Search Results

Search found 34688 results on 1388 pages for 'default document'.

Page 244/1388 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• Excel 2007 VBA macros don't work in Parallels

  - by MindModel

  I've got a complex Excel spreadsheet I need to use at work. My colleagues use the spreadsheet on Windows PC's, with no special configuration required. I want to run it on a MacBook Pro running Snow Leopard. The spreadsheet contains VBA macros which connect to external Oracle db's over the Internet. If I understand correctly, Excel on the Mac doesn't run VBA macros, so I have to use Parallels. I installed Parallels on the Mac and it's running correctly, as far as I can tell. I installed Excel 2007 under Parallels. I can open the Excel spreadsheet in Parallels and click buttons in the spreadsheet to run macros, but the macros fail with compiler errors. I don't have the password to the source code for the VBA macros, and if possible, I don't want to dig in to the code at that level. I know that there are quite a few things that could go wrong, and examining the VBA code might help, but I'm hoping to solve the problem without going down that road. The spreadsheet runs without any special configuration on Windows, so I'm wondering if anyone out there knows of any limitations of Excel VBA macros under Parallels, or anything else I could do to get this spreadsheet working. It's the only thing that's keeping me from using this MacBook Pro at work. Here is the error message: Compile error in hidden module: clsXXXXx0020Toolx0020Ser. This error commonly occurs when code is incompatible with the version, platform, or architecture of this application. Click Help for more info. Compile error in hidden module: A protected module contains a compilation error. Because the error is in a protected module it cannot be displayed. This error commonly occurs when code is incompatible with the version or architecture of this application (for example, code in a document targets 32-bit Microsoft Office applications but it is attempting to run on 64-bit Office). This error has the following cause and solution: Cause of the error: The error is raised when a compilation error exists in the VBA code inside a protected (hidden) module. The specific compilation error is not exposed because the module is protected. Possible solutions: If you have access to the VBA code in the document or project, unprotect the module, and then run the code again to view the specific error. If you do not have access to the VBA code in the document, then contact the document author to have the code in the hidden module updated.

  Read the article

• How to VPN on demand Mac OS X?

  - by Kami

  I'm trying to configure the Snow Leopard's VPN on demand service without success I've tried the following domain+configuration pairs but none of them have worked: domain.net default *.domain.net default My goal is that each time I go to www.domain.net with Safari, ssh server1.domain.net or everything else on this domain.net the connection will be established trough the VPN ! I've tried plenty of different configs but it has never worked so far... Edit : R

  Read the article

• can not print pdfs with adobe reader 9

  - by aicad

  When I try to print an adobe acrobat document I get a message box that says "the document could not be printed." I then get another message box that says "there were no pages selected to print." The sender could print it. Other users on same computer are unable to print their docs but I can print from WORD. AHHHHH

  Read the article

• Resizing pages in Adobe Acrobat Pro

  - by KP

  I am using Acrobat Professional 8 to assemble a document from two imported page images (JPGs). Acrobat seems to interpret the images at screen resolution, and creates a document that's about 35" by 46" instead of 8.5" x 11". How can I scale down the page size within Acrobat?

  Read the article

• Virtualhosts, maintain existing applications

  - by savageguy

  I host several applications by IP in subfolders (http://ip/app). I would also now like to host a domain, I've been able to setup the virtual hosts so that the domain loads properly in it's document root however the rest of my applications stop working and point to the same virtual host document root of the domain. How do I maintain my existing setup so all other requests behave the same?

  Read the article

• Load balancing with multiple gateways

  - by ttouch

  I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The reason I want to load balance between them is to achieve higher Internet speeds. Note: I have no advanced network hardware. Just my pc and the two routers that I have no access... main network: if: eth0 gw: 192.168.178.1 my ip: 192.168.178.95 speed: 400 kbit/s secondary network: if: wlan0 gw: 192.168.1.1 my ip: 192.168.1.95 speed: 300 kbit/s A diagram to explain the situation: http://i.imgur.com/NZdsv.jpg I'm on Arch Linux x64. I use netcfg to configure the interfaces Configs: # /etc/network.d/main CONNECTION='ethernet' DESCRIPTION='A basic static ethernet connection using iproute' INTERFACE='eth0' IP='static' ADDR='192.168.178.95' # /etc/network.d/second CONNECTION='wireless' DESCRIPTION='A simple WEP encrypted wireless connection' INTERFACE='wlan0' SECURITY='wep' ESSID='wifi_essid' KEY='the_password' IP="static" ADDR='192.168.1.95' And I use iptables to load balance, rules: #!/bin/bash /usr/sbin/ip route flush table ISP1 2>/dev/null /usr/sbin/ip rule del fwmark 101 table ISP1 2>/dev/null /usr/sbin/ip route add table ISP1 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.95 metric 202 /usr/sbin/ip route add table ISP1 default via 192.168.178.1 dev eth0 /usr/sbin/ip rule add fwmark 101 table ISP1 /usr/sbin/ip route flush table ISP2 2>/dev/null /usr/sbin/ip rule del fwmark 102 table ISP2 2>/dev/null /usr/sbin/ip route add table ISP2 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.95 metric 202 /usr/sbin/ip route add table ISP2 default via 192.168.1.1 dev wlan0 /usr/sbin/ip rule add fwmark 102 table ISP2 /usr/sbin/iptables -t mangle -F /usr/sbin/iptables -t mangle -X /usr/sbin/iptables -t mangle -N MARK-gw1 /usr/sbin/iptables -t mangle -A MARK-gw1 -m comment --comment 'send via 192.168.178.1' -j MARK --set-mark 101 /usr/sbin/iptables -t mangle -A MARK-gw1 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw1 -j RETURN /usr/sbin/iptables -t mangle -N MARK-gw2 /usr/sbin/iptables -t mangle -A MARK-gw2 -m comment --comment 'send via 192.168.1.1' -j MARK --set-mark 102 /usr/sbin/iptables -t mangle -A MARK-gw2 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw2 -j RETURN /usr/sbin/iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment "this stream is already marked; escape early" -m mark ! --mark 0 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i eth0 -m conntrack --ctstate NEW -j MARK-gw1 /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i wlan0 -m conntrack --ctstate NEW -j MARK-gw2 /usr/sbin/iptables -t mangle -N DEF_POL /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p tcp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p udp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -j DEF_POL /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound eth0' -o eth0 -s 192.168.0.0/16 -m mark --mark 101 -j SNAT --to-source 192.168.178.95 /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound wlan0' -o wlan0 -s 192.168.0.0/16 -m mark --mark 102 -j SNAT --to-source 192.168.1.95 /usr/sbin/ip route flush cache (this script was made by fukawi2, I don't know how to use iptables) but I have no Internet connection... output of iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 1254K packets, 1519M bytes) pkts bytes target prot opt in out source destination 1278K 1535M CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK restore 21532 15M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 /* this stream is already marked; escape early */ mark match ! 0x0 582 72579 MARK-gw1 all -- eth0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 2376 696K MARK-gw2 all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 1257K 1520M DEF_POL all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 1276K packets, 1535M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain DEF_POL (1 references) pkts bytes target prot opt in out source destination 1236K 1517M CONNMARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 15163 2041K CONNMARK udp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 555 33176 MARK-gw1 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 555 33176 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 277 16516 MARK-gw2 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 277 16516 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 1442 384K MARK-gw1 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 1442 384K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 720 189K MARK-gw2 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 720 189K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 Chain MARK-gw1 (3 references) pkts bytes target prot opt in out source destination 2579 490K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.178.1 */ MARK set 0x65 2579 490K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 2579 490K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MARK-gw2 (3 references) pkts bytes target prot opt in out source destination 3373 901K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.1.1 */ MARK set 0x66 3373 901K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 3373 901K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• Mono through FastCGI on nginx

  - by Stijn

  I'm going through http://www.mono-project.com/FastCGI_Nginx and can't get it to work. The FastCGI server seems to be running. The following is from the error log: upstream sent unexpected FastCGI record: 3 while reading response header from upstream, client: 192.168.1.125, server: arch, request: "GET /Default.aspx HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "arch" Command used to start the server (I've tried server2 and server4, using a simple .NET 2.0 or .NET 4.0 project): fastcgi-mono-server2 /applications=arch:/:/var/www/test/public/ /socket=tcp:127.0.0.1:9000 /stopable=True nginx config: server { listen 80; server_name arch; access_log /var/www/test/log/access.log; error_log /var/www/test/log/error.log; location / { root /var/www/test/public; index index.html index.htm default.aspx Default.aspx; fastcgi_index Default.aspx; fastcgi_pass 127.0.0.1:9000; fastcgi_param PATH_INFO ""; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } Using xsp4 works fine, I can browse the site. I've enabled FastCGI logging, this is the output: [2012-04-15 23:51:18Z] Debug Accepting an incoming connection. [2012-04-15 23:51:18Z] Notice Beginning to receive records on connection. [2012-04-15 23:51:18Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-04-15 23:51:18Z] Debug Record received. (Type: Params, ID: 1, Length: 386) [2012-04-15 23:51:18Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-04-15 23:51:18Z] Debug Read parameter. (PATH_INFO = ) [2012-04-15 23:51:18Z] Debug Read parameter. (SCRIPT_FILENAME = /var/www/test/public/Home) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_HOST = arch) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-gb,en;q=0.5) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip, deflate) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_COOKIE = ASP.NET_SessionId=2C3D702C9B0F23F69B80820B) [2012-04-15 23:51:18Z] Error Failed to process connection. Reason: Argument cannot be null. Parameter name: s [2012-04-15 23:51:18Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) [2012-04-15 23:51:18Z] Debug The FastCGI connection has been closed.

  Read the article

• How to connect SAN from CentOS through two iSCSI Targets

  - by garconcn

  I had asked the similar question before. This time I want to use subnet for two iSCSI Targets, hence I start a new question. I have an old Promise VTrak M500i SAN Server. It comes with 2 iSCSI ports. I want to connect to two LUNs on the SAN server through two separate Targets from CentOS 5.7 64bits server. My network setup is as follows: CentOS server: Management network - 192.168.1.1 Storage network 1 - 192.168.5.2 Storage network 2 - 192.168.6.2 Promise SAN server: Management network - 192.168.1.2 iSCSI Port 1 - 192.168.5.1 iSCSI Port 2 - 192.168.6.1 I have two Logical Drives on this SAN and they are mapped as follows: Index Initiator Name LUN Mapping 0 iqn.2011-11:backup (LD0,0) 1 iqn.2011-11:template (LD1,1) Basically, I want the traffic to iqn.2011-11:backup LUN 0 through 192.168.5.1 network the traffic to iqn.2011-11:template LUN 1 through 192.168.6.1 network I don't use MPIO, just want to separate the traffic to avoid traffic jam. How do I achieve this? I am new to SAN stuff, please explain as much detail as you can. Thank you. The following are what I am doing now. After mapping the LUN to my pre-defined Initiators, the CentOS server can discover both Targets. [root@centos ~]# iscsiadm -m discovery -t sendtargets -p 192.168.5.1 192.168.5.1:3260,1 iscsi-1 192.168.6.1:3260,2 iscsi-1 [root@centos ~]# iscsiadm -m discovery -t sendtargets -p 192.168.6.1 192.168.6.1:3260,2 iscsi-1 192.168.5.1:3260,1 iscsi-1 [root@centos ~]# /etc/init.d/iscsi start iscsid is stopped Starting iSCSI daemon: [ OK ] [ OK ] Setting up iSCSI targets: Logging in to [iface: default, target: iscsi-1, portal: 192.168.6.1,3260] Logging in to [iface: default, target: iscsi-1, portal: 192.168.5.1,3260] Login to [iface: default, target: iscsi-1, portal: 192.168.6.1,3260] successful. Login to [iface: default, target: iscsi-1, portal: 192.168.5.1,3260] successful. [ OK ] [root@centos ~]# iscsiadm -m session tcp: [1] 192.168.6.1:3260,2 iscsi-1 tcp: [2] 192.168.5.1:3260,1 iscsi-1 When I check the LUN mapping on the SAN server for the two Logical Drives, both LUNs are connected through Port0-192.168.5.2 with the Initiator defined in CentOS. Assigned Initiator List: Initiator Name Alias IP Address LUN iqn.2011-11.centos centos.mydomain.com Port0-192.168.5.2 0 Initiator Name Alias IP Address LUN iqn.2011-11.centos centos.mydomain.com Port1-192.168.5.2 1 I assume the following is what I want: Initiator Name Alias IP Address LUN iqn.2011-11.backup centos.mydomain.com Port0-192.168.5.2 0 Initiator Name Alias IP Address LUN iqn.2011-11.template centos.mydomain.com Port0-192.168.6.2 1

  Read the article

• Connectivity issues with dual NIC machine in EC2

  - by Matt Sieker

  I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

  Read the article

• Microsoft Word 2007 Landscape Printing

  - by Greg Ogle

  When printing document in landscape mode using Microsoft Word 2007, it is print portrait and scaling (varies a little per printer). I made a new document with just text and the text is getting chopped even in print preview. It seems rather weird. Am I doing something wrong?

  Read the article

• Decoding PAM configuration files ...

  - by Jamie

  Could someone point me to some (recent) documentation that would help me with decoding PAM configuration file lines like this: auth [success=2 default=ignore] pam_unix.so nullok_secure auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass I'm trying to get my Ubuntu box (testing 10.04 Server Beta 2) to use Active Directory, and the last step is to get PAM on the unix box to work, but I'm wary about making changes (and locking myself out) without understanding how to merge what I'm reading here with what ubuntu has implemented.

  Read the article

• How can I get LibreOffice to 'number' footnotes in the order *, †, ‡, § etc.?

  - by einpoklum

  With LaTeX, I can do: \documentclass[10pt]{article} \usepackage[symbol*]{footmisc} \begin{document} One\footnote{f1} Two \footnote{f2} Three \footnote{f3} Four \footnote{f4} \end{document} And get *, †, ‡, § ... as consecutive footnote markers. MS-Word has this feature too - an alternative footnote numbering scheme. How can I achieve the same with LibreOffice? PS - Shouldn't the OpenOffice and LibreOffice tags be merged?

  Read the article

• ASPX throws "404 The resource cannot be found"

  - by Diegoeche

  I'm deploying a website under a virtual directory using IIS. For some strange reason, Default.html works, but Default.aspx throws a 404. I have tried these: There's another virtual directory that contains an older version of the application and that one just works. I checked the properties of each virtual directory and they looked the same. I checked that the root didn't had any extra backslashes

  Read the article

• Modify styles in OneNote 2010 beta

  - by jay

  I'm running the OneNote 2010 beta and wondering if there is a way to edit the default styles? If you change the default font, the styles wont be changed. Is there any template, registry key or file that allows for the styles to modified?

  Read the article

• Launch a program when another program opens

  - by metasequoia

  I would like a method for starting a program when another program starts. Specifically, I’d like a to open a MS Word document and have my citation manager open simultaneously (EndNote supports this function within MS Word preferences, but I recently switched citation managers). The batch scripts I’ve seen so far, including this one, don’t fit the bill. I’d like to be able to open any existing Word document on my drive and trigger the second program.

  Read the article

• TAB completion not working in ubuntu hardy heron

  - by Tutul

  I have recently installed ubuntu hardy and found that shell command completion with TAB doesn't work, the package 'bash-completion' is installed in my system. I guess it is related to dash being the default shell? Is there a way to use tab completion in dash? If there isn't a way then how can i change my default shell to bash?

  Read the article

• radvd is not assigning prefix

  - by Samik

  I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. I've obtained the ULA prefix from here. Contents of /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 net.ipv6.conf.all.forwarding = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 Contents of /etc/radvd.conf # NOTE: there is no such thing as a working "by-default" configuration file. # At least the prefix needs to be specified. Please consult the radvd.conf(5) # man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help. # # interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 10; AdvDefaultPreference low; AdvHomeAgentFlag off; prefix fd8a:8d9d:808f:1::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr on; }; }; Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes I've also enabled radvd at startup through chkconfig. Though I noticed that radvd is starting after interfaces are brought up. I've tried restarting the network service afterwards but still I get the following link-local address only #ip -6 addr show 1: lo: mtu 16436 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qlen 1000 inet6 fe80::5054:ff:fe74:d746/64 scope link valid_lft forever preferred_lft forever Edit: Based on the answer given by Sander Steffann I still need clarification on some points but I'm posting here what worked. Contents of /etc/sysconfig/network NETWORKING=yes HOSTNAME=syslog-ng-server NETWORKING_IPV6=yes IPV6FORWARDING=yes Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes IPV6FORWARDING=no Removed following line from /etc/sysctl.conf net.ipv6.conf.all.forwarding = 1 Contents of /etc/radvd.conf is as previous.

  Read the article

• why did preview stop working from firefox?

  - by kloop

  I just installed adobe reader, and now when I click on a PDF in the browser, it is not opened in preview. Adobe doesn't work either, and I am stuck without having the PDF viewed at all. I right clicked on a PDF, and preview is still my default viewer. So this: http://www.ehow.com/how_6764524_make-preview-default-pdf-viewer.html is not helping. Any ideas? I want to be able to use Preview in Firefox.

  Read the article

• How to set per user mail quota for postfix using policyd v2?

  - by ACHAL

  I have configured cluebringer 2.0.7 mysql httpd and all services are running well . But now i want to set per user mail quota for outgoing mails and want to restrict for a fix number of mail. I have tried to setup a quota for my host r10.4reseller.org but not working Quota List Policy:- Default Outbound Name:-Default Outbound Track:-Sender:user@domain Period:-60 verdict:-REJECT Data:- Disabled:- no Quota Limits Type:- MessageCount Counter Limit:- 1 Disabled:-no Do I need to do anymore settings for quota ?

  Read the article

• Share 3G connection over WiFi-LAN network

  - by kush.impetus

  This is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them. Laptop IP Address: 192.168.1.4 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 Desktop IP Address: 192.168.1.5 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 ASUS RT-N10+ Router IP Address: 192.168.1.4 Default Gateway: 192.168.1.2 I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router. Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points. Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC. What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to. Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify? Is that possible on the first hand? Please note that I am trying to implement the network without spending anything extra (for purchasing as USB WiFi adapter for PC, of course, which could have made the life lot easier for me). Thanks in advance

  Read the article

• hierarical numbering in microsoft word 2003

  - by cody

  I have a headline in my document of level 3 and want the document hierarical numbered but it seems my level 3 headings do restart numbering at 1.1.1 and i have no clue why. it looks like that: 1. blah 1.1 blub 1.2 blub 2. blah 2.1 blub 2.2 blub 1.1.1 blubb <- shouldnt this be 2.2.1 ? 3. blah how can I correct this issue?

  Read the article

• "macros have been disabled" message in Word 2007 but no macros

  - by Loftx

  Hi there, I open a .doc file in Word 2007 (sorry I am unable to supply the .doc) which pops up with a message above the document "Security warning: Macros have been disabled" but there are no macros shown in the macros listing and no functionality displayed in the VBScript editor. Why does Word think this document contains macros and how can I remove them to prevent the warning? Thanks, Tom

  Read the article

• Accessing guests on virtual network when connected to host via PPTP

  - by Viktor Elofsson

  I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

  Read the article

• What is the standard system architecture for MongoDB

  - by learner

  I know this question is too vague, so I would like to add some key numbers to give insights about what the scenario is Each Document size - 360KB Total Documents - 1.5 million Document created/day - 2k read intensive - YES Availability requirement - HIGH With these requirements in mind, here is what I believe should be the architecture, but not too sure, please share your experiences and point me to right directions 2 Linux Box(Ubuntu 11 would do)(on a different rack setup for availability) 64-bit Mongo Database 1-master(for read/wr1te) and 1-slave(read-only with replication ON) Sharding not needed at this point in time Thank you in advance

  Read the article

• Move to next selection in Word 2007

  - by Arthur Ward

  When I have multiple selections in a Word 2007 document, such as after selecting all instances of a style, how can I move from one selection to the next? When you issue the select all instances command, the view snaps to the next instance of the style, but how can I find the other instances? Any cursor key will unselect everything. Using the mouse to scroll through the document is not feasible for large documents, plus the selection could be a single character -- very easy to miss!

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >