Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 239/904 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

  • Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

    - by Abner
    Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

    Read the article

  • Can Office365 (Enterprise) sync from a remote LDAP server?

    - by kez
    I am looking in to the details of a migration to Office365 - primarily for the use of hosted Outlook capability. I see that the Enterprise plans have "Active Directory Sync", but details seem scarce. Is it possible to sync an independent LDAP server (such as Apache Directory) up to O365 (I want to keep it separate), or would I need to host a local instance of Active Directory and use that to sync users up to O365?

    Read the article

  • MySQL ODBC + SSL with only the SSL Cipher option?

    - by sdek
    Does anybody know how I can have an SSL encrypted connection over MySQL ODBC without the cert options? So I asked my web host to setup a MySQL+SSL connection so that we can access our website's database via ODBC or MySQL Query Browser (or the likes). I am able to get an encrypted connection with the standard mysql client and MySQL Query Browser, but I can't get the ODBC connection to work. Looking for a little help... The way they set it up is a little different from the way I have read about on the interweb. The host didn't setup a cert, or at least I don't think so - I don't need to specify any cert options in my connection. I just need to specify the ssl cipher. Here is how I connect with the mysql client: mysql -h myhost.com -u myuser --ssl-cipher=3DES -p That works to get an encrypted connection. At least I am pretty sure it works because when I run mysql> \s I get SSL: Cipher in use is EDH-RSA-DES-CBC3-SHA Also, when I put EDH-RSA-DES-CBC3-SHA into the SSL Cipher field of MySQL Query Browser (without specifying any other SSL options) it connects just fine. But then when I try to do the same thing with my MySQL ODBC 3.5.1 and 5.1 I get a generic error. Here is the error from the 5.1 Driver. Connection Failed: [HY000] [MySQL][ODBC 5.1 Driver]SSL connection error

    Read the article

  • How do you enable Remote Connection with SQL Server 2008 w/o Installing Management Studio?

    - by danmine
    I'm having a rather tough time finding information on this since almost everything I read requires Management Studio installed in the server which I prefer not to do. Also, to connect to it using SQL Server Management Studio installed on the client, are these settings ok? ServerName: 10.232.234,1433\SQLEXPRESS Login: sa Password: password Yes, I want to specify the port number in the client side since I have to go through a few firewalls which I have poke holes through to get to the SQL Default port 1433.

    Read the article

  • How to establish SIP connection, when SIP-proxy is required?

    - by LA_
    I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

    Read the article

  • How can I copy the output from a remote command into the local clipboard?

    - by cwd
    I use iTerm2 as my terminal client in Mac OS X. On the local system I can use pbcopy and pbpaste to transfer data between the system clipboard and the terminal, but of course this doesn't work when you're ssh'ed to another machine. Is there some way which I can take the result of a command and copy it to the clipboard automatically? Perhaps an applescript to grab the text on the iTerm windows, then get the next to last line? For instance, if I wanted to copy the current working directory: I run pwd, then use the mouse to select the text, and then press command + c. Is there any better / faster / automatic way of doing this? I'm not looking for a bulletproof solution that would work for every command (eg: might not work when there is a huge scrollback) - I'm just looking for something to make this task that I do quite often a little less tedious. Update I'm looking into using screen to do this, but I'm still not sure if it is possible.

    Read the article

  • Cable installed - now my hub has no connection the router/modem - what do I need to buy?

    - by bcmcfc
    My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

    Read the article

  • How to set up Asus RT-N66U in bridge mode with wired connection to main router?

    - by Milligan
    I have a wired router (TP-Link RT-860) in the basement where the cable service comes in. Eight wired ethernet connections span two buildings. I currently have a Linksys wireless router set up in bridge mode, but its signal doesn't span the whole area. I have purchased an Asus RT-N66U to replace it, but I can't figure out how to set it up in bridge mode. Does anyone know if this is possible? Second question: Would there be any advantage in installing DD-WRT on the Asus?

    Read the article

  • Can remote LogMeIn Hamachi users access our local LAN?

    - by Kev
    Unknown to me, one of the kids has installed LogMeIn Hamachi on his PC so that he can access and play on his pal's Minecraft server, and vice versa. One of the things I did was disable the Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks on the Hamachi NIC in Windows 7's Network Connections. However, my lack of fu when it comes to these types of services is leaving me feeling a little uncomfortable about him using this. Is there anything I should be worried about here? For example, can his friends access our local LAN (which has a number of NAS boxes with unsecured shares) and get up to no good?

    Read the article

  • Over gigabit connection, Teracopy does 31MB/s, but Windows 8 does it at ~109MB per second?

    - by Gaurang
    I got my brain-melting first taste of Gigabit networking today, between my 2011 MacMini and Windows 8 Pro desktop connected via Cat.5e to Linksys WRT320N(sporting dd-WRT). After making sure that the line speed on both systems showed 1Gbps, I proceeded to copying a 2.4GB MP4 from the Mini to the Win 8 desktop (SMB sharing). Although satisfied with the 30-34 MB/s that Teracopy was showing (that was a proper step-up for me from 10 MB/s), I still was curious about this massive difference in the advertised and real-world speed. 2 hours of Google had me believing that there were other factors that resulted in less speed, SMB being one. So just for the sake of doing it, I iPerf'd both the systems and guess what that showed - around 875mbps on both systems! I then stumbled upon this little piece of info after which I turned off Teracopy and copied the same file through Windows 8's regular copier. 109 MB/s. Molten brains :) What exactly is causing this? And can I enable such speeds via Teracopy? I really dig the extra features that Teracopy has, will surely miss them now :D

    Read the article

  • Have an iPad's viewable area visible on your computer monitor for remote web-meeting training?

    - by MikeN
    I want to demo the usage of my iPad on my computer screen so that I can transmit it to other people during a training session using a web conference tool (like dimdim.com, gotomeeting.com, fuzemeeting.com, etc...) Is there a way to stream an iPad's display to a computer so it would be visible in such a screen casting software? My current ad-hoc solution for this would be to use a webcam to livecast me using a physical (real life) iPad and broadcast that to other users for training. This is undesirable due to the difficulty in really seeing the iPad well. So I'm hoping someone has a way to do: 1) Video output the iPad's display to my computer screen. 2) Emulate an iPad with a installed app (not having the source code) on the screen.

    Read the article

  • NTBackup (on WS2k3) fails to backup remote server (WS2k8R2) with " Error: is not a valid drive, or you do not have access."

    - by Mark A
    We run an NTBackup job on a Windows Server 2003 R2 SP2 with all updates (as of Q4-2011). It works well backing up two WS2k3 servers as well as the backup server itself. However, we have been unable to successfully back up our Windows Server 2008 R2 machine ("G5-01"). It often runs for about 2GB worth of backup and then dies out with one of the below error messages. It should be more like 20GB for the full server. We have tried using the admin share (C$), an explicitly shared drive share, UNC and mapped drives. The result is the same each time, the only thing that varies is the amount of stuff backed up before it chokes. We've also run NTBbackup from the UI interface, from the command line and as a scheduled task. We are backing up to 400/800GB tapes and they have plenty of space available on them (blank media). Error: \\G5-01\c is not a valid drive, or you do not have access. Error: \\G5-01\c$ is not a valid drive, or you do not have access. Error: Y: is not a valid drive, or you do not have access. Error: Could not access or create backup catalog files. Verify that you have full access to the working folder and there is disk space available. The job is run as Administrator and we have no problems logging onto the server and transferring files. The Event Log on the WS2k8 is not much help, as it has success audits for each login. All of the hardware involved (HP DL360 G3, HP LTO Ultrium 3, Adaptec 39320A) has the latest supported drivers. We've seemingly tried a bunch of different options but are wondering where to look next to resolve the backup issue. We've been super happy with our reliable schedule task for years but this one is stumping us!

    Read the article

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • Establish connection with an IP camera behind a modem-router assigned with a private IP by Internet Service Provider?

    - by silvernightstar
    Most solutions out there require the modem-router to have been assigned a public IP by the ISP. After which, one can access the IP camera via a portforward setting on the router. However, my ISP only provides private IPs internal to their system (they probably have a limited pool of public IPs). So I am unable to view my IP cameras in the way described. I'm wondering if there's a way to work around this problem without having to need a public IP. Since, after all, two users on Yahoo Messenger or Facebook Chat are able to find one another and exchange data despite both sides being within the internal networks of their respective ISPs. Given that I only plan to view my IP cameras via iOS or Android running on a smartphone or tablet, any ready-to-use solutions out there?

    Read the article

  • What's the easiest way to allow Exchange 2003 remote (no MSO client) users check their Mailbox size?

    - by Myrddin Emrys
    We are migrating from Exchange 2003 with no quota settings to Exchange 2010 with limited mailbox sizes. We are trying to get users to clean their mailboxes prior to the move to reduce the transfer load, as well as to comply with new quotas on the 2010 system. But many users access their mail through webmail only. I cannot see a way for users to access their mail store size in this manner. Has anyone else run into this problem? Is there a good way to easily let users check their own mailbox size? The only thing I've come up with as a workaround is a report that IT generates and mail-merge it out to users daily with their current mailbox size. This is cumbersome and time consuming compared to a way for them to check their own mailbox size however.

    Read the article

  • Laptops trying to connect via wireless? Only able to connect only via wired connection

    - by Chris J. Lee
    It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

    Read the article

  • Will I have internet connection issues next day, if I unplug router at night?

    - by headskracher77
    I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

    Read the article

  • How to restrict Windows 7 internet data usage while using mobile connection?

    - by Daniel Gehriger
    When I'm travelling I would like to use my iPhone's mobile hotspot feature to provide Internet access for my Windows 7 laptop. However, my mobile data plan has a limit on the amount of data I can use per month, and I would like to restrict Internet access to a few very specific applications (such as a database administration tool and Chrome). Is it possible to create a firewall profile for use with mobile data access? If not, what tools exist that could assist me?

    Read the article

  • Can My Personal GMail Query A Remote LDAP Server?

    - by Maarx
    I have a personal GMail account, from which I frequently send e-mail to a great many various users of a specific business. The corporation has been kind enough to provide me with the credentials to access their LDAP server, with which I would like my GMail web client to be able to auto-complete partial addresses or names for which that LDAP server has an entry. Is there any way I can get a personal GMail account (or it's corresponding entire Google account) account to incorporate an LDAP server into it's Contacts? If I cannot get it to query dynamically and on-demand, is there an idiot-proof way (assuming the client permits, which they may not) to query the LDAP server for it's entire database, save it, and bulk import it to GMail? Perhaps, even, something I could set to repeat periodically (weekly, perhaps), without human interaction? If I did the latter, I assume it would be trivial to import all of these contacts under a single category that could be easily manipulated from within the GMail web-based client. I have been a staunch user and supporter of the GMail web-based client since it's instantiation, but this one is kind of a deal-breaker for me. If it's impossible, what do you suggest I do?

    Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >