Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 235/376 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

• How to install RAID drivers on already installed Windows 7?

  - by happysencha

  64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

  Read the article

• How to prevent dual booted OSes from damaging each other?

  - by user1252434

  For better compatibility and performance in games I'm thinking about installing Windows additionally to Linux. I have security concerns about this, though. Note: "Windows" in the remaining text includes not only the OS but also any software running on it. Regardless of whether it comes included or is additionally installed, whether it is started intentionally or unintentionally (virus, malware). Is there an easy way to achieve the following requirements: Windows MUST NOT be able to kill my linux partition or my data disk neither single files (virus infection) nor overwriting the whole disk Windows MUST NOT be able to read data disk (- extra protection against spyware) Linux may or may not have access to the windows partition both Linux and Windows should have full access to the graphics card this rules out desktop VM solutions for gaming I want the manufacturer's windows graphics card driver Regarding Windows to be unable to destroy my linux install: this is not just the usual paranoia, that has happened to me in the past. So I don't accept "no ext4 driver" as an argument. Once bitten, twice shy. And even if destruction targeted at specific (linux) files is nearly impossible, there should be no way to shred the whole partition. I may accept the risk of malware breaking out of a barrier (e.g. VM) around the whole windows box, though. Currently I have a system disk (SSD) and a data disk (HDD), both SATA. I expect I have to add another disk. If i don't: even better. My CPU is a Intel Core i5, with VT-x and VT-d available, though untested. Ideas I've had so far: deactivate or hide other HDs until reboot at low level possible? can the boot loader (grub) do this for me? tiny VM layer: load windows in a VM that provides access to almost all hardware, except the HDs any ready made software solution for this? Preferably free. as I said: the main problem seems to be to provide full access to the graphics card hardware switch to cut power to disks commercial products expensive and lots of warnings against cheap home built solutions preferably all three hard disks with one switch (one push) mobile racks - won't wear of daily swapping be a problem?

  Read the article

• Exim To Include Internal Email When Sending

  - by user219951

  I wonder if you can help me out... at the moment were using exim to relay our emails to an smtp_relay. The only problem is if the user exists and has an email address it won't exit the server and send them mail using our relay. I need it to go to the relay even if it's an internal email address. Hope that make sense, this is how we have got our relay setup at the moment smart_route: driver = manualroute domains = !+local_domains transport = remote_smtp_smtpauth route_list = * smtp.sendgrid.net:587 Thanks

  Read the article

• Ubuntu 9.10 Nvidia GTX 260 x64 installation

  - by klapi

  I think I tried everything I could but I still can't get my Nvidia GTX 260 to run on the newest ubuntu 9.10 x64. Update: I was able to stop the gdm with sudo service gdm stop However, after downloading the latest driver from nvdia - I am told that my video card is not supported.

  Read the article

• Can 32-bit print drivers work on 64-bit windows?

  - by Matt

  I'm reading around and it seems that 32 bit drivers do not work under 64 bit windows. Is this true? since 32-bit applications can run under 64 bit windows it seems ridiculous that 32-bit printer drivers cannot. Are printer drivers run at the kernel level? Sounds like we're in for driver hell for our RDP environments.

  Read the article

• Install Kernel that's not available from Ubuntu Distro Repository

  - by Phuong Nguyen

  I'm using Ubuntu 9.10 rightnow, but I'd like to install kernel 2.6.33 into it. I see that there's deb files on kernel sites. Problems is that I cannot just download these deb files and have dpkg install them for me because wireless and graphic drivers cannot be compiled against the new kernel. Is there any way to do that?

  Read the article

• What are the most common dangerous domains that I should block?

  - by Dalia

  I am trying to configure my wireless router to block domains that are potentially dangerous to privacy, security, and bandwidth-hogs. Is there a list of domains that I can block at the router level? On a machine level, I have set the hosts file from www.mvps.org and that works on my machine. However, I want to implement something at the router level too - so that all computers in my household are somewhat protected.

  Read the article

• Are filesystem operations a function of the kernel?

  - by hydroparadise

  I suppose the question would be OS specific, so I'll take the following scenarios: Winodows (NTFS) OSX (HFS) Linux (ext2,ext3,ext4) Each operating system has it's default filesystem it operates os (OSX, I beleive, only has the one choice available). I've noticed some utilities out there for OS's to read different file systems (which obvisouly is NOT apart of the kernel), which got me thinking: Are filesystem operations a function of a driver (ie, potentially modular), or is it truly apart of the kernel?

  Read the article

• Why is the screen resolution different between Windows 7 Ultimate and Enterprise editions?

  - by IDispose

  I installed Windows 7 Enterprise 64 bit edition on my Dell Precision M6400 with an nVidia Quadro Fx 2700M card and I see that even though the screen resolution is set to 1920 X 1200, its not the same as the Windows 7 Ultimate 64 bit installed on a second hard drive. Both OSes show that the screen resolution is set at 1920 X 1200 but Ultimate shows more pixels than Enterprise. I also reinstalled the display driver but in vain. Any ideas? TIA

  Read the article

• Access Windows from Mac via Remote Dekstop Connection using hostname

  - by stevekuo

  I'm using Snow Leopard with Remote Desktop Connection attempting to access a Windows XP machine on a home network. If I specify the Windows PC's hostname it won't connect. Only by specifying the IP address does it connect. It's the same issue when trying to ping the Windows machine - IP address works, hostname doesn't. Both machines are on the same subnet connecting with a wireless router. Is there way to get OSX to resolve the Windows PC by its hostname?

  Read the article

• Unable to enter BIOS in Windows 7

  - by sams5817

  I was using desktop running on a 64 bit Windows 7 professional, I trying to enter BIOS to check the virtualization setting, when I boot or restart my desktop, before enter Windows, I don't see any screen or instruction to entering BIOS. I wonder is it I didn't install BIOS on the machine or? How can I check whether BIOS exist or it is come together upon installing mother board driver? Please advise.

  Read the article

• can't find ip of wifi acess point

  - by Crash893

  I setup an wireless AP (linksys wifi router) to have no dhcp and point to the main router as the default gateway. I also set it up to obtain a ip from the network but when i go to my main router and look for it i don't see any ip's that it could be If i use net stumbler i can see the mac address of the wifi portion of it but Im at a loss how to get into the web console of this router any ideas on how to "find" this router?

  Read the article

• How to configure LAN controller to run at 1Gbps connectivity?

  - by Metro Smurf

  I have a few computers connected through a Gigabit router which show 1Gbps connections. However, one of the computers only shows 100Mbps connectivity even though it is capable of 1Gbps. I am not seeing an errors in the event viewer. Computer Specs Windows XP SP3 x86 A8N-SLI Premium MoBo Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Driver: Marvell v11.24.3.3 (2/15/2010) Networking Specs Netgear RangeMax Premium Wireless-N Gigabit Router (WNR3500) CAT6 wiring Question: How can I configure the above computer to run at 1Gbps connectivity like the others?

  Read the article

• Getting IP Address of Access Point.

  - by andreas

  Hi Folks, recently I turned my Router to a wireless access point for my home network. Unfortunately, I forgot to note down the AP's IP Address and Subnet. How do I reliably get the IP of my AP? Thank's in advance.

  Read the article

• How to selectively load device drivers in Windows 7

  - by guillermooo

  I sometimes hook up my laptop to a regular keyboard and mouse set. These require drivers that I don't want loaded when I'm using my laptop's own keyboard and touchpad. So... Can I tell Windows 7 to selectively load one or the other driver based on this condition, or switch between the two?

  Read the article

• How to read external USB hard drive formatted ext3 from Windows 7?

  - by CChriss

  I had to format a USB hard drive to ext3 to use it with a Linksys nas box. Now I can't read the hd when I unplug it from the nas and plug it directly into my Windows 7 computer. (The computer accesses the nas over a wireless connection, so I like to plug the hd directly into my pc when transferring large files.) How can I leave the hd formatted with ext3 and yet be able to access it (read/write) when I plug it directly into my pc?

  Read the article

• How to connect to MySQL server in LAN

  - by waelbk

  Ok, Here is the technical description. My laptop's config: Ip Adress:192.168.2.5 Mysqlserver 5.0 on port : 3306 Operating system: Ubuntu the database is in this machine My friend's laptop config: Ip Adress:192.168.2.4 Mysqlserver 5.0 on port : 3306 Operating system: Windows XP Both are on a wireless LAN connected through a belkin router (192.168.2.1) I put this but its not working: url = "jdbc:mysql://192.168.2.5:3306/Database" so how configure to connect to this database?

  Read the article

• Ubuntu is not detecting my LCD properly , how do I fix the problem ?

  - by Nishant

  I want to reduce the brightness of my monitor as per my wish . But ubuntu System-Prefernce-Monitor doesn't have options and I think that coz it uses generic drivers . How do I fix this problem ? Model is Acer One Zg5 , Ubuntu 10.10 OS . Do I load the LCD driver ? I think it has a intel based inbuilt GFX card . /proc/acpi/video/OVGA/LCD$ cat * device_id: 0x0400 type: UNKNOWN known by bios: no state: 0x1d query: 0x00

  Read the article

• LAN connection loses network access randomly

  - by bill11

  Hi, Windows 7 is a great OS but there are some problems which should be solved from Microsoft as fast as possible. On my Computer the LAN connection randomly loses its connection. I don't know why but I think this problem depends on my network driver which is only available for Windows XP (where it always worked perfectly). I can not reproduce this issue. Has anybody here had the same problem?

  Read the article

• How much audio latency is noticeable by human brain?

  - by Borek

  I am choosing a wireless headset for my PC (I hate cables) and am looking at Sennheiser RS 170 / 180. They supposedly sound great, however, there is a 25ms audio latency. I've heard that this is OK when watching TV or listening musing but is bad for games. The question is - has there been any research / hard data that would show how much of a delay is noticeable by human brain? 25ms doesn't sound like a lot but I may be wrong.

  Read the article

• How can I find out what DPI that my laptop supports?

  - by michael

  I have a new HP dv7t laptop. Can I find out what DPI this laptop supports so that I can set my Ubuntu settings? I think I got the resolution working right after I installed the proprietary driver for the Nvdia graphics card. Thank you.

  Read the article

• Where can i get the motherboard cd's

  - by Velmrugan

  Hi, Can you please tell me where can i get the mother board softwares for my intel celeron processor. I need Audio driver, Graphics & windows installer for my Intel celeron processor. Where can i download all these softwares, freely. I searched in Intel homepage but i cant find what and all to download, So please can u tell me briefly how to download these files. Regards, Velmurugan

  Read the article

• How can I report a product fault to Microsoft?

  - by JL

  I have a Logitech Headset that uses MS Supplied drivers, in this case Generic USBAudio Driver. The sound is really choppy in a 64bit version of Win 7. 32Bit works perfectly fine. How is it possible for me to notify MS, and get the problem fixed?

  Read the article

• My remote controller is not working.Hp Laptop Dv4

  - by Vibin Jith

  I am new with HP. My problem is my remote control is not working. Is there is any driver is required ? if yes which one? i am using Hp Pavilion DV4 1211tu notebook Thank u

  Read the article

• Emulate middle mouse click by pressing the two buttons at the same time

  - by JcMaco

  I upgraded the driver of my Synaptics Touchpad under XP and I can no longer press the left and right buttons simultaneously to simulate a middle click. How can I turn this back on?

  Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >