Search Results

Search found 11587 results on 464 pages for 'pseudo random numbers'.

Page 242/464 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

• When I restart my LXC environment, the container does not re-bind to the IP address

  - by RoboTamer

  The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

  Read the article

• What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

  - by Jason Tan

  Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

  Read the article

• Syncing contacts to iOS device with Exchange

  - by flackend

  I set up a Microsoft Exchange account on my iOS device to sync my Gmail contacts. But Microsoft Exchange is ignoring phone numbers that are labeled as 'iPhone' or 'main'. For example, John Smith: On Mac and Gmail: John Smith main: 123-334-1212 home: 123-330-1002 work: 123-330-8211 iPhone: 123-778-5556 On iOS device (via Exchange sync): John Smith home: 123-330-1002 work: 123-330-8211 I'd like to sync my contacts from my Mac to iCloud and Gmail, but you can't do both: Is there a solution to sync iOS and Gmail contacts without using Exchange? Thanks for any help!

  Read the article

• How does Amarok rip Audio CDs (in Ubuntu Lucid)?

  - by Hanno Fietz

  I'm in the process of moving my CD collection into my Amarok library. Mostly, it works great. Sometimes however, the process just hangs forever. The problem seems to occur at random (i. e. often, but not always at the same disk/track) and the consequences range from none (successful after cancel/retry) to Amarok's internal db becoming completely messed up. I would like to investigate and file a proper bug report or find a fix / workaround, but I don't understand how Amarok does the ripping. When all is working, there's a lame process encoding to a temporary file, which appears in my collection once it's finished. When the process hangs, that lame command is still there, but waiting forever for data on stdin, which seems to come from a third process. That seems to be kio_audiocd, but I don't know whether that's correct and what it's supposed to do. What's going on?

  Read the article

• Recommendations for USB flash drive fast at writing small files

  - by Andrew Bainbridge

  I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

  Read the article

• Load balance between two virtual directories on a single machine running IIS6

  - by Emil Lerch

  I'm trying to simulate a production environment using a single VM. The production environment will have 3 servers behind a load balancer with sticky sessions. Production will be using IIS6. For development, I have no need to distribute load, but I want to make sure the team does not write code that relies on a single-server module. I have been hoping to set up two virtual directories and find some isapi filter to perform some rudimentary software load balancing, but I've been unable to locate anything suitable. isapi_rewrite comes close but there's no ability for a random rewrite. I don't even need sticky sessions since the application does not (in theory) rely on them. Is there something easy/free to do this, or am I stuck with multiple VMs and a NLB setup (which seems like total overkill)?

  Read the article

• I create a JPanel and GridBagLayout within an object but when I get it in the main object, attributes are missing

  - by chickeneaterguy

  public oijoij() { String name = "Jackie"; int priority = 50; int minPriority = 90; setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); setBounds(100, 100, 450, 300); contentPane = new JPanel(); contentPane.setBorder(new EmptyBorder(5, 5, 5, 5)); contentPane.setLayout(new BorderLayout(0, 0)); setContentPane(contentPane); JPanel panel = new JPanel(); GridBagLayout gbc_panel = new GridBagLayout(); gbc_panel.columnWidths = new int[]{0,0,0}; gbc_panel.rowHeights = new int[]{0, 0, 0, 0, 0, 0}; gbc_panel.columnWeights = new double[]{0.0, 0.0, Double.MIN_VALUE}; gbc_panel.rowWeights = new double[]{0.0, 0.0, 0.0, 0.0, 0.0, Double.MIN_VALUE}; panel.setBorder(new LineBorder(new Color(0,0,0),1)); panel.setLayout(gbc_panel); panel.setAlignmentX(Component.LEFT_ALIGNMENT); panel.setMinimumSize(new Dimension(110,110)); panel.setPreferredSize(new Dimension(110, 110)); panel.setSize(new Dimension(110,110)); JLabel lblNewLabel = new JLabel("Process ID:"); GridBagConstraints gbc_lblNewLabel = new GridBagConstraints(); gbc_lblNewLabel.gridheight = 2; gbc_lblNewLabel.insets = new Insets(0, 0, 5, 5); gbc_lblNewLabel.gridx = 0; gbc_lblNewLabel.gridy = 0; panel.add(lblNewLabel, gbc_lblNewLabel); JLabel lblNewLabel_1 = new JLabel(name); GridBagConstraints gbc_lblNewLabel_1 = new GridBagConstraints(); gbc_lblNewLabel_1.gridheight = 2; gbc_lblNewLabel_1.insets = new Insets(0, 0, 5, 0); gbc_lblNewLabel_1.gridx = 1; gbc_lblNewLabel_1.gridy = 0; panel.add(lblNewLabel_1, gbc_lblNewLabel_1); JLabel lblNewLabel_2 = new JLabel("Priority:"); GridBagConstraints gbc_lblNewLabel_2 = new GridBagConstraints(); gbc_lblNewLabel_2.insets = new Insets(0, 0, 5, 5); gbc_lblNewLabel_2.gridx = 0; gbc_lblNewLabel_2.gridy = 2; panel.add(lblNewLabel_2, gbc_lblNewLabel_2); JLabel lblNum = new JLabel(Integer.toString(priority)); GridBagConstraints gbc_lblNum = new GridBagConstraints(); gbc_lblNum.insets = new Insets(0, 0, 5, 0); gbc_lblNum.gridx = 1; gbc_lblNum.gridy = 2; panel.add(lblNum, gbc_lblNum); JLabel lblNewLabel_3 = new JLabel("Min Priority:"); GridBagConstraints gbc_lblNewLabel_3 = new GridBagConstraints(); gbc_lblNewLabel_3.insets = new Insets(0, 0, 5, 5); gbc_lblNewLabel_3.gridx = 0; gbc_lblNewLabel_3.gridy = 3; panel.add(lblNewLabel_3, gbc_lblNewLabel_3); JLabel lblMp = new JLabel(Integer.toString(minPriority)); GridBagConstraints gbc_lblMp = new GridBagConstraints(); gbc_lblMp.insets = new Insets(0, 0, 5, 0); gbc_lblMp.gridx = 1; gbc_lblMp.gridy = 3; panel.add(lblMp, gbc_lblMp); JLabel lblTimeSlice = new JLabel("Time Slice:"); GridBagConstraints gbc_lblTimeSlice = new GridBagConstraints(); gbc_lblTimeSlice.insets = new Insets(0, 0, 0, 5); gbc_lblTimeSlice.gridx = 0; gbc_lblTimeSlice.gridy = 4; panel.add(lblTimeSlice, gbc_lblTimeSlice); Random r = new Random(System.currentTimeMillis()); panel.setBackground(new Color( r.nextInt(255 - 210) + 210, r.nextInt(255 - 210) + 210, r.nextInt(255 - 210) + 210)); } I have accessor methods for the GridBagLayout and the JPanel. When calling the functions in another file, it looks like I just get the JPanel (but without any labels or the layout or other GridBagLayout features). Help?

  Read the article

• Change default settings in MacVim

  - by AeroCross

  I want to do some changes in MacVim to suit my needs. I'm new in it, so stick with me. The basic changes I want to do is to start the program with the following settings: Line numbers activated Top toolbar deactivated Auto-indenting activated I found out that you can write set lines=xx columns=yy to the /Users/USERNAME/.gvimrc file and it will change the default window width-height Also, you can change the color scheme with :colorscheme scheme in that file, too, but I don't know how to change the other settings. I wanna give Vim a try, but the little things (like these) are important.

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• Use Excel Color Scale Formatting with Text

  - by stumpylog

  I use Excel sheets to track the status of tasks through a set of discrete statuses. I'd like to be able to format these automatically, with the start being red, the end being green and progressing through the combination colors in the middle. Status1 (Red) Status2 (More Red than Green) Status3 (More Green than Red) Status4 (Green) The "Color Scales" option under Conditional Formatting seems like it could be made to work, but it wants numbers. So, my question, can it be done? Using conditional formatting or other formulas to achieve the desired affect?

  Read the article

• Strange IIS/Asp.net Exception Message

  - by Element

  I have a standard asp.net 2.0 application running on IIS 6. I have noticed some strange exception messages in the logs. They seem to be caused by random spam bots trying to submit forms. They are strange because the request string is huge and all the exception details in the event manager are messed up, they have been replaced with %21,%22, etc.. as seen in the screen shot. Is this some kind of exploit or just a bug in the asp.net exception handler/logger ? UPDATE: I traced the requests that are causing this strange log event to a bug in IE8 that causes it to request scriptresource.axd?d={html from page} as described in these links: MS Connect SO - Invalid Webresource.axd SO - IE8 Dropping Memory Pages I am still not sure why these requests would break the IIS log event like seen above, they are just long strings of jiberish being sent to the server, maybe someone reading this can shed some light on it.

  Read the article

• Why does a zip file appear larger than the source file especially when it is text?

  - by PeanutsMonkey

  I have a text file that is 19 bytes in size and having compressed the file using zip and 7zip, it appears to be larger. I had a read of the question on Why is a 7zipped file larger than the raw file? as well as Why doesn't ZIP Compression compress anything? but considering the file is not already compressed I would have expected further compression. Attached is a screenshot. EDIT0 I took the example further by creating a file that contained random data as follows dd if=/dev/urandom of=sample.log bs=1G count=1 and attempted to compress the file using both zip and 7zip however there were no compression gains. Why is that?

  Read the article

• Windows Disk I/O Analysis

  - by Jonathon

  It appears that we are having a problem with the disk i/o speed on our Windows 2003 Enterprise Edition server (64-bit). As we were initializing a database that created two 1G tablespaces on 3 different machines, it became obvious that the two smaller machines (each 32-bit Windows 2003 Standard Edition with less RAM) killed the larger machine when creating the files. The larger machine took 10x as long to create the tablespaces than did the other machines. Now, I am left wondering how that could be. What programs or scripts would you guys recommend for tracking down the I/O problem? I think the issue may be with the controller card (all boxes are hardware RAID 10, but have different controller cards), but I would like to check the actual disk I/O speed as well, so I have some hard numbers to work with. Any help would be appreciated.

  Read the article

• Trac FastCGI + Python on dreamhost leaves zombie python running

  - by Katsuke

  Hello there, Recently I installed trac in one of my dreamhost domains. I followed the instructions of http://trac.mlalonde.net/wiki/CreamyTrac and everything worked perfectly. At least i thought that was the case. After a few days, i started to notice that i was getting random 500 pages. I quickly checked the error log, and found a bunch of: [Fri Apr 16 14:35:34 2010] [error] [client *.*.*.*] Premature end of script headers: dispatch.fcgi [Fri Apr 16 14:35:54 2010] [error] [client *.*.*.*] Premature end of script headers: dispatch.fcgi, referer: http://www.trac.****.com/login [Fri Apr 16 16:05:58 2010] [error] [client *.*.*.*] Premature end of script headers: dispatch.fcgi, referer: http://www.trac.****.com/timeline The trac instance has very low traffic so it is possible that this might have been triggered faster if there was more use of it. So next step i went to look at top and am amazed by what i see: (this is NOT exactly what i saw, i just reproduced this from memory) 23730 rl_inst 20 0 44516 15m 4012 S 0.0 0.4 0:00.17 python2.4 23731 rl_inst 20 0 44616 15m 4012 S 0.0 0.4 0:03.17 python2.4 23732 rl_inst 20 0 44116 15m 4012 S 0.0 0.4 0:01.17 python2.4 23733 rl_inst 20 0 44826 15m 4012 S 0.0 0.4 0:04.17 python2.4 23734 rl_inst 20 0 44216 15m 4012 S 0.0 0.4 0:02.17 python2.4 23735 rl_inst 20 0 44416 15m 4012 S 0.0 0.4 0:01.17 python2.4 I opened the trac site again and that changed to this: 23730 rl_inst 20 0 44516 15m 4012 S 0.0 0.4 0:00.17 python2.4 23731 rl_inst 20 0 44616 15m 4012 S 0.0 0.4 0:03.17 python2.4 23732 rl_inst 20 0 44116 15m 4012 S 0.0 0.4 0:01.17 python2.4 23733 rl_inst 20 0 44826 15m 4012 S 0.0 0.4 0:04.17 python2.4 23734 rl_inst 20 0 44216 15m 4012 S 0.0 0.4 0:02.17 python2.4 23735 rl_inst 20 0 44416 15m 4012 S 0.0 0.4 0:01.17 python2.4 28378 rl_inst 20 0 2608 1208 1008 S 0.0 0.0 0:00.00 dispatch.fcgi 28382 rl_inst 20 0 44248 15m 4012 S 0.0 0.4 0:02.19 python2.4 So the dispatch.fcgi was being called correctly and was spawning correctly other python2.4 process. After the IDLE time passed this is the results: 23730 rl_inst 20 0 44516 15m 4012 S 0.0 0.4 0:00.17 python2.4 23731 rl_inst 20 0 44616 15m 4012 S 0.0 0.4 0:03.17 python2.4 23732 rl_inst 20 0 44116 15m 4012 S 0.0 0.4 0:01.17 python2.4 23733 rl_inst 20 0 44826 15m 4012 S 0.0 0.4 0:04.17 python2.4 23734 rl_inst 20 0 44216 15m 4012 S 0.0 0.4 0:02.17 python2.4 23735 rl_inst 20 0 44416 15m 4012 S 0.0 0.4 0:01.17 python2.4 28382 rl_inst 20 0 44248 15m 4012 S 0.0 0.4 0:02.19 python2.4 dispatch.fcgi was gone but the corresponding python2.4 was still there o_O. I had started with 5 sleeping processes of python and after idle time i ended up with 6. I repeated this and found that it kept spawning more and more python2.4, this was indeed what was causing my 500s indirectly. Let me explain my findings. Am on a shared hosting so my processes get killed if they are way too many. So everytime i opened trac 2 new processes spawned and one remained, to the point that dreamhost was killing a random process when i reached my limit. Sometimes killing the python2.4 that actually was rendering the current page. Hence header premature ending, python is gone the .fcgi doesnt know what to do and throws an 500. I found a dirty solution to this. I changed my dispatch.fcgi to contain a line that killed any currently running python2.4 process and then spawn a new one. Since then i dont get any rogues what so ever. But i dont think this is the best solution, calling killall in every fcgi just seems wrong. Anyone has run into this issue and found a cleaner solution? Is there anything that i have overlooked?

  Read the article

• Cork Board Solution to tack things up on top or to the side of a monitor

  - by Bela

  I'm trying to find some sort of physical product that would either go on the top or the side of an lcd monitor and give me space to tape/push-pin/post it note things for myself. In my head I am picturing an extra space above your monitor 6 inches tall that lets you tape/push pin things up in front of you. For random notes and things I want to keep track of, having them on the top/side of my monitor would keep the space on my desk itself clear, and they would be closer to my field of vision. Does something like this exist? Do I need to rig up something myself? EDIT This is the closest thing I can find so far http://www.unplggd.com/unplggd/diy-project/reverse-engineer-how-to-feel-up-your-monitor-048251

  Read the article

• Navigation keys on numeric keypad randomly stop working

  - by Tom Hughes

  Shortly after a restart, the arrow and navigation (Home, End...) keys on my numeric keypad will randomly stop working, and -- regardless of the state of the NumLock -- return only numbers. I notice this the most in browser applications (like this edit box) but the same effect is true on the command line and in desktop applications like Word. I swapped keyboards and now use a Microsoft keyboard (both are USB keyboards) but the same behavior persists. I also tried a clean boot to clean out startup programs but this made no difference. The separate arrow keys and navigation keys between the QWERTY keys and the numeric keypad work fine, but my strong preference (dating back to DOS and MS Flight Simulator) is to use the navigation keys in the numeric keypad.

  Read the article

• How can you test communication on a COM/Serial port?

  - by Andy

  We have a OHAUAS Weighting scales with a COM port. if we connect this to a PC we should be able to get the weight on the computer by sending a command to it. Is there a way to test this? i tried the command line echo "LP" com1 but this does nothing. A small C# application that listens to this port seems to be continuously receive Hexadecimal numbers (2 digits then an enter), however sending a command through this application doesn't give readable results. When i do listen on the port though, the echo "LP" com1 command gives an unavaible error, so sending the command works in cmd. Does anyone have any knowledge on a simple way to test a send and receive on a com port?

  Read the article

• Sharing storage on Linux and Solaris

  - by devlearn

  I'm looking for a solution in order to share a san mounted volume between several hosts running on Linux (RHEL) and/or Solaris (Sparc). Note that I basically need to share a set of directories containing large binary files that are accessed in random R/W mode. I have the following reqs : keep the data on the SAN suitable i/o performances as the software is pretty demanding on IOPS stick to a shared file system as I can't afford a cluster fs (lack of MDS/OSS infrastructure) compression could be really usefull For now I've found only the following candidates : GFS2 , supports Linux only, no compression VxFS , supports Linux and Solaris, compression supported So if you have some suggestions for this list, I'll really welcome them. Thanks in advance,

  Read the article

• Ubuntu 9.10 x86_32 with PAE causes graphics issues, mainly slowness

  - by widgisoft

  I've tried the 64bit version and found I was constantly hitting a brick wall trying to get 32bit stuff to run; I'd previously used PAE on 9.04 without any issues so figured I'd give it a shot. However, on 9.10 it seems PAE or the process of enabling PAE breaks the nvidia drivers/module somewhat as performance is terrible; I can't even enable desktop effects and there's lots of artifacting on random controls. Disabling the pae image and rebooting fixes the issue however I'm then stuck with "only" 2.7Gb of ram and unable to use the full 8gb that's installed. Is there somthing special I need to do when using pae and nVidia drivers or should I be using 64bit and just figure out how to force run 32bit packages? :-p

  Read the article

• Keyboard lights sometimes stay on after PC is powered off. Why?

  - by Vilx-

  Sometimes when I power off my PC some lights on the keyboard stay on. It's pretty random which ones, though I suspect it has something to do with what lights were on just before the shutdown (if I vigorously follow that they are all off while the PC is shutting down then they stay off). Not that this would change anything, but it is annoying. Why does this happen and how can I avoid it? Added: I know that I can turn off the power completely to my computer and it will go off. That's not the point. Actually, I even want my keyboard to have power, because I use it to turn on my computer (the power button on the case is difficult to reach). I just want the lights to go off. Or at least understand why this happens. Oh, and it's a PS2 keyboard.

  Read the article

• ASP.NET High CPU Bringing Servers to their Knees

  - by user880954

  Ok, our new build is having 100% cpu spikes on each server at random intervals. For long durations it make the site totally unresponsive - this will be at peak times as people in different countries log on to the site etc. We've looked at perfmom, memory profilers, CLR profiler, sql profilers, Red gate ants profiler, tried load testing in UAT - but cannot even reproduce the problem. This could mean only thousands of users hitting the live site causes it to happen. One pattern we did notice was that the new code - the broken build - actually uses noticably less threads. We are also using spring for IOC - does this have a bed reputation? To make things worse, we cannot deploy to live due to the business impact - so cannot narrow the problem down to subset of the new features we've added. We truly are destroyed - has anyone got any battle scars that may save us a few lives?

  Read the article

• Flex/PHP/XML data issue

  - by reado

  I have built a simple application in Flex. When the application loads, a GET request is made to the xmlService.php file with parameters "fetchData=letters". This tells the PHP to return the XML code. In Flex Debug I can see the XML data being sent by the PHP to the flex client. What I need it to do is populate the first drop down box (id="letter") with this data, however nothing is being received by Flex. I added an Alert.show() to check what was being returned but when the application runs, the alert is blank. Can anyone help? Thanks in advance. Image: http://static.readescdn.com/misc/flex.gif // Flex <?xml version="1.0" encoding="utf-8"?> <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" width="300" height="300" creationComplete="windowedapplication1_creationCompleteHandler(event)"> <fx:Script> <![CDATA[ import mx.collections.ArrayCollection; import mx.controls.Alert; import mx.events.FlexEvent; import mx.rpc.events.FaultEvent; import mx.rpc.events.ResultEvent; import spark.events.IndexChangeEvent; protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void { var params:Object = {'fetchData':'letters'}; xmlService.send(params); } protected function xmlService_resultHandler(event:ResultEvent):void { var id:String = xmlService.lastResult.data.id.value; //Alert.show(xmlService.lastResult.data.id.value); if(id == 'letter') { letter.dataProvider = xmlService.lastResult.data.letter; letter.enabled = true; } else if(id == 'number') { number.dataProvider = xmlService.lastResult.data.number; number.enabled = true; submit.enabled = true; } else { submit.label = 'No Data!'; } } protected function xmlService_faultHandler(event:FaultEvent):void { Alert.show(event.fault.message); } protected function letter_changeHandler(event:IndexChangeEvent):void { var params:Object = {'fetchData':'numbers'}; xmlService.send(params); } ]]> </fx:Script> <fx:Declarations> <s:HTTPService id="xmlService" url="URL_GOES_HERE" method="POST" useProxy="false" resultFormat="e4x" result="xmlService_resultHandler(event)" fault="xmlService_faultHandler(event)"/> </fx:Declarations> <s:DropDownList x="94" y="10" id="letter" enabled="false" change="letter_changeHandler(event)" labelField="value"></s:DropDownList> <s:DropDownList x="94" y="39" id="number" enabled="false" labelField="value"></s:DropDownList> <s:Button x="115" y="68" label="Submit" id="submit" enabled="false"/> </s:WindowedApplication> // PHP <? if(isset($_POST['fetchData'])) { if($_POST['fetchData'] == 'letters') { $xml = '<data> <id value="letters"/> <letter label="Letter A" value="a"/> <letter label="Letter B" value="b"/> <letter label="Letter C" value="c"/> </data>'; } else if($_POST['fetchData'] == 'numbers') { $xml = '<data> <id value="letters"/> <number label="Number 1" value="1"/> <number label="Number 2" value="2"/> <number label="Number 3" value="3"/> </data>'; } else { $xml = '<data> <result value="'.$_POST['fetchData'].'"/> </data>'; } echo $xml; } else { echo '<data> <result value="NULL"/> </data>'; } ?>

  Read the article

• Windows 7 randomly installs an "Unknown Device"

  - by Amazed

  Rarely (several days to weeks between occurrences,) and seemingly at random, I get a balloon notification from Windows 7 (x64 SP1 Home Premium) that it is installing hardware for me. However, no new hardware has been installed or plugged in! When I click the balloon it doesn't give me any useful information: Looking in the event log, I find this entry: Event ID: 20001 Source: UserPnp Task Category: 7005 Message: Driver Management concluded the process to install driver FileRepository\usb.inf_amd64_neutral_153b489118ee37b8\usb.inf for Device Instance ID USB\VID_0000&PID_0000\6&3AF9A177&0&0060&&02 with the following status: 0x0. It appears to be USB related. My motherboard has both USB 2.0 and 3.0 controllers. My keyboard and mouse are plugged into the 2.0 slots and the data/recharge cable for a tablet (but not the tablet itself) was plugged in to the 3.0 slot. No other USB devices have been attached for several days/reboots. Why is Windows doing this?

  Read the article

• Not enough storage is available to process this command

  - by Mohit

  I am getting this error on almost all of the operations on a Windows 7 pro 32 bit machine. By operations I mean anything I do. Update a repo from subversion. Access a local IIS Site. Copy a big folder. Run an installer.and sometime if I try again. It get solved. I think there is something wrong wit windows7 . I searched around and found posts suggesting to increase IRPStackSize value in registry I did that no Luck. I am using Microsoft Security Essentials Version: 1.0.1961.0 as my antivirus package Once this errors starts popping up. I have to restart and then in after some random time. It starts showing up again. Any help is appreciated. I am losing lot of my time in restarting my system or retrying again and again.

  Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >