Search Results

Search found 8473 results on 339 pages for 'vodoo boot'.

Page 238/339 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

• Always on VPN connection

  - by greg

  I have a working VPN connection. Works like a dream. What isn't working though, is the 'Connect Automatically' option in the Network Connections Manager Panel. It never connects automatically, not at boot, and not after disconnect. I'm not quite sure what that option is for. And I'll get disconnected from the VPN with no warning whatsoever. Is there a way to make sure my computer only connects to the internet through a VPN? So that if the VPN connection isn't established, my computer can't reach the internet. And is there a way to get ubuntu to attempt to reconnect to the VPN automatically if for some reason the connection drops?

  Read the article

• After Upgrading to 12.04 the Kernel won't Initiate

  - by Jeff

  I had 11.10 and tried to upgrade recently, via the installer pop-up reminder. Afterwards it would not boot, citing an issue with the kernel. So I've setup a 12.04 installation USB, which appears to work fine. The problem is it doesn't provide an upgrade option, just format and install or install alongside the current broken kernel. I believe I should be able to still get the information from the broken OS after installing alongside, but if there is a way to fix this more directly that would be preferable.

  Read the article

• How Does Windows Confirm Wi-Fi Access and Whether Hot Spot Authentication Is Necessary?

  - by Jason Fitzpatrick

  Windows is quite adept at telling you if you have a properly functioning Internet connection, but how exactly does it do so? Digging into how Windows handles the problem offers insight into Windows connectivity messages. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere

  Read the article

• Ubuntu 12.10 Laptop temperature

  - by romi

  I'm using a laptop having dedicated graphics card with Ubuntu and Windows 7 dual boot. The windows 7 idle temperature for cpu is 51C average and gpu is 46-48.5C, and when in load Cpu temp varies between 55-61C, and GPU 49-51 MAX. But in ubuntu idle temp CPU: 54c Gpu(ati radeon,proprietary driver installed): 50C and on load cpu: 58-69C gpu:53C max. Is it normal? If not is there any solution? Note that i'm using jupiter,latest graphics driver, grub tweaks etc.

  Read the article

• Battery issues on Dell Inspiron XPS14z Ultrabook

  - by querolus

  I'm new in the Ubuntu world. I just bought a Dell Inspiron XPS 14z Ultrabook and installed Ubuntu to dual boot with Windows thanks to the Ubuntu Secured Remix package. Everything works fine except the battery. I have, at most, 1h 30' battery life. With windows it can last more than 3h. Moreover, and I guess it's related to the battery issues, the fan is constantly running at high speed while it does not when working with windows. Do you know where can be the problem?

  Read the article

• Suddenly today, no HDMI on both Ubuntu 12.04 and Windows 7. What is HDA driver?

  - by Mike

  In the past, I just plug in hdmi, then boot laptop, and I have display on tv. Today my tv reads as "No Signal". When I go into "sound" on dashboard, there is No HDMI option. I don't understand what could have changed in the past few days. I also have Windows 7 on this machine, and I have same issue on there as well. In Ubuntu I scanned for drivers, and it asked if I wanted to activate HDA driver for DKMS. I'm not sure what that is. I googled and it looks like an audio driver. In Windows, Its says driver is up to date.

  Read the article

• Latest alestic ec2 Ubuntu instance seems broken

  - by Kave

  I am using alestic.com ec2 Ubuntu instances now for some time and never had a problem with. Today I created a new Ubuntu 12.04 LTS Precise EBS boot on US-east-1, seems to be a bad build. While doing a sudo apt-get update it breaks and says: W: Failed to fetch bzip2:/var/lib/apt/lists/partial/us-east-1.ec2.archive.ubuntu.com_ubuntu_dists_precise-updates_main_source_Sources Hash Sum mismatch This is on a fresh instance. So I recon something went wrong when creating it. What can be done to fix it?

  Read the article

• Cable connection takes a lot to establish

  - by user162237

  I've just installed Xubuntu on my computer. It's all OK, but I have a problem with the internet connection: when I boot the PC and I login into Xubuntu it says to me "Cable connection disconnected" or "No cable connection". After a while (like 40 seconds) it connects to the internet and then I'm able to surf the net. I was wondering: why it takes so long to establish a connection? I had no problems of this kind on Windows or other distributions. EDIT: here are some outputs: http://pastebin.com/8nWFC5BV

  Read the article

• Not able to create Live CD

  - by Jagannath Harati

  I downloaded 12.04.1 on a Windows 7 machine. I burnt a DVD from the ISO image using Windows Disc Image Burner. I had 'verify disc' on. The disc was created successfully with no errors. I was not able to use this disc for installing Ubuntu on another Windows 7 machine. I do not get the Welcome Screen on booting. I find that on the disc I burnt, I do not find bin, disc tree, programs directories and cdromupgrade, start.*, ubuntu* files. I found the boot directory and WUBI executable file. I tried downloading several times with the same result. I had similar problem earlier with 11.04. Can you please let me where the problem is?

  Read the article

• GRUB install error

  - by Rohit

  Whenever I try to install Ubuntu, I get a fatal error that reads: 'Executing'grub-install /dev/sda' failed. This is a fatal error.' Its the same as this, but my graphics appear to be running fine. Also, I'm a complete novice at this and really need simple instructions to understand what I'm doing. I've tried booting from a LiveCD and a USB stick. I don't want to dual boot it because its an old computer that I erased XP and plan on only using Linux on it. When I used a USB stick and set the persistent file storage high, I was able to run it, but only as long as the flash drive was plugged in.

  Read the article

• Do Nvidia's drivers work in 12.10?

  - by Pratyush Nalam

  I recently upgraded to 12.10 and was just checking for proprietary drivers to be installed. I found this in software sources When I enabled Nvidia binary Xorg driver, unity disappears along with the launcher and everything. I just have the wallpaper. I did manage to open the terminal and open software sources and select the nouveau display driver which fixed it. Question is how to enable NVIDIA binary Xorg driver and have everything working? Hardware: Apple MacBook Pro 9,1 Mid 2012 15 inch non-retina. NVIDIA GeForce GT650M EDIT: I tried the solution here. And now, when I boot into Ubuntu, I get a blinking cursor. That's all! No tty1, nothing. help !!

  Read the article

• Trouble with Ubuntu 12.10 install/evaluation

  - by Mike H

  I am trying to install Ubuntu 12.10 onto my Compaq Presario SR1215CL. I downloaded ubuntu-12.10-desktop-i386.iso file using BitTorrent and burned it to a blank DVD-RW. When I boot the computer with the Live Disk in the disk tray I am able to get to the Welcome screen. If I click on "Try Ubuntu" I am left at a blank screen except for the desktop background. There are no menus, toolbars, icons, etc. If I press Ctrl+Alt+Delete at this stage I am able to log out of the Live Session, but am unable to log back in. If I click on "Install Ubuntu" instead, I am able to proceed fairly far into the installation process, but eventually it quits and drops me to the same blank screen as above. I'm not sure at which stage the installer quits, but it does ask me to identify the issue and solve the problem myself from inside the Live Session, which doesn't work. Does anyone have some suggestions on how to get Ubuntu installed and working?

  Read the article

• How can I disable the prefetch cache?

  - by Oli

  I run a few Ubuntu servers that have a load of django sites running on them. The sites and the httpd start at boot and after that (apart from me SSHing in to update it or using bzr to update websites) nothing else gets run on it. At the moment over half the ram is allocated as cache. This isn't a problem because cache usually makes space or a little bit of it slips into swap (again, this doesn't really bother me) but I don't see the need for it. Is there a quick way to disable the cache? This is more of an experiment than anything else so it would be handy to know how to turn it back on again.

  Read the article

• Ubuntu 12.04 keeps rebooting after changing video settings

  - by ScottJShea

  In a pinch I had to install Ubuntu 12.04 on an HP Pavilion g6. I was not fond of the 1024 x 7678 resolution so after investigating and finding I had the intel chipset I set the below in the grub file: GRUB_GFXMODE=1366x768x32 GRUB_GFXPAYLOAD_LINUX=1366x768x32 This did not work. The system just keeps rebooting as nauseum. I powered down, inserted my Ubuntu Install USB, powered up, edited the Grub file on the disk (made sure it was the disk and not the Grub for the USB stick). Powered off and tried booting up again. Same thing. So: As a noob am I missing something in the boot to allow me into a recovery mode? (I cannot seem to get to the Grub menu) If not is there a way I can recover from this? UPDATE: Holding down the shift key after BIOS gets "GRUB Loading..." and then a reboot

  Read the article

• Fresh install of 12.04 Kernel panic

  - by user70260

  I am attempting to install Ubuntu 12.04 on my computer. After the Ubuntu splash screen, the computer throws up this error: sr 2:0:1:0: [sr0] Unhandled error code Kernel panic - not syncing: Attempted to kill init! PID: 1, comm: run-init Not Tainted 3.2.0-23-generic #36-Ubuntu The computer hardware is as follows: Core 2 quad 9400, 8gb RAM, GTX 275, 3 Mech HD, 2 SSD, Win 7 install. I would like to dual boot Ubuntu on this computer if possible. I did try placing this disk in my laptop and booted successfully which leads me to believe the fault lies with the desktop. Under windows all hardware seems to work ok. Any ideas?

  Read the article

• 12.04 Server- No Such Partition After Adding HDD

  - by Mark

  12.04 server installed. Physically added a 1TB drive to system and I'm now getting: GRUB loading. error: no such partition. grub rescue> Any thoughts/suggestions? Mark EDIT: Once I create a partition on the new drive (with GParted from LiveCD), I get a blinking cursor at boot and nothing else. EDIT: Unplugged first drive and tried to install on 2nd (1TB v. 120GB). When creating partition I get Incorrect metadata area header checksum in virtual console(f4)

  Read the article

• Google60 Emulates Search Engine Querying with 1960s Technology

  - by Jason Fitzpatrick

  Google60 is a novel little project that mimics the interface of a 1960s-era computer and mashes it up with modern Google search queries. Take it for a spin; you’ll never appreciate the speed of even the slowest modern browser more. While playing with the actual project is enjoyable, make sure to check out the project notes below the interface for an interesting look at design choices and emulating an old machine. Google60 [via Unpluggd] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

• The field for entering password freeze if no text is enter quickly after i install cinnamon on 12.04

  - by user109162

  Iam a total newbie to Ubuntu . I installed Cinnamon through terminal . The problem is that when i boot up, if i don't enter the password before 1 or 2 minutes the password field will freeze and won't accept any text inputs.The problem was most likely caused by Cinnamon because i guess the problem started after i tried to install some Cinnamon extensions. Please answer in non-technical way as far as possible. I will never go back to Windows whatever be the outcome. Help me stay on to Ubuntu.

  Read the article

• Disable automatic starting of sshd?

  - by b.long

  Simple question here; what's the correct way to stop the sshd service from starting when the OS boots ? I'm not sure if this answer is correct, so I'm hoping some guru(s) can help me out! What I'd like is a configuration that (after boot) allows me to start the service using sudo service ssh start when necessary. Version info: me@home:~$ ssh -V OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 me@home:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise

  Read the article

• Asus 1001P freezes after chaging network settings

  - by auntiquarian

  I'm running Ubuntu 11.04 on a Asus PC 1001P in a dual boot environment with XP. All has been running fine for several weeks, but: I've just changed ISP (from Tiscali to BT), and had already sorted out connection, registration, etc. on a Dell laptop. On the Asus I went into Ubuntu to alter the wireless network details (i.e. selected the new network, and entered the password). Ubuntu immediately started running slowly, and after rebooting it now freezes when it gets to the Ubuntu logo and gets no further. Please help, lovely Ubuntu experts.

  Read the article

• Ubuntu 12.10 WiFi Problems

  - by Sean Webber

  I have a 32 bit machine running Ubuntu 12.10 with WiFi on it. I have a WPA2 network at home, but if I leave the USB Adapter plugged in while it boots, it infinitely keeps asking for the network password but never connects. If I plug it in after boot, it will connect but then I can't access ANYTHING on the LAN or Internet because "the DNS servers are unreachable". Now, if I leave the computer on a while, I get lucky sometimes and it MAGICALLY decides to connect for a little bit, lock the machine though and the Internet's gone again. The weirdest thing, is when I am connected but can't get to the internet, I do a netstat or ifconfig wlan0, I do have an IP address and everything. It says I'm connected but its not. I have a Realtek RTL8188CU USB adapter.

  Read the article

• /etc/crypttab not working

  - by Jeremy Stein

  I used the Disk Utility to create an encrypted volume on an external drive. When I click the Unlock Volume button in that program, it mounts the drive for me. Now, I want to automate this process so that it will happen at boot-up. When I run sudo cryptsetup luksUUID /dev/sdb1, I get this: ca709269-1e3e-4e9e-9e08-7248f0e6c5a6 So, I create /etc/crypttab like this: backup_drive UUID=ca709269-1e3e-4e9e-9e08-7248f0e6c5a6 none And I added this line to /etc/fstab: /dev/mapper/backup_drive /mnt/backup ext3 default 0 2 When I reboot, Ubuntu tells me that the device is not available to map, so I tell it to skip it. It appears that the /etc/crypttab is not getting run correctly. How can I debug this?

  Read the article

• two windows loader in grub

  - by Lorenzo

  i'm facing a strange problem about which - googling- i didn't find any solution. This is the issue. I've restored windows 7 trught its hidden partition then i installed kubuntu 12.04 which didn't installed the grub loader. Hence via the same usb-live i used boot-repair which have found all the system that are: kubuntu + its recovery mode windows 7 /dev/sda1 windows 7 /dev/sda2 windows 7 recovery I don't know why i have got 2 windows loader, but they seem (to me) to load the same system. I tryied to see what is there written in the grub.cfg and it seems that the "root" directory for the two system is different eventhought when i load from sda1 i got "Avvio windows" (italian laguange that i choosed) and on sda2 i got "start windows" in the english language when the splash screen load. Can you PLEASE help me removing one of the two entry? i can not really see them, i want only one but i don't know how to act.. Thank you very much indeed. Lorenzo

  Read the article

• Rebooting yes, Shutdown no

  - by Chiotis Leonidas

  Hello everyone and thanks in advance. I am new in Ubuntu and have the 12.04 version dual boot with Windows XP. I have the following problem. The laptop can reboot using the reboot option from the menu but it cannot shut down. It starts shutting down, the dots appear but then it freezes and does not turn off. Sometimes it shuts down normally (usually just after an update) but then it loses that capability again. Some strange things, I noticed that when the dots freeze, the USB mouse loses power, BUT the usb-powered cooling pad continues to work The only Fn shortcuts that work all the time are the Volume up, down and mute, BUT sometimes when the other Fn combinations (screen-off etc) work the computer shuts down normally I searched a lot on my own, please help.

  Read the article

• Not enough space left in the hard drive. How to proceed?

  - by jimbobjgr

  Where do I begin... I can hardly do anything on Ubuntu 12.04. I am very close to removing and returning to Windows. First I could not load it because the graphics appeared to be running low but somehow that stopped happening and I could log on. Now I can not download anything or I get this message Cannot write: No space left on device. I tried trouble shooting this issue but every time I try and fix the problem I am blocked by this message E: Write error - write (28: No space left on device) E: Can't mmap an empty file E: Failed to truncate file - ftruncate (9: Bad file descriptor) E: The package lists or status file could not be parsed or opened. $ OLD=$(ls -tr /boot/vmlinuz-* | head -n -2 | cut -d- -f2- | awk '{print "linux-image-" $0}') Ubuntu is also running incredibly slow and I cant get anything done! Please help this is driving me mad!

  Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >