Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 232/318 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• HP Omni 27-1027c AIO...Upgradeable?

  - by Bobo

  I just bought an HP Omni 27 1057c from Sams Club. I like it a lot, but I want more performance. discovered that the integrated Intel HD 2500 graphics is almost useless for most games. I found a website that says it can be upgraded at http://www.pcmag.com/article2/0,2817,2398314,00.asp. The computers specs can be found at Sams Club website or at HP website HP Product Specs. So what do you think? Can I upgrade Motherboard and Video Card?

  Read the article

• internet access options in remote area? (read: no comcast,qwest, etc)

  - by freedrull

  Currently I am living in a fairly "remote" area, in the countryside, and cable internet access through the typical companies like comcast and qwest is just not available here. I've been trying to research other options for fast internet access. There are some small cable companies but they currently do not offer broadband access here. I thought about maybe buying a 3g phone with a data plan and doing some sort of tethering, or perhaps getting an android phone and using it as a wireless AP. This would of course depend on 3g being available here. The only other thing I can think of is some sort of satellite internet service, or doing something crazy like adapting wifi over am radio. Anyone have any ideas, at all, short of moving somewhere else?

  Read the article

• Windows 7 port Forwarding Issue

  - by Elliot

  I can't get port forwarding to work now that I am using windows 7 (64-bit). I am using a wireless connection (no wired connection available). I have the ports forwarded (IP has been double checked, router settings are confirmed), there is an exception for all of the programs in question in windows firewall, and in the resource monitor windows lists the ports as available, not restricted, and yet when I either use a specific program (ie utorrent, DC++, Command & Conquer 3) or check using firefox, the port reads as closed. How do I get the port forwarding to work?

  Read the article

• Help changing MAC address in Windows 7 [closed]

  - by Niphoet

  Possible Duplicate: Change MAC Address I need to change the MAC address of my wireless adapter in Windows 7 (Ultimate RTM). I used to do this in XP both directly in the registry editor and with a .REG file I wrote. I have used each of these methods in Windows 7, as well as a few tools I found that are supposed to do this. Every time I change it, I disable and re-enable the network adapter in control panel, but upon running ipconfig /all it still shows my old MAC address. Any help? By the way, I do have Administrative Rights and UAC turned off.

  Read the article

• Connecting to Aerohive APs from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• DSL connection dropping when starting game

  - by bootoo

  New connection set up last week - have called tech support, signal fine, sending out tech guy tomorrow - however i cant make sense of this using Vista, 2wire connection 6mb ATT conn, wireless, i can browse website, stream video from my PC wirelessly to my xbox, watch Hulu in high res, connection seems fine I load up World of Warcraft, i select Enter World and without fail my 2wire modem 'DSL' light goes red, my internet light goes out, im no longer connected, then after 10 or 15 seconds it works again, but game has kicked me Noticed the same thing on opening or closing Utorrent as well No other phones/devices plugged into the phone jacks in the apartment - why would joining a game cause my DSL to drop? i can only guess it throws a bunch of information to the server when i hit 'enter world' and that causes an issue that shuts my connection down or my router hates me - all help appreciated

  Read the article

• Why every change in Asus UX50v causes screen resolution get lost?

  - by Kaveh Shahbazian

  Why every change in Asus UX50v causes screen resolution get lost? Installing a new application, connecting to another wireless network, change some settings, ... causes this problem. For example after installing an application, UX50v needs to restart. And when it got restarted, resolution would be set to 640x480(or 600x800) and Hibernate and Sleep options are disappeared from shutdown menu! (I have other problems with this Asus UX50v crap too - like I can't update windows 7 because it crashes on Asus UX50v crap - but this one is absolutely ridiculous and stupid!)

  Read the article

• Can't connect to a share.

  - by AngryHacker

  Hello, I have a laptop with a Windows XP Tablet Edition installed. I have several users setup on the laptop (mostly me and my kids). When I try to connect to its administrative share via \DadLaptop\c$ from a Windows 2000 Professional machine, it prompts me for a user name and password. However, after I enter it, it always tells me "incorrect password or unknown username". As a test I setup another share, called "test" and tried to connect to that. It worked fine, didn't even ask me for a password, just connected to it and that's that. All the networking is wireless. I am connecting with an admin account (admin on the target computer). What am I missing? Why can't I connect to an administrative share?

  Read the article

• HFS for Windows by Paragon BSOD

  - by texmex5

  Installed HFS for Windows 7 yesterday. Did a reboot. Copied some files from my internal drive to external hfs drive. Did another reboot and rebooted to Mac. Mac worked fine. Then yesterday the battery went dead on my mac and the computer switched off. This morning tried to boot into windows but got a BSOD as soon as I moved my mouse in the login screen. BSOD refeers to an error with service HFSPLUS.SYS Now when I try to boot into mac (pressing alt while restarding) the mac drive isn's shown and I can only boot into Windows 7 Safe Mode. Cannot uninstall HFS for Windows the uninstaller in control panel says: "THE WINDOWS INSTALLER SERVICE COULD NOT BE ACCESSED. THIS CAN OCCUR WHEN WINDOWS INSTALLER IS NOT CORRECTLY INSTALLED". SETUP: Intel Core 2 Duo, P8600 @ 2.40GHZ, 4GB RAM, WINDOWS 7 ULTIMATE 32 BIT

  Read the article

• How do I recover from a Linux CentOS 4.6 Operating System Crash

  - by Greg Omebije

  Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

  Read the article

• configure pppoe on wrt54gl(openwrt)

  - by sunny

  Hi, I have home DSL connection from my ISP with a beetel modem at my end. I want to make my network wireless, so i bought a linksys wrt54gl and installed open-wrt on it. My ISP provides dynamic IP's with me connecting via pppoe. My question is how do I configure openwrt to work with this. Please suggest what option should I go with, or any other you recommend. DSL cable--Beetel Modem-- Wrt54gl in bridge mode with beetel modem doing the pppoe and having a DHCP server. DSL cable--Wrt54gl with wrt54gl handling the pppoe. Is option 2 possible, can I have a setup without bringing the beetel modem in the picture at all?

  Read the article

• Block P2P traffic on a Linksys router WRT54G with tomato firmware

  - by Kami

  Hi, I'm running a small wireless network (6 to 10 users) on a Lynksys WRT54G with tomato firmware sharing an internet connection. I don't want the users to download files with bittorrent (mainly used) and other p2p apps. I've also found some solutions about lowering p2p traffic priority using QoS. I really need to BAN p2p traffic. Does anyone know how to setup some rules to deny that kind of traffic ? I've tried to setup an Access Restriction Rule: But it's not working at all ...

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• Is a "failed" RAID 5 disk really no good?

  - by GregH

  This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

  Read the article

• Securing data sent to an unencrypted WiFi AP

  - by David Parunakian

  The business plan of a project I'm involved in assumes selling certain WiFi-enabled devices to end users. All these devices originally have an unencrypted connection and a standard SSID. The problem is that although the user can connect to it and set both a new SSID and a WPA passphrase, these are being sent to the AP in plain text and thus can be intercepted by anyone nearby with a sniffer. What's the best solution to this problem, and why? Initially set up an encrypted wireless network at the device and supply the user with a printed passphrase Buy an SSL certificate for the AP's default IP address or local domain name (the APs aren't supposed to work as a router and have a captive portal & dnsmasq installed, so all of them can pretend to be myunit.example.com, as far as I understand) Something different Thank you.

  Read the article

• HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

  - by joelarson

  I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

  Read the article

• Disk Redundancy across different server

  - by Mascarpone

  I have 3 servers, all with the same specs: Intel CPU 8 GB RAM Linux or BSD Single 2TB desktop SATA with more than 10K Hours of operation, with only less than 300 GB Used My provider cannot install a second hard drive, but can guarantee me that the drive will be replaced immediately in case of failure, with another equally crappy drive. The likelihood of drive failure is high, and since I can't use RAID, I was thinking about keeping a back up of each machine on all the other machines, so that there are always 2 copies on 2 different drives, plus the original. I would synchronize the drives every hour, with rsync, to guarantee some sort of redundancy, since bandwidth inside the DC is free, so it would be much cheaper than offsite backup. (A daily offiste backup is kept anyhow). What do you think? Any suggestion?

  Read the article

• Increase application performance on Amazon AWS

  - by Honus Wagner

  I've got a client with an MVC v1 (.NET) application running on a micro instance. On this instance, I've got .NET, IIS 7.5, and MS SQL Server 2008 running to handle the application. The client has reported that it is taking nearly 10 seconds to process each request. Even loading the initial login page takes about that long, then logging in takes that long, etc etc. The currently running instance specs are as follows: 615 MB RAM Intel Xenon CPU E5430 @ 2.66GHz 2.78 GHz 64-Bit Is the memory availability the issue? or is it the processing power? I forsee two options: Change to a larget instance Set up a 2-tier architecture with two micro instances Which of these will give the application better performance? Thanks in advance.

  Read the article

• UEC - Can the Cluster Controller and Storage Controller be seperate systems?

  - by Jeremy Hajek

  My department is implementing an Ubuntu Enterprise Cloud. I have done the testing and am quite comfortable with the 4 pieces, CC/SC, CLC, WS, NC. Looking at various documents below it appears the the Storage Controller and Cluster Controller (eucalyptus-sc and eucalyptus-cc) are always installed on the same system. My question is this: can I install the storage controller and the cluster controller on separate systems? http://open.eucalyptus.com/wiki/EucalyptusAdvanced_v2.0 the picture indicates that cc and sc are two different machines http://www.canonical.com/sites/default/files/active/Whitepaper-UbuntuEnterpriseCloudArchitecture-v1.pdf P.10 1st paragraph uses the word "machine(s)" http://software.intel.com/file/31966 P. 8 indicates the same separate architecture BUT... https://help.ubuntu.com/community/UEC/PackageInstallSeparate indicates below that the SC and CC are to be on the same system.

  Read the article

• Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

  - by Bob

  I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• Can I use a Mac Mini as a web server and database server? What are the pros and cons?

  - by Christopher Altman

  We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

  Read the article

• I found two usb sticks on the ground. Now what?

  - by Stefano Borini

  As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

  Read the article

• How share internet connection between two laptops

  - by danielgratzz

  I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

  Read the article

• HDD vanished after wakeup from standby

  - by Sam

  In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >