Search Results

Search found 59084 results on 2364 pages for 'local system'.

Page 230/2364 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

  • How to determine the port numbers for peripheral devices?

    - by smwikipedia
    I know that peripheral devices such as a hard driver, a floppy driver, etc are controlled by reading/writing certain control registers on their device controllers. I am wondering about the following questions: Is it true that when these peripheral devices are plugged onto the computer, the addresses(port numbers) of their control registers are thus determined by how they are attached to the address bus (i.e. the hard-wiring rules, not any soft things)? Who makes the scheme of the port number assignment? If I was given a naked computer(with no operating system and with many peripheral devices), how could I figure out the port number assignment so I can use them to control peripheral deveices. At last and as usual, thanks for your patience and reply. 8^)

    Read the article

  • How to determine the port numbers for peripherals devices?

    - by smwikipedia
    I know that peripheral devices such as a hard driver, a floppy driver, etc are controlled by reading/writing certain control registers on their device controllers. I am wondering about the following questions: Is it true that when these peripheral devices are plugged onto the computer, the addresses(port numbers) of their control registers are thus determined by how they are attached to the address bus (i.e. the hard-wiring)? Who makes the scheme of the port number assignment? If I was given a naked computer(with no operating system and with many peripheral devices), how could I figure out the port number assignment so I can use them to control peripheral deveices.

    Read the article

  • Get File Size of Modified Image Before Writing to Disk

    - by Otaku
    I'm doing a conversion from .jpg to .png in System.Drawing and one thing that I've found is that this conversion tends to make the resulting converted .png much larger than the .jpg original. Sometimes more than 10x larger after converting to .png. Given that seems to always be the case (unless you know of a way around this), is there any way to determine the file size of that .png before it is saved to disk? For example, maybe write it to a stream first and then get that stream size? How would I go about doing this?

    Read the article

  • What is the difference between IEditableObject and IRevertibleChangeTracking?

    - by open-collar
    What is the difference between IEditableObject and IRevertibleChangeTracking (both from the System.ComponentModel namespace)? It looks as if the first supports explicit transaction whilst the second is more implicit - but the net result is the same. How should I go about implementing this in code? At the moment I do nothing in BeginEdit and call RejectChanges and AcceptChanges in EndEdit and CancelEdit respectively. My problem is that this will also accept the changes made prior to the BeginEdit. Is that really what MS wanted or am I trying to implement two mutually exclusive interfaces?

    Read the article

  • How to bring coordination between file system and database?

    - by Lock up
    I am working on a online file management project. We are storing references on the database (sql server) and files data on the on file system. We are facing a problem of coordination between file system and database while we are uploading a file and also in case of deleting a file. First we create a reference in the database or store files on file system. The problem is that if I create a reference in the database first and then store a file on file system, but while storing files on the file system any type of error occur, then the reference for that file is created in the database but no file data exist on the file system. Please give me some solution how to deal with such situation. I am badly in need of it. This case happens also while we deleting a file?

    Read the article

  • Disk IO Performance Limitations based on numbers of folders/files

    - by Josh
    I have an application where users are allowed to upload images to the server. Our Web Server is a windows 2008 server and we have a site (images.mysite.com) that points to a shared drive on a unix box. The code used to do the uploading is C# 3.5. The system currently supports a workflow where after a threshold is met a new subfolder can be generated. The question we have is how many files and/or subfolders can you have in a single folder before there is a degredation in performance - in serving the images up through IIS 7 and reading/writing through code?

    Read the article

  • Subversion: How to make local changes to a file *never* check in, but have it sync with remote anyway?

    - by Niels Heidenreich
    I have a file with local changes that should never sync back to the repository because it's for my local installation only. But if that same file is changed in the repo, I want those changes to update my local copy, anyway. At the moment, the file in question always shows up in the list of changes when I want to check-in my changes, and I have to manually exclude it from the check-in. How do I make it so that I can just update, with the above restriction in place? Thanks :)

    Read the article

  • how to bring coordination btween file system and databse?

    - by Lock up
    i am working on a online file management project.In which we are storing references on the database(sql server) and files data on the on file system;.In which we are facing a problem of coordination between file system and database while we are uploading a file and also in case of deleting a file that first we create a reference in the data base or store files on file system;;the problem is that if create a reference in the database first and then storing a file on file system.bur while storing files on the file system any type of error occur.then reference for that file is created in the database but no file data on the file system;; please give me som esolution how to deal with such situation;;i am badly in need of it;; This case is also while we deleting a file?

    Read the article

  • How to prevent illegal file and folder name creation in Windows Server 2003 or Windows Server 2008

    - by Joel Thibeault
    Preventing illegal file and Folder name creation on a Windows 2003/2008 file server is the goal. We know from articles like http://stackoverflow.com/questions/62771/how-check-if-given-string-is-legal-allowed-file-name-under-windows that for some reason the file system allows creation of illegal file/folder chacters and paths that exceed the limitations of Windows. I need the following question answered: How to remove cabability to create file or folder creation in NTFS that contains invalid characters? Can you remove the POSIX subsystem from Windows to fix this issue? How does disabling 8.3 dos name creation factor into this issue? Will any of these fixes prevent linux clients from creating windows compliant files?

    Read the article

  • Writing an OS for Motorola 68K processor. Can I emulate it? And can I test-drive OS development?

    - by ulver
    Next term, I'll need to write a basic operating system for Motorola 68K processor as part of a course lab material. Is there a Linux emulator of a basic hardware setup with that processor? So my partners and I can debug quicker on our computers instead of physically restarting the board and stuff. Is it possible to apply test-driven development technique to OS development? Code will be mostly assembly and C. What will be the main difficulties with trying to test-drive this? Any advice on how to do it?

    Read the article

  • Allocate from buffer in C

    - by Grimless
    I am building a simple particle system and want to use a single array buffer of structs to manage my particles. That said, I can't find a C function that allows me to malloc() and free() from an arbitrary buffer. Here is some pseudocode to show my intent: Particle* particles = (Particle*) malloc( sizeof(Particle) * numParticles ); Particle* firstParticle = <buffer_alloc>( particles ); initialize_particle( firstParticle ); // ... Some more stuff if (firstParticle->life < 0) <buffer_free>( firstParticle ); // @ program's end free(particles); Where <buffer_alloc> and <buffer_free> are functions that allocate and free memory chunks from arbitrary pointers (possibly with additional metadata such as buffer length, etc.). Do such functions exist and/or is there a better way to do this? Thank you!

    Read the article

  • Master repository and local repositories in the same machine.

    - by bala
    I am new to Git. I have created a master repository in a linux server. The same server is going to be used by 5 groups of 3 users each. I want to create one local repository for each group. And the group members in turn should create one local repository for each of them, play with the contents and committ the modificatons to the group's local repository. How should i go about doing this?

    Read the article

  • HTML5 Local Storage of audio element source - is it possible?

    - by andrewdotcom
    Hi stackoverflow experts I've been experimenting with the audio and local storage features of html5 of late and have run into something that has me stumped. I'd like to be able to cache or store the source of the audio element locally to enable speedier and offline playback. The problem is I can't see how this is possible with the current implementation. I have tried the following using webkit: Creating a manifest file to set up local caching but the audio file appears not to be a cacheable item maybe due to the way it is stream or something I have also attempted to use javascript to put an audio object into local storage but the size of the mp3 makes this impossible due to memory issues (i think). I have tried to use the data uri and base64 to use the html as a audio transport that can be cached but again the filesize makes this prohibitive. Also the audio element does not seem to like this in webkit (works fine in mozilla) I have tried several methods of putting the data into the local database store. Again suffering the same issues as the other cases. I'd love to hear any other ideas anyone may have as to how I could achieve my goal of offline playback using caching/local storage in webkit.

    Read the article

  • How do you run a .bat file from PHP?

    - by undefined
    Can anyone tell me how to execute a .bat file from a PHP script? I have tried - exec("C:[path to file]"); system("C:[path to file]"); nothing is working. Ive checked the PHP manuals and googled around but cant find a good answer. Anyone know where im going wrong? I'm running windows 2003 server and have successfully manually ran the .bat file and it does what i need it to, I just need to be able to launch it programatically. thanks

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • How to copy remote machines text to local machines clipboard through SSH?

    - by recluze
    I work on a remote machine through ssh. I have a very large text file there (approx. 500 lines) which I usually need to modify, then copy the contents of that file and paste it in my local browser. The way I usually do this is cat filename and then select/copy the ssh output. That takes a lot of time. I was wondering if there is a utility that will put the remote file's contents in my local clipboard.

    Read the article

  • Why can't I access my own web server from my local network?

    - by frenetic
    I have a web server in my home network and I'm using ZoneEdit for dynamic DNS. It's accessible perfectly to everyone outside of my local network, but since I switched to a Gateway 2Wire DSL modem/router I'm unable to use the domain to access the server from my network. I can access it via a local IP or by putting it in my Windows hosts file but this is annoying to do on every computer and for every subdomain. Any idea how I can fix this? Thanks!

    Read the article

  • Why can't I access my own web server from my local network?

    - by frenetic
    I have a web server in my home network and I'm using ZoneEdit for dynamic DNS. It's accessible perfectly to everyone outside of my local network, but since I switched to a Gateway 2Wire DSL modem/router I'm unable to use the domain to access the server from my network. I can access it via a local IP or by putting it in my Windows hosts file but this is annoying to do on every computer and for every subdomain. Any idea how I can fix this? Thanks!

    Read the article

  • Can the users can apply Windows update without local administrator rights?

    - by AAA-Super
    My users are running on windows XP 32bit. normally WSUS automatically download and notify them to select which update want to install in the past they were in local administrator rights,now I reduce them to user rights so now they can't see the yellow notification said updated are available. Is there a way to give users permission to see the yellow notification and they can select updates by hand without local admin rights or power users? Any advice would be appreciated Thanks

    Read the article

  • How to Mount remote disc as local in Windows 7 and Windows 2003?

    - by Robert
    Is it possible to mount remote file system (on Windows 2003 server) as local disk in Windows 7? I have Windows 2003 server with software RAID and some shares. On another computer with Windows 7 I have software which can access only data form local or USB disks. This solution doesn't work because program doesn't see files in folder: Mount Remote CIFS/SMB Share as a Folder not a Drive Letter Everything is the same LAN.

    Read the article

  • How to access my local server on my VirtualBox virtual machine?

    - by marcgg
    Here's my setup: I have a local server running on my machine (Mac OS, Snow Leopard). I can access it via my browser by doing localhost:3000 I have a virtual machine using Virtual Box running a windows XP. If I try to access using localhost:3000, it fails. Same thing if I use the ip of the Mac machine. The virtual machine has access to the internet. How can I access my local server in my virtual machine?

    Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >