Search Results

Search found 12144 results on 486 pages for 'the old toxophilist'.

Page 242/486 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

• Booting a GPT USB key on older BIOS laptop

  - by fonix232

  I have an old HP EliteBook 8530p, which does not support booting from GPT USB (GPT HDDs are fine though). Lately I had the wish to have a fast-to-start OS for browsing, smaller web tasks, etc., so I grabbed a ChromeOS build (latest one by ArnoldTheBat), flashed it on an 8GB flash drive, and popped it in. It did not boot, so I dug deeper and discovered that it actually is GPT, and cannot be converted to MBR. As my laptop does not support UEFI booting from USB (there's a really-really beta UEFI support in the BIOS, but as I said, it only supports GPT hard drives, not USB devices), I'm stuck. Is there any way of booting it, say, another flash drive with a specific boot loader/manager (e.g. Plop)?

  Read the article

• How to connect a wifi router to a cable modem router?

  - by DavidD

  Here's the thing: I have a cable modem router (Thomson TCW710) with wifi-g that I rent from my cable company. I would like to use a wireless-n router (D-Link DIR-655, that I received for free) with it in order to take advantage of the faster wifi. I basically need advice on how to architecture my home network with these two beasts. What configuration should I need to apply on my old and new router to make it all work? The two routers will of course be connected together with a RJ-45 cable.

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• How to bulk mail-enable contacts from AD in Exchange 2007?

  - by George Hewitt

  Hello, We have several thousand 'contacts' setup in AD already for a faxing system. We're migrating to an online fax provider that uses e-mail rather than plain old telephone. So, we've bulk edited all the AD records so that the 'mail' attribute is populated with the right e-mail address in the right format. Now, how do we enable these contacts within Exchange 2007? I've looked through http://technet.microsoft.com/en-us/library/bb684891.aspx but that only seems to talk about manually editing the CSV output to specify the external addresses. AD already knows the external e-mail addresses - I just need the info in Exchange! Any thoughts?

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• backup and file server for 50+ TB of data

  - by a-bomb

  our office wants to build a new server to handle our data, over the last 10 years our data was stored on CDs, DVDs, HDDs but now they want all of it in one place that is attached to the network for everybody in the office to access it. the data is 20TB new data and the rest is old, the important now is to store these 20tb and gradually store the other 30tb over time. so what is the best solution to do ? we thought of getting an hp server and connect it to an external enclosure that either had tape drives or HDDs (we haven;t decided yet) or to get a NAS server and connect it to the hp server. what should we do because this is new for us ...

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• VMware + SQL Server - sqlserver.exe not using both CPU cores

  - by fistameeny

  Hi, I am working on a virtual machine that runs SQL Server Express (as part of Sage Line 50 Manufacturing). The details are as follows: Physical Server (host machine) - Intel Xeon Quad Core 2.1GHz - 4GB RAM - VMDK image stored on RAID-5 500GB SATA drives (7200RPM) - Running Ubuntu 10.04 Server 64 bit - VMware Server 2 Virtual Machine - Windows Small Business Server 2003 - Allocated 2 vCPU's and 2GB RAM - Using 100GB pre-allocated flat VMDK file The problem I have is that there is process that runs in SQL Server that is CPU intensive. On the old physical server that we migrated to the virtual machine from, this would utilise both CPU cores so the sqlserver.exe process would be running 100% on each of the CPU cores. On the virtual machine, it only seems to use one of the two CPU cores, meaning that the process is much slower to run. Question Is there a way to force SQL Server (sqlserver.exe process) to use both of the CPU cores, and distribute it's load between them? Is this a VMware setting that needs changing to allow processes to use both cores?

  Read the article

• How to copy Netscape email

  - by Olav

  I think I have the Netscape mail-directory from old computer, how do I copy it to new computer? (Netscape 7.1 Mail, Thunderbird or Seamonkey). I think I have the files in Olduserbackup\xjuwtwtb.slt\Mail I create a new mail account with server pop.superuser.com, and find a directory with that name in C:\Users\myusername\AppData\Roaming\Mozilla\Profiles\default\ou6umlif.slt\Mail I replace the files with those from the backup, but Netscape still shows pop.superuser.com in its interface. Is there some kind of registry setting somewhere I will have to change?

  Read the article

• How to efficiently dump a huge MySQL innodb database?

  - by Jagbir

  I got an Ubuntu 10.04 production MySQL database server where total size of database is 260 GB while size of root partition is itself 300 GB where DB is stored, essentially means around 96% of / is full and there's no space left for storing dump/backup etc. No other disk is attached to server as of now. My task is to migrate this database to other server sitting in different datacenter. Question is how to do that efficiently with minimum downtime? I'm thinking in line of: Request to attach an extra drive to server and take a dump in that drive. Transfer dump to new server, restore it and make new server slave of existing one to keep data in sync When migration is needed, break replication, update slave config to accept read/write requests and make old server read-only so it won't entertain any write requests and tell app developers to update there config with new IP address for db. What's your suggestions to improve this or any alternate better approach for this task?

  Read the article

• Why does my netbook have more USB controllers than ports?

  - by yodaj007

  My netbook has three USB ports, but when I look in the device manager: Five are listed. Does this matter in the least (or, why are five listed)? The reason I bring this up: See, if I know that two of the devices in the device manager don't actually have physical ports, I can disable then and up that percentage on the other three, correct? I'm constantly being told that my devices can perform faster if I connect them to a USB 2.0 port, but this netbook is less than a year old. Thanks.

  Read the article

• Install wireless router with cable modem - need authentication server?

  - by Paul

  I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

  Read the article

• Install Eclipse / StatET on Debian server for all users.

  - by Joris Meys

  I've manually downloaded, unpacked and installed the latest Eclipse (3.6.1) on a debian server (2.6.26-2-amd64). Eclipse can now be run by all users in our group, but when I tried to install the StatET plugin, I quickly found out that this one was only visible and useable for me. I have a sudo password on my account and a root password. I wondered if sudo eclipse was all I needed to do, but as I'm very new to the whole sysadmin thing (our old one is on "prolonged leave" and currently working in Spain) I rather check before blowing up the server. Any help on how to configure Eclipse for all users simultaneously is very much appreciated.

  Read the article

• Is it possible to FORMAT an external hard disk that has been encrypted using Storagecrypt?

  - by Pandian John

  Basically the big problem is that about 680 GB of data from my Seagate 2 TB Ext HD is lost because I was experimenting with a software called storagecrypt. I used it a few months ago and today I tried it again but i didn't know that the old password is already set in the hard disk when I pressed the encrypt button. I forgot the password which is disappointing. Not to mention that software uses 128 bit AES encryption so there is no way iam going to recover that data. My question is that is it possible to Format my Hard disk which has been encrypted? What i mean is that is it possible to completely wipe the data just like it is newly bought so that I can use my External Hard disk?( I tried to format by right click-- Format. But the size of the disk is shown as 1 MB. Answers would be very much appreciated. Thanks.

  Read the article

• PC won't post after replacing mobo

  - by Dan

  I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

  Read the article

• Minimum Requirements for (open) Solaris?

  - by Electrons_Ahoy

  I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

  Read the article

• What could cause sudden crash of a MySQL 5.0.67 installation?

  - by Alex R

  I have an old Ubuntu 8.10 32-bit with MySQL 5.0.67. There's 5.7GB of data in it and it grows by about 100MB every day. About 3 days ago, the MySQL instance begin dying suddenly and quitely (no log entry) during the nightly mysqldump. What could be causing it? Upgrading MySQL is a long-term project for me, unless there happens to be a specific bug in 5.0.67 then I guess I'll just need to reprioritize. I'm hoping somebody might be familiar with this problem since this is a fairly popular version bundled with Ubuntu 8.10. Thanks

  Read the article

• How can I accurately determine the age of a hard drive?

  - by Todd Stout

  Yes, if it's large, heavy, and only 65 Meg in capacity, you can assume it's ancient. An RLL controller would positively indicate the drive is from antiquity. What about drives that are only 3 or 4 years old? If I know the serial number, make and model is there a public database that indicates a manufacturing date? Update: As trite as this question might seem to some, the hard drive I was looking at that precipitated this question had no obvious manufacturing date stamped on it. I realize that most do. I think the answers given are very useful to myself and others.

  Read the article

• Dreamweaver Files uploaded to Win 2008 server cause login prompt

  - by Lil

  I have a customer who uses a 4 year old version of Dreamweaver to edit her webpages. My hosting reseller account is with a company that uses Windows Server 2008. Every time my customer edits a page and uploads it, I have to set the permissions for that file to be readable, manually from the site's control panel. The customer is furious with me because her files cause the login prompt. I am able to upload files myself that remain readable to the site with both Filezilla and with Frontpage. I am assuming that her Dreamweaver settings are the cause of the problem but I don't have that program myself and don't know what to advise her. Any suggestions?

  Read the article

• Nginx redirect one path to another

  - by SteveEdson

  I'm sure this has been asked before, but I can't find a solution that works. A website has switched CMS services, but has the same domain, how do I set up an nginx rewrite for a single page? E.g. Old Page http://sitedomain.co.uk/content/unique-page-name New page http://sitedomain.co.uk/new-name/unique-page-name Please note, I don't want everything within the content page to be redirected, but literally just the url mentioned above. I have about 9 redirects to set up, non of which fit in a pattern. Thanks! Edit: I found this solution, which seems to be working, except for the fact that it redirects without a slash: if ( $request_filename ~ content/unique-page-name/ ) { rewrite ^ http://sitedomain.co.uk/new-name/unique-page-name/? permanent; } But this redirects to: http://sitedomain.co.uknew-name/unique-page-name/

  Read the article

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• What's the difference between a normal ActiveX killbit update and one for IDX?

  - by Bob

  I'm looking back at some old MS security bulletin for distribution to new clients and when I look at downloads for the last set of MS ActiveX killbits, KB article here, under each platform I see links with the term IDX. For instance there will be an entry that says "For Windows 7 for 32-bit versions" and then one a few rows down that says "For Windows 7 IDX for 32-bit versions". What's the difference between the two? I understand from a little digging that idx is one of the field names for the database that ActiveX controls are stored in, but that's not really helpful.

  Read the article

• Configure fallback redis server

  - by snøreven

  I am using redis as a cache server. Can I somehow configure multiple redis servers, that the cache is fully functional (read/write) even if some of them go offline? I looked into master-slave, but the problem I see there is, that if the master fails, and I allow writes to the slaves, they get overwritten once the master is up again. Now the master just serves the old data. The only solution I could come up was disabling write-to-disc, but that sucks as I loose everything if I have to restart the master. And I guess, slaves wouldn't be synced anymore if the master is gone.

  Read the article

• Minimum size of a boot partition on debian

  - by zebonaut

  I'm setting up an old box with Debian. First etch (4.0), because this is the last version that still had boot floppies, then the box is to be upgraded to lenny (5.0) and squeeze (6.0). Therefore, I will end up having a a couple of different kernel versions in the boot partition. If I don't want to be wasteful and if I end up needing a separate boot partition, how large should it be? I've used 10 MB long ago, but that was woody, and only one kernel in the boot partition, and this seems to be too small for what I want to do now.

  Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >