Search Results

Search found 1932 results on 78 pages for 'andy thomas cramer'.

Page 24/78 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31 | Next Page >

Outlook connected to exchange does not send email

- by Thomas de Nooij

I have multiple machines with Outlook 2010 connected to RackSpace hosted exchange server. Everything works fine, but emails send after a while since outlook started will not leave the outbox. Clicking Send & Receive will display the progress bar at 100% completed with no errors, but is not really finishing. The Cancel All button is still active. The emails in the outbox are bold & italic, so ready to be send. When I close outlook and start it again, the mails are sent immediately without problems. I have tried the following: Checked if there are any third party addins: only Microsoft Add ins Checked if the virus scanner is blocking anything, but McAfee is not doing this. Checked and Repaired the .ost file Increased the server time-out from 30 seconds to 60 seconds Nothing helped. Any suggestions?

Read the article
Code to update HyperV Export file

- by Andy Schneider

I am using the HyperV Module from Codeplex to do a "config only" export from a 2008R2 Hyper-V server. In order to import the configuration on another HyperV server, I need to edit the value of CopyVMStorage in the EXP file. This file is an XML file. I wrote the following code in PowerShell to do the update for me. The variable $existing is the existing exp file. $xml = [xml](get-content $existing) $xpath = '//PROPERTY[@NAME ="CopyVmStorage"]' foreach ($node in $xml.SelectNodes($xpath)) {$node.Value = 'TRUE'} $xml.Save($existing) This code makes the correct changes to the XML. However, when I go to import the file on the Hyper-V server, I get an error that says the file format is incorrect. I am wondering if the encoding of the file is incorrect or if there is something else going on. If I edit the file manually in wordpad, it imports without an issue. The filename is a GUID with a .exp extension, and it appears that the file name is too long for notepad to open. Notepad throws an error trying to open the file, which is why I went with WordPad. I have noticed that the file that is updated with PowerShell comes out formatted whereas the raw file is xml all bunched together with no whitespace. Any ideas on what "file format" means in this HyperV error message and how I might be able to use my code to automate this change in the XML without changing the file format?

Read the article
how to install yum on fedora core 6 with rpm

- by Thomas

I used this file http://www.icewalkers.com/rpm/yum/fedora-core-6/download/yum-3603.html all the links say file not found. I can install yum with rpm -ivh *.rpm I need to have yum in rpm If you know please tell me installing yum and dependencies with rpm.

Read the article
Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

- by Thomas

I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

Read the article
PHP displays blank white page even with all error reporting enabled

- by Andy Shinn

I am trying to debug a broken page in a Drupal application and am having a hard time getting PHP to spit anything useful out. I have the following set: error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On error_log = /var/log/php/php_error.log I have a file showing me phpinfo() which confirms these variables are set correctly for the environment. I have increased memory_limit to 256M (which should be more than enough). Yet, the only indication I get is a status 500 code in the apache access log and a blank white page from PHP. The Apache virtual host has LogLevel set to debug and the error log only outputs: [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 0 to 2 : URL /index.php, referer: http://ec2-174-129-192-237.compute-1.amazonaws.com/admin/reports/updates [Sat Jun 16 20:03:03 2012] [error] [client 173.8.175.217] File does not exist: /var/www/favicon.ico [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 42 to 44 : URL /favicon.ico The PHP error log outputs nothing at all. kernel and syslog show nothing related to Apache or PHP. I have also tried installing suphp and checking its log just confirms the user is executing correctly: [Sat Jun 16 20:02:59 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 [Sat Jun 16 20:05:03 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 This is on Ubuntu 12.04 x86_64 with the following PHP modules: ii php5 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (metapackage) ii php5-cgi 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (CGI binary) ii php5-cli 5.3.10-1ubuntu3.1 command-line interpreter for the php5 scripting language ii php5-common 5.3.10-1ubuntu3.1 Common files for packages built from the php5 source ii php5-curl 5.3.10-1ubuntu3.1 CURL module for php5 ii php5-gd 5.3.10-1ubuntu3.1 GD module for php5 ii php5-mysql 5.3.10-1ubuntu3.1 MySQL module for php5 So, what am I missing here? Why no error reporting?

Read the article
what determines the bios you can use

- by andy

I have a Compaq sr5710f with a MCP61PM-HM (Iris8) motherboard and loaded a Geforce6100sm-m bios on to it. It works fine and opened up some options, but I want to give my comp am3 socket support. So my question is if I go looking for a bios that will do that for me what do I need to pay attention to. Is it only the chip set which is geforce 6150se nforce 405 or are there more things I should be looking at. If anyone thinks they might know a bios that will help me out that would be good to. I am looking for a retail bios though. I do not want to load any of the experimental ones you can find on the net. Also I would need it to support ddr2 800 ram, and would like to keep am2 support to. I know my bios is data that is downloaded onto my motherboard, or for lack of a better word a program. I am currently running a bios that is not for my motherboard, so I know it can be done. What I need is what do I need to pay attention to when looking for compatible bios programs, that is not for my motherboard.

Read the article
Full Backup & Restore for Windows Vista

- by Thomas Matthews

I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

Read the article
Windows 7 freezing unexpectedly

- by Thomas Deutsch

I have a Windows 7 computer here, which is freezing between 2 times a day and 1 time every second day. I see no problem, no special drivers, no special Apps are open, no encryption or something like that. Apps usually open then are Firefox, Thunderbird, Eclipse and maybe Office. Computer is just freezing. No Reboot, no shutdown, no bluescreen and no error. User has to hardreset it. Eventlog shows me an kernel error saying it has been unexpected rebooted due to an fatal error, but no statement about what kind of error happended. Anyone an idea what it can be? Chkdisk should be ok (currently, I run it a second time).

Read the article
Can't find second partition on encrypted drive with two partitions

- by Thomas Uhrig

I have a drive with two partitions, a system partition (Windows 7) and a partition just for data. Both are encrypted with the same password. I didn't had any problems, but yesterday my laptop gets broken. Now, I'm trying to connect the drive via USB to a new laptop and read it. The problem is, that I only see the system partition, not the one with my data. When I click on "Select Device", I can see my drive as "Harddisk 1" with 300 gb. But I only see a single partition "Partition1" with 117 gb. I'm unable to find the second one. It's not a hidden partition. Any ideas? Thanks.

Read the article
Background process text appears in terminal vim

- by Jezen Thomas

First time poster, long time lurker, searched, couldn’t find etc, etc. I’m running vim in tmux, in iTerm2. I’m running a server with Grunt.js, which I have running in the background, out of my way. I start my grunt server in the background like this: grunt server & Grunt also watches a bunch of files, and runs some tasks when any of the watched files have been written to. The problem is, when I am in vim and I write a file, the output from grunt starts rendering in vim! Here are some screenshots to illustrate the problem: Before writing the file: And after writing the file: What have I tried? I’ve tried running a ‘stock’ vim by starting with this: vim -u NONE …But the problem remains. This suggests to me that the problem is not with my .vimrc. Perhaps it’s an issue with iTerm2, I don’t know. Help.

Read the article
Various problems with software raid1 array built with Samsung 840 Pro SSDs

- by Andy B

I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

Read the article
"OR" clause in Outlook 2007 Search Folders - Folder Composition

- by Thomas L Holaday

Is it possible to specify a Search Folder in Outlook 2007 that will use an OR rule ("any") instead of an AND rule ("and")? In particular, I have a search folder named A and another named B; I want a search folder named AB that will have all the messages that are in either A or B, or both. When I specify AB with the rules "In Folder is A exactly" and "In Folder is B exactly", I get an empty folder, possibly because at the moment no messages are in both. Is the workaround to rename "A" to "A workaround" and "B" to "B workaround" and then specify "AB" with the rule "In Folder contains workaround"? Urggh.

Read the article
Weird PCI bug: lots of missed packets, or data comes in "bursts"

- by Thomas O

I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

Read the article
Empty sshd_config file

- by Thomas

I run a Centos 5 server with a LAMP stack. I was told this morning that the server was down not serving web content. I then tried to restart httpd but it failed due to another process was listening on port 443. I checked what process was running on 443 using netstat and it was sshd. I then checked the sshd_config file to check the ports that sshd was running on but the sshd_config file was completely blank. I than ran chkrootkit and it flagged not suspicions. What could of caused the sshd_config file to be blank, and sshd service to be restarted? I would really value your thoughts. All the best.

Read the article
Windows 8 Activation - Product ID: Not available

- by Guy Thomas

The situation: I downloaded Windows 8 RTM from MSDN (I have a subscription). Naturally, I downloaded the product key as well. Windows 8 installed like a dream: lightning fast with no problems. I accepted the product key at the beginning of the install. Next, I thought I would download Updates, but they failed, so I checked the system's activation in Control Panel System. Problem: It returned "Product ID: Not available." There's nothing under "Windows activation" that I can click on, no blue links. I had a 'Chat' with MSDN, who introduced me to SLUI.exe. On Windows 8 it did nothing. (On Windows 7 it is supposed to bring up the Activation Menu). I phoned the Microsoft Activation number, they told me to contact MSDN. MSDN left the 'chat' by telling me to contact Microsoft! Hmm... I wonder if anyone at SuperUser can help?

Read the article
'Relaunching tuncfg' keeps showing up in my console

- by Andy

I was scanning my Mac OS X with sophos antivirus and opened the console. I see this over and over again. How do I tell whatever it is to stop trying to launch tuncfg? I recently reinstalled my operating system because I accidentally messed up some key library for using the terminal when trying to install macruby. 3/13/11 11:27:32 PM com.hamachix.tuncfgd[856] /usr/sbin/tuncfgrelaunch: line 8: tuncfg:: command not found 3/13/11 11:28:32 PM com.hamachix.tuncfgd[865] Relaunching tuncfg 3/13/11 11:28:32 PM com.hamachix.tuncfgd[865] /usr/sbin/tuncfgrelaunch: line 8: tuncfg:: command not found 3/13/11 11:29:32 PM com.hamachix.tuncfgd[875] Relaunching tuncfg 3/13/11 11:29:32 PM com.hamachix.tuncfgd[875] /usr/sbin/tuncfgrelaunch: line 8: tuncfg:: command not found

Read the article
Can't pipe or redirect cygwin grep output

- by Thomas

How do I get grep to work properly in a regular cmd.exe? > grep -o 'ProductVersion\".*\".*\"' foo.txt | grep -o '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' foo.txt:ProductVersion" Value="59.59.140.59" grep: |: No such file or directory grep: grep: No such file or directory grep: [0-9]+\.[0-9]+\.[0-9]+\.[0-9]+: No such file or directory and > grep -o 'ProductVersion\".*\".*\"' foo.txt >> blah.txt foo.txt:ProductVersion" Value="59.59.140.59" grep: >>: No such file or directory grep: blah.txt: No such file or directory

Read the article
How to access a port via OpenVpn only

- by Andy M

I've set up an openvpn server alongside an apache website that can only be accessed on port 8100 on the same machine. My /etc/openvpn/server.conf file looks like this: port 1194 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/server.crt key ./easy-rsa2/keys/server.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem # Diffie-Hellman parameter server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt # make sure clients can still connect to the internet push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 Now I tried to let only clients connected to the vpn network access the website on apache via port 8100. So I defined a few iptables rules: #!/bin/sh # My system IP/set ip address of server SERVER_IP="192.168.0.2" # Flushing all rules iptables -F iptables -X # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Allow incoming access to port 8100 from OpenVPN 10.8.0.1 iptables -A INPUT -i tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # outgoing http iptables -A OUTPUT -o tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT Now when I connect to the server from my client computer and try to access the website on 192.168.0.2:8100, my browser can't open it. Will I have to forward traffic from tun0 to eth0? Or is there anything else I'm missing?

Read the article
Determining speed (class) of USB on PC

- by Thomas Matthews

Is there a method for determining the speed of a USB port on a Windows XP PC, without using a USB protocol analyzer? I'm looking for something simple, such as looking at the Device Manager. I would like to hook up some USB equipment to a USB 2.0 port, rather than the slower USB 1.0 or 1.1.

Read the article
Protect apache pages by URL

- by Thomas

Is it possible to allow access to specific URLs only to certain networks? Basically, I would like to restrict access to the admin area only to the local network This area's pages are prefixed by /admin Essentially, I would like all /admin/* to be forbidden from public access. Can apache handle such a case? Thanks UPDATE Using your suggestions I came up to <LocationMatch admin> Order allow,deny deny from all Allow From 192.168.11.0/255.255.255.0 </LocationMatch> However, I get 403 even though I am on the network. Additionally, if I put apache behind haproxy, is this going to work? Because the traffic will be coming from 127.0.0.1 to apache

Read the article
yum list installed including version of all installed packages CentOS 5.4

- by Andy

I have a list of packages installed with yum on CentOS 5.4 [root@server ~]# yum list installed ... Installed Packages GConf2.x86_64 2.14.0-9.el5 installed ImageMagick.x86_64 6.2.8.0-4.el5_1.1 installed MAKEDEV.x86_64 3.23-1.2 installed MySQL-python.x86_64 1.2.1-1 installed I would like to download these rpms locally using yumdownloader --resolve MySQL-python-1.2.1-1.x86_64 etc. However the package formatting is different (MySQL-python.x86_64 1.2.1-1 vs MySQL-python-1.2.1-1.x86_64) so I am unable to download them using the above command. I don't want to have to parse the output of yum list installed, and I also don't want to use the contents of /var/log/yum.log* as I'll have to account for erased packages and version discrepancies. However /var/log/yum.log* does have the formatting I require... May 25 14:58:15 Installed: groff-1.18.1.1-11.1.x86_64 May 25 14:58:15 Installed: bzip2-1.0.3-4.el5_2.x86_64 Any suggestions?

Read the article
Internet Explorer 8 Viewing PDF files vs saving them

- by Andy Evans

I have a user asking about viewing PDF files in Internet Explorer. When she clicks the file link on a website, IE prompts her to save the file, which she then has to open to read. What she's not seeing in the prompt is the ability to open the file without having to save it, or, just opening the PDF automatically. She and a few others are having the same problem, while a majority of the user do not have this problem. All of the users have IE 8 and Adobe Reader 9 installed. I've verified that Adobe Reader's "Display PDF in browser" option is enabled. What else should I check?

Read the article
How to prevent asymmetric routing with multiple eBGP routers?

- by Andy Shinn

I have 2 routers announcing a /22 subnet to different providers (one providers connects to each of the 2 routers). I have split the /22 in two /23 to announce one /23 on each of the routers plus the /22 (the providers will take the more specific route). This allows me to fail over and keep traffic inside the /23 in and out the same provider. What are other ways in which I could announce just the /22 with both routers and have packets from servers on the network behind the routers go back out the same router in which they came in from? EDIT: The main problem I come across, which end users and clients complain about the most, is that the least hop route is sometimes not the "optimal" route. In my case, I know that Provider B may have better latency to X nation. But when packets come in from provider B, they may go out Provider A or provider B. The reverse is also true. If I send a packet to X nation out provider A, even though it may have more hops back, the packet will likely come in from Provider B (which may have higher latency, packet loss, etc. to this nation)

Read the article
Old laptop turns off due to overheating

- by Jake Thomas

I have an old Laptop that powers off when the processor's temperature exceeds 84degs Celsius. The more annoying part is flash causes this the most of the times. If I watch a web feed for more than 15-20mins, it results into hard shutdown of the machine. I have an idea of a could-be solution to this problem, I want a program that would decrease the processor's clock speed to about 1.2GHz or whatever, leading it a lower temperature. Is there a program out there that does this? P.S. Someone please edit this and add the relevant tags, as I'm new and i have no idea of what tags to choose from.

Read the article
I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

- by Thomas B.

I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31 | Next Page >