Search Results

Search found 17569 results on 703 pages for 'computer intelligence'.

Page 238/703 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

  • Ubuntu 12.04 + Bluetooth problems with maintaining connection

    - by ifndefx
    I have an Apple Wireless Mouse, Apple Wireless Keyboard, Apple Wireless Trackpad, and a pair of headphones. All of these connect to the computer via a Bluetooth dongle. After several hours I've managed to get the devices paired (all except the headphones) with the computer. However, I'm facing a problem where a connection can't be maintained even with one device. I first started with the gnome bluetooth applet, this couldn't even pick up devices, so I installed blueman, and this at least detected the devices but it couldn't keep the connection going. Then i read somewhere to get hidd installed and use the command line using the mac address of the device (which I got from blueman) and this worked really well, the connection was stable, but there's still a couple of issues that I need help with: If I am to use hidd I need to execute this via terminal, which means for the keyboard and the mouse I need to have two of each. This doesn't make sense. I need the bluetooth daemon to have started with the devices picked up a lot earlier, and especially at grub bootloader. The mouse and the trackpad both work if i use hidd, however, I cannot get the right mouse to work nor the scroll wheel to work. The headphones don't work period, they don't work with any of the bluetooth applets, and with hidd either. When I use blueman aplet, it attempts to pair and states 'Authentication Rejected". The headphone is Phillips SHB9100. If someone can help me with this, I would be grateful.

    Read the article

  • Real time audio streaming

    - by Josh K
    I have a remote computer running OS X. I would like to stream the audio from the microphone input over the network so I can listen to it. Primarily I want to do this because I'm out of the office but still need to communicate with people there. I would like to use VLC, but am not fully aware of the options available. I tried SoundFly (as recommended by another answer) but this didn't seem to want to connect. At this point I should note that I'm using a VPN network to connect to the remote computer (using Hamachi). I can open up ports / etc fine though, so I should be able to do this. Alright, I found Nicecase which does exactly what I want but I would prefer to not have to shell out $40 for it.

    Read the article

  • Wired connection not working

    - by YokoBlac
    I am using a Acer Aspire One. Here is the Ubuntu Wiki Page about my computer. I have a working wireless connection however when I plug a cat5 (Ethernet) cable in the lights flicker on the computer, but then nothing happens. Output of iconfig: eth0 Link encap:Ethernet HWaddr 00:1e:68:96:1a:6b inet6 addr: fe80::21e:68ff:fe96:1a6b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2622 (2.6 KB) TX bytes:936 (936.0 B) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) wlan0 Link encap:Ethernet HWaddr 00:22:68:92:7f:36 inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:68ff:fe92:7f36/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5702 errors:0 dropped:0 overruns:0 frame:0 TX packets:5284 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4117327 (4.1 MB) TX bytes:936709 (936.7 KB) Any understanding of this output is greatly appreciated.

    Read the article

  • Need Directions to become a programmer [closed]

    - by Omin
    Before youguys go on about how there are many types of programmers, please read through the post. Long term goal: Develop my own software (company) Short term goal: Get a job that involves coding/programming Current status: Support Analyst (at a software company but does not involve any programming) with 40k salary, 3rd year computer engineering student I had everything figured out. I'm going to develop a 2D scrolling game for iphone or android, publish the app, sell a bunch, and then apply at a studios as a software developer. And then something hit me. I think I need to get a job that involes programming to learn as much as I can in the shortest time possible. So I got a phone interview at a fast growing start up software company, passed that no problem, but then had to take an online technical assessment. That failed miserably. I thought that if I could just present myself, show that I am hard working, positive attitude, eager to make self improvements, type of a guy, I could get the job. I was wrong. And now, I am lost. Im thinking of staying with my job until I find a new one as a programmer. I will be working, self studying, and trying to make this happen without finishing university. I forgot to mention that the online technical assessment was based on data structures/algorithms, OO design, runtime complexity. I was hoping that I could get some guidence. Should I be focusing on app development or study computer science fundamentals? I have a list of books I can be going through: Learning C# O'Reilly (I got interested in C# because of Unity3D and Mono), C# 5.0 in a Nutshell, Head First Design Patterns, Code Complete, Introduction to Algorithms, Programming Interviews Exposed, Cracking the Coding Interview, The Google Resume.

    Read the article

  • Wi-Fi or Bluetooth to USB converter

    - by yerzhik
    Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

    Read the article

  • Mount remote drive by port forwarding

    - by Anushka
    I have a windows 7 computer at home and a remote windows XP machine with an external USB drive attached to it. I would like to be able to copy files to and from home/the remote USB drive. The problem is that the only way of contacting the work computer is by first sshing into a different remote linux machine as there is a firewall that prevents direct internet connection. I can see two possible solutions but I don't know how to do them. Set up winscp using ssh port forwarding via the linux box so that I can copy to and from the two windows machines. I assume that I would need to run an ssh server on the XP machine as well to do this? Mounting the remote USB drive on the remote windows machine from the home XP machine via ssh port forwarding again via the linux box. Does anyone know how to do either solution?

    Read the article

  • Conflicts with MS Office temporary files when using Offline Folders on Vista

    - by Tambet
    We are using Offline Folders feature of Windows Vista to make files on network shares available when out of office. Mostly it is working, but every time I do a sync I get a lot of such errors: D500E7B8.tmp - A file was deleted on this computer and changed on the server while this computer was offline. There are hundreds of them. I always select all of them and choose resolution "Delete from both locations". But what is causing this and how can I avoid it? I suspect the reason is that we are using Debian and Samba (3.4.7) on our file server. I've been looking for some Samba options that would cure this, but with no success. I learned that probably the cause is, that both Word and Excel are using specific pattern to change files - they never change the original file, but instead always write a new temporary file and rename it to original file, when you click Save. This is documented here: http://support.microsoft.com/kb/211632/?FR=1.

    Read the article

  • Extremely poor WiFi reception on new desktop

    - by guy
    I just received a new desktop with a built-in WiFi card (Windows 7 Home Premium x64). However, I am only able to receive any WiFi signal when the computer is within 1-2 meters of a router. Even then, the signal is very weak (Windows 7 says it is "poor"). I have tried this with 2 different routers and see similar results. I have somewhere around a dozen other devices that can connect to both routers with greater signal strength (usually full strength) from much, much further away. When I tried calling support I was instructed to reinstall my drivers and attempt to change the WiFi channel of the router. Neither worked. I was then told that the problem was with my routers and that the computer was functioning normally and that it was certainly not a hardware problem. What would be the cause of this and is there anything I can do to fix it?

    Read the article

  • Change Scan-to-PC list names on Brother MFC-8890DW Printer

    - by dralezero
    I have two Brother MFC-8890DW. When scanning over the network, it shows a list of PCs (on the scanner display) to save to that have the software/drivers installed. Each PC is listed as the name of the employee for that computer. I have setup a third MFC-8890DW and installed on these computers. The list, however, is the computer name. Somehow it is possible to customize the name. Brother support did not know. I couldn't find anything in manuals. I thought I remember setting up those names before.

    Read the article

  • Config Time Service on Server 2008 DC using Group Policy Only

    - by Ed Fries
    I want to configure the Time Service using only GP in a Server 2008 R2 domain. I have created a GP as follows: Computer Config, Policies, Administrative Templates, System, Windows Time Policy: =Global Configuration Settings -Enabled w/ default settings. Computer Config, Policies, Administrative Templates, System, Windows Time Policy,Time Providers: =Configure Windows NTP Client -Enabled w/ default settings. =Enable Windows NTP Client -Enabled w/ default settings. =Enable Windows NTP Server -Enabled w/ default settings. The policy is linked, enforced and applied to Domain Controllers OU. The GP modeling results shows the policy is in effect on the DC (Single DC domain) and the DC is recognized as the PDC emulator. I have run gpupdate /force and logged off/on. The issue is that the DC shows the time source as internal. I understand I can force this at the cmd line using w32tm to set the peer but I would like to understand what is missing in the GP. The default NTP Client GP setting includes time.windows.com,0x9 as the source but it does not appear to be taking effect.

    Read the article

  • Terminal Server 2003 Gaining Time when Windows 7 Client Connects

    - by Matthew
    A Windows 2003 Terminal Server keeps time perfectly until a Windows 7 Home client connects. Then it gains time at a rate of several seconds per minute. The client connects through a firewall with only the RDP port open. The client runs the same apps on the terminal server that XP clients run with no issues. Using the Microsoft Terminal Server Client application copied to the W7 computer from an XPsp3 computer gives the same results. Current workaround is to sync time every 5 minutes. Any better ideas?

    Read the article

  • Step by Step: Remove/Sideline Preinstalled Windows 8, Install Ubuntu

    - by user207562
    I want Ubuntu as my primary/only operating system. Computer came with presumptive Pre-Installed Windows 8.(touch screen) Help. New Dell Inspiron 15r. Cannot install Ubuntu 12.04-03 or LTS. I need/request step by step instructions to remove Windows 8 or sideline Windows 8. (ie) BIOS settings I need to know: What to have; What settings; When to apply; Boot manager settings. UEFI. Etc. This should be easy, but I am mired in the Herpes that is Microsoft. I end up having a presumed dual boot that will not access Ubuntu. (ie) Step 1: Turn on computer. Step 2: F# to change ... to ... at Dell prompt... I want to use Ubuntu as my primary operating system or my only operating system.

    Read the article

  • Why is an Ext4 disk check so much faster than NTFS?

    - by Brendan Long
    I had a situation today where I restarted my computer and it said I needed to check the disk for consistancy. About 10 minutes later (at "1%" complete), I gave up and decided to let it run when I go home. For comparison, my home computer uses Ext4 for all of the partitions, and the disk checks (which run around once week) only take a couple seconds. I remember reading that having fast disk checks was a priority, but I don't know how they could do that. So, how does Ext4 do disk checks so fast? Is there some huge breakthrough in doing this after NTFS came out (~10 years ago)? Note: The NTFS disk is ~300 GB and the Ext4 disk is ~500 GB. Both are about half full.

    Read the article

  • Having trouble installing Bradcom STA driver

    - by user192881
    I just installed Ubuntu and love it so much, its so fast now. But I have a problem connecting to the internet. I checked and saw I have to install the driver Broadcom STA wireless driver but every time I do try to install it it says: Sorry, installation of this driver failed. Please have a look at the log files for details: /var/log/jockey.log I went to the terminal and copy and pasted the log file name. and when I did it, it said I have no permission to access this file. I checked on the forums that I have to be on a wired connection. So I plugged my laptop into my router and I got internet then tried to install the driver again. And it was loading then when it got to the end the same message popped up. Also I have one of those little USB router things you plug into the computer and it gives you internet I have been using that but its to slow. So I want to use the one in my computer but cant. Also I tried the command: sudo modprobe wl and when i type that command in it says: FATAL: Module wl not found Also I'm using Ubuntu 12.04

    Read the article

  • Windows doesn't recognise my USB key anymore (it used to work)

    - by dominicbri7
    I use my friend's USB flash drive (Corsair flash voyager 16gb) to transfer files from my laptop to my desktop computer. However, since a couple of days my laptop stopped recognizing the USB key.. while there is still no problems with all other computers. I use Windows 7 64 bits if that can help. I tried uninstalling the driver, rebooting and all those kind of tricks, but it won't work. When I connect it and open the "My computer" window, I see "Removable Disk (G:)" for a moment, then it disappears... then it reappears again and it keeps doing that periodically. I can't even right click then hit "Properties" because it disappears. As I recall, it DOES work on every other computers, I think it has to do with the driver but what can I do?

    Read the article

  • Cannot delete movie on iTunes for iPhone 4?

    - by Jian Lin
    I was on vacation and took some videos, and now the iPhone 4 memory is near full. So I tried to delete other experimental movies I made using Handbrake, so that I can take more video or photos, but if I plug the iPhone 4 into my Notebook computer, I can seem to delete it on iTunes? Maybe because the computer I sync with the iPhone 4 is at home (a desktop), but not with me on vacation. I can't delete it on iTunes, can't delete it on iPhone itself. I am stuck during the vacation, or is there a way to handle it?

    Read the article

  • Windows 7 RDP Fullscreen mode

    - by kubal5003
    I have a problem with remote desktop connection in Windows 7. When I connect to remote computer I would like to switch to fullscreen like I did in previous versions - just by clicking maximize. When I was in fullscreen mode and I moved the mouse to the upper border of the screen a nice bar appeared and I could minimize rdp or close it. In Windows seven when I click on the maximize button the window maximizes like a normal window - menu start/taskbar(whatever you call it) is still visible and because the resolution of the rdp client desktop is set like on the computer that I'm using it's not fully visible and scrollbars appear. That's really annoying. Can anyone tell me what to do? Is it a bug or maybe there is a "magic shortcut" that is poorly documented and does the trick? (I was trying to find it myself first ofcoz, but no result)

    Read the article

  • What would prevent a .BAT file from being run on a mapped drive?

    - by JBurace
    In WinXP SP3, I have a .BAT file on a mapped drive. When I try to run this .BAT file (or even right click-edit) it gives me: --------------------------- Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. --------------------------- OK --------------------------- This happens with any .BAT file, no matter what is within the file. If the file is on my local computer (like C:) it will run just fine. If someone else runs it from another computer (on the same mapped drive), it runs just fine. I have full permissions on the drive; I can edit/delete/save/write/create in that folder and/or .BAT file and I've ruled out permissions being the issue. It seems like a security prevention, but I can't tell what it would be. It would have to be something on my PC, but I don't use any 3rd party software. What would cause this error?

    Read the article

  • Use LAN to interface Synergy while having WiFi connected to internet

    - by freonix
    Similar question and solution I have LAN and WiFi connection, with the WiFi connected to internet and the LAN is simply connected via an Ethernet cable between two computers. I need to get Synergy working without compromising the WiFi internet. I've tried the solution above but couldn't seem to work. Both of the computer are running Windows XP. Even setting the LAN IP to static and under the same subnet doesn't seem to work. Anyone with similar situation and got Synergy to work? edit : Refined the question for clarity. Also, the computer are able to ping each other. Remote desktop can be accessed as well. I suspect the problem lies in Synergy's configuration.

    Read the article

  • How to fix Asus Eee PC 900 startup issues after failure?

    - by EBrown
    My Asus Eee PC 900 shows no signs of life. I push the power button and get no response from anything. No lights, no power, no boot-up screen. It has been like this since I received it from a friend. I asked her what happened and she said that smoke came from the keyboard, it shut down and hasnt turned on since. I have tried removing and cleaning the RAM, the computer charger still connects and works, but the battery receives no charge and the computer won't power on. Any ideas as to what is going on?

    Read the article

  • Can't connect to IIS7 on one of my machines

    I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

    Read the article

  • Can I use the same machine as a client and server for SSH?

    - by achraf
    For development tests, I need to setup an SFTP server. So I want to know if it's possible to use the same machine as the client and the server. I tried and I keep getting this error: > Permission denied (publickey). > Connection closed and by running ssh -v agharroud@localhost i get : > OpenSSH_3.8.1p1,OpenSSL 0.9.7d 17 Mar > debug1: Reading configuration data /etc/ssh_config > debug1: Connecting to localhost [127.0.0.1] port 22. > debug1: Connection established. > debug1: identity file /home/agharroud/.ssh/identity type -1 > debug1: identity file /home/agharroud/.ssh/id_rsa type 1 > debug1: identity file /home/agharroud/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1 > debug1: match: OpenSSH_3.8.1p1 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex:server->client aes128-cbc hmac-md5 none > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'localhost' is known and matches the RSA host key. > debug1: Found key in /home/agharroud/.ssh/known_hosts:1 > debug1: ssh_rsa_verify: signature correct > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug1: SSH2_MSG_SERVICE_ACCEPT > received > > ****USAGE WARNING**** > > This is a private computer system. This computer system, including all > related equipment, networks, and network devices (specifically > including Internet access) are provided only for authorized use. This > computer system may be monitored for all lawful purposes, including to > ensure that its use is authorized, for management of the system, to > facilitate protection against unauthorized access, and to verify > security procedures, survivability, and operational security. Monitoring > includes active attacks by authorized entities to test or verify the > security of this system. During monitoring, information may be > examined, recorded, copied and used for authorized purposes. All > information, including personal information, placed or sent over this > system may be monitored. > > Use of this computer system, authorized or unauthorized, > constitutes consent to monitoring of this system. Unauthorized use may > subject you to criminal prosecution. Evidence of unauthorized use collected > during monitoring may be used for administrative, criminal, or other > adverse action. Use of this system constitutes consent to monitoring for > these purposes. > > debug1: Authentications that can continue: publickey > debug1: Next authentication method: publickey > debug1: Trying private key:/home/agharroud/.ssh/identity > debug1: Offering public key:/home/agharroud/.ssh/id_rsa > debug1:Authentications that can continue:publickey > debug1: Trying private key:/home/agharroud/.ssh/id_dsa > debug1: No more authentication methods to try. > Permission denied (publickey). Any ideas about the problem ? thanks !

    Read the article

  • Empty DVD Drive indicates it has music in it (CDFS)

    - by Amado Colberg
    I have a Windows 7, 64 bit computer with a Blu-ray DVD drive. When I first start the computer, the DVD drive indicates it has music in it, but it is empty. If I put a CD in it, it will not Autoplay. But, if I open the drive and close it again, it will Autoplay and will no longer act as if it has a music CD in it. I've checked the drive with Plextor Utilities and it says it is working OK. I would appreciate any help with this.

    Read the article

  • Cannot fix induced 0x7b error on XP

    - by Malfist
    I'm writing a tool that will automagically fix the STOP 0x7B error that occurs when windows cannot access the hard drive due to driver issues (usually). I've wrote a tool that does everything the Knowledge Base article says to do. But it's not working. I'm inducing the issue by changing the bios SATA controller to AHCI, then moving it to another computer and updating it's registry. When I move it back to the other computer, nothing new happens. Can someone tell me what more I need to do?

    Read the article

  • OS X: How to create a user account with access to the applications that she has installed only.

    - by pmurillo
    Till now, I've been the sole and proud owner of an iMac. I've always logged in as an administrator and I've also installed a bunch of software following the standard procedure of dragging and dropping it into the Applications folder. This is about to change, as sharing it with a friend makes a lot of sense now that I only have time to use the computer in the mornings, and she can only use it at nights. I thought this was going to be really easy: Just create a user account for her and that's all, I thought. Unfortunately, this is not the case. When she logins into the computer using her username and password, she has access to the same applications I've installed. Even the same applications that I setup to automatically start when I login start for her when she does. How can I setup a user that has only access to the applications that she has installed, but none of the ones installed by other users? Many thanks

    Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >