Search Results

Search found 29560 results on 1183 pages for 'colin fine'.

Page 244/1183 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• Noisy audio recording in Ubuntu Linux

  - by Haresh K Miriyala

  I'm unable to record audio without noise on my Ubuntu laptop . It is not a grounding problem . My windows os is able to record voice without the static noise so, my hardware is fine . I read in the Windows forums that the os has software noise filtering mechanism that's automatically enabled. How do I do the same in Ubuntu? If not, please let me know how to filter the static noise. Any help is appreciated. Thanks!

  Read the article

• Mint 13 no longer using NVidia card after restart

  - by GenericUsrnme

  Here's the story; I bought a new graphics card, along with other parts, about a week ago. I put them in, install new drivers everything's working fine. Now after a restart I boot into some lovely 1024x768 resolution with only one screen on. I check in the NVidia X Server settings to see if my screen was changed there, there's nothing there except Application profiles and nvidia-settings. I check hardinfo to see if the card is actually recognised; VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller]) I don't really know much about the graphics end of things so I'm not sure what I should be doing here to fix this, I don't even know what I should be looking FOR even, so any help is much appreciated! Thanks in advance

  Read the article

• Sharing a mounted Truecrypt volume via Samba

  - by user10492

  Been banging my head against the wall on this one for a while. I have an encrypted (via truecrypt) partition on a drive. In windows, I mount it locally and share it on my local network. I'm trying to do the same in Ubuntu 10.10 but am running into permission issues. The tc volume has funny permissions and I just can't seem to figure out a way to access it (unsecurely of course) over my network. Other non-tc volume shares work just fine. To recap, I mount a truecrypt volume in Ubuntu and set up a samba share as normal. The share shows up on my local network but accessing it gives 'permission denied'. Mounting as a network drive using a password does not seem to work either. Any insight would be greatly appreciated.

  Read the article

• Cursor seems to freeze in the first attempt to type - Unity 3D, 12.04

  - by Denis

  It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 4 to 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Is that what I should expect, or can be fixed or improved? Thanks.

  Read the article

• How much to charge for Wordpress installation?

  - by Jack Duluoz

  I know this isn't properly a technical question but I hope this is ok here. The question is simple: how much should I charge a customer for a Wordpress installation & configuration? Configuration simply means I have to install him a theme (which is not provided by me), various plugins and maybe edit some lines of code here and there to make the whole thing work fine. MORE INFO I don't do this for a living, I'm just doing this for this single customer. He told me he wants to customize some features of the blog which I think will require a bit of code editing, but these will be small modifications, because I already told him that more substantial modifications will be billed separately. I don't know exactly how long will this take, but probably just 1 day for the setup and some more days to adapt the blog to the customer requests which will eventually come up later

  Read the article

• php application deployment to redhat [closed]

  - by Subhash Dike

  I am a .net background person with most of the work with Windows environment and IIS etc. I have been given a task to deploy one php application on RedHat Linux box. All I have is the credentials and the server IP of that box. Can someone help about how to get started creating a new website on Apache 2.0 on redhat box and then putting php code over to that. I do not have physical access to that server as well. I know it's very basis question, but I am in dark for these things. Even if you can point me to some documentation that's fine or else at least the analogy with IIS should also help to certain extent.

  Read the article

• ubuntu 12.04 internet stopped working

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the internet at home anymore. I am only able to access the router, but no internet access. A have a Dell Latitude E6320 with ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via wireless and ethernet. At home, if I try connecting it through Windows it does work fine. I even checked the MAC addess and it's OK. My other laptop, which also runs ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependecies. Anyone can help me please??? I am affraid I will have to reinstall everything...

  Read the article

• Static IP breaks Network connection

  - by Pasquale Tedesco

  I am somewhat new to Linux. I am setting up a Web server and installed Ubuntu server 14.04 on an vSphere ESXi 5.5 host. I am connecting perfectly fine to the internet when using DHCP but when I apply my Static settings I loose the ability to connect to websites. Whats weird is I can Ping google.com but if I try wget gooogl.com it hangs at connecting to google.com (google.com):173.194.43.32:80 and I get "failed: connection refused" But if I am set to DHCP the connection resolves perfectly. Thanks # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 10.1.2.25 gateway 10.1.2.2 netmask 255.255.255.0 search tsig.com dns-nameservers 10.1.2.13 10.1.2.30

  Read the article

• To mount NAS on a Laptop?

  - by deckoff

  So, I bought a NAS, which I configured successfully in /etc/fstab, on mu Kubuntu 10.10 Thinkpad x40. It works just fine when I am at home. A few days I went out with my laptop and the problem is, that when not at home, both suspend and hibernate functions seem forever to work. I commented out the entry on fstab and the laptop started to work as expected. I played with autofs, but it seems just dies at one moment and I cannot access anything. It works for some time, and then just goes off. Is there any consistent way, to make my laptop access the drive when at home and work OK when away? Probably a script that runs at startup, checks if the mount is there and mounts it if available... or a script that umount the drive at suspend|hibernate and loads it back at startup. Any useful ideas?

  Read the article

• Ubuntu 12.04 nVidia TwinView tearing

  - by Andy Turfer

  I'm running Ubuntu 12.04. Today I just purchased a second monitor (I have a Dell U2711 and a 42-inch Sony TV). I'm running the 295.49 proprietary nVidia graphics driver, my graphics card is a GeForce GTX 460. I am not able to activate "xinerama" with "separate X screens", not sure why. I am able to use TwinView. This works, although it results in severe tearing on the Sony TV. It's as though "sync to vblank" isn't working (I have this set in Compiz and in the nVidia settings). If I disable the Dell U2711 and only use the Sony, everything works fine, zero tearing. Is it the case that "sync to vblank" can only work on a single monitor in Ubuntu 12.04? Is there any way to get rid of the tearing on the second monitor in TwinView mode?

  Read the article

• Ubuntu hanging problem

  - by JMearsXS

  I have a problem with ubuntu 12.04 LTS on my custom tower pc in which the OS hangs at specific points:- - live usb with persistence: hangs when mouse appears. - installed to hard disk: hangs after login, logon sound never plays. i am a relative newbie with linux so any terminal output would not make sense to me :) the pc specs are as follows: - MSI MS-7301 Cuba motherboard - 3GB DDR2 RAM (NOT dual channel) - ATI Radeon HD 5450 gfx card the live usb works fine on all other PC's i tried it on. could any one help me ?

  Read the article

• Change the brightness adjustment interval

  - by TreefrogInc

  So whenever I hit my dim/brighten keys on the keyboard, a notification bubble pops up with the screen brightness. All that's fine, but I would like to be able to change how much the brightness changes with each key press. For example, right now it takes just 5 presses to go from the completely dark to the brightest setting. However, I know from the "Brightness/Lock" setting that the screen is capable of much smaller intervals than this. Is there a way to change how much the brightness jumps each time the keys are pressed?

  Read the article

• After reinstalling ATI graphics drivers, my keyboard and mous aren't working anymore

  - by Lifelike27

  On Ubuntu 11.04 I tried to install the open source drivers for my laptops ATI Mobility Radeon 5470M but I messed that up a bit and lost xserver. Now I've managed to solve that problem with this and by downloading the ATI proprietary drivers and install those manually. Now, when Ubuntu loads up I get to the login screen but I can't use my mouse or my keyboard (usb keyboard and mouse doesn't work either). If I use the recovery console, then login with that and then run 'startx'. I can login fine (though Unity doesn't show, the graphics seem to be working because it shows the fading animation of libnotify), but I can't type or move my mouse.

  Read the article

• Why does my RAID configuration with mdadm fail on reboots?

  - by Andy B

  I have been running Ubuntu server on my machine for 2 years and it has worked ok. I would like to speed it up by raiding a few drives. The machine is used to host my Mysql databases internally. using MDADM raid.. I have tried 2 schemes so far with the 3 drives. 2 partitions on each drive 1 for the swap 1 for the O/S both of them turned into drives raid level 5 3 partitions on each drive 1 for the boot 1 for the swap and 1 for the root. The boot I set to raid level1 and the swap and root raid drives were set to level5 Both setup worked fine for about a week, then on a reboot things fall apart. by fall apart I mean I end up with a bunch of hard drive errors on the screen and then get a grub prompt. Why do they fail on reboots? I am eager to understand what I am doing wrong thanks!

  Read the article

• How do I stop Google indexing my main page as https [duplicate]

  - by user2897488

  This question already has an answer here: https:// search results appearing on Google for purely http:// site 2 answers Due to historic reasons, we have things set up so that "www.mydomain.com" redirects to "store.mydomain.com". This has worked perfectly fine until recently, when Google appears to be sending visitors to "https:// www.mydomain.com" which doesn't have an SSL-certificate (and never has). Strangely, its only the first link that goes to "https:// www.mydomain.com", all other links point correctly to "http:// store.mydomain.com". Because there is no certificate on the "www" version, users are getting an error message. How do I make Google revert to pointing the main link at "http:// store.mydomain.com" (or even "http:// www.mydomain.com.") If I remove "https:// www.mydomain.com" from Google webmaster tools, will this also remove the redirected page ("http:// store.mydomain.com)? Thanks.

  Read the article

• Unable to start GRUB2 on Triple boot Macbook Pro with OS X Lion, Windows 7 and Ubuntu

  - by Shravan

  I installed Windows 7 using Bootcamp. Then I created a partition from the empty space in the Windows partition and another 4GB partition for the linux swap using GParted. I installed Ubuntu 12.04 LTS in the the newly created partition from the Windows partition. Now GRUB2 does not load and I can only see the blinking cursor on the top right when selecting "Windows HD" from the 'option' key at the start up. OS X works fine but nothing else. Could someone please help me fix this? I am attaching the boot-info from the boot-repair tool. http://paste.ubuntu.com/1040169/

  Read the article

• Why can't i ping server? VMware set to 'Bridged' loses IP address on 10.04.

  - by Dave

  I have installed a fresh 10.04 server onto a laptop on a home network as a VMware machine and set network connection to 'Bridged: connect directly to the physical network' from within VMware and rebooted the server. It then loses its IP address. 'dhclient eth0' says "No working leases in persistent database - sleeping" DHCP is working fine on the wi-fi router. The laptop is wired to a wireless router and from there wirelessly to a desktop. Desktop and Laptop can ping each other from Windows. I can ping the VM from Windows on the same laptop, but not from the desktop. Strangely ping has started to resolve hostnames to IPv6 addresses and not IPv4. Don't know whether that's connected? A kick in the right direction would be greatly appreciated. I've been an Ubuntu desktkop user for a few years, but new to ubuntu servers.

  Read the article

• LightView: JavaFX 2 real-time visualizer for GlassFish

  - by arungupta

  Adam Bien launched LightFish, a light-weight monitoring and visualization application for GlassFish. It comes with a introduction and a screencast to get you started. The tool provides monitoring information about threads and memory (such as heap size, thread count, peak thread count), transactions (commits and rollbacks), HTTP sessions, JDBC sessions, and even "paranormal activity". In a recently released first part of a tri-part article series at OTN, Adam explains how REST services can be exposed as bindable set of properties for JavaFX. The article titled "Enterprise side of JavaFX" shows how a practical combination of REST and JavaFX together. It explains how read-only and dynamic properties can be created. The fine-grained binding model allows clear separation of the view, presentation, and business logic. Read the first part here.

  Read the article

• How do I install pgAdmin III for postgreSQL 9.2?

  - by Vector

  I have a Windows server that runs postgresql 9.2. I want to hit it using pgAdmin III from my Ubuntu 12.10 workstation box. I installed pgAdmin III from synaptic and also tried direct download from postgreSQL site using software installer. Regardless, I can get only get pgAdmin III for postgresql 9.1. When I run pgAdmin III and point to my server I get an error message telling me that the database is 9.2 and my pgAdmin III is for 9.1, isn't compatible with 9.2. I can access the server itself fine OK from the Ubuntu box - I have Python programs that hit the database with no problems - but I need pgAdmin III for 9.2 running under Ubuntu 12.10. Is it available? Where do I get it?

  Read the article

• Pendrive USB Ubuntu installation - black screen on boot

  - by ubuntico

  I see many posts on this, but no solution. I installed Ubuntu 12.04 on my 16GB USB flash drive using this official link using their tool Universal USB Installer. Installation to USB went fine so I set my laptop to boot from USB and the Ubuntu was recognized. I saw the usual boot screen and I chose option "Run Ubuntu from this USB". The boot process started and after 5-6 seconds the screen goes black and non-responsive. I thought that it hang on X loading so I tried switching to console via Ctrl+Alt+F1-6 but the system did not respond. Why is this happening? Am I doing something wrong? PS. My laptop is HP Pavillion G6

  Read the article

• Backing up bind mounted folders

  - by NahsiN

  My layout is as follows. LVM Setup: /dev/VG/Documents, /dev/VG/Music, /dev/VG/Pictures, /dev/VG/Music, /dev/VG/Documents, etc.... Each of the LVMs is bind mounted to the corresponding folder name in /home/foo. For example, /home/foo/Documents bind mounted to /media/Documents (mount point of /dev/VG/Documents), etc. If I set up deja-dup to just back up my home folder, am I guaranteed that everything from my LVMs will be backed up properly? So let's say I take away my LVMs for some reason and choose to restore an earlier backup. My home folder will contain everything from the LVMs? All my docs, music, vids etc. My intuition tells me everything will be fine but it doesn't hurt to ask the the experts ;). Hope I have made myself clear. Thanks

  Read the article

• not able to boot through pendrive and run set up

  - by Ash

  I have dell inspiron, previously i have install ubuntu 11.10 on my win7 and make it dual boot. but since i want to upgrade my ubuntu version and change the partion spacing, i have delete 11.10 partion directly and extend my hardrive space(windows + ubuntu) at that moment everything is fine. then i have put 12.04 version pendrive in usb boot from usb and install the 12.04 32 bit . it was installed but can't showing dual boot option like 11.10 and my machine directly boot into win7 . so instantly i again delete my 12.04 partion . Now i am able to login into win7 but whenever i put pendrive(12.04) into usb drive i am facing error of "grub rescue" even though i try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " i have reinstall win7 and reformat all partion still i am facing same error :( i need help badly.

  Read the article

• No sound on fresh install of 13.10

  - by Totalnon

  I installed a new copy of 13.10 today and cannot get my audio to work. Speakers test good on other devices, enabled in the BIOS, worked this morning in a Windows environment. I ran all of the available updates through apt-get. aplay -l lists my card (which tells me Ubuntu recognizes the hardware, I have been looking around the web and trying various things to no avail. Pulse folder permissions seem fine, I've reinstalled ALSA, and the card shows both digital and analog in the system settings sound section. I have tried this guide: Sound Troubleshooting Guide As well as looked through these forums under the tags sound and 13.10 Anyone have any ideas that may help me?

  Read the article

• How to fix Bluetooth Sound in Ubuntu 11.10

  - by Cerin

  Bluetooth sound worked perfectly for me in Ubuntu 10.04. I recently upgraded to 11.10, and although sound in general works fine, Bluetooth sound almost never works. My headset is paired, and Sound Settings shows it's selected as the output device, but no sound is being output. I've tested the headset with other devices, and confirmed it still works, so the issue is definitely with 11.10. I'm not seeing any explicit errors and I can't find any similar issues with 11.10 through Google. I tried restarting the bluetooth service, but that had no effect. What can I do to fix this?

  Read the article

• How do I find the angle required to point to another object?

  - by Ginamin

  I am making an air combat game, where you can fly a ship in a 3D space. There is an opponent that flies around as well. When the opponent is not on screen, I want to display an arrow pointing in the direction the user should turn, as such: So, I took the camera location and the oppenent location and did this: double newDirection = atan2(activeCamera.location.y-ship_wrap.location.y, activeCamera.location.x-ship_wrap.location.x); After which, I get the position on the circumferance of a circle which surrounds my crosshairs, like such: trackingArrow.position = point((60*sin(angle)+240),60*cos(angle)+160); It all works fine, except it's the wrong angle! I assume my calculation for the new direction is incorrect. Can anyone help?

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >