like to transfer my files from the old drive to the new one, preferably using Easy Transfer (old & new computers were Win7). When I go through the Easy Transfer wizard, it assumes my old computer is running and that I can run a process to backup all my data to a single file. However, in my case I have the system drive in my new computer and want to pull the data off it. I would like to avoid rebooting the old computer, to avoid damage to myself or my data. I would like to avoid booting into the old system drive, as my new hardware is significantly different and I imagine I'll run into some missing hardware issues. What's the easiest way to get my data off this drive?

  Read the article

• HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

  - by Chris Hoffman

  You’ve probably heard that you need to overwrite a drive multiple times to make the data unrecoverable. Many disk-wiping utilities offer multiple-pass wipes. This is an urban legend – you only need to wipe a drive once. Wiping refers to overwriting a drive with all 0’s, all 1’s, or random data. It’s important to wipe a drive once before disposing of it to make your data unrecoverable, but additional wipes offer a false sense of security. Image Credit: Norlando Pobre on Flickr HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

  Read the article

• What Are the Windows A: and B: Drives Used For?

  - by Jason Fitzpatrick

  The C: drive is the default installation location for Windows, if you have a CD/DVD drive on your machine it’s likely the D: drive, and any additional drives fall in line after that. What about the A: and B: drives? Image by Michael Holley. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. HTG Explains: What is DNS? How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU

  Read the article

• Windows 2008 as home file server and more

  - by Christian W

  I currently have a freenas-unit as a NAS, and a Win2k8R2-unit as server. However I would like to consolidate these to units in one. What I really like about the freenas-unit is the ZFS filesystem. And the only reason I care about the ZFS filesystem is the easy way I can grow an existing filesystem just by inserting a new drive. How would this work in Win2k8? If I setup my unit with a separate drive as C: and a 1TB drive as D:. The D: would then be segmented into d:\Videos d:\Music d:\Pictures. When everything gets close to filling the storage-drive, I would like to expand the storage, but I wouldn't want to have E:\Videos or d:\Videos2 (using the NTFS folder mount thingy). I still want all my Videos to reside in D:\Videos and I want the OS to decide which drive it's going to be stored on... Some kind of on-the-fly jbod expansion :) Is this at all possible in Windows 2008?

  Read the article

• Prevent Ultrabay HDD from ejecting on sleep

  - by Bryce Evans

  I have a lenovo T430s thinkpad with a small SSD primary drive and 500gb ultrabay drive. When I put the computer to sleep and then return, I get the message titled "problem ejecting < drive name " "Windows can't stop your 'Generic volume' device because a program is still using it." This pop up is very annoying every time every time I use the computer. I don't want to disable write caching [D:Hardware[drive]policiesquick removal] because I want best performance and never remove the drive. Any ways to avoid this pop up?

  Read the article

• User account shows two Downloads folders

  - by Chris Lieb

  I have my user account on my D drive and junction'd to the C:\users folder. I accidentally moved my profile Downloads folder (C:\users\me\Downloads) and then moved it back to its path on the D drive (C:\me\Downloads). After doing this, the directory tree for my user profile lists two Downloads directories, one located at C:\users\me and one at D:\me. I tried deleting the directory from the D drive, then restoring it from the Recycle Bin to the proper location on the C drive (actually the D drive, accessed through the junction), but it gave me the two Downloads directories again. Is there some way to fix this so that the only listing is for the C:\users\me\Downloads directory, like it was to begin with?

  Read the article

• How can I join non-consecutive partitions on internal hard disk?

  - by Andy

  I recently installed a new, larger hard disk in my PC at work (the office wouldn't spring for an upgrade for my 75GB disk, so I brought my own 2TB disk in from home). I managed to clone the original drive using CloneZilla, but now I have a 75GB partition on my new drive, followed by a 300MB partition, followed by a 1794.65GB of unallocated space. What I want is to add the unallocated space to the 75GB partition, thereby maximizing my C: drive. However, when I right-click on the C: partition, the option to "Extend Volume" is grayed out. How do I get all my fancy new extra space to be part of my C: drive? I also tried booting with GParted, but I get the same deal - cannot adjust the C: drive because there's no contiguous space.

  Read the article

• 12.04 making BCM4313 card work with aircrack-ng?

  - by Charles Forest

  I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

  Read the article

• MySQL Daemon failed to start

  - by T. Brian Jones

  THE SETUP I'm running Linux CentOS on an Amazon EC2 instance. The MySQL data files are on an EBS Drive mounted at /data/ ( symlink - /var/lib/mysql /data/mysql ). Everything works fine in this setup. THE PROBLEM I'm trying to move everything from this EBS drive to a new drive. I umounted the /data/ drive, and mounted it at /data2/. Then I mounted the new drive at /data/ and copied everything over to it from /data2/. Everything on the system works great, except MySQL. Every time I try to start the MySQL daemon ( /etc/init.d/mysqld start ) I get a MySQL Daemon failed to start error.

  Read the article

• How can I check whether a volume is mounted where it is supposed to be using Python?

  - by Ben Hymers

  I've got a backup script written in Python which creates the destination directory before copying the source directory to it. I've configured it to use /external-backup as the destination, which is where I mount an external hard drive. I just ran the script without the hard drive being turned on (or being mounted) and found that it was working as normal, albeit making a backup on the internal hard drive, which has nowhere near enough space to back itself up. My question is: how can I check whether the volume is mounted in the right place before writing to it? If I can detect that /external-backup isn't mounted, I can prevent writing to it. The bonus question is why was this allowed, when the OS knows that directory is supposed to live on another device, and what would happen to the data (on the internal hard drive) should I later mount that device (the external hard drive)? Clearly there can't be two copies on different devices at the same path! Thanks in advance!

  Read the article

• windows partition not booting

  - by bumbling fool

  Using clonezilla, I cloned a win7 installation from the first partition on one drive to the first partition on a second larger drive and then installed ubuntu into the second partition (same configuration as the original drive, just maverick instead of karmic). ubuntu detected the win7 partition properly and added it to the grub menu. However, when I choose the win7 option in grub, I just get a black screen and blinking cursor :( Suggestions please?!?

  Read the article

• Error while trying to dual boot Ubuntu alongside Windows 8

  - by Brian

  I recently purchased a new Toshiba Ultrabook that comes pre-installed with Windows 8. I'm trying to dual boot 12.10 with it and I have run into a problem with the installer. When I get to the page to pick the partitions I get this: No drives are listed and the only thing in that device drop down is /dev/sda. If I click Install Now or +/-/change I get an "Ubuntu has stopped working" error message. I'm trying to install off a 12.10 64-bit USB drive in UEFI mode, and I have tried it with secure boot both enabled and disabled with the same results. The hard drive set up is as follows: 500 GB main drive windows recovery (primary) EFI boot section (primary) Windows' partion (280 GB I believe) (primary) unallocated space I created for Ubuntu partition (200ish GB) another Windows recovery partition (primary) 12 GB solid state drive all unallocated space Could it be a problem with the number of primary partitions? I think I read somewhere about a max of 4.

  Read the article

• Home Server restore fails cannot find boot device

  - by Tim Heuer

  I am using Windows Home Server to backup my PCs. I recently had a hard drive failure on one of my WHS connected PCs and obtained an identical sized/speed drive for my laptop. I used the latest home server restore CD and did the restore. It said it completed successfully. Upon reboot, it says 'cannot find boot device' and lists all my drives (hard drive, cd, network book) indicating no valid operating system was found. I boot using the Win7 repair disk and while it doesn't see the operating system, it sees the drive and if I go into a command prompt, I can see all my data on the drive. My laptop is Windows 7 64-bit Ultimate. I've tried most everything I can think of. I'm a technical user (software developer) so I'm pretty aware of how things work (or should). I don't feel like I'm missing a simple step here.

  Read the article

• Windows 7 not booting from Ubuntu 12.10 boot menu

  - by Raj Inevitable

  Am having windows 7 in one hard drive. I installed Ubuntu in second hard drive. Am configured BIOS to boot second hard drive first (Ubuntu OS). and then i updated grub, so its shows windows 7 in the boot list. I can boot in to ubuntu, but i can't boot into windows 7, its shows error A disk read error occured Press Ctrl+Alt+Del to restart . then am configured BIOS again to load windows 7 first, it shows windows 7 and ubuntu in the boot list, windows 7 is working, but i can't boot into ubuntu.. Help to solve this problem.. i want dual boot from any one of the drive...

  Read the article

• 7 Ways To Free Up Hard Disk Space On Windows

  - by Chris Hoffman

  Hard drives are getting larger and larger, but somehow they always seem to fill up. This is even more true if you’re using a solid-state drive (SSD), which offers much less hard drive space than traditional mechanical hard drives. If you’re hurting for hard drive space, these tricks should help you free up space for important files and programs by removing the unimportant junk cluttering up your hard disk. Image Credit: Jason Bache on Flickr 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• Partition resize

  - by borax12

  I have a dual boot system with 1.C:drive with windows 227 GB 2.E: drive in windows 185 GB 3.Ext4 Ubuntu - 38 GB 4.Linux swap - 4 GB I want to decrease the space from E: drive from 185 GB to say about 160 GB and assign the 25 GB achieved from the resizing to the ext4 partition so that my ubuntu home has more space I was told that do a resize in gparted could cause some boot problems,please tell me a safe way to achieve this resizing

  Read the article

• Where are Wireless Profiles stored in Ubuntu

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Configuring BitLocker on existing Windows Server 2008

  - by neildeadman

  On our file server, we want to enable BitLocker so that we can encrypt a single drive and I know that we have to also encrypt the drive the system is installed on. In my tests with VMs, I have to create a partition on the same disk as Windows is installed either before I install Windows or after (I can use the BitLocker Drive Preparation Tool). This tool shrinks the C: drive to make way for a 1.5GB partition. I'm a little concerned about doing this with a live system so wanted to see if it was possible to get BitLocker to use a partition on another drive?

  Read the article

• Development environment for embedded system

  - by Howard Lee Harkness

  I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >