Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 235/402 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

  • Ubunti 12.10 wake on lan not working with Realtek 8139

    - by f.cipriani
    My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

    Read the article

  • Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

    - by Mikl
    My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

    Read the article

  • Shotwell issues in 11.10

    - by John Speed
    I had used Shotwell happily previously then updated to Natty last week. Despite Shotwell showing on the tool bar on screen, when clicked, nothing happened, and it ignored my SD card when loaded. I read all sorts of remedies and tried everything to no avail. When I next turned on the laptop, Ocelot was available so with nothing to loose, I upgraded again. Still no Shotwell. Tried all the new fixes and now atleast I have the icon pictures but nothing behind it. When I ran the command to load the log file, Shotwell loaded and all my photos are present. Exited programme, and now nothing. Can anyone tell me where I have gone wrong please.

    Read the article

  • Grub-Efi wrong resolution

    - by Nikki Kononov
    My question, as it comes from the title, related to grub, but it's a different thing. I re-installed Windows 7 and Ubuntu 12.10 in UEFI mode (before that I was using normal BIOS) and everything went perfectly fine. Both systems load as they should but there is one thing that keeps bothering me. The problem is before I installed both systems in UEFI I used to boot in both system using common grub (non-uefi) and resolution in this grub was correct (which is 1366x768). Right now with grub-efi I have wrong resolution (which is seems to be 640x480). So my question is can can I safely set grub-resolution using grub config files or issue is related to something else? (for instance graphics card). I am using Ubuntu 12.10 Intel HD 3000 + Nvidia GT 540M Optimus (I am using bumblebee) Kernel 3.5.0-19-generic all updates installed! I also added ubuntu x-swat ppa for drivers. Thank you for your help!

    Read the article

  • Software requirements specification, please help!

    - by Nicholas Chow
    For a school project, I had to create a SRS for a "fictional" application. However they did not show us what it exactly entails, and were very vague with explanations. The SRS asked of us has to have at least 5 functional requirements, 5 non functional requirements and 1 constraint. Now I have tried my best to make one however I think there are still a lot of mistakes in it. Could you all please look at it and provide me with some feedback on which parts I can improve or just tell me which parts are plain out wrong and how to make it better? (The project has a maximum of 12 pages so it is a bit long, I will post it below. FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers.

    Read the article

  • Hard-copy approaches to time tracking

    - by STW
    I have a problem: I suck at tracking time-on-task for specific feature/defects/etc while coding them. I tend to jump between tasks a fair bit (partly due to the inherit juggling required by professional software development, partly due to my personal tendancy to focus on the code itself and not the business process around code). My personal preference is for a hard-copy system. Even with gabillions of pixels of real-estate on-screen I find it terribly distracting to keep a tracking window convienient; either I forget about it or it gets in my ways. So, looking for suggestions on time-tracking. My only requirement is a simple system to track start/stop times per task. I've considered going as far as buying a time-clock and giving each ticket a dedicated time-card. When I start working on it, punch-in; when done working, punch-out.

    Read the article

  • Windows Azure SDK 1.2 Available - .NET 4.0 Support

    - by Shaun
    The Windows Azure team had just announced the release of the latest version of its tools and SDK (v1.2) at the TechED 2010 New Orleans. You can download it here. The biggest new feature/improvement of this version of the SDK would be Visual Studio 2010 RTM and .NET 4.0 support. It gives us the facilities to build our azure-based applications on top of .NET 3.5 and 4.0 as well. So the guys who is working on, like me, or is going to be working on .NET 4 would better to have this SDK installed I think. Also there are some other information about the envolution of the Windows Azure at this TechED session you can find here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • XFCE ~ Volume Hot Keys Not Working

    - by fleamour
    Just installed vanilla Xubuntu 12.04 LTS & updated on a ThinkPad E325 with Conexant CX20671 sound card. I notice volume hot keys work under Xubuntu DE but not XFCE. You can summon sound settings under Xubuntu but they are missing under XFCE. Also sound bar is greyed out though sound will still function. Muting/decreasing/increasing volume with hot keys has no effect. Is there a workaround? If not what package would I report a bug against?

    Read the article

  • What kind of screen has the best image quality for reading/programming?

    - by EpsilonVector
    I'm thinking about buying a new laptop, and while I bought my original one oblivious to the fact that there could be different quality screens out there, after seeing the screen on my sister's netbook I realized that I might have to be cautious with my next purchase. Granted, I did not confirm that the reason my sister's screen looks the way it does is due to the screen itself and not color scheme/graphics card, but I know very little about the different screen technologies and how they differ in image quality and therefore can't really tell if wondering about it even makes sense or not. So what I'm asking is: should I be worried about screen quality? And if so, what technologies should I be looking for? How do they differ and which are the best ones? What are the different elements that determine the quality of a screen and which stats should I go for in each element? For the record, I'm not interested in opinions about screen size, but picture quality for lots of reading/coding.

    Read the article

  • Ubuntu 12.10 Nvidia GT555M Bumblebee

    - by herczigem
    I have laptop with Nvidia GT 555M video card. System Ubuntu 12.10, kernel Linux 3.5.0-17-generic step what i do: sudo add-apt-repository ppa:bumblebee/stable sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install bumblebee bumblebee-nvidia restart system optirun glxgears This message give me: Cannot access secondary GPU - error: Could not load GPU driver Aborting because fallback start is disabled. Open sudo gedit /etc/bumblebee/bumblebee.conf and change Driver= to Driver=nvidia and KernelDriver=nvidia-current to KernelDriver=nvidia. Restart the system and run optirun glxgears. This message gives me: The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect. Could not connect to bumblebee daemon - is it running? Anybody have idea?!

    Read the article

  • ATI Proprietary Driver Over/Underscan setting ignored after reboot

    - by Lassi
    I installed the proprietary driver (fglrx-updates) on Ubuntu 12.10 64-bit for my graphics card (ATI Radeon HD 7570). I am using two displays, one connected with DVI, one with HDMI. I set the desktop to be expanded to both screens and disabled the under scan for the HDMI screen, which is always for some reason enabled on HDMI screens. Now the issue. Everything was fine until I restarted my computer. After reboot, the screen connected with HDMI cable had the black borders again, meaning that the under scan is again enabled. I checked the ATI CCC, and under scan was disabled. However, moving the slider to enable under scan and then back to zero fixed the issue -- temporarily. The same issue is repeated every time I restart my computer. The settings remains the same, but the computer seems to ignore it. Any ideas how I could solve the issue?

    Read the article

  • No bass from the speakers

    - by Bhavesh Jogadia
    In Ubuntu 11.10 no bass sound at all when try to play mp3 or 2channels audio. I have 5.1/6 channels speakers. When I test speakers from the sound preference it works perfectly fine and then I try to play any MP3 there is no bass only the speakers work, I play 5.1 movies it plays fine bass sounds good. Also tried to to some changes as instructed with deamon.conf file but no go... When I turn my speakers on play speakers only mode it plays the bass but sound quality is not good compared to normal playing. I have a Creative 5.1 vx ca0160 sound card. In Windows also had the same problem unless I do bass redirection crossover frequency so is there any kinda software package or any kinda changes i can make in system file so that my speaker bass works fine or any thing who can let me change the bass redirection crossover frequency?

    Read the article

  • Replace Broadcom "wl" driver with "b43"

    - by Laszlo Boros
    I'm using Ubuntu 10.04.4 LTS, and in my laptop there is a Broadcom BCM4312 wlan card. lspci output: 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Subsystem: Broadcom Corporation Device 04b5 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 81-ac-1d-ff-ff-12-54-92 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb So as you can see, the current (and default) driver is wl - installed with jockey. But I have another Ubuntu based distribution on my laptop (BackTrack linux), which is also 10.04, but it has the b43 driver installed and the overall performance is MUCH better. So I would like to install it on this OS too, but even google didn't help me. So my question is how to install the latest b43 driver on my Ubuntu?

    Read the article

  • How do I get an Acer Aspire One D270 working?

    - by ronnie
    I was planning to buy Acer Aspire One D270 within a few days and as everybody installs linux on their netbook I was also planning to do that. Now, my question is how is Acer's hardware compatibility with linux and specifically in respect to the new Acer Aspire One D270. Has anybody tried installing linux on these new netbooks. It will be a great help if a D270 user can share his/her experience with linux usage. I read on some forums that there is some linux driver issue with Intel GMA 3600 and that people are not able to adjust their brightness. So, as I am a linux noob is this a major issue or not. Specs: RAM : 2Gb DDR3 Processor: Intel N2600(Cedar Trail) Graphics: Intel GMA 3600 HardDisk: 320Gb 5400 rpm

    Read the article

  • Shotwell not available in 11.10

    - by John Speed
    I had used Shotwell happily previously then updated to Natty last week. Despite Shotwell showing on the tool bar on screen, when clicked, nothing happened, and it ignored my SD card when loaded. I read all sorts of remedies and tried everything to no avail. When I next turned on the laptop, Ocelot was available so with nothing to loose, I upgraded again. Still no Shotwell. Tried all the new fixes and now atleast I have the icon pictures but nothing behind it. When I ran the command to load the log file, Shotwell loaded and all my photos are present. Exited programme, and now nothing. Can anyone tell me where I have gone wrong please.

    Read the article

  • PIN request at each login after update to Maverick

    - by Giacomo Verticale
    I have a netbook with included 3G mobile broadband card (Huawei E620). I have configured the broadband network connection in the Network Manager and it works perfectly. However since Maverick upgrade, a window appears just after login I asking for the SIMcard PIN. This happens every time I log in and did not happen with Lucid. Note that the PIN is stored in the configuration of the mobile broadband connection and Lucid was satisfied with that. Is there a way to prevent this request or, at least, to have the system rember the PIN and stop ansking for it? If it may be useful, the broadband network connection is configured as not being available for other users. Also, I would like to keep the SIMcard asking for the PIN; only I do not want to insert it manually at login.

    Read the article

  • How to Quickly Check If Your Computer Can Run a PC Game

    - by Chris Hoffman
    PC gaming isn’t quite as simple as console gaming. If you have a laptop with weak graphics hardware or an older PC, it’s important to check whether your computer can support a game before you spend your hard-earned cash. Gamers don’t have to upgrade their hardware as often as they used to. Even a gaming PC built years ago should be able to handle the newest games just fine. Laptops not build for gaming and older PCs are a different matter.    

    Read the article

  • No sound 12.04 (Dummy output)

    - by Edgar Adrian Alvarez
    Its been weeks with no sound. I feel like Ive tried everything but somethings just dont seem right. I am a new user and so far i love Ubuntu but this sound issue is making me unsure. Im NOT muted. Ive tried multiple jacks, front and back. in alsamixer it says choose sound card and I have only thr 'hda Intel' option. In pulseaudio I only have 'dummy output'. When I have Youtube on I can see audio being detected in pavucontrol but nothing is coming out of the speakers. Im getting desperate, some one please walk me thru this. http://www.alsa-project.org/db/?f=c7377242d96ea884edebd807f4fe71f619b8d6af What more information should i provided?

    Read the article

  • How To Specify Bitrate, Codec and Demultiplexing for VLC Video Capture or Recording

    - by Subhash
    I capture video from old TV tuner card - Pinnacle PCTV - using VLC. The video is from the Composite input and audio is from I guess the mixer or Line in. The command I use is: vlc v4l2:///dev/video0:normal=pal:width=720:height=576:input=1 :input-slave="alsa://hw:0,0" In VLC, I have enabled the Advanced Controls toolbar, which allows me to record videos when I want to. However, these videos are uncompressed - very big and play only with VLC. Totem throws the "Could not demultiplex stream" error. I need to convert them using WinFF to reduce their size and make them playable with Totem and other software. My question is whether I can configure the recording settings - the codecs and the bitrate, and also get the stream demultiplexed. If I pass any -sout parameter with command I get a "Segmentation fault". I use 64-bit Ubuntu 10.10.

    Read the article

  • Please help ubuntu or any other linux os is not booting from cd or usb

    - by Amith
    I will tell you the whole story,one night when i was using KDE on Ubuntu 10.10 Kwin crashed then i shut down the os next day when i booted it the display came completely garbled and i went to safe graphics mode ,it worked and in reinstalled the Nvidia drivers and then restarted .Then immediatly, It said No init found Busybox XX.XX then I thought ill do a fresh install I inserted the ubuntu cd provided to me by Canonical.When i pressed 'try ubuntu without installing' instead of the graphic boot screen i saw.Ubuntu 10.10 in regular text and a progress bar few seconds after that the screen was flooded with error messages first alot of white then red.I then went to my win7 installation and saw a website which told me to find a Ext3 reader and format the ubuntu partition and the swap.I did that and when i restarted. GRUB configuration not found grub> Then it took my win 7 ERD and restored 7's bootloder Xp and 7 were working i put in the livecd again,Same error,Now usin my seven,Please help geeks,Ive even tried Knoppix,Fedora,Debiane.t.c they wont boot and i want to retain my win 7 and winxp partitions,I really miss linux.

    Read the article

  • Ubuntu won't use my nvidia driver

    - by Spencer
    I'm running Ubuntu 12.10 on a laptop that has both Intel Integrated Graphics and an Nvidia Geforce 540m. I installed the drivers properly, but I can't manage to actually use them. I'm stuck in 640x480 resolution and the drivers aren't detected anywhere. Each time I open the Nvidia settings menu it says: "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (Just run 'nvidia-xconfig' as root), and restart the X server." ^Doing so does not help. Anybody have any ideas?

    Read the article

  • How to edit item in a listbox shown from reading a .csv file?

    - by Shuvo
    I am working in a project where my application can open a .csv file and read data from it. The .csv file contains the latitude, longitude of places. The application reads data from the file shows it in a static map and display icon on the right places. The application can open multiple file at a time and it opens with a new tab every time. But I am having trouble in couple of cases When I am trying to add a new point to the .csv file opened. I am able to write new point on the same file instead adding a new point data to the existing its replacing others and writing the new point only. I cannot use selectedIndexChange event to perform edit option on the listbox and then save the file. Any direction would be great. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.IO; namespace CourseworkExample { public partial class Form1 : Form { public GPSDataPoint gpsdp; List<GPSDataPoint> data; List<PictureBox> pictures; List<TabPage> tabs; public static int pn = 0; private TabPage currentComponent; private Bitmap bmp1; string[] symbols = { "hospital", "university" }; Image[] symbolImages; ListBox lb = new ListBox(); string name = ""; string path = ""; public Form1() { InitializeComponent(); data = new List<GPSDataPoint>(); pictures = new List<PictureBox>(); tabs = new List<TabPage>(); symbolImages = new Image[symbols.Length]; for (int i = 0; i < 2; i++) { string location = "data/" + symbols[i] + ".png"; symbolImages[i] = Image.FromFile(location); } } private void openToolStripMenuItem_Click(object sender, EventArgs e) { FileDialog ofd = new OpenFileDialog(); string filter = "CSV File (*.csv)|*.csv"; ofd.Filter = filter; DialogResult dr = ofd.ShowDialog(); if (dr.Equals(DialogResult.OK)) { int i = ofd.FileName.LastIndexOf("\\"); name = ofd.FileName; path = ofd.FileName; if (i > 0) { name = ofd.FileName.Substring(i + 1); path = ofd.FileName.Substring(0, i + 1); } TextReader input = new StreamReader(ofd.FileName); string mapName = input.ReadLine(); GPSDataPoint gpsD = new GPSDataPoint(); gpsD.setBounds(input.ReadLine()); string s; while ((s = input.ReadLine()) != null) { gpsD.addWaypoint(s); } input.Close(); TabPage tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; lb.Width = 300; int selectedindex = lb.SelectedIndex; lb.Items.Add(mapName); lb.Items.Add("Bounds"); lb.Items.Add(gpsD.Bounds[0] + " " + gpsD.Bounds[1] + " " + gpsD.Bounds[2] + " " + gpsD.Bounds[3]); lb.Items.Add("Waypoint"); foreach (WayPoint wp in gpsD.DataList) { lb.Items.Add(wp.Name + " " + wp.Latitude + " " + wp.Longitude + " " + wp.Ele + " " + wp.Sym); } tabPage.Controls.Add(lb); pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = name; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); tabControl1.Controls.Add(tabPage); tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = mapName; string location = path + mapName; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); PictureBox pb = new PictureBox(); pb.Name = "pictureBox" + pn; pb.Image = Image.FromFile(location); tabControl2.Controls.Add(tabPage); pb.Width = pb.Image.Width; pb.Height = pb.Image.Height; tabPage.Controls.Add(pb); currentComponent = tabPage; tabPage.Width = pb.Width; tabPage.Height = pb.Height; pn++; tabControl2.Width = pb.Width; tabControl2.Height = pb.Height; bmp1 = (Bitmap)pb.Image; int lx, ly; float realWidth = gpsD.Bounds[1] - gpsD.Bounds[3]; float imageW = pb.Image.Width; float dx = imageW * (gpsD.Bounds[1] - gpsD.getWayPoint(0).Longitude) / realWidth; float realHeight = gpsD.Bounds[0] - gpsD.Bounds[2]; float imageH = pb.Image.Height; float dy = imageH * (gpsD.Bounds[0] - gpsD.getWayPoint(0).Latitude) / realHeight; lx = (int)dx; ly = (int)dy; using (Graphics g = Graphics.FromImage(bmp1)) { Rectangle rect = new Rectangle(lx, ly, 20, 20); if (gpsD.getWayPoint(0).Sym.Equals("")) { g.DrawRectangle(new Pen(Color.Red), rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("hospital")) { g.DrawImage(symbolImages[0], rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("university")) { g.DrawImage(symbolImages[1], rect); } } } } pb.Image = bmp1; pb.Invalidate(); } } private void openToolStripMenuItem_Click_1(object sender, EventArgs e) { FileDialog ofd = new OpenFileDialog(); string filter = "CSV File (*.csv)|*.csv"; ofd.Filter = filter; DialogResult dr = ofd.ShowDialog(); if (dr.Equals(DialogResult.OK)) { int i = ofd.FileName.LastIndexOf("\\"); name = ofd.FileName; path = ofd.FileName; if (i > 0) { name = ofd.FileName.Substring(i + 1); path = ofd.FileName.Substring(0, i + 1); } TextReader input = new StreamReader(ofd.FileName); string mapName = input.ReadLine(); GPSDataPoint gpsD = new GPSDataPoint(); gpsD.setBounds(input.ReadLine()); string s; while ((s = input.ReadLine()) != null) { gpsD.addWaypoint(s); } input.Close(); TabPage tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; ListBox lb = new ListBox(); lb.Width = 300; lb.Items.Add(mapName); lb.Items.Add("Bounds"); lb.Items.Add(gpsD.Bounds[0] + " " + gpsD.Bounds[1] + " " + gpsD.Bounds[2] + " " + gpsD.Bounds[3]); lb.Items.Add("Waypoint"); foreach (WayPoint wp in gpsD.DataList) { lb.Items.Add(wp.Name + " " + wp.Latitude + " " + wp.Longitude + " " + wp.Ele + " " + wp.Sym); } tabPage.Controls.Add(lb); pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = name; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); tabControl1.Controls.Add(tabPage); tabPage = new TabPage(); tabPage.Location = new System.Drawing.Point(4, 22); tabPage.Name = "tabPage" + pn; pn++; tabPage.Padding = new System.Windows.Forms.Padding(3); tabPage.Size = new System.Drawing.Size(192, 74); tabPage.TabIndex = 0; tabPage.Text = mapName; string location = path + mapName; tabPage.UseVisualStyleBackColor = true; tabs.Add(tabPage); PictureBox pb = new PictureBox(); pb.Name = "pictureBox" + pn; pb.Image = Image.FromFile(location); tabControl2.Controls.Add(tabPage); pb.Width = pb.Image.Width; pb.Height = pb.Image.Height; tabPage.Controls.Add(pb); currentComponent = tabPage; tabPage.Width = pb.Width; tabPage.Height = pb.Height; pn++; tabControl2.Width = pb.Width; tabControl2.Height = pb.Height; bmp1 = (Bitmap)pb.Image; int lx, ly; float realWidth = gpsD.Bounds[1] - gpsD.Bounds[3]; float imageW = pb.Image.Width; float dx = imageW * (gpsD.Bounds[1] - gpsD.getWayPoint(0).Longitude) / realWidth; float realHeight = gpsD.Bounds[0] - gpsD.Bounds[2]; float imageH = pb.Image.Height; float dy = imageH * (gpsD.Bounds[0] - gpsD.getWayPoint(0).Latitude) / realHeight; lx = (int)dx; ly = (int)dy; using (Graphics g = Graphics.FromImage(bmp1)) { Rectangle rect = new Rectangle(lx, ly, 20, 20); if (gpsD.getWayPoint(0).Sym.Equals("")) { g.DrawRectangle(new Pen(Color.Red), rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("hospital")) { g.DrawImage(symbolImages[0], rect); } else { if (gpsD.getWayPoint(0).Sym.Equals("university")) { g.DrawImage(symbolImages[1], rect); } } } } pb.Image = bmp1; pb.Invalidate(); MessageBox.Show(data.ToString()); } } private void exitToolStripMenuItem_Click(object sender, EventArgs e) { this.Close(); } private void addBtn_Click(object sender, EventArgs e) { string wayName = nameTxtBox.Text; float wayLat = Convert.ToSingle(latTxtBox.Text); float wayLong = Convert.ToSingle(longTxtBox.Text); float wayEle = Convert.ToSingle(elevTxtBox.Text); WayPoint wp = new WayPoint(wayName, wayLat, wayLong, wayEle); GPSDataPoint gdp = new GPSDataPoint(); data = new List<GPSDataPoint>(); gdp.Add(wp); lb.Items.Add(wp.Name + " " + wp.Latitude + " " + wp.Longitude + " " + wp.Ele + " " + wp.Sym); lb.Refresh(); StreamWriter sr = new StreamWriter(name); sr.Write(lb); sr.Close(); DialogResult result = MessageBox.Show("Save in New File?","Save", MessageBoxButtons.YesNo); if (result == DialogResult.Yes) { SaveFileDialog saveDialog = new SaveFileDialog(); saveDialog.FileName = "default.csv"; DialogResult saveResult = saveDialog.ShowDialog(); if (saveResult == DialogResult.OK) { sr = new StreamWriter(saveDialog.FileName, true); sr.WriteLine(wayName + "," + wayLat + "," + wayLong + "," + wayEle); sr.Close(); } } else { // sr = new StreamWriter(name, true); // sr.WriteLine(wayName + "," + wayLat + "," + wayLong + "," + wayEle); sr.Close(); } MessageBox.Show(name + path); } } } GPSDataPoint.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; namespace CourseworkExample { public class GPSDataPoint { private float[] bounds; private List<WayPoint> dataList; public GPSDataPoint() { dataList = new List<WayPoint>(); } internal void setBounds(string p) { string[] b = p.Split(','); bounds = new float[b.Length]; for (int i = 0; i < b.Length; i++) { bounds[i] = Convert.ToSingle(b[i]); } } public float[] Bounds { get { return bounds; } } internal void addWaypoint(string s) { WayPoint wp = new WayPoint(s); dataList.Add(wp); } public WayPoint getWayPoint(int i) { if (i < dataList.Count) { return dataList[i]; } else return null; } public List<WayPoint> DataList { get { return dataList; } } internal void Add(WayPoint wp) { dataList.Add(wp); } } } WayPoint.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace CourseworkExample { public class WayPoint { private string name; private float ele; private float latitude; private float longitude; private string sym; public WayPoint(string name, float latitude, float longitude, float elevation) { this.name = name; this.latitude = latitude; this.longitude = longitude; this.ele = elevation; } public WayPoint() { name = "no name"; ele = 3.5F; latitude = 3.5F; longitude = 0.0F; sym = "no symbol"; } public WayPoint(string s) { string[] bits = s.Split(','); name = bits[0]; longitude = Convert.ToSingle(bits[2]); latitude = Convert.ToSingle(bits[1]); if (bits.Length > 4) sym = bits[4]; else sym = ""; try { ele = Convert.ToSingle(bits[3]); } catch (Exception e) { ele = 0.0f; } } public float Longitude { get { return longitude; } set { longitude = value; } } public float Latitude { get { return latitude; } set { latitude = value; } } public float Ele { get { return ele; } set { ele = value; } } public string Name { get { return name; } set { name = value; } } public string Sym { get { return sym; } set { sym = value; } } } } .csv file data birthplace.png 51.483788,-0.351906,51.460745,-0.302982 Born Here,51.473805,-0.32532,-,hospital Danced here,51,483805,-0.32532,-,hospital

    Read the article

  • Ubuntu does not work with Nvidia drivers, gives random squares after logging in

    - by jimbo
    I tried installing both with wubi and by booting from a usb drive. After I tried both it was the same. Ubuntu tried to login, but after a while, a weird pattern with squarely shapes appeared. At one point, after using recovery mode and then the low graphics one (i don't remember how it was called exactly) i managed to get in. It still didn't display at correct resolution, and the mouse was invisible at times. However, after rebooting once, because i tried downloading the nvidia drivers, i didn't manage to get in again, so i have the same problem... I have no idea what to try to become unstuck. The main problem is that after the login, ubuntu crashes, with a screen full of randomly coloured squares. Should I just give up?

    Read the article

  • Unity spontaneously logs out in Ubuntu 12.04

    - by Yang
    This started happening after I upgraded from 11.10. I'm running on a Latitude 13 laptop with an Intel Mobile 4 Series Chipset Integrated Graphics Controller (not Nvidia) - no proprietary drivers. It seems to happen under load, though I can't tell if the load is caused by something with this problem or by a program I'm running. I'd like to try nailing this problem. Ideally I don't want to switch to something else (at least not before knowing that that's the only way out and that it's specific to Unity and not, say, X).

    Read the article

  • QotD: Sharat Chander on Java Embedded @ JavaOne

    - by $utils.escapeXML($entry.author)
    This year, JavaOne is expanding to offer business leaders a chance to participate, as well. I'm very proud to announce the deployment of "Java Embedded @ JavaOne." With the explosion of new unconnected devices and data creation, a new IT revolution is taking place in the embedded space. This net-new conference will specifically contain business content addressing the growing embedded ecosystem.As part of the "Java Embedded @ JavaOne" call-for-papers (CFP), interested speakers can continue forward and make business submissions, and due to high interest they also have the additional opportunity to make technical submissions for the flagship JavaOne conference, but _*ONLY*_ for the "Java ME, Java Card, Embedded and Devices" track. Sharat Chander in a set of posts on Java Embedded @ JavaOne to the JUG Leaders mailing list.

    Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >