Search Results

Search found 22267 results on 891 pages for 'org mode'.

Page 239/891 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• How to tune system settings for mongoDB on Linux?

  - by jsh

  Trying to squeeze a lot out of one question here -- please bear with me. Although the MongoDB man pages make several useful recommendations about system settings like ulimit (http://docs.mongodb.org/manual/reference/ulimit/), and other production factors (http://docs.mongodb.org/manual/administration/production-notes/) they seem mysteriously silent on things like virtual memory and swap settings. The closest we get to a hint is that "...the operating system’s virtual memory subsystem manages MongoDB’s memory..." (http://docs.mongodb.org/manual/faq/fundamentals/#does-mongodb-require-a-lot-of-ram). Running the same job - high writes and high reads on about 10,000,000 records in a single collection -- on my 4-processor, 4GB RAM macbook and an 8-core ubuntu box with 64GB RAM I saw dramatically WORSE read performance on the linux box with factory settings, and could hear the disk constantly spinning, indicating high I/O and presumably swapping. Yes, other things were happening on the box, but there was plenty of free RAM, disk space, etc.; furthermore, I did not see evidence that Mongo was expanding to take advantage of all that free RAM as it is touted to do. Linux box default settings were as follows: vm.swappiness =60 vm.dirty_background_ratio = 10 vm.dirty_ratio = 20 vm.dirty_expire_centisecs =3000 vm.dirty_writeback_centisecs=500 I hazarded some guesses looking at docs and blogs for other types of databases (Oracle, MYSQL, etc.), experimented, and adjusted as below. vm.swappiness=10 vm.dirty_background_ratio=5 vm.dirty_ratio=5 vm.dirty_writeback_centisecs=250 vm.dirty_expire_centisecs=500 I saw some immediate apparent improvements in read time. However, when I ran my test jobs again, read performance continued to be painfully sluggish during heavy writes. Then, I REBUILT the collection from an available data source - and suddenly I can read at 1ms or less per record WHILE doing the write job! So the question is really two-fold: 1) What are appropriate VM settings for MongoDB on Linux? 2) (bonus) Does Mongo do some checking or optimization with the OS while data is being built? In other words, if I have built a large data set with suboptimal VM or I/O settings, does Mongo make assumptions during the memory-mapping process that will fail to take advantage of optimizations down the road? Obviously I don't fully grok memory mapping under the hood (I was hoping I wouldn't have to). Any help appreciated...thanks! -j

  Read the article

• Printer offline until spooler service is restarted multiple times

  - by Zian Choy

  When I try to print from my ThinkPad to a printer shared through a Windows 7 Homegroup hosted by a desktop computer, I often have to restart the Print Spooler service several times before the job will go through. In particular, this problem occurs when the desktop is in sleep mode when the print job is started and then brought out of sleep mode after the print job has been kicked off. Both computers are running Windows 7 32-bit edition with the latest patches. I have tried the following with no improvement: SNMP registry hack (see MS KB for details) Following the instructions in a blog post entitled "Sharing Printers on Vista 64-bit" Looking at Printer offline until spooler service is restarted

  Read the article

• What is the command to use to put your computer to sleep (not hibernate)?

  - by airrick

  I want to put my windows pc (win7) into a sleep state via command line (so i can bind to macro button on keyboard). The power button on the PC is setup to but the computer to sleep (but it's down on the floor and I'm too lazy to reach down) it exactly how I want it (sleeps using hybrid mode in case I loose power) The sleep command on the shutdown menu also works. most info I found says to use; %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState 0,1,0 But this puts the computer in hibernate mode. I do have hibernate disabled but using hybrid sleep. So, What is the command to use to put your computer to sleep (not hibernate)?

  Read the article

• Reserve one http slot for /server-status?

  - by Stefan Lasiewski

  I have an Apache server which is hanging for some reason. When I normally want to check on the load of an Apache server, I tend to use mod_status via the URL at http://webserver1.example.org/server-status or from the commandline like service httpd fullstatus. However today, the Server is refusing all new connections. Some mysterious problem is causing connections to stall, which means that number of connections fills up all available connections (e.g. The number of connects exceeds the MaxClients setting), and therefore neither http://webserver1.example.org/server-status nor service httpd fullstatus can return anything. Is it possible to configure Apache to reserve one or two slots for the mod_status pages?

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• Intel SASWT4I SAS/SATA Controller Question

  - by Joe Hopfgartner

  Hey there! I want to assemble a cheap storage sytem based on the Norco RPC-4020 Case. When searching for controllers I found this one: Intel® RAID Controller SASWT4I This is a quote form the Spec Sheet: Scalability. Supports up to 122 physical devices in SAS mode which is ideal for employing JBODs (Just a Bunch Of Disks) or up to 14 devices in RAID 0, 1, 1E/10E mode through direct connect device attachment or through expander backplane support. Does that mean I can attatch 14 SATA drives directly to the controller using SFF-8087 - 4x SATA breakout cables? That would be nice because then I can choose a mainboard that has 6 Onboard SATA and i can connect all 20 bays while only spending 155$ on the controller and like another 100$ on cables. Would that work? And why is it 14 and not 16 when there are 4 Ports? I am really confused about all the breakout/fanout/(edge-)expanding/multiplying/channel stuff...

  Read the article

• VNC unattended Server (No user Interaction)

  - by Louis van Tonder

  I worked on a proof on concept a while ago.... whereby I managed to get VNC going in full "unattended" mode... I.e. The VNC Server dials into the viewer... which is running in Listening mode. The same concept of how single click works, but without the user interaction. I cant seem to locate my source files for this concept I worked on... although I have found my shortcut that worked on the Viewer side to listen. "C:\Program Files\UltraVNC\vncviewer.exe" -listen 5007 /noauto /256colors I can not however remember/locate my demo of what the server is doing.... how to configure it. If I remember correctly, the server was also started with command line params that "dialed" into a remote IP/port, that the viewer is listening on. Any ideas? Thanks

  Read the article

• Using runit and monit to run / monitor services

  - by murtaza52

  I am configuring some services to run on Ubuntu server. I was going through the link below where they use runit to run the services and monit to monitor the services - http://rubyworks.rubyforge.org/manual/monit.html http://rubyworks.rubyforge.org/manual/runit.html 1) The services are all started through monit. 2) Monit inturn starts them using runit. What is the advantage of using the above setup, where the services are run using runit via Monit. Why use runit in the middle, instead of directly starting them with monit?

  Read the article

• WinXP password messed up after reset

  - by Mark Flint

  I changed my winXP logon password - but could not get in. Obviously I made the some mistake twice... caps lock or something but couldn't get the password. So I booted into safe mode, when into Users and changed the password. Now I when I restart I can get in at logon with my new password, but the standard screensaver - which used to be the same as my user logon - now is something different. I think it's still the previous one which I couldn't get right. Now when I go into Users (not in safe mode) and try and change the password I can't. It won't accept my new user logon which works fine when logging on. I think this too is still the previous one which I couldn't get right. How can I definitely reset the password so it works at logon, in the control panel/users, and the screensaver?

  Read the article

• Can't start firewall or automatic updates in Windows XP

  - by Chris Porter

  On a friends laptop following some viruses infestations there is a problem in starting the Windows firewall. The error is: Could not start the Windows Firewall/Internet Connection Sharing(ICS) service on Local Computer. Error 2: The system cannot find the file specified When attempting to turn on automatic updates in the security centre, the message is: We're sorry. The Security Center could not change your Automatic Updates settings. To try changing these settings yourself, go to System in Control Panel. On the Automtic Updates tab, select Automatic (recommended), and then click OK. All the options under "Automatic Updates" are greyed out. I've tried the suggestions below and many others: http://windowsxp.mvps.org/sharedaccess.htm http://support.Microsoft.com/kb/892199 http://windowsxp.mvps.org/repairwmi.htm I can't do a repair install because the installer doesn't detect existing versions. It's XP pro service pack 3.

  Read the article

• Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

  - by Coder

  I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

  Read the article

• Pasting into Vista cmd.exe broke, why?

  - by Michel de Ruiter

  I use Windows Vista x64 and regularly use the command line window CMD.EXE. I have enabled QuickEdit Mode (and Insert Mode and AutoComplete), to be able to quickly copy and paste text. Copying (select block, Enter) works fine. Pasting (right click) text also works, as long as it has been copied inside a CMD.EXE window. When I copied the text somewhere else (in an editor, browser or whatever) however, pasting into CMD.EXE does not work! :-( Using the menu to Edit, Paste does not do anything either, so it's not a mouse thing. I also tried elevating CMD.EXE. I can copy/paste freely between CMD.EXE instances of all sorts: elevated/normal, x64/x86... I'm sure it did work on this machine until relatively recently. What could have happened? Some Windows Update perhaps? The problem has been reported by others, but without a solution.

  Read the article

• ubuntu fails to start

  - by miccaman

  I have a laptop with ubuntu 9.10 which fails to start, and I want to copy the data from it to an external hard disk. I can login in recovery mode command line, but then I cannot mount the external hard drive. (in recovery mode I cannot write to the laptops hard drive) If I boot from an portable USB with mintlinux, I can mount the external harddrive, and copy most of the data from the laptop, however there is a dir which I have no rights to access under /home/user/Documents then I get a permission denied error. Are there any other options?

  Read the article

• Is there an FTP client for Windows 7 with a text-based UI? (not text-prompt based, like ftp.exe)

  - by Alan B

  Is there such as thing as a text-mode FTP client for Windows 7 ? By 'text-mode' I mean one that runs in a CMD.EXE window as opposed to a Windows GUI application. It also needs to be something along the lines of FileZilla, i.e. menu-driven as opposed to command-entry clients like NcFTP or indeed the built-in one. edit: To avoid confusion, what I mean is an application similar to that pictured (ZTreeWin File Manager), which runs from CMD.EXE and uses text characters for its UI, within the CMD.EXE window. The built-in FTP client, and things like NcFTP offer a prompt at which you issue commands. That's not what I'm looking for.

  Read the article

• How to block/redirect hosts and subdomains of a host using htaccess?

  - by Sven

  I want to block several host-domains and their subdomains, as well as IP-Adresses using htaccess. So far I added to my .htaccess-file: # block doamins and all subdomains Deny from .example.org # block domainrange: 1.2.3.[1-255] Deny from 1.2.3. # Block single IP Deny from 2.3.4.5 but still I had problems with spam from e.g. server1.example.org. What is wrong with my script? Is it also possible to redirect all requests from certain hosts/IPs to a document (say: info.html)?

  Read the article

• Multiple Reporting Services databases in one instance?

  - by Tedd Hansen

  Is it possible to have multiple Reporting Services databases in one MSSQL instance? I have a MSSQL 2008 R2 with RS set to SharePoint Integrated Mode. This RS is in use and can't be changed. I do however need a RS in native mode for the TFS installation to be able to use it. Am I required to set up a new instance of MSSQL? Bonus question: If so, is that permitted under the MS licensing scheme or is it an additional cost?

  Read the article

• 550 operation not permitted using FTP

  - by monkey_boys

  I'm using FTP to manage some files on a site I run but keep seeing this (truncated) error log: Command: DELE calendarpermission.php Response: 550 calendarpermission.php: Operation not permitted [...] Command: DELE button_down.gif Response: 550 button_down.gif: Operation not permitted Command: CWD /domains/example.com/public_html/admincp Response: 250 CWD command successful Command: PWD Response: 257 "/domains/example.com/public_html/admincp" is the current directory Command: RMD control_examples Response: 550 control_examples: Operation not permitted Command: CWD /domains/example.com/public_html Response: 250 CWD command successful Command: PWD Response: 257 "/domains/example.com/public_html" is the current directory Command: RMD admincp Response: 550 admincp: Operation not permitted Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (122,155,5,50,138,244). Command: MLSD Response: 150 Opening ASCII mode data connection for MLSD Response: 226 Transfer complete Status: Directory listing successful Status: Set permissions of '/domains/example.com/public_html/admincp' to '777' Command: SITE CHMOD 777 admincp Response: 550 CHMOD 777 admincp: Operation not permitted What do I do to solve this?

  Read the article

• How can I remove LibUSB on Windows 7?

  - by Cokegod

  I've installed LibUSB, a software that modifies your USB driver so that programs can access it easily. I didn't know that in Windows 7 you have to run it in compatibility mode for Windows XP, so now my Windows 7 can't access any USB port (including keyboard and mouse). Now I can't access my computer at all, and I don't have any PS2 connection in my computer. I tried to run it in Safe Mode but it didn't change anything. I tried to run a system restore from before the installation of LibUSB, but all the restore points give me an error: "The instruction at 0x73888f18 referenced memory at 0x00000004. The memory could not be read." I also tried to run Hiren's Boot CD and remove all the files associated with LibUSB, but that didn't change anything. So how can I remove LibUSB and access my computer again without formatting my hard drive? (I have important things on it)

  Read the article

• Are you supposed to type '6' with the left hand or the right hand?

  - by Joey Adams

  A few weeks ago, I did a Google Images search for keyboard finger charts to see which fingers I'm supposed to be using to type which keys. According to the charts, '6' is supposed to be typed with the right hand: (as shown on en.wikipedia.org/wiki/Typing) However, today I spotted a split keyboard in a store with the '6' on the left side of the split. Indeed, an image search for split keyboards indicates that this is the norm: (as shown on en.wikipedia.org/wiki/Microsoft_Natural_keyboard) When doing touch typing "correctly", should I go with the finger charts (type 6 with my right hand), or should I go with the split keyboards (type 6 with my left hand)? <troll> Is this just another example of Microsoft not following the standards? </troll>

  Read the article

• Websocket handshake response not forwarded from TCP to client

  - by Saharsh

  I am trying to create a websocket server. I can see the websocket client's opening handhshake. My response to it is received by the client laptop (I can see this on wireshark). So the TCP connection has been established. But the client (a chrome websocket client extension) does not receive the handshake packet. What could be a possible reason for TCP to not forward the handshake to the client or for the client to not be able to read the TCP message? Client handshake: GET HTTP/1.1 Upgrade: websocket Connection:Upgrade Cache-Control:no-cache Host:192.168.0.101 Origin:http://www.websocket.org Pragma:no-cache Sec-WebSocket-Extensions:permessage-deflate; client_max_window_bits, x-webkit-deflate-frame Sec-WebSocket-Key: qrmw/m+BoZije6h9HYKmVw== Sec-WebSocket-Version:13 Upgrade:websocket Server Response: HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: jj1g5Io57m9ks8cme3jkbyo2asc= Access-Control-Allow-Origin: http://www.websocket.org Server: xyz Sec-WebSocket-Extensions: Thanks!

  Read the article

• How to force 640*480@60Hz screen resolution on xubuntu 12.04

  - by c2h2

  It seems xubuntu won't be able to correctly set resolution at 640*480@60Hz at its Display settings. And I am unable to correctly my super small 6.4 inch Mitsubishi VGA panel via VGA cable. I have tried to hack both X11 conf /etc/X11/Xorg.conf and xfce4 conf, but all the document I can find is outdated. and conf files are changed into other location. Can someone give me a hand and I'll mark correct for other people to use? Thanks! EDIT: The board is an Intel Atom D2700, gpu is SGX545. I tried to use xrandr --output default --mode 640*480 It seems works fine, but refresh rate is 75Hz, but the screen only suports 60Hz So I used xrandr --output default --mode 640*480 --rate 60 but it give error: xrandr: Failed to get size of gamma for output default Can anyone pointing any directions?

  Read the article

• AHCI on Windows if BIOS does not have the option but all hardware does support it?

  - by Foo Bar

  Is it somehow possible to use AHCI on Windows if the BIOS does not have the option to enable it? This is a known problem especially on mid-old Laptops that have chipsets and drives that perfectly support SATA and AHCI, but only provide the legacy IDE mode in BIOS. Especially with SSD's this can often be a problem. I know that Linux has no problems to run everything in SATA and AHCI mode on these machines. So, is there any possibility to also make Windows "override" the BIOS? Some kind of alternative BIOS's, drivers, etc? Or some kind of Linux-based boot module that emulates an AHCI-capable BIOS to Windows while booting up?

  Read the article

• is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

  - by user239167

  I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

  Read the article

• Setting up Virtual Hosts with Apache on Windows 2008 server for multiple sites. Complicated setup, including subversion

  - by Roeland

  I am setting up apache on my windows 2008 server at my home. It will serve 2 functions. Subversion hosting to allow me and some others to manage company documents with version control Local website hosting for web development. Will need to run several websites since I generally work on more then one site at a time. Heres what I have done so far. I set up subversion and apache 2.2 using some walk troughs. I changed the default port to 1337. (im a nerd) Using dyndns.com I created a domain to forward to my home ip which is dynamic. ( company.gotdns.org) I then went into my DNS for my company.com and added a record to point repo.company.com to company.gotdns.org At this point people who need access to my file repository can access by going to repo.company.com/repo which is good so far. My question comes on the next step, setting up virtual hosts with apache. Ideally I would like to have my local website be viewable by some others in the company from their homes. So, say I am working on site1, I would like to have them be able to view this by going site1.roeland.bythepixel.com. At the same time, I would like to have site10.wouter.bythepixel.com go to his local setup for site10. What I have done for this: I went into my DNS for company.com and added a record to point roeland.company.com to company.gotdns.org (which translates to my ip). I added code to my httpd-vhosts.conf (listed at bottom) I added code to my host file (listed at bottom) Hah, so of course this doenst work as excepted.. going to site1.roeland.bythepixel.com doesnt bring up my test1 site. Could anyone point me where I may be going wrong? Thanks! hosts: 127.0.0.1 localhost 127.0.0.1 sensenich.roeland.bythepixel.com ::1 localhost httpd-vhosts.conf: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "F:/Current Projects/sensenich.com" ServerName sensenich.roeland.bythepixel.com ErrorLog "logs/sensenich.roeland.bythepixel.com-error.log" CustomLog "logs/sensenich.roeland.bythepixel.com-access.log" common </VirtualHost>

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >