Search Results

Search found 9128 results on 366 pages for 'hardware infrastructure'.

Page 243/366 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• How do I set up my own proxy server?

  - by NJTechGuy

  This website (abc.com) slowed access from our original IP address. How do I implement my own proxy server to hide my IP while browsing abc.com? Do I need special hardware/software combo to achieve this? If I can generate about 5 proxies and alternate amongst those 5 while browsing abc.com would be awesome. Please suggest. Thanks guys! p.s : I want to know if I can generate proxy IPs of the type 123.34.21.140 prot 80 on my own? I want to use those IP/port combos in my Python scripts (urllib2/set_proxy).

  Read the article

• Should I quit using Ifconfig?

  - by Zhen

  With the servers that mount Infiniband cards, when I use the ifconfig command I have the warning: Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes. Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly. Ifconfig is obsolete! For replacement check ip. Should I quit using ifconfig? It is deprecated in favor of ip command? Or it will be update in the near future.

  Read the article

• Distributed, Parallel, Fault-tolerant File System

  - by Eddified

  There are so many choices that it's hard to know where to start. My requirements are these: Runs on Linux Most of the files will be between 5-9 MB in size. There will also be a significant number of small-ish jpgs (100px x 100px). All of the files need to be available over http. Redundancy -- ideally it would provide the space efficiency similar to RAID 5 of 75% (in RAID 5 this would be calculated thus: with 4 identical disks, 25% of the space is used for parity = 75% efficent) Must support several petabytes of data scalable runs on commodity hardware In addition, I look for these qualities, though they are not "requirements": Stable, mature file system Lots of momentum and support etc I would like some input as to which file system works best for the given requirements. Some people at my organization are leaning towards MogileFS, but I'm not convinced of the stability and momentum of that project. GlusterFS and Lustre, based on my limited research, appear to be better supported... Thoughts?

  Read the article

• Where does linux look for shared libs?

  - by EsbenP

  I am trying to get the ar command on an embedded ARM computer running linux. I want to install debian and openjdk. It is a headless system. This is a custom linux distribution provided by the hardware manufacturer. The debian installer is missing the ar command so i tried copying the binaries from the debian package, but when running ar I get error while loading shared libraries: libbfd-2.18.0-multiarch.20080103.so: cannot open shared object file: No such file or directory libbfd is also in the package. I tried linking it to /lib and /usr/lib but I get the same message when running. What is the best way to get debian and ar on a custom linux distro?

  Read the article

• How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

  - by CT

  I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

  Read the article

• OpenVZ multiple networks on CTs

  - by user6733

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• Converting a DWG/DXF to CSV or Excel

  - by Menno Gouw

  I'm using ZWcad and i need to get the coordinates of hundreds of blocks into a excel sheet or .CSV file so i can import that into the GPS hardware. I know there are plenty of tools for autocad, i probably can even write one myself but as far as ZWcad goes i seem to be out of options. However ZWcad saves to DWG too, and exports to all the other familiar cad extensions. So i was wondering if i would just save the blocks i need to export to a certain file there might be a tool/program to convert that directly into .CSV.

  Read the article

• Single device that can work as tablet and as desktop PC

  - by flow

  I have a macbook pro and an iPad 2. I tried to use iPad 2 for work when I am out of the office but this is not very comfortable since one has to sync documents, not all Os X Lion apps exist for iPad 2 and so on. I think a solution would be a single tablet device that at the office can be connected to some dock station and then I have the equivalent of my macbook, but when I am out of the office I can touch the screen and used the same applications while on the road. As far as I know the iPad 2 does not and will not allow this. Therefore I wonder if you could recommend me another hardware/tablet/etc that could work this way now as of March 2012.

  Read the article

• Debian Linux server hangs after a week or so

  - by Alex Flo

  I have 2 Debian Linux 6.0.4 servers that have a strange behaviour: after 5-7-10 days they hang. By this I mean the servers need to be restarted and before that ping won't answer. I've been struggling with this problem for a couple of months now and here's some thoughts/what I tried without being able to solve the problem. I changed the RAM on a server. Being 2 different servers I doubt that it could be something related to hardware as a 3rd identical server won't have this problem. I logged the server load and when it crashes the load is fine (quite low) I cannot find anything in the server logs, logs are fine till the server freezes. I don't have access to console unfortunately. While I have years of admin experience I have never encountered such an issue and right now I have no idea where else to investigate. If you have an idea of what I could try in order to fix the problem please share it with me:-)

  Read the article

• Why does my screen dim on a desktop installation of Windows 7?

  - by Robert Cartaino

  Periodically, while using my Windows 7 Pro desktop installation, the screen suddenly dims. The brightness is about 75% normal (estimate). It's as if I am in a power-saving mode on a laptop running on batteries. But this is a full desktop installation. I know it is not a hardware glitch or monitor adjustment issue because the Windows cursor is still bright white while everything else goes dim. The Control Panel Power Options have not been changed. They are set to "Balanced [active]" and I have tried restoring the default settings. Flipping through the power and display settings, everything looks "normal." There is no screen saver or power-off-after settings apparent. Rebooting the system resets everything to full brightness but I can't find a way to restore it in Windows or to keep it from happening in the first place. Suggestions?

  Read the article

• How to solve my black screen at boot?

  - by Juanillo

  I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

  Read the article

• Installing 2 DDR3 Sticks in MB with 4 Slots

  - by The Sasquatch

  Hey everyone, I just put together my first system that uses DDR3 memory. The motherboard I got is an ASUS M4A77T/USB3 and it has 4 DDR3 RAM slots. Looking in the manual for the MB it doesn't say anything about how to install the RAM as far as matching the pairs goes. I have 2 4GB sticks of RAM, and whether I put the sticks next to each other (of the 4 RAM slots, there are two blue ones next to each other and 2 black ones next to each other) or space them apart, The BIOS still shows that I have 8GB installed. I have been getting an IRQL_NOT_LESS_OR_EQUAL BSOD error, and have read in some other places that it could be hardware/RAM related. Does the RAM need to go in the A1, A2 slots (different colored but both A), or the A1 B1 slots? (A1 B1 are both the lovely blue color.) Any help would be awesome. THANKS!

  Read the article

• ATI Radeon HD 5970 Display numbering issues

  - by Arindam Sen

  I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

  Read the article

• Recommendation for PCI SATA addon card?

  - by edmicman

  I have a couple of dead PCs from my wife's office that have working SATA HDDs. Sorry, I don't know if they're SATA I or II, just that they're SATA. Unfortunately, all my spare hardware at home is pretty old; all I have is IDE support. I was thinking I could get a PCI addon card on the cheap that would support SATA and put together a budget server of sorts to play with and be able to use those drives. So I've got a couple questions: After some searching it looks like I can get an addon card for ~20 bucks, but it looks like they're all SATA I? Would that matter? It looks like going to SATAII bumps the price up to $40-$60 or so. Are there any recommendations on a card to get?

  Read the article

• XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

  - by Cristina

  I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

  Read the article

• Can I upgrade a Windows 2000 domain to 2008 and demote the 2000 server without clients attached?

  - by techie007

  Hi all, We're planning to replace a Windows 2000 domain controller with a new 2008 DC (new hardware). We've elected to take the route of getting the 2000 domain schema up-to-snuff, join the 2008 server, upgrade it to a DC, and after replication demote the 2000 server (eventually to be taken off-line). The goal being to not have to visit all the workstations, and limited domain down-time. :) We want bring the old server here and do all the backups, Domain prep, migration and role transfers here, and then (hopefully) just plop the new 2008 back in place after it's done, and join the 2000 server back as a member server (so we can then do folder migrations, etc.). Can this server work be done off-site, without the workstations attached? If we do this will anything need to be done to the clients, once the new DC is physically in place, so they contact the new 2008 DC; or will they just 'know' and continue on using the existing domain settings/user profiles, etc.? Thanks in advance! :)

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by user10321

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• How to troubleshoot memory card read?

  - by shinjin

  The built in memory card reader in my laptop mounts SD cards as read-only only. This happens both in Windows 7 and Ubuntu. Most of the time. Ever now an then it works. After a some non-deterministic combination of uninstalling/reinstalling/disabling/enabling of the driver with the mandatory reboots the card reader works for a while. Is there any sane way to troubleshoot if it's an actual hardware problem, or just a matter of drivers? I've tested it with several SD cards, that work just fine in other devices. System: Acer Aspire 8951G, Windows 7-64bit

  Read the article

• Why do some PDFs lag in Adobe Acrobat?

  - by Coldblackice

  I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

  Read the article

• Will disabling NAT on my wireless router cause a performance hit on my DSL router?

  - by user117313

  I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

  Read the article

• Plesk Backup Best Practices?

  - by The MYYN

  My client utilizes Plesk (9.X) for Server Management. We're implementing a custom backup solution, which should include a complete restorable representation of the actual Plesk configuration (Emails, Domains, etc.). We have full access, since it is a dedicated server resembling these steps: Plesk offers some backups, but they do not include the actual content of the (sub-)domains. Browsing the docs and the internet, I haven't found much ideas on that problem. Our target is to have a disaster recovery scenario: Reinstall a clean OS (Ubuntu) from scratch. Install MySQL/PHP and dependencies (since this runs the app) Install a bare plesk Restore all domains + plesk configuration from an archive Continue operations ... Now steps 1, 2, 3 and 5 are trivial. But what are the best practices for step 4? A side questions: Are there any easy-to-use open source apps out there, to create and restore server-images (even on machines with an possible different hardware)? Thanks for your time and input.

  Read the article

• Using Windows 7 XP Mode for games

  - by Josefvz

  Hi all. I have Win 7 (x64) at home and I want to play some old games (specifically Lands of Lore 3, but also some others). This game does not work properly on Win 7, and there are no patches that I'm aware of to fix its issues. Can I use XP Mode to play this game (and other non Win 7 nice games), or is there a better way? I only have one PC and dual booting scares me... (so no to dual booting!) Another question: Will I have full hardware support (full use of my graphics card, etc) when I use DOSbox or a VM? I have decided to go with VirtualBox or vmware, I'll check which one gives the best performance, thanks for your input!

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• TextMate - completion using an external file or file contained in project?

  - by Neil Baldwin

  Does anyone know how to get TextMate to search an external file (or even the files contained in a TextMate "project") with which to perform word completion? I'm coding some stuff on the C64 (using TextMate to write the code) and I have an external file containing labels for all of the hardware registers/kernal routines e.g VIC2InteruptStatus = $D019 It would be really handy to be able to type, say, 'VIC2I' then press the key for word completion and have TextMate find matches in the external library file. Rather than how I'm having to do it at the moment by opening the library file and copy-paste the register names into my code.

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >