Search Results

Search found 17009 results on 681 pages for 'screen orientation'.

Page 241/681 | < Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >

  • Ubuntu 12.04 and Nvidia GTX 550 Ti

    - by Jim
    OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

    Read the article

  • Strange resolution on Ubuntu 11.10

    - by FSchmidt
    I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

    Read the article

  • Desktop goes un-usable after upgrade to 12.04

    - by Tom Nail
    I have multiple Ubuntu systems connected to a KVM, one of which I recently upgraded from Ubuntu 10 to 12.04. After the upgrade, this system desktop does fine until it is allowed to go to idle (i.e., I've switched to another system on the KVM and it locks it's desktop). When I come back to it, the screen is garbled and paging across at a rate seemingly determined by the mouse. Although no pointer is visible, I can get the screen to stop paging (and just be garbled) by moving the mouse left and right. The paging will slow down and come to a stop, if I can align things carefully enough. This condition persists even when I try to go to a CLI-based login (e.g., CTRL+Alt+F1) and will continue until I reboot the machine. Unfortunately, I'm not very familiar with the Unity desktop, so I don't know where to find things to troubleshoot. A restart of lightdm doesn't change anything, so I'm wondering if this might be more hardware based( although this machine hasn't given me any trouble previously in the same setup). The .xsession-errors file has some issues with compiz, nautilus and GConf listed, but I'm not sure those are actually germane to the issue. Thanks for any help, -=Tom

    Read the article

  • ubuntu 12.04 LTS hangs on boot when external monitor is connected

    - by vladeta
    I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

    Read the article

  • Dual monitor setup can cause boot problem?

    - by kriszpontaz
    I have a two monitor setup, one 22" (1680x1050 res., 16:10) and another 19" (1280x1024 res. 5:4). I've installed ubuntu 11.10 beta2 x86, and the installation worked fine, the system boot was successful. I've upgraded ubuntu from the main server, and after restart, booting with the kernel 3.0.0-13, my system hangs up with a purple screen, and than nothing happens (the system boots successful with the kernel image 3.0.0-8). Nvidia current drivers not installed, but if i install it, the situation is the same. I have an Nvidia 9600GT installed. I tried to boot with one screen attached, I've tried each port, but no luck at all. With kernel image 3.0.0-8 the system successfully boots with each display attached, but the farther kernels (3.0.0-11; 3.0.0-12; ect.) all freezes, even one display, or multiple attached. I have two systems with ubuntu installed, and the other (with Ati HD 2400XT, latest closed drivers) don't have any issues like this, I wrote about. Update: The problem solved by reinstalling the operatin system, without automatically installing updates during install, with only one monitor attached. After completing installation, and clean reboot, i've installed closed nVidia drivers. After all, i found it's safe to connect another monitor to the system, it's not causing any problems. Probably the situation stays like this.

    Read the article

  • How to revert to "last known good configuration"

    - by Ripley
    Hi Guys. I failed to install ubuntu 10.04 with WUBI, for some reason it's showing me the root partion is not defined. I'm bored to fight with it so I just removed ubuntu in windows. However this installation made my original Windows XP cripple, a normal boot will end up with a blue screen, error code 7E, I'm still able to boot with the 'last known good configuration' tho. My understanding is booting like this will recover things and I'm supposed to be good when reboot, while this is not the case for me, I have to choose the 'boot from last known good configuration' each and every time to work around the blue screen. Could you suggest how could I resolve this? I feel it's foolish having to waste 10 more seconds each time starting the OS.

    Read the article

  • TraceTune: Larger Files and History

    - by Bill Graziano
    I updated TraceTune over the weekend.  I increased the trace file upload size to 20MB.  We’ve processed over half a million rows of trace data so far and I’m confident this won’t kill the server. I added average CPU and average disk reads to the screen that lists the SQL statements in a trace file. I only added these two.  I’m pretty sure average writes isn’t that import.  I’m still thinking about average duration.  I’m trying to balance showing you what you need with a clean, simple interface.  Plus I have a way to see the averages that I describe further down. TraceTune now keeps the last 10 files that you’ve uploaded and will give you some basic details about each file. I think the last change I made is the most interesting. For each SQL statement, I show the history of that statement. You’ll see each trace file where this statement was found.  It will list the averages for CPU, reads, writes and duration.  This will quickly show you if you’re improving the performance of that query.  In my screen shot above you can that even though the execution counts are very different the averages are consistent. If you want to see what queries are consuming the most resources on your server give TraceTune a try.

    Read the article

  • Windows 8 Metro UI with Multiple Monitors -- Keep in always maximized?

    - by Jersey Dude
    Before installing Win 8 today, my plan was to keep the Metro UI up on my smaller, laptop monitor and have the classic UI running on my two larger monitors. However, in reality, as soon as I click on something in one of the classic UI monitors, the Metro UI minimizes (thus exposing the classic UI in its place). Is there any way to keep the Metro UI from minimizing when I do something in another monitor? Oddly enough, if there is an app running/suspended in the Metro Window, then the Metro UI is not minimized. If the Start screen is currently viewed, clicking in a classic window/monitor switches the Metro UI from the start screen to the last run app. Very peculiar .. Thanks

    Read the article

  • Display Problems running Ubuntu 12.04 in Windows VMware Player

    - by Alex Reynolds
    I am posting this again because I have changed to VMWare Player and I discovered something new. I am running Ubuntu 12.04 LTS (Guest) in VMWare Player 6.0.2 on Windows 7 64-bit Host. I have VMWare Tools installed properly. I am running MATE but the problem persists when I change (to and from) xfce, gnome, mate a-- and back again I had been using this for a couple of years without any graphics issues. After an Ubuntu update (typical) -- my video is corrupt and will not refresh correctly. My desktop icons are "mirrored" and when I open a terminal window (for instance) -- sometimes -- the window appears multiple times. Of course, only one is the real image. It seems to be a refresh problem. When I move an active window around the screen the "older" images "erase" and my icons (for instance) are in the correct location. For instance, I can move the terminal around a pretty corrupted window and the screen behind it is repainted correctly. NEW: Next, I got the idea to try and Remote Desktop in to the Ubuntu 12.04 LTS Guest OS from my Windows 7 64-bit Host. Once working, and connected via Win RDC -- using MATE as default in my /etc/xrdp/startws.sh -- my video is not corrupted and works fine (as in the past). Any ideas about what is going on ? or how to fix this ?

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • how to install Ubuntu on a fresh hard drive

    - by Herman Wiegman
    I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

    Read the article

  • VMware - Watching multiple virtual machine screens

    - by mr.b
    Hi, I don't know even if I put the question right, but here's what I'd like to accomplish. I have avoided specifying exact Vmware virtualization product here because I'm not sure which one would be most suitable for the task at hand. I am developing an application that works in local network. This application has to run on several computers at the same time, and it's important to me, as a developer and tester, to see (literally) how it behaves at all times on all computers. Is there any way to connect to screens of virtual machines deployed on ESX, ESXi, Sever 2.0, or some other product, so that I can see something like grid of screens, say 4x4 or 6x4 or whatever number of scaled screens, at the same time? Ability to interact with screens directly from grid (by double-clicking a screen, for instance, and then getting full resolution screen) would be greatly appreciated, of course. I hope that someone understood what I meant here. :)

    Read the article

  • Xorg crashes ever since using Nvidia dual monitors

    - by legion
    Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • What's the shortest way to post a cropped screenshot on the web?

    - by Borek
    If I want to send someone a piece of my screen this is what I currently do: PrtScr or Alt+PrtScr Open Paint.NET Paste the screen shot Make a selection Crop image to selection Save image to some location - and remember it! Go to some image hosting site (there are plenty of them in the days of Twitter) Click their "Browse" button Browse for the image if I happened to remember the location where I stored it :) Upload the image and obtain the link which I can share This is simply too many steps. I don't usually mind doing steps 1 to 5 but especially steps 6 and 9 are annoying. Jing is pretty close to what I'm looking for but I find their horrible URLs unbearable. If there was something with similar functionality but better or pluggable hosting, that would be great.

    Read the article

  • XNA 2D Spritesheet drawing rendering problem

    - by user24092
    I'm making a tile-based game, using one spritesheet containing all tile graphics. Each tile has a size of 32x32 pixels. The main problem is: when I draw the tile to the screen, if the tile position x and y are not rounded or if scale is activated in spriteBatch.Draw() method (scale != 1.0f), I get some lines of adjacent tiles on the spritesheet into the current tile drawed. I already tried setting SamplerState to PointClamp, removing AntiAlias, but still doesn't work. Here I'll show images of some tests that I made, with a test sprite sheet that I've created (I made a 9x9 spritesheet, with each sprite of size 32x32 containing a unique solid color). Tests: http://img6.imageshack.us/img6/5946/testsqj.png SpriteSheet used: http://imageshack.us/a/img821/1341/tilesm.png Already tried to remove anti-alias, set PointClamp as sampler state, but still getting this issue, XNA keeps drawing part of the adjacent pixels of the texture on the screen. What I want is to get the correct area of the tilesheet texture (as seen in the first test, that gets just the yellow pixels). My question is: Is there any way that I can fix this, WITHOUT adding tile spacing or any other modification involving the tilesheet? Maybe disabling a texture filtering that is done by XNA, or something like that.

    Read the article

  • Domain controller failed to restore using windows backup tools

    - by Peilin
    Domain controller failed to restore using windows backup tools One Issue: One 08 R2 domain controller with fully daily backup(only one controller in this company) is out of services due to hardware issue. The below two methods i tried to recover to the new purchasing server,but it is fail. 1)First Method: Using the windows 2008 R2 CD to boot and carry out recover from backup. Everything is OK, but after reboot it will come out blue screen and restart again. 2)Second Method: a)Install the OS in this new server b) Reboot the server to DSRM. c)Using the Windows Backup Tools to restore the system states only After reboot, it will come out the blue screen error and restart again. I know this is may be the different hardware issue, but how to resolve? Or can we only restore the AD services not whole system status? Any suggestion?

    Read the article

  • My computer will not reboot after fresh install of ubuntu 12.04LTS

    - by user170715
    I bought a new computer yesterday and it came with Windows 8. When installing Ubuntu, i choose the erase and install option thinking that Ubuntu would install easily like it did for my old laptop... After a successful install and following the instructions telling me to reboot to finish installation and remove installation media. It worked and my computer booted fine, however once I began installing updates via update manager and activating additional driver {ATI/AMD proprietary FGLRX graphics driver (post-release updates)} out of the following: Experimental AMD binary Xorg driver and kernel module ATI/AMD proprietary FGLRX graphics driver (*experimental*beta) ATI/AMD proprietary FGLRX graphics driver (post-release updates) Then reboot to finish making changes I reboot and get an error (Reboot and select proper boot device) At this point I was stuck, so I eventually reinstalled ubuntu and repeated the exacted same steps until right before i rebooted to finish making changes. However this time i used this Boot Repair tool sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair After running the program i get a "boot successfully repaired" message. Then I try to reboot again and get the GNU Grub screen where it says would you like to boot: normal recovery memorytest Once it begins loading, you see the code moving across the screen then it pauses when it gets to and doesnt do anything. If someone could tell me how to fix this or get Windows 8 back soon, I'd appreciate it because like i said i just bought it yesterday and now i cant even use it.

    Read the article

  • Creating a 2D perspective in 3D game

    - by Accatyyc
    I'm new to XNA and 3D game development in general. I'm creating a puzzle game kind of similar to tetris, built with blocks. I decided to build the game in 3D since I can do some cool animations and transitions when using 3D blocks with physics etc. However, I really do want the game to look "2D". My blocks are made up of 3D models, but I don't want that to be visible when they're not animating. I have followed some XNA tutorials and set up my scene like this: this.view = Matrix.CreateLookAt(cameraPosition, Vector3.Zero, Vector3.Up); this.aspectRatio = graphics.GraphicsDevice.Viewport.AspectRatio; this.projection = Matrix.CreatePerspectiveFieldOfView( MathHelper.ToRadians(45.0f), aspectRatio, 1.0f, 10000.0f); ... and it gives me a very 3D-ish look. For example, the blocks in the center of the screen looks exactly how I want them, but closer to the edges of the screen I can see the rotation and sides of them. My guess is that I'm not after a perspective field of view, but any help on which field of view/settings to use to get a "flat" look when the blocks aren't rotated would be great!

    Read the article

  • How do I remove a malformed line from my sources.list?

    - by eminencejae
    I have unistalled and reinstalled the Ubuntu Software Center as per info I found in a similar thread and I got the same response about line 91 or something like that. I just tried to upload a screen shot but since I'm new it won't allow me to. I also can not figure out how to cut and paste anything so I have to hand type what the error screen says, both when I attempt to open the software center and nothing happens, when I try to enter commands into the terminal to uninstall, reinstall, whatever I get the same following: COULD NOT INTITIALIZE THE PACKAGE INFORMATION An unresolvable problem occured while initializing the package information Please report t:his bug against the 'update-manager' package and include the following error message: 'E: Malformed line 91 in source list/etc/apt/sources.list (dist parse) E: The list of sources could not be read., E: The package list of status file could not be parsed or opened. How do I report bugs? What can be done about this. I have searched and everything everyone says to do leads me back to the same line error message. So, I don't know how to get to line 91 in the source list; to tell you what it says. Sorry, I'm really new to this. That is what I need is to find out how to get there and fix what it says. I would really like to NOT have to re partition my hard drive and start from scratch, so I'm really looking forward to getting this problem solved. I need to be able to install new software.

    Read the article

  • Same SCSI drive appears multiple times on the controller list

    - by ohad
    Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

    Read the article

  • External Full HD monitor and Virtual Desktop Size

    - by Stefan
    I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

    Read the article

  • bash shell script which adds output of commands

    - by John Kube
    Let's say I have a command called foo which prints a number to the screen when called: $foo 3 Let's also say I have another command called bar which prints another number to the screen when called: $bar 5 I'm looking to write a shell script which will add together the output of foo and bar. How would I do that? (The outputs from the commands are not known ahead of time. They just so happen to have been 3 and 5 the last time they were run. They could have been something else.) Thanks!

    Read the article

  • How to add display resolution fo an LCD in Ubuntu 12.04? xrandr problem

    - by SeregaI
    I am fresh for Ubuntu and Linux in general. I have installed Ubuntu 12.04 and stuck trying to setup correct resolution for my LCD display. The native resolution for the LCD is 1920x1080 here is the output from xrandr: $xrandr Screen 0: minimum 320 x 200, current 1280 x 720, maximum 4096 x 4096 LVDS1 connected 1280x720+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x720 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) Then I create new modeline: $ cvt 1920 1080 60 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync So far so good. then I create new mode using xrandr: $ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync But for some reason that new mode was created for VGA (VGA1) output instead of LCD output (LVDS1): $ xrandr Screen 0: minimum 320 x 200, current 1280 x 720, maximum 4096 x 4096 LVDS1 connected 1280x720+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x720 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 (0xbc) 173.0MHz <---------- ????!!!!!! h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz So, if I try to add mode to LVDS1, I get an error: $ xrandr --addmode LVDS1 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 149 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 25 Current serial number in output stream: 26 Adding that new mode to VGA1 works fine, but I don't use that VGA1 output.

    Read the article

  • Improve performance on Lync desktop sharing

    - by Trikks
    I'm using Lync 2010 server to handle some clients communication and screen sharing. The biggest issue is the performance with screen sharing, it is of rather high quality but the frame rate is very poor. I have been reading and searching a lot on the subject and 95% of all topics is about bandwidth, we have a 200/200 MBit Internet connection solely for this application. Also my test machines runs on an internal gigabit lan. The speeds between all boxes is hysterically fast. Next step was to ensure that there where some profiles for different bandwidths, so i registered some New-CsNetworkBandwidthPolicyProfile -Identity 50Mb_Link -Description "BW profile for 50Mb links" -AudioBWLimit 20000 -AudioBWSessionLimit 200 -VideoBWLimit 14000 -VideoBWSessionLimit 700 New-CsNetworkBandwidthPolicyProfile -Identity 100Mb_Link -Description "BW profile for 100Mb links" -AudioBWLimit 30000 -AudioBWSessionLimit 300 -VideoBWLimit 25000 -VideoBWSessionLimit 1500 Nothing fancy happend here either. Non of the test boxes have anything from Norton installed, they doesn't have any firewalls running (nor does the Lync server), all fences are down in this environment just for the testing. Is there any thing that I may have missed to improve the quality of this? Thanks

    Read the article

  • Architectural approaches to creating a game menu/shell overlay on PC/Linux?

    - by Ghopper21
    I'm am working on a collection of games for a custom digital tabletop installation (similar to Microsoft Surface tables). Each game will be an individual executable that runs full-screen. In addition, there needs to be a menu/shell overlay program running simultaneously. The menu/shell will allow users to pause games, switch to other games, check their game history, etc. Some key requirements of the shell: it intercepts all user input (mainly multitouch) first before passing it on to the currently running game (so that it can, for instance, know to pop-up at a "pause" command); can reveal on arbitrary portions of the screen, with the currently running (but presumably paused) game still showing underneath, ideally with its shape/size being dynamic, to allow for creation of an animated in/out drawer effect over the game. I'm currently looking into different architectural approaches to this problem, including Fraps and DirectX overlays, but I'm sure I'm missing some ways to think about this. What are the main approaches I should be considering? (Note the table is currently being run by Windows PC, but it could potentially be a Linux box instead.)

    Read the article

< Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >