Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 239/330 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• upload an m4a file in flex, saving it as a blob in oracle, and retrieving metadata info from it

  - by Angus

  Hi, I currently have a FileUpload.mxml component that uploads a .m4a to an oracle database, retrieves metadata from the file and saves the metadata info in the database. to acheive this I use FileReference() and set up, amoung others, the dispatcher.addEventListener(DataEvent.UPLOAD_COMPLETE_DATA, completeHandler); So the file is posted to a php file which saves it as a blob. Once the blob is saved, the script sends a message back to flex to dispatch the upload_complete_data event. In the complete handler, the metadata is then retreived by reading the value back from the database into a custom made meta data reader. The metadata info is then saved via flex. This seems a little long winded. Has anyone else successfully achieved this using a different way?

  Read the article

• Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

  - by Kris

  I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

  Read the article

• Bypass OpenID. Please give us a simple login form.

  - by Florin

  Can I kindly ask that we're allowed to login without the OpenID nonsense? This system is so popular that stack-overflow is the only place that I use it. If it is the policy of stack-overflow to prevent people to login, they've succeeded. I am a passive reader. For some reasons, I really don't like the idea of having one Id for all sites. To me, this system is dead in the water. Unless used within organizations I will never use it. Of course, until the government decides to reign us all in. Will you give them a hand? Until then, can we simply have a login form as in 1995? Thank you for your consideration.

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by user7651

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• Aggregating and Displaying Multiple Feeds

  - by Keith

  I want to pull feeds for multiple online services (e.g. Tumblr, Google Reader, Delicious) and aggregate them into a single feed to display on my site. I know of services like YQL or Yahoo! Pipes which will combine feeds, but sometimes those services are too slow. I was wondering what the best method would be if I wanted to run this on my own server (using JavaScript or PHP)? Ideally, I would cache the results to cut down on processing.

  Read the article

• Can't Open Up Event Viewer

  - by Erik W

  I just installed a large backlog of Windows Updates (I have Windows 7 Ultimate 64-bit) and now a handful of programs are acting strangely (not opening, crashing, etc) I went to try to diagnose the program using the Event Viewer, but when I open it up I get the error "Microsoft Management Console has Stopped Working" immediately after I double-click on the icon. Is there any way for me to figure out what is going wrong? I have another Windows 7 PC, that I tried to remotely view the logs from, but I got the error "The RPC Server is Unavailable". I'd like to start up the service, but oh wait, I can't open anything in the "Administrative Tools". I'd like not to re-install Windows, as I had just done so a couple months ago after a Windows Update jacked up my graphics card drivers.

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• PC won't post after replacing mobo

  - by Dan

  I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• Why are my hardware tabs disabled for my VMWare player image?

  - by djangofan

  I just installed a Ubuntu 10.10 image on VMWare player and after I finished installing I was messing with the hardware settings and I did the following: 1. disabled the floppy device 2. changed the CDRom to "use system cdrom" 3. tried to enable the VMWare tools but it complained that the vm was in "Easy Install" mode After I fiddled with the VM now my floppy and 2 CD rom devices as well as sound card and USB settings are all disabled in the VM hardware settings. Any idea on why this occurred and how to fix it?

  Read the article

• Running a program causes everything afterwards to minimize

  - by Xitcod13

  I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. Is there any way to fix this? What can cause such a strange behavior?? I recently installed the internet driver. Hopefully that is not the problem because this is the third internet card for this computer. I have noticed that my internet is messing up as well.

  Read the article

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• How does one go about fixing a pixelation issue?

  - by Tyler

  I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

  Read the article

• Frame rate upsampling codec/player/software?

  - by djechelon

  Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

  Read the article

• Monitor "forgot" its native resolution overnight

  - by Ben

  I have: Hanns G HW173A monitor NVIDIA GTX 460 graphics card Windows XP SP3. It was working. Suddenly overnight I can no longer use my monitor's native resolution of 1440x900. It's not listed, and if I force it it only shows part of the screen. The only resolution that seems to fit the whole screen is now 1024x768. I have tried reinstalling the NVIDIA drivers as well as disabling and enabling the monitor drivers (for windows XP the monitor uses the microsoft "default monitor" drivers - this is what Hanns G says on their website too). Any ideas? Thanks very much.

  Read the article

• Server 2008 R2 repair install

  - by Kyle

  Is it possible to do a repair install on a server 2008 R2 Enterprise machine like we used to be able to do on 2003? I need to reinstall on a remote server and don't have a driver cd in the drive just a copy of server. I am worried that when it comes back up I won't have any drivers for the NIC. I have a iDRAC but can't seem to send files over the DRAC to the machine. Sadly this server doesn't have an SD card in the DRAC with the files I need. I welcome any suggestions if the repair is not possible. Our IDC is in Chicago and they are buried under snow so I won't be able to get another admin on site until at least tomorrow.

  Read the article

• How to route local traffic over switch?

  - by Franz Kafka

  I'm just cabled up at home but haven't got any way of verifying that gigabit speed can be reached. As I've only got one laptop with one network card, one cable, and one switch, I'm kind of stuck. I'm using a tool that you can start as a server or as a client to send data from one box to another. I would like to send and receive on the same Windows box. I guess if I use my network local IP address, my Windows 8.1 PC will just route traffic internally. Is there some way of forcing the traffic to go to the switch and back again?

  Read the article

• CMD file time not always matching windows explorer file time

  - by skyrail

  I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• does a switch idiom make sense in this case?

  - by the ungoverned

  I'm writing a parser/handler for a network protocol; the protocol is predefined and I am writing an adapter, in python. In the process of decoding the incoming messages, I've been considering using the idiom I've seen suggested elsewhere for "switch" in python: use a hash table whose keys are the field you want to match on (a string in this case) and whose values are callable expressions: self.switchTab = { 'N': self.handleN, 'M': self.handleM, ... } Where self.handleN, etc., are methods on the current class. The actual switch looks like this: self.switchTab[selector]() According to some profiling I've done with cProfile (and Python 2.5.2) this is actually a little bit faster than a chain of if..elif... statements. My question is, do folks think this is a reasonable choice? I can't imagine that re-framing this in terms of objects and polymorphism would be as fast, and I think the code looks reasonably clear to a reader.

  Read the article

• blue screen of death - softwares for find and fix on damaged drive with another operating system

  - by SilverLight

  last night i got a virus in my windows 7. after reset my computer i got blue screen of death like below : my windows 7 minidump for finding the problem i have another operating system in my computer (windows xp). is there a software for find and fix the problem in windows 7 drive? how can i see event logs of windows 7 with windows xp? edit : Last known good gonfiguration or safe mode in boot menu did n't help and still have the problem. i have nvidia graphic card on my system.but how can i fix it's driver from windows xp and i don't know it's in relationship with that bsod or not?

  Read the article

• Accessing variables of an object of a particular class through a different class within the construc

  - by Haxed

  class Student { private String name; public Student(String name){ this.name = name; } public String getName(){ return name; } } class StudentServer { public StudentServer(){ Student[] s = new Student[30]; s[0] = new Student("Nick"); System.out.println(s[0]); // LINE 01:But this compiles, although prints junk System.out.println(s[0].getName()); // LINE 02:I get a error called cannot find symbol } public static void main(){ new StudentServer(); } } Hey, there are two lines, I want the reader to focus on, the first line prints junk as usual, but suprizingly the second one gives me an error. Do you know why ? Many Thanks

  Read the article

• Can't run monitor at native 1080p resolution on Windows 7

  - by Rex

  I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >