Search Results

Search found 16783 results on 672 pages for 'static typing'.

Page 241/672 | < Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >

• Raspberry pi slows down my entire network

  - by gnusouth

  Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

  Read the article

• Fastest reliable way to open the terminal?

  - by meder

  I actually had my SUPER_L ( left windows key ) binded to gnome-terminal, but for whatever reason ever since upgrading to 9.04 Ubuntu from 8.10 Intrepid it seemed to break the key binding. It was very handy because I could throw open the terminal with one key ( sorry but alt-f2 and typing gnome-terminal isn't practical for me ). Or perhaps it reset all the keybindings? I remember using xev and some gui type interface that was akin to Win32 registry editor. Anyway, I'm curious as to what you guys use to open the terminal.

  Read the article

• Juniper SSG20 IP settings for email server

  - by codemonkie

  We have 5 usable external static IP addresses leased by our ISP: .49 to .53, where .49 is assigned to the Juniper SSG20 firewall and NATed for 172.16.10.0/24 .50 is assigned to a windows box for web server and domain controller .51 is assigned to another windows box with exchange server (domain: mycompany1.com) mx record is pointing to 20x.xx.xxx.51 Currently there is a policy set for all SMTP incoming traffic addressed to .51 forward to the NATed address of the exchange server box (private IP: 172.16.10.194). We can send and receive emails for both internal and external, but the gmail is saying mails from mycomany1.com is not sent from the same IP as the mx lookup however is from 20x.xx.xxx.49: Received-SPF: neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=20x.xx.xxx.49; Authentication-Results: mx.google.com; spf=neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] and the mx record in global dns space as well as in the domain controller .50 for mail.mycompany1.com is set to 20x.xx.xxx.51 My attempt to resolve the above issue is to Update the mx record from 20x.xx.xxx.51 to 20x.xx.xxx.49 Create a new VIP for SMTP traffic addressed to 20x.xx.xxx.49 to forward to 172.16.10.194 After my changes incoming email stopped working, I believe it has something to do with the Juniper setting that SMTP addressed to .49 is not forwarded to 172.16.10.194 Also, I have been wondering is it mandatory to assign an external static IP address to the Juniper firewall? Any helps appreciated. TIA

  Read the article

• port forwarding/network settings preventing from game hosting

  - by Xitcod13

  I asked where to post this question on stackoverflow meta and they directed me here. Im on wireless connection and I want to host games in StarCraft: Brood War and i've been looking everywhere on how to accomplish that. My internet is amazingly fast so its not an internet problem (and when i play other peoples games dont experience lag) I found out that i need to have a static IP but I have already checked that i do (i downloaded a program to make my id static and it already was; The program asked for which router I used So i think it checked the router settings already) I found out that i need to allow Sc access through the firewall which i already did (i have zone-alarm but I allowed it everything possible except receiving emails lol) I have recently noticed that few people actually can join my games but most of them cannot. I dont know whats going on here. I really want to be able to host games overall how do I go about checking what is wrong with the network. Update: Alright I figured out what i did wrong in the first part I did not actually set up forwarding on the router -.- I have tried to fix my mistake. I went to forwarding options in my router (as this guide for my specific router suggests) but when i click ok I get a message incorrect ip address. 192.168.1.1 is my routers address. The default address that appears there is 192.168.1 (blank) I have set it to my computers current Ip4 adress which 192.168.1.23 I hope this works If so i will post it as an answer and mark it.

  Read the article

• How can I get data off of a damaged thumb drive?

  - by Lord Torgamus

  A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  This might seem silly, and if there is no good and practical solution... I will live. I am a programmer and sit at a computer 10 hours a day - and even though the rest of me is nice and warm (at least warm), my fingers are cold as ice. Are there some gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad, so that it vents hot air on the mouse - and that works... But it is not very practical, plus it only works for one hand (and not very well). Tips?

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths?

  Read the article

• Can I set a hyperlink's display text from a document property?

  - by themel

  I'm trying to make a word document customizable through a document property that contains the base URL of all the links. I've managed to make the links themselves reference the document property like this: { HYPERLINK { QUOTE "http://{ DOCPROPERTY Host}/some/path" } } Changing the document property and updating the files makes the hyperlinks point to the correct URL. However, visually, nothing changes - the old URL is still shown as the display text of the hyperlink. Is there a way to make this work? Microsoft docs helpfully state You can edit the display text for the field by typing over it. but I can't figure out how that is supposed to work - even if I manually type over the hyperlink, it includes the edits in the field code instead of adjusting the display text. Currently attempting in Word 2002, but 2010 also available.

  Read the article

• Find and raise a window in KDE4 with shortcut

  - by Andre_112

  Hi all! I was wondering about a possibility to find and raise some window in KDE4 with shortcut. Currently in KDE 4.4 there is a possibility to switch to window from krunner (Alt-F2). Say, I have an open konsole widow somewhere and to switch to it, I can Alt-F2, write konsole and choose konsole window I need from the list. This is great, but too much typing. I would like to have a keyboard shortcut to do the same. Maybe some DBUS magic can do that? Any ideas? Thaks! Andre

  Read the article

• Keyboard layout to shift wasd keys

  - by Joel Coehoorn

  I like to play video games on my computer. One of the things that bugs me, though, is how the wasd keys became the standard movement keys in first person shooters and mmorpgs. To me, esdf makes a lot more sense, because that matches your normal hand placement for typing. "Fixing" that layout is always the first thing I do when installing a new game. Sadly, this is often a pain in the neck, and some games won't let you do it at all. Is there an alternative keyboard layout you can install that will just switch these around, so the wasd keys fall in the esdf positions? And is low-level enough two work with DirectX/DirectInput, perhaps that works with the language bar for easy swapping back and forth?

  Read the article

• Provider claiming "all web servers in the cloud are automatically kept in sync" - should I be skeptical?

  - by RobMasters

  I'm no expert in cloud computing - I've spent a fair bit of time researching it and various providers but am yet to get any hands-on experience with it. From what I've read about AWS and auto-scaling EC2 instances though, it seems as though each instance should be completely decoupled from all other instances. i.e. If content is uploaded to the web server's local filesystem from a custom CMS backend then that content won't be available if subsequently requested from a different web server in the auto-scaling group. Is that right? I met with a representative of our existing hosting provider recently and he was claiming that it isn't a problem that our legacy CMS system is highly dependent on having a local filesystem. He said that all web servers, regardless of how many, would be kept as exact duplicates so I shouldn't notice any difference compared to our existing setup of a single dedicated server. This smells a little too much like bull fecal-matter to me...should I be skeptical about this? I'm a little worried because my (non-technical) boss who ultimately makes the decisions is all for signing up to this cloud solution because it won't require any extra work. I'm sure that they must at least be able to provide this, otherwise they wouldn't be attempting to sell it to us. But at what cost? It sounds as though each web server will always need to be checking the other web server(s) for new static content, which to me sounds like unwanted overhead that'll slow things down. I'd really appreciate it if somebody could clear this up to me. I'm all for switching to AWS and using S3+CloudFront for all static content, but that isn't looking very likely to happen at the moment.

  Read the article

• Language bar switched input types on me.

  - by Elijah

  I learned Japanese, but I'm not native to Japan, so I never had a Japanese keyboard. I used to use the language bar to go back and forth between English and Japanese, simply typing the words in romaji and having windows convert it into either hiragana, katakana and sometimes Kanji. Suddenly, my input type changes. I am no longer able to simply type in English, it changed my keyboard into a native Japanese keyboard, and what's worse it doesn't even allow me to write in hiragana, which I would need way more than katakana. Can anyone tell me how to restore it to the old setting where I simply chose what the output dialect would be, and typed the words phonetically in english and have it translate the sounds for me into japanese characters?

  Read the article

• mod_rewrite adds .html when redirecting

  - by user12093810293812031

  I have a redirect situation where the site is part dynamic and part generated .html files. For example, mysite.com/homepage and mysite.com/products/42 are actually static html files Whereas other URLs are dynamically generated, like mysite.com/cart Both mysite.com and www.mysite.com are pointing to the same place. However I want to redirect all of the traffic from mysite.com to www.mysite.com. I'm so close but I'm running into an issue where Apache is adding .html to the end of my URLs for anything where a static .html file exists - which I don't want. I want to redirect this: http://mysite.com/products/42 To this: http://www.mysite.com/products/42 But Apache is making it this, instead (because 42.html is an actual html file): http://www.mysite.com/products/42.html I don't want that - I want it to redirect to www.mysite.com/products/42 Here's what I started with: RewriteCond %{HTTP_HOST} ^mysite\.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] I tried making the parameters and the .html optional, but the .html is still getting added on the redirect: RewriteCond %{HTTP_HOST} ^mysite\.com$ [NC] RewriteRule ^(.*)?(\.html)?$ http://www.mysite.com/$1 [R=301,L] What am I doing wrong? Really appreciate it :)

  Read the article

• How to identify which website on my instance is receiving lots of traffic?

  - by Bob Flemming

  I am new to server administration and have just setup a new quad core instance which hosts around 15 websites. Over the past couple of days my server load has been averaging at around 15.00. I believe it is because of one (or maybe more) websites are getting spammed by spambots. Typing 'top' at the command line shows many processes from user 'www-data' which indicates lots of web traffic. Is there an easy way identify which one of my sites is taking a hammering? Reading the apache error logs is a very difficult tasks as most of the websites receive daily traffic of 10,000 + unique users. Any help would be appreciated!

  Read the article

• word 2010 Macro to name and Save file when opened

  - by Phillip Clark

  I have a word document template and will be using a hyper link in Excel to access the word file. The issue I need to resolve is making sure once it is opened a message field box is "popped" up asking the user to create a new file name ... (in this case the current date) for each time the file is opened. In the message pop when finished entering in file name they click yes and then the save screen comes up with the path/file type (macro enabled document) and the file name they have already entered in the pop up.. All they should have to do from the save screen is click ok and it saves the file to a certain path/folder on the C drive of the computer. Once they finish typing in their notes they click a active x button to save and close and they are finished. If anyone can help with this it would be fantastic.

  Read the article

• Two keyboards - one qwerty one dvorak. Can windows use both simultaneously?

  - by Alain

  Similar to this question: Is it possible to use multi keyboards with multi keyboard layouts simultaneously? - I have two keyboards plugged in simultaneously. Both are querty keyboards, but I've rearranged the keys on one to be a dvorak layout. I'd like to find some way to configure windows (XP) such that while both keyboards are plugged in, typing on each results in it's respective layout. I'd prefer if there was someway to have the system automatically use the desired layout based on which USB keyboard it is receiving input from. If no such solution is possible, I would settle for a fast way of switching between US English and US English Dvorak languages so that in a pinch I can easily go from one to the other. Thanks.

  Read the article

• 400 error with nginx subdomains over https

  - by aquavitae

  Not sure what I'm doing wrong, but I'm trying to get gunicorn/django through nginx using only https. Here is my nginx configuration: upstream app_server { server unix:/srv/django/app/run/gunicorn.sock fail_timeout=0; } server { listen 80; return 301 https://$host$request_uri; } server { listen 443; server_name app.mydomain.com; ssl on; ssl_certificate /etc/nginx/ssl/nginx.crt; ssl_certificate_key /etc/nginx/ssl/nginx.key; client_max_body_size 4G; access_log /srv/django/app/logs/nginx-access.log; error_log /srv/django/app/logs/nginx-error.log; location /static/ { alias /srv/django/app/data/static/; } location /media/ { alias /wrv/django/app/data/media/; } location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; proxy_set_header Host $http_host; proxy_pass http://app_server; } } I get a 400 error on app.mydomain.com, but the app is published on mydomain.com. Is there an error in my configuration?

  Read the article

• Remote desktop pressing Windows key randomly

  - by wikiti

  When I'm using remote desktop at work from one specific PC it has a quirk which is really quite irritating. I'll be typing away and suddenly the Windows key will be pressed, things start minimising, explorer launches, workstation gets locked (but it locks the remote workstation, so I have that wallpaper in the background, rather than the wallpaper from the local machine as I would expect). I've swapped keyboards, even though it didn't seem to be related to hardware and it made no difference. Done some internet digging and found someone saying it's related to using windows-l to lock the workstation. I've tried to stop myself using that shortcut to see if it helps and have failed miserably :D It's happening to at least one other user remote desktopping from the same machine to a different PC. Reinstalling isn't really an option (I don't admin the PC or I would have tried it, grr), although I could probably get it done if it would definitely resolve the problem. Any ideas?

  Read the article

• KVM virtual machine unable to access internet

  - by peachykeen

  I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

  Read the article

• Easiest way to do host name resolution with IPA?

  - by Luke

  We are currently using static LAN IP addresses for our internal non-public facing servers. We don't have DHCP configured. We're using Vyatta for our router and firewall. The firewall is configured to be zone based. We want to setup IPA for centralized authentication (LDAP+Kerberos). IPA is requiring resolvable host names. I want to avoid having to enter DNS records by hand. What is the most painless way to make host names resolvable that works with IPA in a Linux only environment? We arn't using anything to resolve host names now. Up until now we've been using static ip addresses and local users on each server. We've looked at BIND, DHCP (does that even solve the problem?), and multicast DNS. At this point we're not sure which solution would work best. Is there another option we haven't considered? Security is very important. We have multiple zones where each zone has very specific or no access to another zone. DNS for public domains is forwarded from Vyatta to our ISP's DNS server.

  Read the article

• Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

  - by Samuel Taylor

  I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

  Read the article

• How to disable Spotlight content indexing in Mac OS

  - by o.v.

  From Windows experience, I could always elect Live search to only index file names not their content. Is this something that can be done with Spotlight on a Mac? It used to index absolutely everything, for instance it would return a bunch of video files for any obscure character combination typed into the search field. Right now I've disabled Spotlight entirely as per this answer, but it seems to have disabled searching altogether. For instance, Finder is yet to locate any .pdf files in a small directory as I'm typing this question (unlike windows search which would still be able to work even with indexing disabled) Alternatively, if there is any way (including a trusted third-party app) that will index file names and metadata e.g. ID3 tags that would likely be the preferred option.

  Read the article

• How to handle files that don't need version control in mercurial

  - by richardh

  I am new to mercurial, and for the most part do LaTeX reports and statistical calculations in R using .csv and/or .sqlite files. Re LaTeX, all I really care is the .tex file. Re R, I don't need version control on the .csv or .sqlite files because they are static. When I do 'hg add' for a repo with a .csv and/or .sqlite file, I get a warning like: rev2.sqlite: up to 3070 MB of RAM may be required to manage this file (use 'hg revert rev2.sqlite' to cancel pending addition) So I revert and subsequently use adds like hg add -X *.sqlite. I guess I really have two questions: (1) Should I ignore these warnings? Because these large files are static, can I just add to the repo knowing that the diff files will always be empty and not worry about wasted resources? (2) If I should keep excluding these files from the repo, is there away that I can fix this option? I.E., add to my .hgrc file something that always appends an option like -I *.tex -I *.R to my 'hg add' commands? Thanks!

  Read the article

• Wireless only connects to Google

  - by dmanxiii

  I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

  Read the article

• LighTPD and PHP not working if outside of LightTPD folder

  - by Marco83

  I need to set up a simple web server with PHP on Windows XP that a number of different people will use for local testing. I'm using LightTPD 1.4.30-4-IPv6-Win32-SSL and PHP 5.2. So far I've created this folder structure: tools/ LightTPD/ htdocs/ PHP/ I set up PHP as CGI and the document root as server_root + "/htdocs". It works fine (well, it's slow but I don't want to bother with FastCGI for now :) ). My problem is when I try to put the htdocs outside of LightTPD folder, like this: htdocs/ tools/ LightTPD/ PHP/ I update the document root to server_root + "/../../htdocs" and while static HTML pages work fine, PHP pages stop working (they return a "No input file specified"). I literally just change the document root, I didn't change anything in the php.ini or anywhere else. Please also note that I left all doc_root, user_dir and cgi.force_redirect to the default values in php.ini, and it works when htdocs is inside LightTPD, but not when I move it ouside. Any idea of why it's breaking?? Here's my lightTPD.conf: server.modules = ( "mod_access", "mod_accesslog", "mod_alias", "mod_cgi", "mod_status", ) include "variables.conf" include "mimetype.conf" # THIS WORKS server.document-root = server_root + "/htdocs" # THIS DOESN'T #server.document-root = server_root + "/../../htdocs" server.upload-dirs = ( temp_dir ) index-file.names = ( "index.php", "index.pl", "index.cgi", "index.cml", "index.html", "index.htm", "default.htm" ) server.event-handler = "libev" url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } static-file.exclude-extensions = ( ".php", ".pl", ".cgi" ) server.errorlog = server_root + "/logs/error.log" ######### Options that are good to be but not neccesary to be changed ####### dir-listing.activate = "enable" #### CGI module cgi.assign = ( ".php" => server_root + "/../PHP/php-cgi.exe" ) status.status-url = "/server-status" status.config-url = "/server-config"

  Read the article

< Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >