Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 232/1008 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• Dell N7110 i7 overheats and doesn't boot when anything is plugged into the USB3 port

  - by Kostyantyn

  When i plug in any devices (mouse, keyboard) into usb 3.0 system dell n7110 overheats and fan goes crazy with terrible noise. So i'm using 1 usb 2.0 slot now with a usb hub. It doesn't solve the problem completely but system stays at a low fan rate for a longer time. I've tried to lower CPU frequency, but in my case (DELL INSPIRON N7110 i7 on Linux 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux) CPU was pretty cool (51 C) and still the same horrible fan noise. Looks like there is no such problems with ubuntu 10.04 (but there're some other problems). Ubuntu even doesn't boot if anything is plugged into usb 3.0

  Read the article

• Micromax 3G mobile internet modem not being detected

  - by arjith

  I have Micromax 3G modem, and i inserted it in the USB port, but it is not being detected by Ubuntu 12.04, that i'm using from a Live USB. I tried creating a mobile internet connection, however, eventhough i created it, there is no option to connect. I had previously used 11.10 Ubuntu, and it had automatically detected the datastick modem and asked me to create a connection. On typing lsusb in the terminal it gives the following: **Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:5307 Hewlett-Packard Bus 001 Device 008: ID 1c9e:9605 OMEGA TECHNOLOGY Bus 001 Device 006: ID 5986:0364 Acer, Inc tried to insert the modem before boot, with negative results **

  Read the article

• Parallel Installation of Ubuntu, Wubi and Windows 7?

  - by Aufwind

  I have Windows 7 installed on a Notebook. Because I wanted to experiment with Ubutnu without loosing my Windows 7 configuration I installed the Wubi Version of Ubuntu inside of Windows 7. Since things seam to work out well with Ubuntu and my harddisk space is very limited, I want to make Ubuntu my only operating system on this machine. So my question is: Is it possible, to install Ubuntu 11.04 additionally to my actual configuration (Wubi and Windows 7)? And if things turned out well with the native installation of Ubuntu, too, to delete Wubi and Windows 7 from my system afterwards? Why I am asking this is simply, that I am afraid, that if I just format my machine and made the whole harddisk available for the fresh Ubuntu installation, it could be possible, that it turns out, that one thing or an other would not work properly, like it did in Wubi. (Possible Network, VPN, and Firewall@work issues) In this case I'd like the possibility to switch back.

  Read the article

• using egrep to find missing @ in log

  - by jols

  I am using the following command to find log entries that are the result of a log in to the email server: egrep '_login[^ ]' /var/log/exim_mainlog That works fine to find entries that contain content like this: P=esmtpa A=courier_login:[email protected] S=1573 id=f1cd08396,... But what I need to do is to change my grep statement, so that it finds single word logins that do not use the @ sign, like so: P=esmtpa A=courier_login:name S=1573 id=f1cd08396,... Where the log in before was "[email protected]", but in the second log entry, the log in used was only "name". Is this possible using grep or egrep, perhaps in some kind of a compound statement? Thanks much.

  Read the article

• Jupiter Changes Display when using volume key bindings

  - by user87797

  I recently downloaded jupiter on ubuntu 12.04 ASUS U36JC and I noticed that my display would switch from clone to exterior to clone everytime that I used the keys that control the volume. Hit "function volume down" and the screen goes blank, hit "function volume up" and the display come back. This only happens when I am running jupiter and I assume there is a key binding issue, but I don't know how to fix it. No options other than the regular ones show up in the keyboard settings under system tools.

  Read the article

• How long does boot repair take?

  - by Emre

  Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

  Read the article

• Ubuntu 12.04 booting into busybox after update

  - by Victor Alejandro Martinez

  Every time the system updates the kernel from 3.5.0-24 to 3.5.0-34 I get dropped into a busybox prompt at boot, but I can boot just fine using the previous kernel. I've tried all I know. I did a fsck.ext3 -f /dev/sdb2 using the alternate install CD. I've used boot-repair but to avail, I've checked for bad blocks but there are none. Should I purge the new kernel and use the old one instead? This is the output from boot-repair the first time, no purge. http://paste.ubuntu.com/5809230/

  Read the article

• How to resolve "dpkg: error processing /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb"?

  - by raz7588

  Update Manager will not update although I have over 100 updates to do I get a error message like this: installArchives() failed: Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 189751 files and directories currently installed.) Preparing to replace python-problem-report 2.0.1-0ubuntu7 (using .../python-problem-report_2.0.1-0ubuntu9_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-problem-report_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace python-apport 2.0.1-0ubuntu7 (using .../python-apport_2.0.1-0ubuntu9_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace apport 2.0.1-0ubuntu7 (using .../apport_2.0.1-0ubuntu9_all.deb) ... apport stop/waiting Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/apport_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already apport start/running Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace gnome-orca 3.4.1-0ubuntu0.1 (using .../gnome-orca_3.4.2-0ubuntu0.1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/gnome-orca_3.4.2-0ubuntu0.1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace python-piston-mini-client 0.7.2-0ubuntu1 (using .../python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace oneconf 0.2.8 (using .../oneconf_0.2.8.1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/oneconf_0.2.8.1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace software-center 5.2.2 (using .../software-center_5.2.2.2_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/software-center_5.2.2.2_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace libglade2-0 1:2.6.4-1ubuntu1 (using .../libglade2-0_1%%3a2.6.4-1ubuntu1.1_amd64.deb) ... Unpacking replacement libglade2-0 ... Preparing to replace libv4l-0 0.8.6-1ubuntu1 (using .../libv4l-0_0.8.6-1ubuntu2_amd64.deb) ... De-configuring libv4l-0:i386 ... Unpacking replacement libv4l-0 ... Preparing to replace libv4l-0:i386 0.8.6-1ubuntu1 (using .../libv4l-0_0.8.6-1ubuntu2_i386.deb) ... Unpacking replacement libv4l-0:i386 ... Preparing to replace libv4lconvert0:i386 0.8.6-1ubuntu1 (using .../libv4lconvert0_0.8.6-1ubuntu2_i386.deb) ... De-configuring libv4lconvert0 ... Unpacking replacement libv4lconvert0:i386 ... Preparing to replace libv4lconvert0 0.8.6-1ubuntu1 (using .../libv4lconvert0_0.8.6-1ubuntu2_amd64.deb) ... Unpacking replacement libv4lconvert0 ... Errors were encountered while processing: /var/cache/apt/archives/python-problem-report_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/apport_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/gnome-orca_3.4.2-0ubuntu0.1_all.deb /var/cache/apt/archives/python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb /var/cache/apt/archives/oneconf_0.2.8.1_all.deb /var/cache/apt/archives/software-center_5.2.2.2_all.deb Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up libglade2-0 (1:2.6.4-1ubuntu1.1) ... dpkg: error processing gnome-orca (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. dpkg: error processing python-problem-report (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Setting up libv4lconvert0 (0.8.6-1ubuntu2) ... Setting up libv4lconvert0:i386 (0.8.6-1ubuntu2) ... dpkg: error processing python-piston-mini-client (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Setting up libv4l-0 (0.8.6-1ubuntu2) ... Setting up libv4l-0:i386 (0.8.6-1ubuntu2) ... dpkg: dependency problems prevent configuration of python-apport: python-apport depends on python-problem-report (>= 0.94); however: Package python-problem-report is not configured yet. dpkg: error processing python-apport (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of software-center: software-center depends on python-piston-mini-client (>= 0.1+bzr29); however: Package python-piston-mini-client is not configured yet. dpkg: error processing software-center (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of oneconf: oneconf depends on python-piston-mini-client (>= 0.3+bzr32-0ubuntu1); however: Package python-piston-mini-client is not configured yet. dpkg: error processing oneconf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of apport: apport depends on python-apport (>= 2.0.1-0ubuntu7); however: Package python-apport is not configured yet. dpkg: error processing apport (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin ... ldconfig deferred processing now taking place This has been going on for two weeks now and I cannot get any updates. Any help would be great.

  Read the article

• Installation-Allocate drive space/Boot Loader

  - by user10134

  When I try to install Ubuntu 10.10 from the official livedisc I got in the mail, when I get to the "Allocate Disk Space" step I cannot get it to work. I shrank my win7 partition so I have unallocated space, then I tried using the space while it is formatted in NTFS, but the partitions will not show up in the box. /dev/sda is selected under boot loader, and I can't select anything else, but the partition box is blank so when I click "install ubuntu" it just says: "No root file system is defined. Please correct this from the partitioning menu." -I am trying to dual-boot win7 and ubuntu, but I was never asked in the install process whether I would like to install just ubuntu or dual-boot?

  Read the article

• Grub boot problems with older ubuntu

  - by denk doink

  This is my 1st post here and there are 2 problems that are inter-related. I'm not much of a Linux system person... the computer is a dedicated linux box without any windoze. 1) running 9.10 and had a boot failure last week. looks like a file was deleted or corrupted. i was unable to get it to work. realizing it was a boot issue, i took the CD and installed 9.04 to co-exist with 9.10 on the disc. 9.04 was put into a 2.5 gb ext3 partition. i was able to boot into 9.10 from grub menu selection. 9.04 was now the default in grub menu. 2) i want to remove/delete/purge 9.04 completely from my system and "clean up" the stuff so that the machine boots straight to 9.10 (no grub menu). how are these accomplished in a "safe" manner? thank you. -denk

  Read the article

• website not available outside

  - by Keshav Nair

  I am new to ubuntu server and i have installed ubuntu server on a vm and installed LAMP etc but my problem is that my website is not visible outside. i have port triggering and added port 21,22 and 80. i really don't know what am doing, i am totally lost! I have a dynamic ip but i can access the server through 192.168.25.1 no matter how many times i restart the modem and from my public ip. I get redirected to my router settings what should i do??

  Read the article

• Ubuntu 12.04 OpenCL with Intel and Radeon?

  - by Steve

  I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

  Read the article

• Recovering from 'grub rescue>' crash

  - by DocSalvage

  I did a dumb thing... I forgot that Ubuntu 10.04 (Lucid) switched to Grub2 which puts a ton of *.mod files (kernel modules) in /boot/grub. I thought they were soundtrack files put there erroneously and moved them. Needless to say, the next reboot was traumatic. I was presented with something I had no memory of ever seeing... a 'grub rescue' prompt. With the help of how-to-fix-error-unknown-filesystem-grub-rescue however, I was able to recover... Discovered that Grub Rescue does not have 'cd', 'cp' or any other filesystem commands except its own variation of 'ls'. So first I had to find the partition with the /boot directory containing vmlinuz... and other boot image files... (failed attempts not shown) grub rescue> ls (hd0,4) (hd0,3) (hd0,2) (hd0,1) grub rescue> ls (hd0,2)/boot ... grub ... initrd.img-2.6.32-33-generic ... vmlinuz-2.6.32-33-generic Then manually boot from 'grub rescue' prompt (no command history either!)... grub rescue> set root=(hd0,2)/boot grub rescue> insmod linux grub rescue> linux (hd0,2)/boot/vmlinuz-2.6.32-33-generic grub rescue> initrd (hd0,2)/boot/initrd.img-2.6.32-33-generic grub rescue> boot This boots and crashes to the BusyBox prompt which DOES have some rudimentary filesystem commnds. Then I moved the *.mod files back to the /boot/grub directory... busybox> cd /boot busybox> mv mod/* grub busybox> reboot The reboot was successful but that was a lot of work. Is there an easier way?

  Read the article

• VLC unable to open MRL

  - by faizal

  I am trying to play a VCD using : /usr/bin/vlc vcd:// But i get the error below : VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) [0x14ec1c8] main interface error: no suitable interface module [0x1486118] main libvlc error: interface "globalhotkeys,none" initialization failed [0x1486118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [0x7f815c0009b8] main input error: open of `vcd://' failed [0x7f815c0009b8] main input error: Your input can't be opened [0x7f815c0009b8] main input error: VLC is unable to open the MRL 'vcd://'. Check the log for details. Any way to resolve this ?

  Read the article

• error of pdf2djvu: "Bogus memory allocation size"

  - by Tim

  I am using pdf2djvu to convert a pdf file into a djvu file, but got this error while trying to convert to either bundled or indirect multi-page djvu file: $ pdf2djvu 1.pdf -o 1.djvu 1.pdf: - page #1 -> #1 Bogus memory allocation size $ pdf2djvu 1.pdf -i 1.djvu 1.pdf: - page #1 -> #1 Bogus memory allocation size I was wondering what is wrong here and how I shall fix the problem? You can suggest another application other than pdf2djvu. My pdf file can be downloaded from here , in case that you may wonder what is special about it. Thanks and regards!

  Read the article

• Compiz effects aren't working properly!

  - by Naveen

  On Ubuntu 12.04, the Compiz visual effects appears to be glitchy. I see a "window flash", after rotating the "Desktop Cube". I've used the "Magic Lamp effect" when minimizing windows, but the window content, minimizes faster, delaying the window border to minimize. "So the border and the window content gets apart, like in the picture below". I've tried updating Compiz, but no luck. How to fix this problem? Will Compiz work properly in XFCE? This didn't happen in Lucid Lynx. I appriciate any help!

  Read the article

• I dont know my password and wont let me change it via GRUB

  - by josh

  I recently turned off the login password so i would not have to enter my password every time I turn the system on. But now when I try to update or download anything it asks me for my password so I enter my old password and it keeps telling me its wrong when I have only ever had the 1 password and its a simple 1 so I would not forget and considering I have only had UBUNTU installed for two days it is really frustrating. I have also tried resetting it via the GRUB but it wont let me type the new password. Please help ASAP.

  Read the article

• Reinstalling GRUB2 on Ubuntu 12.04 | Windows 7 dual boot after Windows reinstallation

  - by Shasteriskt

  So I had the perfect Ubuntu 12 / Windows 7 dual boot set-up -- until I had to re-install Windows 7. After the deed, GRUB2 was of course wiped out, thus my Ubuntu installation is rendered inaccessible. I have tried these steps: mount /dev/sda5 /mnt #This is where my Ubuntu installation resides. mount /dev/sda1 /mnt/boot #Indicated by the `*` under `Boot` when doing `fdisk -l` mount --bind /mnt/proc /proc mount --bind /mnt/sys /sys mount --bind /mnt/dev /dev sudo chroot mnt sudo grub-install /dev/sda sudo update-grub #Then unmounted everything... Unfortunately, only my Windows 7 has been detected and the Ubuntu entries never appeared in the prompt. Only my Windows 7 installation (/dev/sda1) is available in the GRUB2 menu. How can I rectify this?

  Read the article

• Desktop background won't change until restart

  - by Ben

  I'm new to Ubuntu and indeed Linux systems. I have 11.04 installed on my laptop. Here's the problem. When i select a picture for the desktop background, it says that Desktop Background has been changed but the changes do not apply right away. It is only after I have restarted the system that the changes will appear. This did not happen before. When i first started using this OS a few months ago the changes applied immediately. So what have i done that made this start acting wonky. Thank you for any help.

  Read the article

• How to install ubuntu-12.10-desktop along with windows 8 64bit

  - by Priyesh

  I have hp pavilion 15 n204tx, which came with pre-installed Ubuntu OS. I formatted it and installed Win 8 64bit. and created 3 + 1(system reserve) partition. 50GB for win8 50GB for Ubuntu remaining for my files and other is system reserve. But now i need ubuntu-12.10-desktop also, along with win8. Is there is a way to install ubuntu-12.10-desktop, without affecting my files and win8 on second 50GB partition. Is the installation method is same as of other similar questions here. Please answer and i don't know anything about commands posted on other answers here, i just started to learn UNIX. So kindly tell where and how to use commands, if any Thank you

  Read the article

• How to allocate unallocated space of hard disk in Ubuntu 12.4 after installation

  - by user171351

  How to allocate unallocated space of hard disk in Ubuntu 12.04 after installation. My system is running fine with Windows and Linux. I am using Windows rarely and for my official purpose I am using Ubuntu 12.04. I forgot to allocate around 100 GB of space while installing. Now 100 GB is free in HDD and its not usable. How can I allocate that free space as another volume without formatting the current OS?

  Read the article

• Linux kernel regression on power usage

  - by dago

  Webupd8 reported this power management fix for the 2.6.38 Linux kernel regression: Add the following to the boot grub line "pcie_aspm=force" My question - how does this suggested fix differ from this hint from powertop: Suggestion: Enable Device Power Management by pressing the P key, which execute the following action: find /sys/devices/pci* -path "*power/control" -exec bash -c "echo auto > '{}'" \;

  Read the article

• How to revert back to older xorg?

  - by wouter205

  Since the last update of ubuntu 12.04, the system won't boot into gui anymore. It states that it was unable to load the graphics drivers and gives me 4 options, these are: run in low graphics mode for 1 session reconfigure graphics troubleshoot the error exit to console login whichever option I choose, it doesn't solve anything. For instance, when i choose to reconfigure graphics and then switch to vesa drivers, the screen goes back to the option list. So i configured xorg.conf to vesa myself, and i see in the update history that ubuntu updated xserver-xorg-core and xserver-common whereas i blocked these updates in synaptic since i'm aware that updating these files caused troubles with my particular video card (radeon hd6800). So my solution is probably to revert these files to the older (working) versions. How can I do this please (in particular xserver-xorg-core since i think this is the main cause of my problem). thanks! output of ls /etc/X11 -app-defaults xorg.conf Xreset -cursors xorg.conf-backup-120529144709 Xreset.d -default-display-manager xorg.conf.fglrx-0 -Xresources -fonts xorg.conf.fglrx-1 Xsession -rgb.txt xorg.conf.fglrx-2 Xsession.d -X xorg.conf.original-0 -Xsession.options -xinit xorg.conf.original-1 -Xwrapper.config -xkb xorg.conf.vesa Output of sudo aptitude show xserver-xorg-core | grep Versie (read: Version in Flemish) Versie: 2:1.11.4-0ubuntu10.2

  Read the article

• How to setup ATI Mobility Radeon HD 4650?

  - by Thi An

  I'm currently using Ubuntu 12.04 64bit. After installing ATI/AMD proprietary FGLRX graphics drivers via Additional Drivers, I checked the status of my VGA card using lspci -v. Here's the output: 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0456 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon As mentioned in the title, my VGA card is 1GB and yet my computer only recognizes 256MB. My question is: "How to make my computer fully recognize the capacity of my ATI Mobility Radeon HD 4650 (1GB)?"

  Read the article

• Java Not Recognized As Default Application

  - by John

  I just installed java according to this article, and 'java -version' displays java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) 'update-alternatives --config java' returns this: There are 2 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/bin/gij-4.6 1046 auto mode 1 /usr/bin/gij-4.6 1046 manual mode * 2 /usr/local/java/jdk1.7.0_07/bin/java 1 manual mode Press enter to keep the current choice[*], or type selection number: with update-alternatives --config javac (or javaws) returning similarly. however java isn't listed in the default applications menu when I click on a .jar file and go to "open with application". I tried to install java this way, and on the update-alternatives part of the command returned me: /etc/alternatives/[java,javac,javaws] is dangling, it will be updated with best choice I just confirmed that I can use java, as 'java -jar file.jar' does work. Just figured that I'd mention it, don't know why I didn't before, but when I right click on a .jar file, java 7 run-time isn't even listed there, it seems that the file-manager isn't recognizing it as a program, but it is there, and it does work...

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >