Search Results

Search found 118203 results on 4729 pages for 'web server controls'.

Page 231/4729 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • Setting up kerberos for SQL Server 2008 R2 not taking effect

    - by dotnetdev
    I am trying to configure Kerberos for my SQL Server (the database engine domain account). I have executed the following command: SETSPN -A MSSQLSvc/MyDBServer:1433 MyDomain\SQLServerService Replacing MyDBServer with the FQDN of the server and replacing MyDomain\SQLServerService with the name of my account. I then ran the query: SELECT s.session_id , c.connect_time , s.login_time , s.login_name , c.protocol_type , c.auth_scheme , s.HOST_NAME , s.program_name FROM sys.dm_exec_sessions s JOIN sys.dm_exec_connections c ON s.session_id = c.session_id This returns NTLM. So it's not Kerberos. What am I mising? The delegation tab is available for the account, so the spn bit worked perfectly fine. Is it not required to set some settings in the delegation tab? I've seen this in the case of setting kerberos for Sharepoint 2010 (which I intend to setup). Thanks

    Read the article

  • Distributing Files using a Group Policy on Windows Server 2003

    - by tonedeath
    A piece of software that we use at our office has recently moved to a new licensing system. This means that from now on a new set of license key files will need to be distributed to each of our 25 client installations every year. All of the clients run XP and are part of an AD domain controlled by a Windows 2003 DC. I'm already using group policies to deploy software updates. I gather that this is possible with Group Policy Preferences in Server 2008. I'm just looking for a good method using Server 2003. The same set of files need copying to each client. I also have them hosted on a network share accessible by each client. I'm more of a *nix person, so I'm not particularly up on scripting in a Windows environment.

    Read the article

  • Parralelization in Microsoft SQL Server 2008 R2

    - by stan31337
    We have a specific accounting and production software, called 1C, which uses single user connection to the MS SQL 2008 R2 database. And there are about 500 users connecting to 1C server to perform their tasks. 1C and SQL 2008 are on separate servers. How to configure MS SQL 2008 R2 to effectively use parallelization in this configuration? We have 24 cores, and only one is loaded at 100% at MS SQL 2008 R2 server. We have already configured MS SQL max parallelizm from this MSDN article: http://msdn.microsoft.com/en-us/library/ms181007(v=sql.105).aspx Thank you!

    Read the article

  • Turn old rack server into a telephone server

    - by Jake Elsley
    I have an old server lying around and I am thinking of using it as an internal telephone server. Its main use would be to set up a 1 to 1 telephone system that could be used internally to connect to different users in different offices. I have looked at software like Asterisk, but it seems that this is mainly for external telephone systems. Is this possible to do with Asterisk (or other software) or is this not possible without involving a VOIP company?

    Read the article

  • Monit unable to start sidekiq on Opsworks server

    - by webdevtom
    I have used AWS Opsworks to create some servers. I have Sidekiq running as part of my Rails application. When I deploy Sidekiq restarts nicely. I am configuring Monit to watch the pid and start and stop Sidekiq if there are any issues. However when Monit trys to start Sidekiq I see that the wrong Ruby looks to be used. Oct 17 13:52:43 daitengu sidekiq: /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/definition.rb:361:in `validate_ruby!': Your Ruby version is 1.8.7, but your Gemfile specified 1.9.3 (Bundler::RubyVersionMismatch) Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler.rb:116:in `setup' Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/setup.rb:17 When I run the command from the cli Sidekiq launches correctly. $> cd /srv/www/myapp/current && RAILS_ENV=production nohup /usr/local/bin/bundle exec sidekiq -C config/sidekiq.yml >> /srv/www/myapp/shared/log/sidekiq.log 2>&1 & $> ps -aef |grep sidekiq root 1236 1235 8 20:54 pts/0 00:00:50 sidekiq 2.11.0 myapp [0 of 25 busy] My sidekiq.monitrc file check process unicorn with pidfile /srv/www/myapp/shared/pids/unicorn.pid start program = "/bin/bash -c 'cd /srv/www/myapp/current && /usr/local/bin/bundle exec unicorn_rails --env production --daemonize -c /srv/www/myapp/shared/config/unicorn.conf'" stop program = "/bin/bash -c 'kill -QUIT `cat /srv/www/myapp/shared/pids/unicorn.pid`'"

    Read the article

  • .NET Web Service Security

    - by Kyle Rozendo
    Hi All, I am looking for some guidelines that one should stick to with .NET Web Services. What does one need to check for/do when it comes to Web Services? Are there any guidelines specifically for .NET Web Services? Thanks, Kyle

    Read the article

  • Unable to connect SQL Server instance from Visual Studio 2008 SP1 on Vista x64

    - by Shimmy
    Hi folks! I installed on a Vista x64 machine Visual Studio 2008 SP1 (with integrated SQL from the installation package) and when I try to add an MDF file to a project or to the App_Data when working with web, I get the following message: Connections to SQL Server Files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component or download from the URl: http:go.microsoft.com/fwlink/?linkID=49251. Just to make sure: SQL 2005 express is installed and I connect to it via SSMS. Update: I am 90% sure that this is a Microsoft bug with x64 machines.

    Read the article

  • displaying web pages over web views in collection view using cocoa bindings

    - by Miraaj
    Hi all, I tried sample example given at this link - Collection View Programming Guide It is simple and it worked. Considering it as a reference I tried a simple application which will show a collection view of web views with some web page displayed over each web view. The model class has two properties: NSString *pageName, and NSURL *pageURL. I then followed each and every step written in tutorial above with required modifications but I was caught in the step - How to bind web view to collection view item? In binding tab it shows three possibilities : Editable, Hidden, Tool tip but none of these is working. Can anyone suggest me way to accomplish my requirement? Thanks, Miraaj

    Read the article

  • Ubuntu Server 12.04 LTS on Hyper-V 2012

    - by user137533
    I have the following scenario: Hyper-V 2012 server core installation. On top of this i created a virtual machine on which i tried installing Ubuntu Server 12.04 which should not have any compatibility issues according to what Microsoft and Ubuntu are saying (although it is not officially supported). I start, run the installation and everything is ok, no problems detecting the network device or the hard drive (unlike debian which didn't even detect the hard drive). Once the installation is complete it asks me to reboot, it unmounts the "dvd drive" and reboots. Once it tries to start again i get the following error: Boot failure. Reboot and Select proper Boot device or Insert Boot Media in the selected Boot device. It seems to not be booting up from the virtual hard drive. The hard drive is set up in SCSI mode, nothing mounted on the IDE controller (no iso image or anything else. Does anyone have any ideas on what i can do to solve this?

    Read the article

  • PPTP network for server backend LAN?

    - by Sebastian Hoitz
    Here is our problem: We have several webservers, which should be reached from public. The database servers that store the data for the web apps on those webservers though shall not have a public IP. So, since I want to be able to connect to the SQL servers using ssh for example, and those servers need to talk with each other, I had this idea: Internet | ------------------ | | Webserver 1 Webserver 2 Database Server | | | -------------- vLAN -------------- | PPTP | Workstation (my PC) My idea was that I can connect to the vLAN using PPTP so that I have access to all servers in that LAN, but the database server remains unvisible to the public. Is this infrastructure a good idea?

    Read the article

  • Install Windows Server 2008 Core on a Dell Optiplex 790

    - by Alex Marshall
    Does anybody have experience installing Windows Server 2008 Core on a Dell Optiplex 790? When I connect to the machine with the Hyper-V Manager Administrator snap-in, and try to create and run a virtual machine, I get the error "The Virtual Machine could not be started because the hypervisor is not running". I've disabled the Execute Disable functionality in the BIOS as was requried for other Dell models, but no matter what combination of security and virtualization settings I use on the machine, I can't get this working. EDIT: I've installed Windows Server 2008 Core on a Dell Optiplex 790, and I'm trying to install and setup a guest VM on the Hypervisor EDIT 2: The Hyper-V role is installed and configured, without any errors in the event log. Hardware-assisted virtualization is also enabled.

    Read the article

  • Event SRV error 2012 in Windows Server 2008 R2

    - by Natkeeran
    Error Warning "Event SRV error 2012 in Windows Server 2008 R2" is being logged with increasing frequency. NIC drivers were updated recently. There are some drops in the switches. This is the error: SRV 2012 While transmitting or receiving data, the server encountered a network error. Occassional errors are expected, but large amounts of these indicate a possible error in your network configuration. The error status code is contained within the returned data (formatted as Words) and may point you towards the problem.

    Read the article

  • I can't create New Project on Visual Web Developer 2008 Express

    - by aximili
    I can't create New Project on my Visual Web Developer 2008 Express with SP1. (I can only create New Website) My colleague has the exact same version (if you go to Help - About) but they can create both New Website and New Project. I am trying to do this tutorial on MVC that also says that you can do it on Web Developer Express (http://www.asp.net/learn/mvc/tutorial-21-cs.aspx) How do you enable New Project on Visual Web Developer 2008 Express?

    Read the article

  • Connecting to a WSE 3.0 Web Service From a WCF Client

    - by Dave
    I'm having difficulty connecting to a 3rd party WSE 3.0 web service from a WCF client. I have implemented the custom binding class as indicated in this KB article: http://msdn.microsoft.com/en-us/library/ms734745.aspx The problem seems to have to do with the security assertion used by the web service - UsernameOverTransport. When I attempt to call a method, I get the following exception: System.InvalidOperationException: The 'WseHttpBinding'.'[namespace]' binding for the 'MyWebServiceSoap'.'[namespace]' contract is configured with an authentication mode that requires transport level integrity and confidentiality. However the transport cannot provide integrity and confidentiality.. It is expecting a username, password, and CN number. In the example code supplied to us by the vendor, these credentials are bundled in a Microsoft.Web.Services3.Security.Tokens.UsernameToken. Here's the example supplied by the vendor: MyWebServiceWse proxy = new MyWebServiceWse(); UsernameToken token = new UsernameToken("Username", "password", PasswordOption.SendPlainText); token.Id = "<supplied CN Number>"; proxy.SetClientCredential(token); proxy.SetPolicy(new Policy(new UsernameOverTransportAssertion(), new RequireActionHeaderAssertion())); MyObject mo = proxy.MyMethod(); This works fine from a 2.0 app w/ WSE 3.0 installed. Here is a snippet of the code from my WCF client: EndpointAddress address = new EndpointAddress(new Uri("<web service uri here>")); WseHttpBinding binding = new WseHttpBinding(); // This is the custom binding I created per the MS KB article binding.SecurityAssertion = WseSecurityAssertion.UsernameOverTransport; binding.EstablishSecurityContext = false; // Not sure about the value of either of these next two binding.RequireDerivedKeys = true; binding.MessageProtectionOrder = MessageProtectionOrder.SignBeforeEncrypt; MembershipServiceSoapClient proxy = new MembershipServiceSoapClient(binding, address); // This is where I believe the problem lies – I can’t seem to properly setup the security credentials the web service is expecting proxy.ClientCredentials.UserName.UserName = "username"; proxy.ClientCredentials.UserName.Password = "pwd"; // How do I supply the CN number? MyObject mo = proxy.MyMethod(); // this throws the exception I've scoured the web looking for an answer to this question. Some sources get me close (like the MS KB article), but I can't seem to get over the hump. Can someone help me out?

    Read the article

  • Passing parameters from android to .Net Web Service

    - by benjamin schultz
    I have an Android application that uses kSoap in connecting to my web services. This particular one is passing in a string value as a parameter, then my web service will use that parameter to query my database via a stored procedure. Problem is, I know how to pass the parameter from android, but I don't know how to retrieve it in my .Net(vb) web service and use it. Anyone have any code examples or a link to a tutorial to help me out? Thanks!

    Read the article

  • Notification of low DHCP pool in split scope setup

    - by JJBladester
    In Windows Server 2008 R2, it is possible to read the Event Viewer for EventID 1020 which is an indication that the DHCP pool is running low on addresses. What if I have two DHCP servers in my domain that use an 80/20 split scope to take a /24 pool of DHCP-allocated IP addresses and split it amongst the two servers according to this Technet Article? In this case, since the scope is split, how can I tell if the total DHCP pool, which is split amongst the two DHCP servers, is beginning to run low on address space?

    Read the article

  • storing user info/pass in web.config authentication

    - by Tomaszewski
    Hello, I am trying to write a simple internal app with some simple authentication. I'm also trying to make this quick and learn about the forms authentication via web.config. So i have my authentication working if I hard code my 'user name' and 'password' into C# code and do a simple conditional. However, I'm having a tough time storing the a user/pass to be checked against in the web.config file. The MSDN manual says to put this into the web.config: <authentication mode="Forms"> <forms loginUrl="login.aspx"> <credentials passwordFormat="SHA1"> <user name="user1" password="27CE4CA7FBF00685AF2F617E3F5BBCAFF7B7403C" /> <user name="user2" password="D108F80936F78DFDD333141EBC985B0233A30C7A" /> <user name="user3" password="7BDB09781A3F23885CD43177C0508B375CB1B7E9"/> </credentials> </forms> </authentication> However, the minute I add 'credentials' into the 'authentication' section, I get this error: Server Error in '/' Application. Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized element 'credentials'. Source Error: Line 44: <authentication mode="Forms"> Line 45: <forms loginUrl="login.aspx" /> Line 46: <credentials> Line 47: Line 48: </credentials> Source File: C:\inetpub\wwwroot\asp\projects\passwordCatalog\passwordCatalog\web.config Line: 46 So my question is, how and where would I add the following in the web.config file? <credentials passwordFormat="SHA1"> <user name="johndoe" password="mypass123" /> </credentials>

    Read the article

  • SQL Server Snapshot Replication Subscriber (Editable or Read-Only)

    - by NateReid
    I need to create a copy of my SQL 2008 R2 Enterprise database and have it located on the same server as the original. I will be using this second copy of the database as the target of a mostly read-only website. I understand that if I create this copy of the database using snapshot replication that all data changes in the subscriber database will be overwriten in the event of the next replication. The web application will try to write to this database to record login attempts, etc and will fail if its source database is read-only. In my case I do not need to keep these auditing records and they can therefore be overwriten each time a new snapshot is applied. My question is whether SQL Server forces the subcriber database to be read-only and is there any way around this? Thank you, Nate

    Read the article

  • Using Subversion with SQL Server Management Studio

    - by Mike
    I am a member of a team with 3 developers. We have started using Redmine here for project management and issue tracking and LOVE it. I have seen elsewhere how nicely Redmine can work when a back-end repository is set up for a project. There is nice integration all around. This shop is currently .Net and SQL Server 2005. I am thinking about recommending a move to Subversion for our VCS (so that we can integrate with Redmine). I have seen a product called VisualSVN which will make it possible to use Visual Studio with Subversion, so that covers .Net. But the other big question is if it is possible to configure SQL Server Management Studio to somehow use Subversion for its VCS. Has anyone done this? This shop is currently using Sourcegear Fortress.

    Read the article

  • How to setup a 1 way trust, Windows Server 2008 R2

    - by MichaelOz
    I am on my home network and connect to workplace via a VPN. I have a DC on my home network (DC1 , domain = home). How can I setup a 1 way trust, so that I am able to run executables, such as SQL Management Studio using RunAs - then type in credentials for work domain? First question is, will a 1 way trust solve this, and can I set this up without bothering a network admin at workplace (assuming I have a domain account with enough permissions on work domain) If yes - any good step by step guide to setup 1 way trust? Server is Windows Server 2008 R2. As mentioned its DC running DNS Role too. Thanks in advance

    Read the article

  • How to connect ftp server outside lan?

    - by srisar
    hi all , im setting up home ftp server, so i can share some files with my friends outside my lan. I am using filezilla server and everything configured. http://www.canyouseeme.org/ even see my port 21 as opend, but when i connect through fit client or through web browser, its saying "530 User saravana access denied." how can i solve this problem, i checked the user name and password, everything is good, but i didnt sent any passive mode, (i didnt know how to set), if that is causing the trouble can anyone help me, bu the way i can connect locally through localhost.

    Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >