Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 243/788 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• Webcam and drivers for it don't work on Win8

  - by Frantumn

  The webcam on my Asus G51Jx doesn't work now that I've upgraded to Windows 8. I've looked on the Asus site, but they don't seem to have drivers for Windows 8 yet. At least on my machine. I've tried - Using the windows 7 drivers, but the installers aren't compatible. - Automatically detecting new hardware with the metro device manager - Automatically detecting new hardware with the classic windows device manager - using all available drivers for my laptop on the Asus site. Does anyone have any ideas that don't revolve around waiting for official release drivers?

  Read the article

• Help with OpenVPN setup on Windows Server 2003

  - by Bill Johnson

  Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

  Read the article

• Disable ALTQ for internal network traffic

  - by javanix

  I currently have a FreeBSD 8.2 media server set up on my LAN that I use to stream my music from. I also have an SSH login that I use to do file transfers to and from this server remotely. I would like to set up ALTQ (and have gotten this working) to limit my outgoing bandwidth from the server for SSH traffic. However, configuring ALTQ this way is also limiting my internal traffic (and thus interfering with my music streaming) since I am only using a single network interface. Can anyone show me how I would use PF and ALTQ to limit outgoing WAN traffic while allowing all internal LAN traffic to go through unhindered? ext_if="eth0" int_if="eth0" altq on eth0 cbq bandwidth 1Mb queue { std, ssh } queue std bandwidth 80% cbq(default) queue ssh bandwidth 20% cbq(ecn) pass out on eth0 proto tcp to port 22 queue ssh eth0 is my LAN interface, my total WAN bandwidth on my cable connection is 1Mb/s, and my internal network is 10/100.

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Monitor ESXi hosts with Nagios

  - by Kyle Brandt

  Does anyone recommend any methods for monitoring ESXi 4.1 hosts with Nagios? I have looked into SNMP but it seems to be in a pretty sorry state. Net-SNMP does not seem to be included and there is a built it SNMP daemon that I set up. However from the standard MIBs there only seems to really be network interface counters and the VMWare MIBs seem quite useless. Right now I am considering SNMP for the interface speed and trying the plugins listed at http://unimpressed.org/post/96949609/monitoring-esxi-performance-through-nagios . Anyone have a better idea? I would like to monitor the hosts directly, not through something like vCenter.

  Read the article

• How to programmatically control slave computer on BIOS level?

  - by PovilasSid

  I want to run some test on hardware level. My goal is to create or find a way to control one computer from another down to BIOS settings changing. For example: Master computer sends a signal for slave to restart and opens BIOS settings dialog. Master computer sends a signal to slave to change BIOS parameters and then restart. Then slave fully boots up master starts up some software on slave. Then software finishes operations cycle continues till certain conditions are met. I know that I am looking for a complex thing but mainly what I need are correct keywords because now I am being flooded by BIOS configurations tutorials. Main concerns: Is it possible without using any custom tailer chip? How can master monitor salve`s hardware activity? How to let master handled more than one slave? How what connections are needed to create this kind of setup? (cables)

  Read the article

• Possible to use DRBD on two ESXi virtualized servers?

  - by chen

  I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

  Read the article

• What does an ACPI BIOS configure during boot?

  - by RJSmith92

  When a PC boots with an ACPI BIOS, what does it exactly do? I understand that the point of ACPI is to allow the OS to control hardware resources and power management but before the OS is loaded does ACPI configure just the devices needed to boot and then let the OS configure the rest? If the OS wants to re-asign hardware resources does it store this information in the ACPI tables so that the next time the system is booted it assigns them how the OS wants? The ACPI driver asks the PCI bus driver (Pci.sys) to enumerate devices on it's bus once the OS is loaded, how are these devices configured whilst the PC is booting when it doesn't have other bus drivers? Any help with any of the above questions would be greatly appreciated. Thanks.

  Read the article

• virtualbox and nginx server_name

  - by Ivan

  I'm trying to configure gitlab running in an Ubuntu 12.04 guest with Windows7 host. I can ssh the guest using port-forwarding and access the nginx server using port redirection (8888 in host is 80 in guest, so localhost:8888 in host gets to the nginx server in the guest), but the server_name in nginx configuration file is giving me trouble. What is the correct listen and server_name that nginx would accept? The guest has the NAT interface at 10.0.2.15 and Host-Only interface at 192.168.56.101, static. Thanks!

  Read the article

• How to setup dhcp3-server to advertise the DNS server the server itself has got from DHCP?

  - by Ivan

  The Ubuntu 10.04 server has eth0 Internet interface configured by means of an ISP's DHCP. At the same time the server has static eth0 LAN interface to which it provides masquerading (NAT) and LAN-internal DHCP service (dhcp3-server). As far as I've understood the manual, I had to hardcode DNS servers to advertise through LAN DHCP with option domain-name-servers in dhcpd.conf. But what if the ISP changes his DNS server IP silently (we use a SOHO-class ISP, so this won't surprise me much)? Can I configure dhcpd to advertise the DNS server the server uses itself, the one gotten by its DHCP client mechanism?

  Read the article

• windows 2000 freezing during large disk write

  - by robert

  We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

  Read the article

• Hyper-V CPU Utilization, Good Tools?

  - by yzorg

  I just learned a ton from this post: Host CPU% doesn't include child VM CPU%, specifically I learned that both the 'host OS' and 'child VM' are siblings within the HyperVisor layer. Are there good utilities for 'watching' the total CPU and other resource counters at the HyperVisor (hardware) layer? I know perfmon (watching special Hyper-V CPU counters) is the standard answer, but I've stayed away from perfmon for ad-hoc monitoring. Is there a good OSS or free tools to 'watch' the resource utilization as I create multiple new VMs running on the server? I'm a developer, so if there aren't any good UI tools to surface this data I'd consider creating one, but only if needed. P.S. My specific scenario is I'm creating new web, SQL and back-end server VMs for new Windows 8 Server and SQL 2012 (entire application stack). I need to monitor them for utilization and know when I need to grow beyond 1 host (I'll need to split the VMs into separate hosts as I hit hardware limits of the 1st host, and diagnose problems).

  Read the article

• Domain controller failed to restore using windows backup tools

  - by Peilin

  Domain controller failed to restore using windows backup tools One Issue: One 08 R2 domain controller with fully daily backup(only one controller in this company) is out of services due to hardware issue. The below two methods i tried to recover to the new purchasing server,but it is fail. 1)First Method: Using the windows 2008 R2 CD to boot and carry out recover from backup. Everything is OK, but after reboot it will come out blue screen and restart again. 2)Second Method: a)Install the OS in this new server b) Reboot the server to DSRM. c)Using the Windows Backup Tools to restore the system states only After reboot, it will come out the blue screen error and restart again. I know this is may be the different hardware issue, but how to resolve? Or can we only restore the AD services not whole system status? Any suggestion?

  Read the article

• How can I setup a Firewall without NAT?

  - by SRobertJames

  We have 16 IP addresses from our ISP, and are setting up a SonicWall Firewall. I'd like to have the SonicWall do NAT for the LAN, but act as a firewall only (no NAT) for the servers which are using some of the 16 addresses. How do I set this up? If I set the WAN's subnet to include the 16 IPs, the SonicWall won't route the traffic to the LAN interface. Should I set the WAN subnet to only include the ones we are dedicating for NAT, and then keep the others on the LAN? Related point: How can I set multiple IP addresses for a SonicWall LAN interface?

  Read the article

• having 2 ip's on a debian 7 box

  - by David

  I just installed Debian Wheezy on my homeserver. I want to assign 2 ip's to it on the same network interface, 1 static ip (eth0) and 1 dynamic ip (eth0:1). I know it doesn't make much sense but I need it to test something. I edited my /etc/network/interfaces to be like this: auto lo eth0 eth0:1 iface lo inet loopback iface eth0 inet static address 192.168.178.240 network 192.168.178.0 netmask 255.255.255.0 broadcast 192.168.178.255 gateway 192.168.178.1 iface eth0:1 inet dhcp when I bring up eth0:1 (ifup eth0:1) I get the following error (eth0 works fine) Bind socket to interface: No such device Failed to bring up eth0:1. is it even possible to have a dynamic and static ip on the same network adapter?

  Read the article

• Connecting via ShrewSoft VPN client means no LAN internet access (Windows 7 64 bit) - any advice please?

  - by iwishiknewmoreaboutnetworking

  I have a Windows 7 64 bit desktop machine which is connected to a LAN. I recently installed ShrewSoft VPN client v 2.1.7 on my machine so that I can connect to a license server hosted by my customer. They are running a Cisco VPN server and I originally tried (unsuccessfully!) to use the Cisco VPN client for Windows 64 bit but the default gateway wasn't being configured correctly after loading in my pcf file. Using ShrewSoft I am able to import the same pcf file, and successfully connect to the machine I need to using the VPN client software. The client machine I need to connect to has IP address 1.52.90.33. The problem is that when I am connected to the customer network using the VPN client application (and after a few minutes) I lose my LAN internet connection. I can only presume that this is because, by default the ShrewSoft VPN client application automatically tunnels all traffic through the VPN connection. I know there is an option to switch off the "Tunnel All" option on the Policy tab of the application and enter a Remote Network Resource (to "Include" or "Exclude") as "Address" and "Netmask" IP addresses however I am not sure what I need to enter here. Here is my ipconfig output before connecting to the VPN (with suffixes blanked out): Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : ***.*** Link-local IPv6 Address . . . . . : fe80::8de3:9dbe:393a:33ba%11 IPv4 Address. . . . . . . . . . . : 150.237.13.17 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 150.237.13.1 Tunnel adapter 6TO4 Adapter: Connection-specific DNS Suffix . : ***.*** IPv6 Address. . . . . . . . . . . : 2002:96ed:d11::96ed:d11 Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301 Tunnel adapter Local Area Connection* 9: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:2cf9:38c4:6912:f2ee Link-local IPv6 Address . . . . . : fe80::2cf9:38c4:6912:f2ee%12 Default Gateway . . . . . . . . . : Tunnel adapter isatap.***.***: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : ***.*** Here is my route print output before connecting to the VPN: =========================================================================== Interface List 11...20 cf 30 9d ec 2a ......Realtek RTL8168D/8111D Family PCI-E Gigabit Ethern et NIC (NDIS 6.20) 1...........................Software Loopback Interface 1 14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 12...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 150.237.13.1 150.237.13.17 2 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 150.237.13.0 255.255.255.0 On-link 150.237.13.17 257 150.237.13.17 255.255.255.255 On-link 150.237.13.17 257 150.237.13.255 255.255.255.255 On-link 150.237.13.17 257 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 150.237.13.17 257 255.255.255.255 255.255.255.255 On-link 12

  Read the article

• Credentials needed for BT line on Netgear router

  - by Bali C

  I have recently bought a new Netgear router to replace my current BTHomeHub as it doesn't support wireless. I did buy a WAP but figured it would be easier to use a router with wireless built in. (It's a modem/router combo). I have got as far as setting up the router on the web interface, but then it asks for a username and password to connect to the net, I can only assume this is for the phone line? I have tried some passwords I could find written down but they don't work, the internet light comes on and then when the creds fail it goes off. I have been on the homehubs web interface and been through all the settings it has to find the credentials it is using which obviously work, but no joy. Is there anything obvious I am missing, or is there a way I can retrieve my settings from my existing router? Any pointers will be very appreciated.

  Read the article

• Clone a Red Hat RAID as part of a disaster recovery plan

  - by Campo

  I am looking for recommendations to clone a Red Hat mirrored raid to a single hard drive located in the same machine. The idea is if the servers hardware ever has an issue we have a similar hardware machine ready to go. All we would have to do is pop in the cloned drive. If the servers RAID ever failed we could just switch to the single drive to maintain uptime and restore the original configuration on the spare server with a backup. This is a restaurant and they are open 7 days a week. We do have time from 12:am to 9:00am to perform the necessary steps for a clone and we talking about under 10 Gigs of information. There is a database on the server. I have looked into Rsync and Clonezilla. But I am just not confident either is capable of completing the task I want. Looking for some suggestions and possibly a step by step if you could be so kind.

  Read the article

• Migrate TFS 2010 Application Tier to another server on the same domain

  - by Liam

  I'm in the process of looking into the possibility of moving our TFS 2010 Application Tier to another server from the one it is on at the moment so that we can repurpose the hardware. I've been looking through the Microsoft Documentation over at http://msdn.microsoft.com/en-us/library/ms404869.aspx, but this assumes that everything is stored on one box (Application and Data tiers). In my setup however, our Data tier is separate to the Application tier and will be staying where it is. I think I should be able to do this but for my own peace of mind, would there be any issues or implications if I merely installed the Application Tier on the new hardware and then connected it to the existing data tier?

  Read the article

• How do I make a backup of a live server?

  - by Jurily

  At my new job, I have a production server with the following qualities: Windows (XP I think), ancient hardware Absolutely vital database No backups whatsoever Everyone in the company has full admin rights, the passwords are stored in a .txt on the global share No installers, except for the OS The machine itself is sitting on a wooden shelf 5 feet above the ground against an external wall with frequent truck traffic on the other side; the shelf is already bent from the constant load Hasn't been rebooted in $DEITY knows how long, my predecessor wasn't even sure if it would survive it UPS is installed, but since everything is hooked up to it, it would last 10 minutes tops No spare parts or hardware budget How do I make a full backup with minimal impact on the server? I'm not sure how close it is to a total meltdown. For all I know, plugging in a USB stick could kill the company, and of course it will be all my fault, since "it was running fine before you touched it". The ideal solution would be a VM, so I have a test environment as well (separate of course).

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• Does Windows notice when a VM is moved around?

  - by Martin

  I'm thinking of migrating a Desktop machine (Windows XP) to a VM solution (VirtualBox or MS Virtual PC). The reason is that I need a new hardware anyways and I don't want to (cannot properly) reinstall all the "business" apps on there. So my plan goes as follows: I'll pull an image of the machine and restore it to a Virtual Machine using Acronis Universal Restore or some other tool that can restore to dissimilar hardware. (The process is largely irrelevant for this question I think.) Once I have this virtual machine properly running I'll move it to a new PC. So the question now is. Are there any caveats wrt. to Windows (XP?) being installed in a VM and the VM machine being moved around on different host computers? Can anything break in the OS inside the VM? Will there be troubles wrt. to Windows activation?

  Read the article

• XCache permission issue

  - by Guilhem Soulas

  I successfully installed XCache on a Linux server where WHM/cPanel is installed too. However when I go to the admin interface it shows me only the cache for the owner of the folder (= a cPanel account). So I copied the admin interface on another cPanel account of the same server and I'm surprised about the memory allocation because it seems to use the memory I set in php.ini for EACH user. So if set the memory size to 64M and I have 10 users, doesn't it mean that XCache can take up to 640M? It's not the behaviour I want because I can't control the memory in that case! I would like to set 64M only for the entire server.

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• How to block all multicast traffic travelling through a Cisco Catalyst 3750

  - by TrueDuality

  Something changed today. I can't seem to track down what, but one of our 3750s decided that it was going to forward all the multicast traffic it saw from the ghost server across every VLAN it has. I've tried writing a simple access group that consists of the following: access-list 100 deny ip any 224.0.0.10 0.0.0.255 access-list 100 permit ip any any I apparently mistakenly assumed that once applied to an interface that it would block all of the multicast traffic on that interface regardless of VLAN. I do not want any multicast traffic flowing through this particular switch to any VLAN or even to stay on the same VLAN beyond this switch. Does anyone have any ideas?

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >