Search Results

Search found 8790 results on 352 pages for 'known hosts'.

Page 237/352 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Why are certain folders in my XP network share really, really slow?

  - by bikefixxer

  I have a workgroup set up with Windows XP. My file "server" is running XP Pro and the clients are running XP home. I've turned simple file sharing off on the server because certain clients need access to certain folders and not to others, and I want to keep it that way. Therefore, I've used the granular sharing/security settings to enable certain clients access to certain folders. I'm using the net use command in a batch file on the clients to add the share when they logon so it's always available via a mapped drive or a shortcut. On some clients "My Documents" points to the mapped drive, but all of the local and application settings stay local. Everything works well except for accessing a certain folder on the network. It contains a lot of random batch files and self-executable programs I use for diagnostics and what not, and nearly every time I open the folder the computer hangs for 15-60 seconds. This happens on every machine, including the server (but not nearly as often as the clients). I've searched high and low and cannot figure it out and it's driving me crazy. Here are all the things I've tried to no avail: Disabled firewall (XP) and anti-virus (ESET NOD32) Deleted any desktop.ini file I can find in the share Disabled "automatically search for network folders and printers" Disabled "remember each folder's view settings" Set HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer NoRecentDocsNetHood = 1 Tried with mapped drives and with UNC shortcuts Ran CHKDSK Removed Read-Only attribute from all folders (well, tried to remove, it always came back on with a half check) Added the server's static IP to the hosts file on the clients I've tried monitoring the server's performance to see if anything makes sense. Occasionally the issue coincides with a spike in pages/sec (memory) but not always. Other than that, everything else seems normal. The anti-virus would seem to be the most likely cause to me considering the batch files and what not, but it still hangs when it is completely disabled. I'm at a loss and if anyone can help me with this I'd greatly appreciate it!

  Read the article

• Exchange 2010 certificate errors

  - by Frederik Nielsen

  I have a problem with my newly setup Exchange environment for our hosted customers. First off, when configuring the outlook client, it gives a certificate warning although the certificate has been bought and setup. I am using a setup like this: autodiscover.CUSTOMERDOMAIN.TLD CNAME autodiscover.exchange.COMPANYDOMAIN.TLD (Companydomain is our company that hosts the exchange servers, customerdomain being the customers domain) Shouldn't that work? I know that Microsoft does something like that for Office365, but I really don't think they buy a certificate for every customer.. So I guess some redirection should be setup somehow - any guidance? Next thing: When we accept that error, and move on to actually starting Outlook, it states that the certificate is not valid for the RPC proxy server exchange.COMPANYDOMAIN.TLD - this domain is not right, as that domain is not included in the certificate. I would instead like this domain to be mail.exchange.COMPANYDOMAIN.TLD I tried to run this script setting both internal and external URL's to be the same, with no luck. Any guidance on this one? I am running Exchange 2010 SP2, with CAS, HT and MBX split up on 3 different servers.

  Read the article

• How can I setup nginx to serve virtualhosts with rails(unicorn/passenger) and php-fpm

  - by NewAlexandria

  I would like to serve multiple sites on one instance. I install nginx, php-fpm, and a rails app. I use sites like this to guide me. I configure php-fpm to listen to a local socket listen = /var/run/php-fpm/php-fpm.sock I configure ngnix with multiple hosts: include /etc/nginx/conf.d/*.conf I have several site php conf files like /etc/nginx/conf.d/site1.conf server { listen 80; server_name site1.com www.site1.com; root /var/www/site1; location / { index index.html index.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name; } } and rails site conf files like upstream rails { server 127.0.0.1:3000; } server { listen 80; server_name site2.com www.site2.com; root /var/www/site2; location / { proxy_pass http://rails; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header Host $host; proxy_set_header X-Url-Scheme $scheme; } } I have a unicorn rails server running via rails s -p 3000 Yet, no sites come up for either site1.com or site2.com. I can get to the rails site at www.site2.com:3000 What is wrong? I've spent 2 days (nearly 30hr) trying many different blogs, SO / SF questions, etc. Please share your insight or answer. edit 1: No log entries are created when I try to visit either site. It's like the requests never come in.

  Read the article

• High memory utilization with firebird + windows server 2008 r2

  - by chesterman

  i have a Windows Server 2008 R2 (64bit) running a 64bit installation of Firebird 2.1.4.18393_0 in a 4GB phisical server. After a while, the task manager show that all memory is used, but the sum of the memory of all process does not stack to the half of the memory. Unfortunally, it's start swapping. Using RAMMAP, i can see that my entire database file is mapped into the memory. This only occours in windows server 2008 r2 and windows 7 64 bit. i can use firebird 32 or 64bit installations, doesn't matter. How can i prevent this? Why this only occours in w2k8r2 and w7? tks in advance ** UPDATE Aparently, this occours by the use of all memory by the file system cache. The microsoft documentations explain that this WAS a issue in windows xp, 2k3, vista and 2k8, but it was solved in 7 and 2k8r2. also adds that this issue is more common in 64bit hosts. (http://support.microsoft.com/kb/976618) there are some tools (DynCache, setcache and the Get/SetSystemFileCacheSize system calls from windows API) that allows me to fix a upper limit to the memory usage by the fscache, but the documentation argues that i should not do this in w2k8r2 because it will severely impact on the overall system performance. anyway, i tried, the performance remained the same shit and the use of the page file remained, although there is now more the 1gb of free memory.

  Read the article

• How do I push my initial snapshot to a subscriber server in SQL Server 2000?

  - by Kev

  I'm configuring Transactional Replication using the Push model. The scenario is: The SQL Servers: SQL01 (publisher) and SQL02 (subscriber) - both running SQL 2000 SP4. Both servers are standalone (i.e. not domain members) Both servers have their FQDN and NETBIOS names in their HOSTS files I've managed to configure SQL01 to publish my database and configured a Push subscription for SQL02 using the Push New Subscription wizard and set the Distribution Agent to update the subscription continuously. On the Push Subscription wizard "Initialise Subscription" page I've selected "Yes, initialise the schema and data" and ticked the "Start the Snapshot Agent to begin the initialisation process immediately" option. All the required services are running (SQL Agent). When I complete the wizard and browse the Replication - Publications folder I can see my publication (blue book with arrow). The publication shows the Push subscription and its status is Pending. If I look in the c:\Program Files\Microsoft SQL Server\Mssql\Repldata folder I see a number of T-SQL scripts for each table e.g. Products.bcp, Products.sch, Products.idx. What should happen now? Should my replicated database now (magically) appear on the subscription server?

  Read the article

• Samba share will not connect (was working yesterday)

  - by David Gard

  I have a CentOS websver with a Samba share set up (\\webserver\websites). I was connected to this share just yesterday without issue, but today my Windows 8 PC will not connect to it. I've also tried making a connection from Windows 7 and Windows XP, all without success. I initially tried restarting my computer, but that did not work. I then tried restarting the Samba service on the webserver (service smb restart), and when that failed I restarted the webserver. All of that was to no avail, and I still cannot connect to the share. The webserver is contactable from my PC (and the others I tried), as the websites it hosts work fine and I'm able to Putty to the server. When connected to the webserver, I can see that Samba is running by using service smb status - service smb status smbd (pid 4685) is running... nmbd (pid 4688) is running... Can anyone please help me to get this share working? Here is my full Samba config (/etc/samba/smb.conf) - [global] workgroup = MYGROUP server string = Samba Server %v log file = /var/log/samba/log.%m max log size = 50 security = user encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 local master = no [websites] comment = Websites browseable = yes writable = yes path=/var/www/html/ valid users = dgard

  Read the article

• Apache Server Status page in port 8443

  - by batman

  I'm very new to apache. I tried to enable the server status page of apache. I added the status.conf and status.load to mods-enabled directory. I changed the config of apache2.conf to include all mods-enabled directory. This is the config of staus.conf: <IfModule mod_status.c> # # Allow server status reports generated by mod_status, # with the URL of http://servername/server-status # Uncomment and change the "192.0.2.0/24" to allow access from other hosts. # <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 ::1 # Allow from 192.0.2.0/24 </Location> # Keep track of extended status information for each request ExtendedStatus On # Determine if mod_status displays the first 63 characters of a request or # the last 63, assuming the request itself is greater than 63 chars. # Default: Off #SeeRequestTail On <IfModule mod_proxy.c> # Show Proxy LoadBalancer status in mod_status ProxyStatus On </IfModule> </IfModule> The default settings. I restarted my server. I'm redirecting all ports to 8443. Which in turn turns my requests to localhost:8443/server-status. Which does throw an 404 error. Are there any way to get around this? Thanks in advance.

  Read the article

• is a wildcard SSL the only option in this multiple VHOST/1IP setup?

  - by solsol

  I have a web app set up that needs the following SSL encryption: secure.myapp.com -> SSL www.myapp.com/login -> SSL www.myapp.com/signup -> SSL If I'm correct, I could run one SSL certificate for my whole www.myapp.com/* pages. The problem is that I have a subdomain called secure.myapp.com that either needs to be on a separate IP address to work with SSL. Right now I have one server, one public IP and a number of Virtual Hosts in apache to make this work. I'd rather not buy an expensive Wildcard SSL certificate to secure just one subdomain. What is your advice on this? If it IS the only solution any tips on getting a price worthy wildcard SSL cert is appreciated. I have read about SNI that allows the use of multiple SSL certs, but not all browsers (IE6!) support this. Since we are building a web app for the public, we cannot have IE6 to run on unencrypted connections. Thanks for you help

  Read the article

• Lots of strange IP addresses in my Windows Firewall logs. Concern?

  - by gmoore

  Was trying to debug a Samba sharing issue with Mac OS X so I turned on logging for my Windows Firewall. I didn't expect a lot of conections but the thing filled up quickly. Here's a sample: 2009-12-21 08:49:32 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56335 139 - - - - - - - - - 2009-12-21 08:49:33 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56337 139 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.73.242 1389 53 - - - - - - - - - 2009-12-21 08:50:02 CLOSE TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.71.226 60290 53 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:04 CLOSE TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:41 CLOSE UDP 192.168.0.3 192.168.0.4 137 50300 - - - - - - - - - I can pick out the local IP addresses (192.168.0.3 is my Windows XP machine, 192.169.0.4 is Mac OS X) as I debug the Samba issue. But some of the others resolve to Comcast (my ISP) and others resolve to weird hosts like van-dns.com and navisite.net. It doesn't look like any connection sent/received any bytes. I used the reference here: http://technet.microsoft.com/en-us/library/cc758040%28WS.10%29.aspx. Is it a cause for concern?

  Read the article

• OpenVPN access to a private network

  - by Gior312

  There are many similar topics about my issue, however I cannot figure out a solution for myself. There are three hosts. A without a routable address but with an Internet access. Server S with a routable Internet address and host B behind NAT in a private network. What I've managed to do is a OpenVPN connection between A and B via S. Everything works fine so far according to this manual VPN Setup What I want to do is to connect A to Bs private network 10.A.B.x I tried this manual but had no luck. So A has a vpn address 10.9.0.10, B's vpn address is 10.9.0.6 and B's private network is 10.20.20.0/24. When at the Server I try to make a route to Bs private network like this sudo route add 10.20.20.0 netmask 255.255.255.0 gw 10.9.0.6 dev tun0 it says "route: netmask 000000ff doesn't make sense with host route" but I don't know how to tell Server to look for a private network in a different way. Do you know how can I make it right ?

  Read the article

• DRBD stacked resources: recovering from failure

  - by Marcus Downing

  We're running a stacked four-node DRBD setup like this: A --> B | | v v C D This means three DRBD resources running across these four servers. Servers A and B are Xen hosts running VMs, while servers C and D are for backups. A is in the same datacentre as C. From server A to server C, in the first datacentre, using protocol B From server B to server D, in the second datacentre, using protocol B From server A to server B, different datacentres, stacked resource using protocol A First question: booting a stacked resource We haven't got any vital data running on this setup yet - we're still making sure it works first. This means simulating power cuts, network outages etc and seeing what steps we need to recover. When we pull the power out of server A, both resources go down; it attempts to bring them back up at next boot. However, it only succeeds at bringing up the lower-level resource, A-C. The stacked resource A-B doesn't even try to connect, presumably because it can't find the device until it's a connected primary on the lower level. So if anything goes wrong we need to manually log in and bring that resource up, then start the virtual machine on top of it. Second question: setting the primary of a stacked resource Our lower-level resources are configured so that the right one is considered primary: resource test-AC { on A { ... } on C { ... } startup { become-primary-on A; } } But I don't see any way to do the same with a stacked resource, as the following isn't a valid config: resource test-AB { stacked-on-top-of test-AC { ... } stacked-on-top-of test-BD { ... } startup { become-primary-on test-AC; } } This too means that recovering from a failure requires manual intervention. Is there no way to set the automatic primary for a stacked resource?

  Read the article

• SQL Server Subscriber Migration

  - by SuperCoolMoss

  We're currently have one way transaction replication from a SQL Server 2005 OLTP publisher/distrbituor to two subscribers (one SQL 2005 and the other SQL2008 R2). Replication security is via the SQL Agents' domain service account (the same account is used on all boxes). The SQL2008R2 subscriber is used for BI purposes and hosts a database that has a subset of the Production publisher database tables, with different security and indexes. We need to migrate this BI subscriber to a newer box with more performant hardware. The plan is as follows: Stop replicating to the BI box (continue replicating to the other subscriber). Backup all databases on the BI box (including system databases). Restore all databases (including master in single user mode) to the new BI box (this has SQL Server 2008R2 already installed). Take the old BI box off the network and shut it down. Rename and Re-IP the new BI box to be the same as the old box. Switch replication back on. Are there any flaws in this approach?

  Read the article

• Licensing SQL Server 2012 Reporting Services w/ SharePoint 2010

  - by Evan M.

  Here's my situation: I have 1 VM that is running SharePoint 2010 SP1. I have a different physical server that is running SQL Server 2008 R2 that hosts all the configuration and content database for SharePoint. Now, we want to start providing BI capabilities to our users with SharePoint and SQL Server. With it's new features, 2012 is the obvious way to go. To support this, I'm looking to build a new VM that will have SQL Server 2012 installed w/ Analysis services and SSIS, which will be the platform that gets our data from our Oracle databases, puts it in a warehouse hosted by the SQL 2012 instance, and is put into cubes. What's getting me about the platform is licensing for Reporting Services and PowerPivot. My plan was to install SSRS and PowerPivot on the current SharePoint server. But my understanding of the licensing means that instead of the new SQL server being licensed, I'd have to license both new server, and the SharePoint server. Conversely, I could install SharePoint onto the SQL server, and only have to get a second SP license, but then I'd have the added complexity of deploying a separated application server, and combines my data and application servers. Is my licensing understanding correct, or can I have SSRS and PowerPivot installed separately without incurring additional licensing costs?

  Read the article

• VMWare use of Gratuitous ARP REPLY

  - by trs80

  I have an ESXi cluster that hosts several Windows Server VMs and around 30 Windows workstation VMs. Packet captures show a high number of ARP replies of the form: -sender_ip: VM IP -sender_mac: VM virtual MAC -target_ip: 0.0.0.0 -target_mac: Switch interface MAC The specific addresses aren't really a concern -- they're all legitimate and we're not having any problems with communications (most of the questions surrounding GARP and VMWare have to do with ping issues, a problem we don't have). I'm looking for an explanation of the traffic pattern in an environment that functions as expected. So the question is why would I see a high number of unsolicited ARP replies? Is this a mechanism VMWare uses for some purpose? What is it? Is there an alternative? EDIT: Quick diagram: [esxi]--[switch vlan]--[inline IDS]--[fw]--(rest of network) The IDS is complaining about these unsolicited ARPs. Several IDS vendors trigger on ARP replies without a prior request, or for ARP replies that have a target IP of 0.0.0.0. The target MAC in these replies is the VLAN interface on the switch. Capture points: -The IDS grabs the offending packets -The FW can see the same ones -A VM on the ESXi host does not see these, although there is an ARP request for a specific IP on the ESXi host that has source_ip=0.0.0.0 and source_mac=[switch vlan interface]. I can't share the captures, unfortunately. Really I'm interested in finding out if this is normal for an ESXi deployment.

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

• How can I monitor VNC via Nagios?

  - by atroon

  I have a number of remote sites which have VNC running on a few computers for support purposes. They are (obviously) only available on our internal network. I am using Nagios to keep track of all the systems in the network and I want to have it check to make sure the VNC server is running on the appropriate hosts. There is a 'check_vnc' plugin available here but it relies on VNC Snapshot which I don't want to use. Certainly I could use it, but it adds more complexity and dependency, which I want to avoid. It seems simpler to just use check_tcp to make sure I get the proper response to a connection request for VNC, e.g. port 5900, send a connect string, get back framebuffer info. My real question, I suppose, is this: What is the 'proper' generic connect string for VNC (I use both UltraVNC and RealVNC) and what is the expected response? If it's really easier to use the VNC Snapshot and check_vnc, let me know. I just can't imagine that a string of text isn't easier, faster, and less bandwidth intensive to monitor.

  Read the article

• ping: unknown host google.com

  - by Tar

  Relevant output: /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 servers_ip_address server.2006scape.com server /etc/resolv.conf search 2006scape.com #Generated by NetworkManager nameserver 8.8.8.8 nameserver 8.8.4.4 Some stuff from tcpdump 07:46:28.795843 IP server_ip.42841 > 8.8.4.4.domain: 60253+ PTR? 87.127.104.87.in-addr.arpa. (44) 07:46:28.795980 IP server_ip.54001 > 8.8.4.4.domain: 7390+ PTR? 60.187.80.98.in-addr.arpa. (43) 07:46:28.804029 IP server_ip.59667 > 8.8.4.4.domain: 58876+ PTR? 134.154.161.72.in-addr.arpa. (45) 07:46:28.884171 IP server_ip.46255 > 8.8.4.4.domain: 63027+ PTR? 195.156.251.84.in-addr.arpa. (45) 07:46:28.884217 IP server_ip.35426 > 8.8.4.4.domain: 10538+ PTR? 118.3.182.166.in-addr.arpa. (44) 07:46:28.884253 IP server_ip.53635 > 8.8.4.4.domain: 29928+ PTR? 230.94.81.83.in-addr.arpa. (43) 07:46:28.884286 IP server_ip.45787 > 8.8.4.4.domain: 41151+ PTR? 18.32.223.121.in-addr.arpa. (44) 07:46:28.946045 IP server_ip.47246 > 8.8.4.4.domain: 43103+ PTR? 81.70.251.84.in-addr.arpa. (43) 07:46:28.946066 IP server_ip.33208 > 8.8.4.4.domain: 61117+ PTR? 69.170.184.71.in-addr.arpa. (44) Anyone have any input as to what is causing this?

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• Ubuntu server apt-get says "(-5 - No address associated with hostname)"

  - by Srini

  I have a ubuntu 12.04 server. Running sudo apt-get update on it produces errors like this: W: Failed to fetch http://au.archive.ubuntu.com/ubuntu/dists/precise-backports/main/binary-i386/Packages Something wicked happened resolving 'au.archive.ubuntu.com:http' (-5 - No address associated with hostname) I am able to ping all the other hosts on the network and also Google's DNS 8.8.8.8. But am unable to ping www.google.com. So, I'm guessing something is wrong with my DNS setup, but not sure what. I use static IP and my /etc/network/interfaces looks like this: auto eth0 iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.0.255 gateway 192.168.1.1 #dns-nameserver 203.12.160.35 203.12.160.36 #nameserver 203.12.160.35 203.12.160.36 My /etc/resolv.conf and /etc/resolvconf/resolv.conf.d/base are both empty and my /etc/resolvconf/resolv.conf.d/original says: nameserver 192.168.1.1 Any help would be greatly appreciated. P.S. I've googled it a bit and the common resolution is to switch to DHCP which I don't want to do since this is my home server. Thanks Srini

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

  - by Jamie G

  I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

  Read the article

• Why does apache httpd tell me that my name-based virtualhosts only works with SNI enabled browers (RFC 4366)

  - by Arlukin

  Why does apache give me this error message in my logs? Is it a false positive? [warn] Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I have recently upgraded from Centos 5.7 to 6.3, and by that to a newer httpd version. I have always made my ssl virtualhost configurations like below. Where all domains that share the same certificate (mostly/always wildcard certs) share the same ip. But never got this error message before (or have I, maybe I haven't looked to enough in my logs?) From what I have learned this should work without SNI (Server Name Indication) Here is relevant parts of my httpd.conf file. Without this VirtualHost I don't get the error message. NameVirtualHost 10.101.0.135:443 <VirtualHost 10.101.0.135:443> ServerName sub1.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost> <VirtualHost 10.101.0.135:443> ServerName sub2.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost>

  Read the article

• Host ::1 resolves to remote IP

  - by thebuckst0p

  /etc/hosts files usually have this line, ::1 localhost. I thought ::1 was the equivalent of 127.0.0.1/localhost, and from my reading it seems to be the IPv6 version. So I was using it in Apache for firewalling, "Allow from ::1" and it only allowed local. Then suddenly that stopped working, so I pinged ::1 and got a remote IP address. I tracerouted it and it went through my ISP, through some Microsoft server, then another half dozen steps of asterisks... I'm not sure why this would be (the remote IP), but it doesn't seem good. I grep'd my hard drive for the remote IP and it doesn't appear anywhere. Is this some indicator that I'm being hacked, or normal behavior? Maybe my IPv6 settings are wrong? (This is a brand new MacBookPro with Snow Leopard.) Any ideas about this would be great - what is ::1 supposed to be, why would it be remote, should I be worried, how do I get it back to localhost? Thank you!

  Read the article

• Cheap Solution for Routing a Toll Free Number to a Standard POTS Number

  - by VxJasonxV

  I do some technical work for an Internet Radio Show/Podcast, and need to fix something that has been broken for a while. The hosts have a Skype-In number to take listener calls, and for convenience sake, I bought and paid for a toll free number for a period of time. I used to use Asterlink for routing calls, but they folded and sent my number to OneBox, but they're ridiculously expensive by comparison. I'm looking for a cheap solution for this one simple task. Forward toll free calls to a skype-in number. The definition of cheap is as cheap or cheaper than Asterlink was. I paid something like $2 a month, and then the termination/call rate, which was a fraction of a sent for termination, and only whole cents after some serious time on the call. A $20 preload lasted me months at a time. I don't want to be upsold too, I want a simple web based management screen (CDR/stats are fun!), and obviously, it needs to be reliable. What vendors out there are you a fan of that solves this need?

  Read the article

• Does migrating 2 domain controllers between 2 datacentre requires both virtual machines to be shut down at the same time?

  - by Imagineer

  I was attempting to migrate 2 virtual machines that are domain controllers between 2 datacentres running ESX 3.5 and ESX 4.1. I was advised to shut down both domain controller at the same time during the migration process. This is to avoid USN Rollback and other replication issues. The following are the steps that I was planning to perform: 1. Shutdown both DC. 2. Copy both VMs files across to new datacentre using Veeam FastSCP (connection to both vCentre through IP address instead of hostname) 3. Power them up at new datacentre. 4. Configure Network interface/DNS/DHCP for both DCs in new datacentre I have tried to use Veeam FastSCP rather than VMware Standalone Converter is because its copying rather than converting. Someone also suggested that I use backup and restore app like Veeam backup and replication software. Sounds like a simple job, but after shutting down both DCs, the transfer rate using FastSCP is so slow registering only 1KB/s as oppose to the normal 1MB/s (or more). When that attempt to transfer failed, I tried to cold clone both DCs resulted in the both ESX hosts get disconnected. I have tried troubleshooting by referring to this - VMware KB - Diagnosing an ESX Server that is Disconnected or Not Responding in VirtualCenter It seems that the DNS being down is the caused of all unusual occurrence. The moment I powered up the DCs via VMware console command, the ESX host were able to connect to the vCentre again. How can I avoid such a pitfall again? Am I doing it correctly? Any help would be greatly appreciated! Thank you.

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >