Search Results

Search found 48513 results on 1941 pages for 'internet explorer 10'.

Page 244/1941 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • Passwortgeschützter Traffic-meter

    - by UncleBob
    Hallo erstmal, ich habe hier ein kleines Problem für das ich bis jetzt noch keine Lösung habe. Ich lebe in Bosnien und teile hier die Internetverbindung mit der Vermieterin, und wie es in Bosnien so ist haben wir keine Flatrate, sondern eine 15 Giga traffic limite. Das wäre eigentlich mehr als genug, wenn der Sohn der Vermieterin nicht immer überziehen würde, sodass die Rechnungen immer ziemlich teuer ausfallen. Ich habe ihm bereits ein Messprogramm installiert, aber das schaltet er offensichtlich aus sobald er in die Nähe seiner Limite kommt und behauptet dann die Limite nicht überzogen zu haben. Ich brauche also mindestens ein Messprogramm das Passwortgeschützt ist und/oder im Log Zeiten vermerkt wärend denen es nicht eingeschaltet war. Noch besser wäre ein Programm das ihm den Netzzugriff einfach abklemmt wenn er seinen Anteil überschreitet, also eine Mischung aus Trafic-meter und Parental Guard. Kann mir da jemand weiterhelfen? Gtranslated version Hi first, I have a small problem for which I yet have no solution. I live in Bosnia and share the Internet connection here with the owner, and how it is in Bosnia, we do not have a flat rate, but a 15 Giga traffic limite. That would actually would be more than enough, if the son of the landlady does not always cover so that the bills always turn out quite expensive. I have it already installed a monitoring program, but he apparently turns out as soon as he comes close to its limit and then claims not to have the limit excessive. I therefore need at least a measurement program that is password protected and / or in the log notes During low periods where it has not turned on. Even better would be a program that disconnects him from accessing the network if it simply exceeds its share, ie a mixture of Traffic parameters and Parental Guard. Can someone help me there?

    Read the article

  • Cannot connect to apache web server over internet

    - by user1658093
    I can access my apache 2.2 webserver from the lan ( at this case I use local IP aadress ) but I cannot connect externally ( from another network ). I changed apache to listen port 800, forwarded same port from router control panel, turned off windows and router firewalls. I use whatsmyip.com to get IP with what I try to connect. When I'm trying to connect I use : [whatsmyip.com IP]:800. Also, I can ping server IP externally. OS is windows7. Any ideas, suggestions? Thanks

    Read the article

  • LXC, Port forwarding and iptables

    - by Roberto Aloi
    I have a LXC container (10.0.3.2) running on a host. A service is running inside the container on port 7000. From the host (10.0.3.1, lxcbr0), I can reach the service: $ telnet 10.0.3.2 7000 Trying 10.0.3.2... Connected to 10.0.3.2. Escape character is '^]'. I'd love to make the service running inside the container accessible to the outer world. Therefore, I want to forward port 7002 on the host to port 7000 on the container: iptables -t nat -A PREROUTING -p tcp --dport 7002 -j DNAT --to 10.0.3.2:7000 Which results in (iptables -t nat -L): DNAT tcp -- anywhere anywhere tcp dpt:afs3-prserver to:10.0.3.2:7000 Still, I cannot access the service from the host using the forwarded port: $ telnet 10.0.3.1 7002 Trying 10.0.3.1... telnet: Unable to connect to remote host: Connection refused I feel like I'm missing something stupid here. What things should I check? What's a good strategy to debug these situations? For completeness, here is how iptables are set on the host: iptables -F iptables -F -t nat iptables -F -t mangle iptables -X iptables -P INPUT DROP iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t nat -A POSTROUTING -o lxcbr0 -j MASQUERADE iptables -t nat -A PREROUTING -p tcp --dport 7002 -j DNAT --to 10.0.3.2:7000

    Read the article

  • do I need to create an AD site for VPN network

    - by ykyri
    I have Windows Domain level 2008 R2. There are four GC DC in four different physical locations. I have Kerio-based VPN network for replication and remote administration. Here is how network configured: dc1: local IP: 192.168.0.10 VPN IP: 192.168.1.10 dc2: local IP: 10.10.8.11 VPN IP: 192.168.1.11 dc3: local IP: 10.10.9.12 VPN IP: 192.168.1.12 dc4: local IP: 10.10.10.13 VPN IP: 192.168.1.13 That's simple, replication and all works fine but when running dcdiag on dc3 I have an error: A warning event occurred. EventID: 0x000016AF During the past 4.12 hours there have been 216 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. <...> The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text 'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. Here is netlogon.log lines example: 05/30 12:07:39 DOMAIN.NAME: NO_CLIENT_SITE: dc2 192.168.1.11 05/31 09:52:11 DOMAIN.NAME: NO_CLIENT_SITE: dc4 192.168.1.13 05/31 19:49:31 DOMAIN.NAME: NO_CLIENT_SITE: adm-note 192.168.1.101 07/01 05:16:26 DOMAIN.NAME: NO_CLIENT_SITE: dc1 192.168.1.10 All VPN-joined computers are generates same log line as above. Computer amd-note is for example administrator's notebook, also have VPN. Question is should I add new AD site and bind VPN subnet 192.168.1.0/24 with that site?

    Read the article

  • Communicate from PC in internet to remote GSM device

    - by Jakub Jezik
    I have several remote devices that use GSM modem and gather data. I need to communicate with those devices from a PC station located in a office using the dial up connection. Is there a way to do this WITHOUT an additional GSM modem connected to that PC? Is there some way to accomplish PC to remote GSM device communication using e.g. VoIP or similar technology? I want to avoid installing an additional GSM modem in the office and use some software solution instead.

    Read the article

  • Mobile Internet Problem

    - by alskndalsnd
    I am using mobile dial up on ubuntu. However, SOMETIMES even though I am connected to the ISP, I do not have any entries in /etc/resolv.conf. I often restart network-manager or networking hoping it will change but normally it doesn't do any good. and by connected I mean I can see that the network notification icon has switched to a few bars indicating connectivity). Anyone know a good solution around this?

    Read the article

  • Netgear CG3000D new Modem/Router - Random High Ping

    - by justin.chmura
    Cox just recently came out and looked at my internet and decided that the modem I had was causing high latency issue. The speed was fine but the ping would spike to around 100 and over when gaming or putting a load more than browsing on the line. After they replaced it, it seems like I get better latency, but when it spikes, I get upwards of over 300 ping with like 500 jitter. I figured I would hit the serverfault universe before sending another email to Cox. I opted not to do the Cox setup as it was an extra $20 which I thought would have just setup the wireless (which I can handle). Is it a setting or something that I missed that needs to be setup? The firmware for the CG3000D is awful and not fun to use. I did change some hidden settings on the RgServices.asp page (I'll attach a screenshot). I've also heard that the Router/Modem combos are awful and that I should go back and just ask for a modem stand-alone. Any input is helpful. All screenshots: http://imgur.com/a/JX6qu#0

    Read the article

  • Slow upload, fast download on Windows 7 64bit system

    - by Malik
    I've got a weird problem in the download speeds on my desktop PC (Windows 7 Home Premium 64bit) are consistently fast (approx. 400kB/s) but uploads are very slow (around 6-10kB/s). This has been going on for the last 3 weeks or so. I am a very competent user and troubleshooter, and have searched online for 2 weeks for a solution, to no avail. Part of the problem is that internet is provided by WiFi by my landlord and I have no access to the router (BT Home Hub router) although I know for sure he wouldn't have the first idea on how to restrict my usage :) (rules that out) Anyway, I've tried: - various drivers (my Wifi 'card' is TP-link TL-WN851N, and I've tried TP-link + Atheros + Qualcomm Atheross drivers, suggested by Microsoft) - various tweaks to network parameters (e.g. as suggested by SpeedOptimser) - various tweaks to Windows 7 services (e.g. disabling/manual-ing unecessary services) - raising and lowering head onto a reasonably firm surface at moderate frequency (jk :D) None of the above have helped, and I'm officialy asking for help now!! Thanks for your time and effort in advance!

    Read the article

  • Routing and authenticating all access through squid

    - by Knight Samar
    Hi, I want to route all Internet access in my network through a Squid proxy server and authenticate and log all users. I want this to be a client-independent setting so that no one needs to do anything on their browsers or machines. I have set my network gateway as the proxy server so that all traffic will be sent to it. I have done this using options in DHCP server. Now I tried using squid as a transparent proxy, but then it won't authenticate in that mode. I tried using iptables to route all traffic to port 3128 but it won't popup the authentication dialog box from SQUID. I tried telling DHCP to give WPAD to all clients by placing a WPAD file on a webserver containing the following for automatic proxy configuration on clients: Changes in dhcpd.conf option wpad code 252 =test; option wpad "\n\000"; option wpad "http://192.168.1.5/wpad.dat\n"; The WPAD file: function FindProxyForURL(url,host) { return "PROXY squid-server-ip-address:3128 ; DIRECT "; } But the browsers (different versions of Firefox and IE) seem to ignore it. :( What should I do ?

    Read the article

  • How to direct outgoing traffic through specific interface?

    - by user1434058
    I added eth1 and eth2 to my Ubuntu Server, all 3 use DHCP and are on the same lan eth0 10.0.0.41 eth1 10.0.0.42 eth3 10.0.0.43 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default router.net 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth1 10.0.0.0 * 255.255.255.0 U 0 0 0 eth2 curl --interface eth1 www.google.com doesn't work what else do i need to do for the above to work?

    Read the article

  • Have two exchange servers to communicate together

    - by Data-Base
    We have Exchange Server 2007 using our domain ddd.com. We created an isolated network with a firewall/gateway and installed a DC and Exchange Server 2010 using a demo/test domain (ddd.loc). We opened all the needed ports in the firewall (10.10.2.88) to the Exchange Server 2010. In our main Domain Controller (10.10.2.3) we defined the domain ddd.loc with IP 10.10.2.88 (firewalls). We also we defined MX records to the same IP (10.10.2.88) We did that so when we send email from my email [email protected] it will go to the Exchange Server 2010. Anyways, all the pings test from to any servers are OK. But we are not able to send or receive emails. Between these Exchange Servers we can not send any email from the 2010 to any email in general (emails are pending). Also, in Exchange 2007 we are getting error #550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ##

    Read the article

  • Windows Console .exe won't run if it's downloaded from the internet

    - by Jason Kester
    I have a nightly job on Windows Server 2003 that automatically updates itself by downloading its .exe from Amazon S3. I've noticed that when it performs the download and tries to run the newly downloaded .exe, it is immediately kicked back to the command line without actually running anything. I can verify this by sticking the new version of the code directly on the server and watching it execute successfully, then uploading it to the "update" server, running the bootstrapper then running the .exe and observing it fail to execute. I can only assume that this is due to Windows protecting me from running code from outside its trusted zone. How does a fella go about configuring it to allow code from this particular external location to execute? Thanks!

    Read the article

  • Remote network traffic not passing through VPN

    - by John Virgolino
    We have the following topology: LAN A LAN B LAN C 10.14.0.0/16 <-VPN-> 10.18.0.0/16 --- SONICWALL <-VPN-> M0N0WALL --- 10.32.0.0/16 Traffic between LAN A and LAN B works perfectly. Traffic between LAN C and LAN B works perfectly. Traffic between LAN A and LAN C, not so much. LAN A's gateway has a route to LAN C that points to the Sonicwall. The Sonicwall has a route to LAN A pointing to the VPN gateway connecting LAN B to LAN A. Tracing packets on the Sonicwall shows the LAN C destined traffic to arrive on the Sonicwall, but it does not forward the traffic, it dies there. Traffic from LAN B gets forwarded. Tracing packets on the Sonicwall while sending traffic from LAN C destined for LAN A shows nothing. This tells me that the M0N0WALL is not forwarding traffic for the 10.14.0.0 network and the Sonicwall is not forwarding from 10.14.0.0. The SA on the Sonicwall terminates on the WAN ZONE and is defined to use an address group that incorporates both the 10.14.0.0 and 10.18.0.0 networks. The M0N0WALL is configured for the 10.18.0.0 network and I have tried with both a static route to 10.14.0.0 and without on the M0N0WALL. I tried manually adding the 10.14.0.0 network to the SA on the M0N0WALL, but that really aggravated it and the SA never came up, so I reverted. I have checked all the firewall rules to make sure nothing is blocked. All of the Sonicwall auto-added rules look right. Specs: Sonicwall TZ200, Enhanced OS M0N0WALL v1.32 I'm at a loss at this point. Any help would be appreciated.

    Read the article

  • VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

    - by Patrick
    Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

    Read the article

  • How to configure Microsoft Internet Information Server for use with the tomcat container

    - by Debabratta
    I have an webapplication written mainly in jsp and servlet and I use tomact7.0.26 as my application server. I want this application to run by IIS though I can run it using tomcat. I searched in the web that I have to map the index.jsp to the IIS script directory. So I want that when jsp request comes to IIS server, it forwards it to tomcat server. So please tell me the steps for required configuaration. Thankyou.

    Read the article

  • Combine two or more compressed files

    - by shantanuo
    I have 2 gz files those I need to merge into one. time join <(zcat r_TR2_2012-05-28-08-10-00.gz) <(zcat r_TR1_2012-05-28-08-10-00.gz) The above statement is not working as expected. I am using 3 commands to do the needful. gunzip r_TR2_2012-05-28-08-10-00.gz gunzip r_TR1_2012-05-28-08-10-00.gz tar -zcvf combined.tar.gz r_TR1_2012-05-28-08-10-00 r_TR2_2012-05-28-08-10-00 Is there any way to do it in 1 statement?

    Read the article

  • Centos VM serving multiple public IP: how to configure network interface?

    - by Glasnhost
    I have a Centos 5.6 VM (Vsphere client) already responding to two different public IPs on eth0 and eth0:1 and I'm trying to add eth0:2. I copied the eth0 config file and restarted the network service. I don't understand which other steps are needed... ifconfig eth0 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.10 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163371837 errors:77 dropped:0 overruns:0 frame:0 TX packets:168210961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1891221045 (1.7 GiB) TX bytes:855899500 (816.2 MiB) Interrupt:59 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.11 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.12 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:188976973 errors:0 dropped:0 overruns:0 frame:0 TX packets:188976973 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2015642664 (1.8 GiB) TX bytes:2015642664 (1.8 GiB) more /etc/resolv.conf nameserver 10.1.12.1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.1.12.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Internet compression proxy for low speed broadband?

    - by user23150
    I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

    Read the article

  • Load-balanced Linux server across internet?

    - by LinuxGnut
    I'm investigating setting up a load balanced server solution consisting of three CentOS 5.4 boxes. Two of these boxes will reside in one facility, while a third will reside in a different facility. I'm currently working to set up heartbeat, ldirectord, ipvsadm to load-balance the machines, but I'm not sure its going to work with I'm not overly familiar with the details behind how all of these work, but is the load balancing going to work correctly when these servers are not all on the same LAN? I'm not sure if heartbeat is using SNMP to send signals or not, which would only work over a LAN. Has anyone tried this or found a different solution?

    Read the article

  • SBS 2008 - DNS Forwarders timing out.

    - by Moif Murphy
    Hello, We have an SBS 2008 server that keeps losing connection to the internet approx 2-3 times a day. It's a simple setup, BT Business Broadband ADSL to a Wireless Zyxel router to the server. Clients connect via WiFi from their laptops. Plugging ethernet in makes no difference, only a reboot of the router seems to bring everything back again. I'm looking at the forwarders on the DNS properties page and they're timing out when trying to resolve the IPs. Currently there are two IPs in there, 194.72.9.34 which has timed out and 194.72.9.38 which has finally resolved to ns8.bt.net We've been in there and replaced all media, installed a PCI NIC, have changed the router three times. There are no errors in the DNS event logs pertaining to what's going on. We've also been on to BT who are adamant that it's not their end. Could someone shed some light on what could be going on or where else to look in the configuration of the server? Thank you.

    Read the article

  • Vmware Player network adapters have no network or internet access in Windows 7 enterprise

    - by daffers
    As per the title. My VMWare player installation has setup the two network adaptor VMnet1 and VMnet8 and they are picked up as unidentified networks with no network access (i need this to activate my windows server installation on it). The option to change the network location is not available (this might be because of network policy on the domain despite having set this as configurable in the local security policy section). Is there anyway i can change how these networks are detected or alter the configuration of vmware to get around this?

    Read the article

  • PHPMyAdmin running very slow over internet but fine locally

    - by columbo
    I connect to PHPMyAdmin remotely on a Centos server using my local PC via Firefox. Usually it's fine but today it's really slow (2 minutes to load a page), sometimes timing out. Other connections to the server are fine. The SSH command line is as fast as ever as is the GNOME dekstop over SSH. In fact on the GNOME desktop I can run PHPMyAdmin locally from its browser and it's as quick as ever (which is a solution to the problem of course). I've checked the various log files and seen nothing unusual, I've logged into the MySQL command line and the database is running fine without any slowing what so ever. So it just seems to be slow when I access PHPMyAdmin on the server from the browser on my remote PC (I've tried IE and Firefox, both are slow). Has anyone experienced this or have any ideas what the issue could be. Connecting via CLI through tunnel works OK - problem is in phpMyAdmin for sure. Cheers

    Read the article

  • Securing internal data accessed by a website on the big, bad internet

    - by aehiilrs
    A close relative of this question on Stack Overflow: When you have a web site in your DMZ that needs to access production data stored on an internal DB, what strategies do you recommend using to lower the risks that come from accessing live data? Is it even considered acceptable to have a connection initiated from the DMZ come inside of your network? An extra detail about the nature of the site that kind of throws a monkey wrench into the machinery is that people using the web site will be competing for "spots" on a first-come, first-serve basis with others using the internal software. Because of this, as close to zero lag time between the two applications as possible is ideal.

    Read the article

  • How to setup an Openvpn server with two gateways to internet

    - by fourat
    I have an openvpn server behind two wan interfaces: eth1 and eth2 where eth1 is the default gw and eth2 is where openvpn binds to. The problems my ovpn server is replying back to ovpn client via the default gw (through eth1) and the tcp negociation is lost before establishing any tunnel. Here's what's happening: wan client -----> eth2 ----> openvpn -----> eth1 ----> lost and not delivered back to client Is there a way to tell ovpn to stick on eth2 and consider it for all traffic ?

    Read the article

  • Installing WiFi in a church for internet access

    - by Dave Griffiths
    Hi, a colleague at work asked this question: My local church want to get WiFi enabled in the whole of their offices and main church building. The offices and main building are in the same overall structure and so the signal does not need to travel outside to any other buildings outside this main structure. Where would I start on such a project and what kind of repeaters are needed (and how are they set up) given that some of the walls are pretty thick. Do you still have one ADSL line coming in to router or are there some options of having two lines coming in so that they isn't a single point of failure. Am looking at fibre for the broadband for increased speed. Any starting pointers appreciated.

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >