Search Results

Search found 4620 results on 185 pages for 'serial over lan'.

Page 24/185 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Router with Wake On LAN

    - by Jaroslav Záruba
    I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed DD-WRT I'd prefer if the new one supported WOL (Wake on LAN) out of the box. Other required features would be: DynDNS service support Port forwarding NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes)

    Read the article

  • wireless router on LAN

    - by Scott
    Hi, Can I put a wireless router (for a laptop to talk to) which is configured to use DHCP on our work LAN ? I just need the laptop to be able to talk to the internet. Will it automatically get the gateway information when it is assigned an IP via DHCP ? Thanks Scott

    Read the article

  • DMZ and LAN on the same Windows Storage Server 2008 R2

    - by Sergei
    We are moving from EMC Celerra NS20 to Windows Storage Server 2008 R2. I would like to use deduplication feature in WSS (Single Instance Storage) for hosting data for our external FTP server.The idea is to use NFS server on WSS as datastore for Linux FTP server located in DMZ and CIFS services for servers in LAN. Using Celerra fileserver I was able to create multiple instances of fileservers with multiple virtual interfaces and separate filesystems so all data and networks would be separated. Would it be possible to do something similiar on WSS?

    Read the article

  • DMZ and LAN on the same Windows Storage Server 2008 R2

    - by Sergei
    We are moving from EMC Celerra NS20 to Windows Storage Server 2008 R2. I would like to use deduplication feature in WSS (Single Instance Storage) for hosting data for our external FTP server.The idea is to use NFS server on WSS as datastore for Linux FTP server located in DMZ and CIFS services for servers in LAN. Using Celerra fileserver I was able to create multiple instances of fileservers with multiple virtual interfaces and separate filesystems so all data and networks would be separated. Would it be possible to do something similiar on WSS?

    Read the article

  • Tomato VPN connect but cannot ping LAN IP

    - by David Hamilton
    I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

    Read the article

  • MySQL hangs if connection comes from outside the LAN

    - by Subito
    I have a MySQL Server operating just fine if I access him from his local LAN (192.168.100.0/24). If I try to access hin from another LAN (192.168.113.0/24 in this case) it hangs for a really long time before delivering the result. SHOW PROCESSLIST; shows this process in Sleep, State empty. If I strace -p this process I get the following Output (23512 is the PID of the corresponding mysqld process): Process 23512 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...>) = 1 fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 33 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(33, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(33, F_SETFL, O_RDONLY) = 0 fcntl(33, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(33, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(33, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(33, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(33, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(33, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=10, revents=POLLIN}]) fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 31 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(31, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(31, F_SETFL, O_RDONLY) = 0 fcntl(31, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(31, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(31, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(31, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(31, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(31, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1^C <unfinished ...> Process 23512 detached This output repeats itself until the answer gets send. It could take up to 15 Minutes until the request gets served. In the local LAN its a matter of Milliseconds. Why is this and how can I debug this further? [Edit] tcpdump shows a ton of this: 14:49:44.103107 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [S.], seq 1434117703, ack 1793610733, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 14:49:44.135187 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 106:145, ack 182, win 4345, length 39 14:49:44.135293 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 182:293, ack 145, win 115, length 111 14:49:44.167025 IP 192.168.X.6.64624 > cassandra-test.mysql: Flags [.], ack 444, win 4280, length 0 14:49:44.168933 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [.], ack 1, win 4390, length 0 14:49:44.169088 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 1:89, ack 1, win 115, length 88 14:49:44.169672 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 145:171, ack 293, win 4317, length 26 14:49:44.169726 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 293:419, ack 171, win 115, length 126 14:49:44.275111 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [P.], seq 1:74, ack 89, win 4368, length 73 14:49:44.275131 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [.], ack 74, win 115, length 0 14:49:44.275149 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 171:180, ack 419, win 4286, length 9 14:49:44.275189 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 89:100, ack 74, win 115, length 11 14:49:44.275264 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 180:185, ack 419, win 4286, length 5 14:49:44.275281 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 185, win 115, length 0 14:49:44.275295 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [F.], seq 419, ack 185, win 115, length 0 14:49:44.275650 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [F.], seq 185, ack 419, win 4286, length 0 14:49:44.275660 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 186, win 115, length 0 14:49:44.275910 IP 192.168.X.6.64627 > cassandra-test.mysql: Flags [S], seq 2336421549, win 8192, options [mss 1351,nop,wscale 2,nop,nop,sackOK], length 0 14:49:44.275921 IP cassandra-test.mysql > 192.168.X.6.64627: Flags [S.], seq 3289359778, ack 2336421550, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0

    Read the article

  • Connect 2 ubuntu computers into a LAN

    - by arsan
    I've got two computers both running Ubuntu and i want to connect them into a LAN so i can ssh from the one into the another - i know how to do the ssh configuration part, i just don't know how to connect them - i put the cable but nothing happened. Please tell me what needs to be done.

    Read the article

  • LAN connection loses network access randomly

    - by bill11
    Hi, Windows 7 is a great OS but there are some problems which should be solved from Microsoft as fast as possible. On my Computer the LAN connection randomly loses its connection. I don't know why but I think this problem depends on my network driver which is only available for Windows XP (where it always worked perfectly). I can not reproduce this issue. Has anybody here had the same problem?

    Read the article

  • Sync file system changes in a folder to server on LAN (via SSH or NFS) automatically

    - by Peter Farsinsen
    Hi, I'm looking for a solution that'll automatically sync file system changes in "/folder1" to "/folder2". Any change should be synced (deleted files, new folders etc.) without any confirmation. Preferably the changes will happen to "/folder2" instantly. "/folder1" is on my hdd "/folder2" is on a server on the LAN (can be accessed via SSH or NFS) I'm on OS X 10.6. I can't seem to find just the right tool. Does anyone

    Read the article

  • Why is my cat5e cable not okay?

    - by torbengb
    My LAN cable seems to work (indicator LED lights up) but the computer can't find a connection. What's wrong? Setup: I had to run a network cable from a router in one room to a computer to another room, through a hole in the wall that was too small to pass the RJ-45 plug through. The plug was cut off and the cable passed through the wall. Then a new plug was crimped on using this detailed explanation. The connection didn't work because the (factory-made!) plug in the other end used a non-standard wire order. I crimped a new plug on again, using the exact same order of the factory-made plug. The LED indicator lights up on both ends, but the computer cannot find a connection. What can be wrong? How can I find out? I don't have a cable tester. By visually inspecting my new plug, I think it's good; the wire order matches the other end, and all wires are all the way inside the plug and reach the connector piece. I've used the cable before (with both factory-made ends) so i don't think that the cable itself has a defect.

    Read the article

  • connect server to server on secondary NIC

    - by microchasm
    Hi, I have a CentOS box with multiple NIC's running Apache. I also have another box running RHEL that will be the MySQL server. I'm trying to use the secondary NIC on the Apache box to connect directly to the MySQL server, but so far no luck. I want to isolate the MySQL box as much as possible which is why I'm going for a direct connection as opposed to running through a switch. I have a crossover cable running between them. IP configs: Apache box eth0 [to lan] ip addr: 192.168.200.100 netmask: 255.255.0.0 gateway: 192.168.111.1 eth1 [to mysql] ip addr: 192.168.200.101 netmask: 255.255.0.0 gateway: [blank] MySQL box eth0 [to apache] ip addr: 192.168.200.203 netmask: 255.255.0.0 gateway: 192.168.200.201 The rest of our network is on 192.168.111.0/24 subnet. Ping only returns Destination Host Unreachable. I've tried various variations of this setup (including straight through cable), and I can't seem to get them to talk to each other. Any help appreciated.

    Read the article

  • How to connect to a computer that is in Sleep mode over the internet

    - by Gerhard Weiss
    How to connect to a computer that is in Sleep mode over the internet? I am using LogMeIn to connect to another computer offsite. I just installed Windows 7 RC on that system and found that the Sleep mode actually works. Currently LogMeIn does not connect when the system is in Sleep mode or Hibernate mode (that is what their error message displays when you try). Is there a way to get LogMeIn to connect to a system in Sleep mode? Is there other software that gives simliar LogMeIn functionallity (like RDP, etc.) that could be used on Windows 7 instead. I just use LMI for connecting and nothing else (no printing or file transfers). A Non-expensive options (such as free) would be better. I have seen web sites mentioning "Wake on LAN". Does anyone have some good links on how to set this up to be accessed over the internet? Edited: It looks like LogMeIn BETA might be the solution. https://beta.logmein.com/welcome/nextgen/ Has anyone tried this beta yet?

    Read the article

  • Need help with local network printing while using VPN on Ubuntu 10.10 desktop

    - by MountainX
    I can print to my HP printer via the LAN when I'm not connected to the VPN. When connected to the VPN, printing fails. OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 I can ping the printer while connected to the VPN: $ ping 192.168.100.12 PING 192.168.100.12 (192.168.100.12) 56(84) bytes of data. 64 bytes from 192.168.100.12: icmp_req=1 ttl=255 time=9.17 ms --- 192.168.100.12 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss... $ ping HpPrinter.local PING HpPrinter.local (192.168.100.12) 56(84) bytes of data. 64 bytes from HpPrinter.local (192.168.100.12): icmp_req=1 ttl=255 time=0.383 ms --- HpPrinter.local ping statistics --- 4 packets transmitted, 4 received, 0% packet loss... But here's the error when I try to print while connected to the VPN: hpijs[9990]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 1... ... hpijs[9990]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 20... hpijs[9990]: io/hpmud/jd.c 780: error timeout mdns lookup HpPrinter.local hpijs[9990]: io/hpmud/jd.c 88: unable to read device-id hp[9982]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 1... ... hp[9982]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 20... hp[9982]: io/hpmud/jd.c 780: error timeout mdns lookup HpPrinter.local hp[9982]: io/hpmud/jd.c 88: unable to read device-id hp[9982]: prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/net/Officejet_Pro_L7600?zc=HpPrinter I am running iptables rules, but the problem doesn't appear related to the firewall. I've tested with no rules (i.e., no firewall). The printing problem happens when the VPN is connected. I can guess it is an mdns problem, but searching google about mdns didn't turn up anything that seemed related to this (at my level of knowledge). Any suggestions?

    Read the article

  • How to create domain or router-level workgroup (dd-wrt micro)

    - by Anthony
    In Windows, is active directory required for using "Domain" instead of "workgroup"? Do I need to register a domain with a DNS provider like godaddy? What I really want to do is set up my home LAN so that everyone connecting to the main router (which is everyone, which is about 30 people) can see each other. I've tried having everyone use the same work group name, still hit or miss. I tried setting the domain name and host name on the router itself, still nothing. I've tried joining the domain name I set instead of work group, and I get an AD error. But ideally, everyone who is connected to the main router should simply just see each other and any shared folders. I've had this problem when I was not the network admin on other large LANs, and I've never been able to figure out why sometimes people disappear or never see each other. I'd really prefer using the native sharing functionality in the OS to setting up an internal FTP or Samba server, etc. Any sure-fire ways to fix this? (maybe an open source clone of AD?) Thanks!

    Read the article

  • Can only ssh when not using wifi

    - by AChrapko
    So I have 3 machines, a windows 7 desktop that is always wired to my router, osX laptop, and raspberry pi running debian linux. My router is a Linksys e1000 wireless N. My goal is to be able to ssh the raspi from any machine, while it is connected via wifi. My problem is that when trying to ssh from either the win7 or osX to the Pi it either times out, or gives an error: "ssh: connect to host 192.168.1.### port 22: No route to host" The only times that I have managed to connect to the pi from any machine were when it connected to the router via an Ethernet cable. Currently with win7 desktop wired, macbook wireless, and pi wireless tests give the following: win7 ping macbook: Destination host unreachable. macbook ping win7: Request timeout. win7 ping pi: Destination host unreachable. macbook ping pi: Request timeout. blah blah blah Plugging the macbook into the router with an Ethernet cable all communication between win7 and macbook works. Pings, ssh, ftp, smb ect... No changes to the pi, still no connections possible to or from any of the other 2 machines. Note All machines, are able to connect to the internet and ssh to the same machine on a completely different network, wired or over wifi. Plugging the Pi in with Ethernet (and macbook still wired) I can ssh to the pi from both win7 and macbook. I can ssh from the pi to macbook. All machines still able to connect the the off network machine. Also another little side note- I was playing warcraft 3 with my roommates the other day, and the only time they were able to see my LAN game was when they were plugged into the router with an Ethernet cable. Once or twice one of the laptops was able to connect over wifi, but not without another computer connecting first via Ethernet. So basically does anyone have any info as to why my router seems to completely ignore local wireless traffic?

    Read the article

  • USB Drive that simultaneously connects to more than one computer

    - by user2499
    Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

    Read the article

  • Arduino IDE not connecting to microcontroller

    - by JDD
    I get this error when trying to connect to an Arduino through a USB serial connection. I'm using the Arduino IDE 1.0.1 and the 64bit version of Ubuntu 12.04. This has been a reoccurring problem since 10.04 and happens to a few other programs that use a serial connection too. I have no problem getting serial data from the Arduino using Python or Screen. The Arduino IDE seems to work just fine otherwise. processing.app.SerialException: Error opening serial port '/dev/ttyACM0'. at processing.app.Serial.<init>(Serial.java:178) at processing.app.Serial.<init>(Serial.java:92) at processing.app.SerialMonitor.openSerialPort(SerialMonitor.java:207) at processing.app.Editor.handleSerial(Editor.java:2447) at processing.app.EditorToolbar.mousePressed(EditorToolbar.java:353) at java.awt.Component.processMouseEvent(Component.java:6386) at javax.swing.JComponent.processMouseEvent(JComponent.java:3268) at java.awt.Component.processEvent(Component.java:6154) at java.awt.Container.processEvent(Container.java:2045) at java.awt.Component.dispatchEventImpl(Component.java:4750) at java.awt.Container.dispatchEventImpl(Container.java:2103) at java.awt.Component.dispatchEvent(Component.java:4576) at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4633) at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4294) at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4227) at java.awt.Container.dispatchEventImpl(Container.java:2089) at java.awt.Window.dispatchEventImpl(Window.java:2518) at java.awt.Component.dispatchEvent(Component.java:4576) at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:672) at java.awt.EventQueue.access$400(EventQueue.java:96) at java.awt.EventQueue$2.run(EventQueue.java:631) at java.awt.EventQueue$2.run(EventQueue.java:629) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:105) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:116) at java.awt.EventQueue$3.run(EventQueue.java:645) at java.awt.EventQueue$3.run(EventQueue.java:643) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:105) at java.awt.EventQueue.dispatchEvent(EventQueue.java:642) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:275) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:200) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:185) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:177) at java.awt.EventDispatchThread.run(EventDispatchThread.java:138) Caused by: gnu.io.UnsupportedCommOperationException: Invalid Parameter at gnu.io.RXTXPort.setSerialPortParams(RXTXPort.java:171) at processing.app.Serial.<init>(Serial.java:163) ... 35 more

    Read the article

  • Com port redirection from Windows 7 to Windows Server 2008 R2

    - by Ola Eldøy
    We use "Copy file.prn to \tsclient\com1" to print from a TS session to a locally attached serial printer. This works fine from Windows XP, but when trying it from a Windows 7 client computer, we get an "Access is denied" error message. And yes, the check box of COM port is selected on the Local Resources tab of the Remote Desktop Connection client. Any pointers? Has anyone even managed to do this successfully?

    Read the article

  • Capturing XEN Dom0 logs on Debian lenny ?

    - by Xavier
    I have a Dell server with Xen 3.2 (from Debian Lenny) running a Debian Lenny dom0. Since I am facing unexpected reboot without any clue in the debian logs, I would like to capture the Xen dom0 logs. Did anybody achieve this and how ? I tried to use the Dell serial port redirection without success.

    Read the article

  • juniper j2300 console connection?

    - by Aceth
    I've been given a Juniper Networks J2300 router, but I've never used a juniper device before and no idea where to begin on how to connect to the console of the device. I have a serial to RJ45 cable but not sure on how to connect to the device. Do I use specific software or just use something like minicom (linux hyperterminal alternative)? I've had a look on the juniper website and couldn't find anything :( Any help would be truly appreciated, cheers

    Read the article

  • USB TO DB9 Adapter

    - by Ioudas
    I have a USB-to-DB9 adapter, no FCC serial visible anywhere, that I need drivers for. I can't seem to get any relevant info searching on Google. Does anyone have any good ideas where I might be able to get a lead on some drivers? I'll even upload a picture of it.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >