Search Results

Search found 16035 results on 642 pages for 'connection pooling'.

Page 237/642 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Connecting to a LDAPS server

  - by Pavanred

  I am working on a development machine and I am trying to connect to my LDAP server. This is what I do - telnet ldaps- 686 then the response is - Could not open connection to the host on port 686 : connect failed But, the strange part is when I connect to my server - telnet ldap- 389 then the connection is successful. My question is, why does this happen? Do I have to install SSL certificate on the client machine where I make the call from? I do not know much about this. I know for a fact that the LDAP server is working fine because other applications are successfully using it currently.

  Read the article

• Unreasonably slow stunnel

  - by Kit Sunde

  I setup stunnel on OSX to tunnel traffic to my Django dev server because Facebook needs HTTPS these days but I noticed it's being absurdly slow. It seems like it can only handle a single connection at a time and even the connection is slow when I'm connecting to localhost. I've tried using some performance tips found online and so my config is setup as: pid= # foreground=yes cert=./cacert.pem key=./privkey.pem libwrap=no debug=0 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [https] accept=8443 connect=8000 Is there a way to get more performance or more suitable way of setting up HTTPS for my dev server?

  Read the article

• How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

  - by David Siegel

  How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

  Read the article

• How to Access an AWS Instance with RDC when behind a Private Subnet of a VPC

  - by dalej

  We are implementing a typical Amazon VPC with Public and Private Address - with all servers running the Windows platform. The MS SQL instances will be on the private subnet with all IIS/web servers on the public subnet. We have followed the detailed instructions at Scenario 2: VPC with Public and Private Subnets and everything works properly - until the point where you want to set up a Remote Desktop Connection into the SQL server(s) on the private subnet. At this point, the instructions assume you are accessing a server on the public subnet and it is not clear what is required to RDC to a server on a private subnet. It would make sense that some sort of port redirection is necessary - perhaps accessing the EIP of the Nat instance to hit a particular SQL server? Or perhaps use an Elastic Load Balancer (even though this is really for http protocols)? But it is not obvious what additional setup is required for such a Remote Desktop Connection?

  Read the article

• DVI-D Splitter Not Working with GeForce 8400gs

  - by jimdrang

  I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

  Read the article

• Windows Server 2003 Terminal Services error

  - by Adrian S

  Hi! I have a Win2K3 machine which I want to access via remote desktop. When I try remote desktop on another machine the session just ends as soon as it attempts connection. I never see the log-on sceeen or anything. It just returns to the remote desktop connection dialog. I have checked the service on the target machine and it's up and running, so how can I determine the error? Is there any way to re-install terminal services and see if it just fixed?

  Read the article

• Deploy multiple emails to email providers, but without showing favouritism

  - by Ardman

  We are currently developing a new email deployment system. We have the system currently configured so that it reads a record from the database and loads the email content and deploys it to the target. Now we want to move this over to multiple threads. That is easily done, except we then hit the email providers returning SMTP codes referring to "Too many connections", or "Deferred connection". The solution to this is to have a thread open up a connection to the email provider and deploy n emails and then disconnect. We have currently configured the application so that it will support these session based email deployments. The problem is this, the database table has multiple email addresses in and they aren't grouped by email provider because that will show favouritism. We need to be able to retrieve a set number of, i.e. Hotmail, emails (@hotmail.com, @hotmail.co.uk, @live.co.uk) so that we are reducing the number of connections to Hotmail and reducing the risks of getting the "Too many connections" error. We are at the point now where we have gone round and round in circles trying to get a solution, so I thought I'd throw it out there and see if anyone has any ideas? EDIT I would like to stress that this application is not used for spamming purposes.

  Read the article

• IIS FTP service - download timeouts and restarts getting the data twice

  - by accel229

  We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

  Read the article

• iis php internal server error

  - by user1633206

  I developed a website, using php/mysql running at IIS Server as CGI Server API. Suddenly it gives me error 500 after two weeks. It has lot of scripts but index.php home is working. But other script that has header redirection What's wrong with my scripts. livehttp addon of firefox says.. GET /allplans.php?lang=ar&cat=1 HTTP/1.1 Host: www.myhost.com... [edited] User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:14.0) Gecko/20100101 Firefox/14.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Cache-Control: max-age=0 HTTP/1.1 500 Internal Server Error Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 03 Sep 2012 08:09:13 GMT Content-Length: 1208 Connection: Keep-Alive

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

• emacs and putty on windows 7

  - by twilbrand

  My workstation was recently updated to Windows 7. I've downloaded putty and have configured it to the same settings I had under Vista. Whenever I ssh to a vm running Centos 5.4 and try to run emacs on a file, I'm getting an error about a connection to an X server: [ecto1 ~]$ emacs foo.bar Connection lost to X server `localhost:10.0' I never received this error message when I had Vista. I can get around it by aliasing emacs to 'emacs -nw', but I don't feel that I should have to do this. My co-worker has the same hardware that had the same upgrade and his sessions do not seem to be doing this. Any advice? I can't find anything on google and don't know where else to start. [ecto1 ~]$ emacs -version GNU Emacs 21.4.1

  Read the article

• Frequent and weird wifi disconnections

  - by Sidou

  How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

  Read the article

• IP Connflict on network

  - by PSU_Kardi

  I keep getting an IP conflict on my home network and can't figure out why. I'm running a Belkin-N wireless router that has an Ethernet connection to my 360 and a wireless connection running to my laptop. It's WPA2 encryption and I have a nice password on my router consisting of letters , numbers and special characters. But for some reason I keep getting IP conflicts at night time...By the time I look into the problem I don't see anyone else on the network. Is my router giving me false positives?

  Read the article

• How to defend agains botnet http requests

  - by Killercode

  I have a server with WHM + CPanel and 5 of my costumer got infected with zbot. This means that the domains they have are constantly receiving requests to certain destinations. I tried to use mod_security but seems that it can't filter every requests... I don't really know why? I still see in the access log the connection comming in and it's consuming a LOT of bandwidth and server load Those accounts have already been clean so all of those requests go to error 404 (the ones catched on mod_security I am dropping the connection). Is there anymore ways to defend against this requests?

  Read the article

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• Packing up files on my machine, sending it to a server, and unpacking it

  - by MxyL

  I am implementing a feature in my application that sends all files in a specified folder to a server. I have the basic FTP transaction set up using Apache Commons FTPClient: it sets up a connection and transfers a file from one place to another. So I can simply loop over the directory and use this connection to transfer all the files. However, this could be better. Rather than transferring each file one by one, it makes more sense to pack it up in a compressed archive and then send the whole file at once. Saves time and bandwidth, since these are just text files so they compress nicely. So I would like to add automatic archive packing and unpacking. This is the workflow I have planned out, using zip compression: Zip all files in the folder Send the file over Unzip the files at its destination 1 and 2 are easy since the files are on the local machine, but I'm not sure how to accomplish the last step, when the files are now on a remote server. What are my options? I have control over what I can put and run on the server. Perhaps it is not necessary to do the packing/unpacking myself?

  Read the article

• Ethernet port sleeping on PS3 running linux

  - by Doug

  My lab has a PS3 running Ubuntu Linux 9.04 Server Edition. After a period of a few hours with no use, the Ethernet connection (eth0) seems to go to sleep, causing the connection to be lost. Pinging or trying to SSH into the machine results in no response. The fix I've been using is to access the machine locally and restart it (trying to bring eth0 down then up doesn't seem to correct it). I've tried setting up an hourly cron job that runs on the PS3 and pings another machine just to create network activity, but this doesn't seem to solve the problem either. Update: The solution was to run the above cron job much more frequently: every 10 minutes works.

  Read the article

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

• Samba domain trust errors on a specific interface

  - by John K

  We have a windows domain that also has RHEL member servers in it. All the servers have a primary network connection to the LAN, but some servers also have private dedicated links to one of our RHEL servers, which serves as a head to our SAN storage. This particular server is running Samba 3.5.15, and is running in domain authentication mode. Users can access shares on this server without a problem over the LAN connection from our Windows servers, but if a user tries to access the shares over a private link (i.e. a 192.168.1.2 address to the RHEL server) users get an error "The trust relationship between this workstation and the primary domain failed."

  Read the article

• Disable Thunderbird "failed to connect" notifications

  - by The Electric Muffin

  My network manager doesn't start until I log in, so for the first ten seconds or so after I login I have no Internet connection. The problem is that I have Thunderbird set to automatically start on login, so it helpfully tells me it "failed to connect" every time I log in. Also, my Internet connection isn't too reliable, so I sometimes get those messages even when I'm supposedly connected. Is there any way to disable these notifications, while still allowing the ones about new mail? Computer info: Thunderbird 15.0 $ uname -a Linux [HOSTNAME REDACTED] 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Probably irrelevant: NetworkManager Version 0.9.0.1 (nm09 20120407) KDE Platform Version 4.8.4 (4.8.4)

  Read the article

• Laptop's wifi router is not emitting signals therefore my PC and Nokia cell are not connecting to internet

  - by umer sanny

  I have a USB internet connection which I plugged into my laptop. I converted my laptop's Wifi into a Wifi router so that I can attach my PC and cell to this network and enjoy internet, but it doesn't work. I have a Dell Inspiron N5110 i7 Windows 7 64-bit laptop, Dell D865 PC and Nokia C5. My PC and cell are showing that there is a new Wifi connection available, but when I connect to it, it won't load any web page. Reason is my laptop's Wifi is not emitting any internet signals or may be some other issue which i dont know.. laptop's adapter is 802.11b/g/n I don't know why. How can I enjoy Wifi internet on laptop, PC and cell at the same time?

  Read the article

• SSH only works after intentionally failed password

  - by pyraz

  So, I'm having a rather weird problem. I have a server, that when I try to SSH into, immediately closes the connection if I type in the correct password on the first attempt. However, if I purposefully enter a wrong password on the first attempt, and then enter a correct password at the second or third prompt, it successfully logs me into the computer. Similarly, when I try to use public key authentication, I get an immediate closed connection. If, however, I enter a wrong password for my key file, followed by another wrong password once it reverts to password authentication, I can successfully log in as long as I provide the correct password at the second or third prompt. The machine is running Red Hat Enterprise Linux Server release 6.2 (Santiago), and is using LDAP and PAM for authentication. Any ideas on where to start debugging this one? Let me know what config files I need to provide and I'll be happy to do so.

  Read the article

• Slow http traffic between VMWare guest and host.

  - by toluju

  I have a web application running as an http server inside the VMWare guest OS, and I'm trying to access the content from the host OS. The guest is running Ubuntu, and the host is running Windows XP. The problem is, when I try to access the application from a browser in the host OS, the content takes a very long time to load (up to a minute for a single page). A browser in the guest OS can access the application with no problems. I've tried using both NAT and bridged networking, but the results are the same. The Windows firewall is turned off. The connection itself appears fine, as ping requests from guest to host as well as host to guest complete without errors or delays. Both guest and host can access the external Internet connection without a problem. I'm using VMWare Player. Any ideas?

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >