Search Results

Search found 7204 results on 289 pages for 'almost dead'.

Page 244/289 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• Action on each method's return value

  - by RobGlynn

  What I'd like to do is take some action using the value returned by every method in a class. So for instance, if I have a class Order which has a method public Customer GetCustomer() { Customer CustomerInstance = // get customer return CustomerInstance; } Let's say I want to log the creation of these - Log(CustomerInstance); My options (AFAIK) are: Call Log() in each of these methods before returning the object. I'm not a fan of this because it gets unwieldy if used on a lot of classes with a lot of methods. It also is not an intrinsic part of the method's purpose. Use composition or inheritance to layer the log callon the Order class similar to: public Customer GetCustomer() { Customer CustomerInstance = this.originalCustomer.GetCustomer(); Log(CustomerInstance); return CustomerInstance; } I don't think this buys me anything over #1. Create extension methods on each of the returned types: Customer CustomerInstance = Order.GetCustomer().Log(); which has just as many downsides. I'm looking to do this for every (or almost every) object returned, automatically if possible, without having to write double the amount of code. I feel like I'm either trying to bend the language into doing something it's not supposed to, or failing to recognize some language feature that would enable this. Possible solutions would be greatly appreciated.

  Read the article

• Winlibre - An Aptitude-Synaptic for Windows. Would that be useful?

  - by acadavid

  Hi everyone. Last year, in 2009 GSoC, I participated with an organization called Winlibre. The basic idea is having a project similar to Aptitude (or Apt-get) and a GUI like Synaptic but for Windows and just to hold (initially), only open source software. The project was just ok, we finished what we considered was a good starting point but unfortunately, due to different occupations of the developers, the project has been idle almost since GSoC finished. Now, I have some energy, time and interest to try to continue this development. The project was divided in 3 parts: A repository server (which i worked on, and which was going to store and serve packages and files), a package creator for developers, and the main app, which is apt-get and its GUI. I have been thinking about the project, and the first question that came to my mind is.. actually is this project useful for developers and Windows users? Keep in mind that the idea is to solve dependencies problems, and install packages "cleanly". I'm not a Windows developer and just a casual user, so i really don't have a lot of experience on how things are handled there, but as far as I have seen, all installers handle those dependencies. Will windows developers be willing to switch from installers to a packages way of handling installations of Open source Software? Or it's just ok to create packages for already existing installers? The packages concept is basically the same as .deb or .rpm files. I still have some other questions, but basically i would like to make sure that it's useful in someway to users and Windows developers, and if developers would find this project interesting. If you have any questions, feedback, suggestions or criticisms, please don't mind about posting them. Thanks!!

  Read the article

• Huge burst of memory in c# service, what could be the cause?

  - by Daniel

  I'm working on a c# service application and i have this problem where out of no where and for no obvious reason, the memory for the process will climb from 150mb to almost 2gb in about 5 seconds and then back to 150mb. But nothing in our system should be using any where near that amount of memory (so its probably a bug somewhere). It might be a tight while true loop somewhere but the cpu usage at the time was very low so i thought i'd look for other ideas. Now the weirder thing is when i compile the service for 64bit, the same massive burst will occur except it exceeded 10gb of ram (paging most of it) and it just caused lots of problems with the computer and everything running on it. After a while it shuts down but it looks like windows is still willing to give it more memory. Would you have any ideas or tools that i can use in order to find this? Yes it has lots of logging however nothing in the logs stand out as to why this is happening. I can run the service in a console app mode, so my next test was going to be running it in visual studio debugger and see if i can find anything. It only happens occasionally but usually about 10-20 minutes after startup. On 32bit mode it cleans up and continues on like normally. 64bit mode it crashes after a while and uses stupid amounts of memory. But i'm really stumped as to why this is happening!!!

  Read the article

• Strange mod_rewrite problem; Website works partially

  - by Camran

  I have Ubuntu 9.10 Server... I need to get mod_rewrite working... the mod_rewrite module IS LOADED. On my server, the httpd.conf is empty, instead everything (almost) is in a file called apache2.conf. Anyways, I have also read I have to change the AllowOverride None to AllowOverride All in some file... My httpd.conf is empty as you know, but I have a folder called sites-enabled which contains a 000-default file. This is where I have set: AllowOverride All Now my goal as I stated in the last Q is to turn this link: http://mydomain.com/ad.php?ad_id=Bmw_nice_M3_497379462 into this: http://mydomain.com/Bmw_nice_M3_497379462 So as I got an answer in the last Q i inserted this into the htaccess file: Options +FollowSymLinks Options +Indexes RewriteEngine On RewriteCond %{REQUEST_URI} !^/ad\.php RewriteRule ^(.*)$ ad.php?ad_id=$1 [L] Now, this works (no fully) when entering the url manually in the adress bar, but my website isn't working now for some reason. It is like the website is locked down or something, and unless I change AllowOverride to None it will act like that. Any ideas why? Also another note, the links inside the rewritten url doesn't work properly (images are not shown, while some are shown)...

  Read the article

• Why should I prefer OSGi Services over exported packages?

  - by Jens

  Hi, I am trying to get my head around OSGi Services. The main question I keep asking myself is: What's the benefit of using services instead of working with bundles and their exported packages? As far as I know it seems the concept of Late Binding has something to do with it. Bundle dependencies are wired together at bundle start, so they are pretty fixed I guess. But with services it seems to be almost the same. A bundle starts and registers services or binds to services. Of course services can come and go whenever they want and you have to keep track of these chances. But the core idea doesn't seem that different to me. Another aspect to this seems to be that services are more flexible. There could be many implementations for one specific Interface. On the other hand there can be a lot of different implementations for a specific exported package too. In another text I read that the disadvantage of using exported packages is that they make the application more fragile than services. The author wrote that if you remove one bundle from the dependency graph other dependencies would no longer be met, thus possibly causing a domino effect on the whole graph. But couldn't the same happen if a service would go offline? To me it looks like service dependencies are no better than bundle dependencies. So far I could not find a blog post, book or presentation that could clearly describe why services are better than just exposing functionality by exporting and importing packages. To sum my questions up: What are the key benefits of using OSGi Services that make them superior to exporting and importing packages?

  Read the article

• Misaligned Pointer Performance

  - by Elite Mx

  Aren't misaligned pointers (in the BEST possible case) supposed to slow down performance and in the worst case crash your program (assuming the compiler was nice enough to compile your invalid c program). Well, the following code doesn't seem to have any performance differences between the aligned and misaligned versions. Why is that? /* brutality.c */ #ifdef BRUTALITY xs = (unsigned long *) ((unsigned char *) xs + 1); #endif ... /* main.c */ #include <stdio.h> #include <stdlib.h> #define size_t_max ((size_t)-1) #define max_count(var) (size_t_max / (sizeof var)) int main(int argc, char *argv[]) { unsigned long sum, *xs, *itr, *xs_end; size_t element_count = max_count(*xs) >> 4; xs = malloc(element_count * (sizeof *xs)); if(!xs) exit(1); xs_end = xs + element_count - 1; sum = 0; for(itr = xs; itr < xs_end; itr++) *itr = 0; #include "brutality.c" itr = xs; while(itr < xs_end) sum += *itr++; printf("%lu\n", sum); /* we could free the malloc-ed memory here */ /* but we are almost done */ exit(0); } Compiled and tested on two separate machines using gcc -pedantic -Wall -O0 -std=c99 main.c for i in {0..9}; do time ./a.out; done

  Read the article

• Objects leaking immediately from allocation using either new or [[Object alloc] init];

  - by Sam

  While running Instruments to find leaks in my code, after I've loaded a file and populate an NSMutableArray with new objects, leaks pop up! I am correctly releasing the objects. Sample code below: //NSMutableArray declared as a retained property in the parent class if(!mutableArray) mutableArray = [[NSMutableArray alloc] initWithCapacity:objectCount]; else [mutableArray removeAllObjects]; //Iterates through the read in data and populate the NSMutableArray for(int i = 0; i < objectCount; i++){ //Initializes a new object with data MyObject *object = [MyObject new]; //Adds the object to the mutableArray [mutableArray addObject:object]; //Releases the object [object release]; } I get a number of leaks from Instruments terminating at the addition of the 'object' into the 'mutableArray', but also including the allocation of the 'object' and the 'mutableArray'. I don't get it. Not to mention, this is happening on the first call of the enclosing method so the allocation of the NSMutableArray is being hit in the logic block, not the 'removeAllObjects' selector. Lastly, does Core Foundation have a major bug in it that randomly creates CFStrings and mismanages their memory? My code does not even use those, nor do the leaks where they occur have anything to do with my code. Almost all of my applications so far deal with OpenGL (in case anyone knows of a threading issue that arises from trying to synch the backend of the program with the front end of displaying the contents of an NSOpenGLView class or whatever it is).

  Read the article

• Using Visual Studio to make non aspx code-behind pages

  - by rizzle

  I want to build my own "code behind" like pages so that i can have HTML in a HTML file and code in cs file but be able to have Intellesense for the tokens in the HTML file. (i know that's what the .NET page class does, but i want to have something much lighter) EG: in the .html file: <%@ Directive classname="HTMLSnippet" %> <html> <body> <div>[%message%] </body> </html> and in a .cs file public class MyClass : HTMLSnippet { public class MyClass () { snippet.message = "message goes here" } } So my question is how do make the HTMLSnippet class so that it's members are automatically created, and specifically show up in Intellesense as i add tokens to the .html file? I know that .net currently does it by creating the designer.cs file and basically builds a class with all the elements from the page as it goes, and that would work fine but how can i get visual studio to generate that before compiling so that it shows up in Intellesense. Thanks! Clarification I'm not using this as a handler yet, i want to use this to have HTML snippets with tokens be usable in code as an object with properties. so almost like a custom control. I think what i have to do is create a VS add-in that waits for me to type tokens into an .html file then it automatically creates a .cs file with members for each token.

  Read the article

• Open Source Licenses, which one?

  - by sam

  recently I created a java class " Custom Layout Manager ", which I want to make it open-source and distribute it. So it's not really a "product", nor a "complete program". Here's the list of permissions and specifications: You are free to use and modify with some limitations (packages and classes names, should remain the same, if you want another name, extend this class. - The .jar file, project name is ok to change). You don't need to share your modifications. You can't modify and then sell it to others. You can use it as part of your commercial software (For example: It's OK if: you created an instant messaging program, that uses my "Layout", since your "core bussiness" isn't the "Layout", but the msg program. It's NOT OK if: you created another "Layout" by extending it, added some features and sell it.) You can't remove the author's name nor the author's website address. You are free to donate. :D Basically, it's free and it's Ok as you give me credits and don't make money with it. I guess it might be a little bit complex, since you use it "commercially" but cannot sell it separately. I have seeked almost all the licenses, and the closest one was MIT license, but it says that you can sell it, so I don't really want to use this one. Is there any license that fits all these permissions I stated? Thanks.

  Read the article

• huge C file debugging problem

  - by valdo

  Hello all. I have a source file in my project, which has more than 65,536 code lines (112,444 to be exact). I'm using an "sqlite amalgamation", which comes in a single huge source file. I'm using MSVC 2005. The problems arrives during debugging. Everything compiles and links ok. But then when I'm trying to step into a function with the debugger - it shows an incorrect code line. What's interesting is that the difference between the correct line number and the one the debugger shows is exactly 65536. This makes me suspect (almost be sure in) some unsigned short overflow. I also suspect that it's not a bug in the MSVC itself. Perhaps it's the limitation of the debug information format. That is, the debug information format used by MSVC stores the line numbers as 2-byte shorts. Is there anything can be done about this (apart from cutting the huge file into several smaller ones) ?

  Read the article

• need help speeding up tag cloud filter for IE

  - by rod

  Hi All, Any ideas on how to speed this up in IE (performs decent in Firefox, but almost unusable in IE). Basically, it's a tag cloud with a filter text box to filter the cloud. <html> <head> <script type="text/javascript" src="jquery-1.3.2.min.js"></script> <script type="text/javascript"> $(document).ready(function(){ $('#tagFilter').keyup(function(e) { if (e.keyCode==8) { $('#cloudDiv > span').show(); } $('#cloudDiv > span').not('span:contains(' + $(this).val() + ')').hide(); }); }); </script> </head> <body> <input type="text" id="tagFilter" /> <div id="cloudDiv" style="height: 200px; width: 400px; overflow: auto;"> <script type="text/javascript"> for (i=0;i<=1300;i++) { document.write('<span><a href="#">Test ' + i + '</a>&nbsp;</span>'); } </script> </div> </body> </html> thanks, rodchar

  Read the article

• Detecting modifier keys held down during startup in OS/X (or Windows)?

  - by Tom Swirly

  I've searched here and not found any question that really covers this. I have a cross-platform Windows-OS/X application in which I'd like to be able to detect whether modifier keys like shift or control are being held down while the application starts up. We'd like to do this to allow the application to start up without reading its preferences file, in case that somehow gets corrupted (we saw in testing a prefs bug, now fixed, that made the window size 0 by 0, for example). We're using the excellent and comprehensive cross-platform C++ library named Juce. Unfortunately, Juce's master tells me that he believes this is impossible on OS/X at least since you only get keyboard events and there is no way to read the state of the keys unless something changes. Is this true? Or is there some way around this? I'm almost sure I've used Mac programs that used this mechanism to bypass their preferences. Or... stepping up one level... is there another solution to providing the functionality of "run the program but don't read the prefs file" other than "holding a key down while launching the program"? This is consumer software so we can't expect too much from the user. The final solution will end up being a cross-platform one so hints on the Windows side will also be appreciated. Thanks, and be well! I'll report in with progress on my end.

  Read the article

• Can't get the L2TP IPSEC up and running

  - by Maciej Swic

  i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• Automating video generation by adding an intro and a trailing video to the main video

  - by DevDewboy

  I have a video project I am trying to compile. Here is the overview: I have many videos which are 5 minute training sessions - Main video. The Intro Video will be a standard 5 second video that will have the Video title and Author. This will be concatenated to the main video. The Trailing Video will pretty much be a stock video that will be concatenated to the main video and have all the legaleze etc. The Intro Vid will smoothly fade into the main vid as well as when you get to end of the main video it will fade into the Trailing video nicely. The product is a new video with a Intro, Main & Trailer video all in one! The concept is really that simple. In fact I found an example of a person who has solved this and is doing exactly what I want. This solution is a Bash script that takes a config file that has the title, author, etc. and generates the Intro, the Ending and creates the resulting video with them concatenated. I am using Ubuntu 12.04 Server. I have been trying to take this as a sample and just running it with no luck because of incompatibility errors. I even attempted to convert it using .MP4 containers or .MKV. I am running into error after error or incompatibility issues. I went as far as changing out the ffmpeg binary using the 25 Oct 2013 version from http://ffmpeg.gusari.org/static/64bit/ which I like as I don't have to worry about rebuilding the binary. Almost successful but again I have some error which I cannot solve. I know part of the problem is the fact that video production, codecs, formats is a completely new field for me so I am attempting to work through this new territory. Perhaps an expert here has something similar that I can use as a guideline that uses MP4 or h.264 format. Or take the solution above from the URL and make it work with a more up-to-date version of ffmpeg. I will include the script and its parameter file and the output (abbreviated because of limitation) below. Basically as the script stands right now, when run I get the error [matroska,webm @ 0x27bbee0] Read error. This error is return from the 'reasembleVideo' routine from the first ffmpeg command. The following is the Parameter File: #!/bin/bash INPUTFILE="ssh_main.mp4" LOGO="logo.png" LOGOLENGTH="1" SPEAKER="Jason" TITLE="Basic SSH Video" DATE="October 28, 2013" SCENESTART="00:00:01" SCENEDURATION="00:00:09" OUTPUTFILE="ssh_basic_1" } The following is the script I am running. The ${OUTPUTFILE} being used is a small 2 minute video I create in screen-o-matic in MP4 format. Script on PasteBin (too long for Super User post)

  Read the article

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• Can't clone gitosis-admin.git local from my snow leopard server running gitosis

  - by joggink

  I've installed gitosis as described here: http://gist.github.com/264304 One of the things that I had to adjust was to give my git user permissions to use ssh (which I did trough server admin - access - ssh and added the 'git' user). When I ssh from my local machine (mac osx) as the git user, I get this response: PTY allocation request failed on channel 0 bash: gitosis-serve: command not found Connection to 10.0.0.108 closed. Which I think is normal, because in Pro GIT the author says you should get something like this if you try ssh'ing to the server using your git user: PTY allocation request failed on channel 0 fatal: unrecognized command 'gitosis-serve schacon@quaternion' Connection to gitserver closed. So far so good, I think? Now when I try to clone my gitosis-admin.git repository using this command: $git clone [email protected]:gitosis-admin.git I get this: Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ bash: gitosis-serve: command not found fatal: The remote end hung up unexpectedly So after doing some searching, I found an answer here on serverfault claiming I should use ssh:// as protocol for my git clone (which I thought is the default git protocol?) However, when I try: $git clone ssh://[email protected]:gitosis-admin.git This is the response: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: Password: Password: Permission denied (publickey,keyboard-interactive). fatal: The remote end hung up unexpectedly When I type in my own password (because my git user has no password), I get following error: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: bash: git-upload-pack: command not found fatal: The remote end hung up unexpectedly I added my upload-pack location as followed: $git clone -u /usr/local/git/bin/git-upload-pack ssh://[email protected]:gitosis-admin.git I get the error that gitosis-admin.git isn't a git repo... Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: fatal: '[email protected]:gitosis-admin.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly I've been searching for a solution for almost a week now, and every topic I've found on the internet gives no result...

  Read the article

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• No network upsets gnome

  - by Darren Cook

  An issue that has been bothering me for over a year now. My notebook, running ubuntu 10.04, is almost all the time using a wired connection, with static IP address. And a remote DNS server. Network is configured with entries in /etc/network/interfaces and /etc/resolv.conf, rather than whatever the gnome UI tool was (*) But if I'm out, or simply unplug the network cable, a few things get weird. Specifically the gnome-panel stops working - it is still there, but isn't updating. And opening a nautilus window (e.g. to look at files on the local disk) has huge time-outs. By that I mean it will not open the window for something like 30 or 60 seconds; but when it does finally open it I can see the files and it is perfectly usable. Everything else works fine, alt-tab between windows, etc. I use the commandline to find the pid of gnome-panel, kill it, wait a couple of seconds, and it opens up a fresh panel which is normally usable. (Something like 10 minutes later it will have locked/crashed again; the same for the nautilus windows.) I'm guessing this is a DNS issue? Would setting up a local DNS server help? Guess number 2 was related to having a file server mount (samba, though running on another linux box), and symbolic links to files and directories on that file server on my desktop. My question is a bit vague... Does anyone recognize these symptoms, and have a suggestion? Or do you have some troubleshooting suggestions for narrowing down the problem? My /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myhost # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts 127.0.0.1 testsite.local #Other test website URLs here UPDATE: Some timings to open some desktop folder icons. This is after pulling out the network cable. A sub-directory of the desktop took 23 secs to open up. Content appears immediately (just 8 files, it has no further subdirectories). The home directory icon took 12 seconds to open up, but then took about 30 seconds for the files to appear. I closed it and tried again. This time it took 18 seconds to open up, but then 70 seconds before anything appeared. *: I couldn't work out how to use the gnome network tool for my needs, which include 3-4 static IPs for testing virtual hosts locally.

  Read the article

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• Xen won't start after it had been working

  - by Paul Tomblin

  I've been setting up this Debian Stable system with a dom0 and 3 domUs. It was working fine for several days, and I'm almost ready to deploy it to the rack. But last night I shut it down with all three domUs still running for the first time, and today when I started it up, xend won't start. In /var/log/messages, I have: Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: blktapctrl: v1.0.0 Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: Found driver: [raw image (aio)] Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: Found driver: [raw image (sync)] Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: Found driver: [vmware image (vmdk)] Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: Found driver: [ramdisk image (ram)] Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: Found driver: [qcow disk (qcow)] Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: couldn't find device number for 'blktap0' Apr 18 13:01:33 xen-test BLKTAPCTRL[4248]: Unable to start blktapctrl and in /var/log/xen/xend.log, I have this: [2010-04-18 12:46:32 3523] INFO (SrvDaemon:219) Xend exited with status 1. [2010-04-18 13:01:34 4255] INFO (SrvDaemon:331) Xend Daemon started [2010-04-18 13:01:34 4255] INFO (SrvDaemon:335) Xend changeset: unavailable. [2010-04-18 13:01:34 4255] INFO (SrvDaemon:342) Xend version: Unknown. [2010-04-18 13:01:34 4255] ERROR (SrvDaemon:353) Exception starting xend (no element found: line 1, column 0) Traceback (most recent call last): File "/usr/lib/xen-3.2-1/lib/python/xen/xend/server/SrvDaemon.py", line 345, in run servers = SrvServer.create() File "/usr/lib/xen-3.2-1/lib/python/xen/xend/server/SrvServer.py", line 251, in create root.putChild('xend', SrvRoot()) File "/usr/lib/xen-3.2-1/lib/python/xen/xend/server/SrvRoot.py", line 40, in __init__ self.get(name) File "/usr/lib/xen-3.2-1/lib/python/xen/web/SrvDir.py", line 82, in get val = val.getobj() File "/usr/lib/xen-3.2-1/lib/python/xen/web/SrvDir.py", line 52, in getobj File "/usr/lib/xen-3.2-1/lib/python/xen/xend/server/SrvNode.py", line 30, in _ _init__ self.xn = XendNode.instance() File "/usr/lib/xen-3.2-1/lib/python/xen/xend/XendNode.py", line 709, in instance inst = XendNode() File "/usr/lib/xen-3.2-1/lib/python/xen/xend/XendNode.py", line 164, in __init__ saved_pifs = self.state_store.load_state('pif') File "/usr/lib/xen-3.2-1/lib/python/xen/xend/XendStateStore.py", line 104, in load_state dom = minidom.parse(xml_path) File "/usr/lib/python2.5/xml/dom/minidom.py", line 1915, in parse return expatbuilder.parse(file) File "/usr/lib/python2.5/xml/dom/expatbuilder.py", line 924, in parse result = builder.parseFile(fp) File "/usr/lib/python2.5/xml/dom/expatbuilder.py", line 211, in parseFile parser.Parse("", True) ExpatError: no element found: line 1, column 0 [2010-04-18 13:01:34 4253] INFO (SrvDaemon:219) Xend exited with status 1. Any clues as to what might be going wrong?

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• Hyper-V File Server Clustering - at my wit’s end

  - by René Kåbis

  I am at my wit’s end with File Server clustering under Hyper-V. I am hoping that someone might be able to help me figure out this Gordian Knot of a technology that seems to have dead ends (like forcing cluster VMs to use iSCSI drives where normally-attached VHDX drives could suffice) where logic and reason would normally provide a logical solution. My hardware: I will be running three servers (in the end), but right now everything is taking place on one server. One of the secondary servers will exist purely as a witness/quorum, and another slightly more powerful one will be acting as an emergency backup (with additional storage, just not redundant) to hold the secondary AD VM and the other halves of a set of clustered VMs: the SQL VM and the file system VM. Please note, these each are the depreciated nodes of a cluster, the main nodes will be on the most powerful first machine. My heavy lifter is a machine that also contains all of the truly redundant storage on the network. If this gives anyone the heebie-geebies, too bad. It has a 6TB (usable) RAID-10 array, and will (in the end) hold the primary nodes of both aforementioned clusters, but is right now holding all VMs. This is, right now: DC01, DC02, SQL01, SQL02, FS01 & FS02. Eventually, I will be adding additional VMs to handle Exchange, Sharepoint and Lync, but only to this main server (the secondary server won't be able to handle more than three or four VMs, so why burden it? The AD, SQL & FS VMs are the most critical for the business). If anyone is now saying, “wait, what about a SAN or a NAS for the file servers?”, well too bad. What exists on the main machine is what I have to deal with. I followed these instructions, but I seem to be unable to get things to work. In order to make the file server truly redundant, I cannot trust any one machine to hold the only data store on the network. Therefore, I have created a set of iSCSI drives on the VM-host of the main machine, and attached one to each file server VM. The end result is that I want my FS01 to sit on the heavy lifter, along with its iSCSI “drive”, and FS02 will sit on the secondary machine with its own iSCSI “drive” there as well. That is, neither iSCSI drive will end up sitting on the same machine as the other. As such, the clustered FS will utterly duplicate the contents of the iSCSI drives between each other, so that if one physical machine (or the FS VM) goes toes-up, the other has got a full copy of the data on its own iSCSI drive. My problem occurs when I try to apply the file server role within the failover cluster manager. Actually, it is even before that -- it occurs when adding the disks. Since I have added each disk preferentially to a specific VM (by limiting the initiator by DNS hostname, and by adding two-way CHAP authentication), this forces each VM to be in control of its own iSCSI disk. However, when I try to add the disks to the Disks section of Storage within Failover Cluster Manager, the entire process fails for a random disk of the pair. That is, one will get online, but the other will remain offline because it does not have the correct “owner node”. I mean, really -- WTF? Of course it doesn’t have the right owner node, both drives are showing the same node name!! I cannot seem to have one drive show up with one node name as owner, and the other drive show up with the other node name as owner. And because both drives are not “online”, I cannot create a pool to apply to a cluster role. Talk about getting stuck between a rock and a hard place! I’ve got more to add, but my work is closing for the day and I have to wrap things up. I will try to add more tomorrow morning when I get in. My main objective is to have a file server VM on each machine, the storage on each machine, but a transparent failover in case one physical machine fails. Essentially, a failover FS that doesn’t care which machine fails -- the storage contents are replicated equally on each machine. Am I even heading in the right direction?

  Read the article

• Firefox 3.5.6 causes entire computer to freeze

  - by Anthony Aziz

  Here's the situation: Environment: Just installed a fresh copy of Win7 Pro 32-bit to NTFS partition on 750GB SATA drive Hardware: E8400 3GHz ASUS P5QL Pro 4GB DDR2 1066 RAM EVGA 9800 GTX+ Plenty of cooling, no problems with hardware before Data is stored on a separate partition, including My Documents No security software is yet installed No extensions installed yet Problem: While using Firefox, sometimes the entire computer will freeze/hang. I get no mouse or keyboard input, can't CTRL+ALT+DEL, no "not responding" indication, just a static image on my display. My drivers are all up to date as far as I'm aware (I just installed this copy of Windows last week). I first noticed this when trying to install Xmarks. I went to the Xmarks site and tried to install and it would freeze. I managed to get it installed (Safe mode and the Mozilla addon site worked), but when I go to configure it (log in, etc), the computer freezes. I don't think it's a matter of usage time or memory issues, because while testing, I browsed wallpaper galleries for about 30 minutes, sometimes as many as 12-15 tabs open at a time, without issue. Sometimes I won't even try to install Xmarks at it will hang. I can install (some) other extensions, the only one I've tried is download status bar (which works). What I've done to try to fix: Restarted (duh) Windows safe mode Completely remove Firefox and install it to a new directory, according to Mozilla's KB (I haven't tried the profile manager, though I assume this does the same thing, except perhaps more thoroughly) Some BIOS changes, including Power options, disabling oveclocking (it was a modest overclock on the CPU, which has run Win7 beta and RC for almost a year now) Memtest Used another Windows user profile, same tragic results I'm STUCK now, with no idea what to do. I'm using Chrome as my main browser at the moment, but that's not something I want to be stuck with. I like Firefox and want to use it. I'm going to try creating a new profile first. One thing I did notice: I started leaving task manager and performance monitor open when anticipating (but dreading) a freeze. firefox.exe had low CPU and low memory, but it looked like overall disk usage was seeing some spikes on the small graph Performance Monitor gives you. I saw on one blog post a fellow using XP moved his Local Settings directory from a separate drive to his main drive, and that solved it, but I don't think my AppData directory is on my D: drive, and that's on the same physical device anyways. Still, something that might be worth trying. I'd extremely appreciate any help. Thanks very much. I really don't want to reinstall Windows from scratch again :( Anthony Aziz

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >