Search Results

Search found 8103 results on 325 pages for 'matt trouble esse'.

Page 244/325 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • Set up Linux box as WAP for MyBookLive?

    - by AcidFlask
    I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

    Read the article

  • vim does not preserve symlink over sshfs

    - by HighCommander4
    I'm having some trouble with symlinks and sshfs. I use the '-o follow_symlinks' option to follow symlinks on the server side, but whenever I edit a symlinked file on the client side with vim, a copy of it is made on the server side, i.e. it's no longer a symlink. Set up a symlink on the server side: me@machine1:~$ echo foo > test.txt me@machine1:~$ mkdir test me@machine1:~$ cd test me@machine1:~/test$ ln -s ../test.txt test.txt me@machine1:~/test$ ls -al test.txt lrwxrwxrwx 1 me me 11 Jan 5 21:13 test.txt -> ../test.txt me@machine1:~/test$ cat test.txt foo me@machine1:~/test$ cat ../test.txt foo So far so good. Now: me@machine2:~$ mkdir test me@machine2:~$ sshfs me@machine1:test test -o follow_symlinks me@machine2:~$ cd test me@machine2:~/test$ vim test.txt [in vim, add a new line "bar" to the file] me@machine2:~/test$ cat test.txt foo bar Now observe what this does to the file on the server side: me@machine1:~/test$ ls -al test.txt -rw-r--r-- 1 me me 19 Jan 5 21:24 test.txt me@machine1:~/test$ cat test.txt foo bar me@machine1:~/test$ cat ../test.txt foo As you can see, it made a copy and only edited the copy. How can I get it to work so it actually follows the symlink when editing the file?

    Read the article

  • Strange sound behavior

    - by caarlos0
    First of all, sorry for the tittle. English isn't my native language, and I can't find a word to describe the strange behavior I'm getting here. In the most simple explanation, is like sound keeps going down and up again... Think in a kid with that old radios that have a circled volume button. Think like these kid keeps "turning" the volume button. That is the behavior I'm getting here. At first, I believed that it was a pulseaudio issue, but, it isn't. I followed the wiki part I think that should be my problem, but it didn't work. After that, as I'm using XFCE, I didn't really need pulseaudio, so I removed it and stays with a clean alsa, hopping that will fix my problem. Sweet mistake. It really looks like a kid looking for trouble. I believed it worked, and, suddenly, here is the same issue again. BTW: I have a full-upgraded testing system (yeah, I upgraded to testing hopping for new pulseaudio version which fix the issue), no pulseaudio at all, just xfce, started with startxfce. What can I do to fix this? It's extremely annoying... sometimes I just want to throw my laptop in the wall because of this. Any extra info you need, please, tell me. Thanks in advance -- EDIT: My alsamixer is like this: And here is a video with the sound behavior.

    Read the article

  • How to disable monitor "sleep" on Ubuntu without access to X?

    - by exhuma
    I just received a CuBox (basically a tiny ARM based PC). It comes pre-installed with Ubuntu, and I did not (yet) want to fiddle with the OS itself. My aim is to have it automaticall start a browser in fullscrren upon boot. Using chromium with the "--kiosk" flag works perfectly in that regard. But now I have the problem that the screen turns off after a certain time. I managed to turn off the screen saver using: gconftool-2 -s /apps/gnome-screensaver/idle_activation_enabled --type=bool false And tried to turn off the power management using: gconftool-2 -s /apps/gnome-power-manager/ac_sleep_display --type=int 0 and gconftool-2 -s /apps/gnome-power-manager/timeout/sleep_display_ac --type=int 0 Neither of the power-management commands worked. Theoretically I could hook up a mouse and keyboard and configure it manually. But I want to learn how to do it over the console. The box will eventually be only reachable via SSH. So I'd like to be able to trouble-shoot it later. I don't quite know where to look for. I searched the gconf tree using gconftool-2 -S for anything related to the terms power, idle and sleep but did not find anything promising. Maybe it's not even gconf related... Any ideas what else I could look for?

    Read the article

  • Sharing between Vista and Windows 7

    - by Metro Smurf
    Vista Ultimate 32 bit Windows 7 Ultimate 64 bit I've read through similar questions about sharing between Win7 and Vista, but none of them have resolved my issue of not being able to share between Win7 and Vista: Connecting to a Vista shared folder from Windows 7 Networking Windows 7 and Vista Enable File sharing in Windows Vista Previously I had previously had my Vista and XP system sharing back and forth without any problems. I was able to access the shares without entering a user name / password in the NT challenge prompt (note: account names and passwords were different on the Vista and XP systems). Currently I replaced my XP system with a Win7 system. Now, when I attempt to access shares to/from Vista / Win7, I am continually prompted with an NT challenge to enter my credentials. Things I've Verified/Tried Both systems are on the same workgroup. Win 7 is using the Home network. Vista is using the Private network. In other words, neither system is using a Public network profile. Enabled file sharing with and without password protection on both Vista and Win7 Tried HomeGroup Connections (win7) with Windows to manage connections and Use user accounts to connect. Reviewed too many online articles to count to trouble shoot. Set the shares to have full control by everyone. Set up the shares directly on the directory and through the share manager. My Question How can I enable file sharing between Vista and Win7 without being prompted with a username/password challenge, ever?

    Read the article

  • Why is it a bad idea to use a customer email as the from address

    - by Crab Bucket
    I've got an application that emails users once they have filled in a form. It uses a [email protected] as a from address. The customer wants it to use the email from the form as the from address which could be anything. I have been told that this is a bad idea due to spoofing/blacklisting and spam. I feel really vague about the exact reason about why this is a bad idea particularly as i've got to try to counsel the client out of this. Can someone explain to me why this is a bad idea. Interestingly the client has used a gmail account as the from address as a demo which not only works fine but has enabled the application to start sending emails (it wouldn't do it before with an email which was [email protected]). Erm - what is going on. I'm told one thing and the opposite works. Sorry - i know this is basic but I could find anything on a google search. Largely I think because I'm having trouble even framing the question. EDIT Thank you everyone - great answers. Interestingly the server sending the email and the mail box that it is going to are both behind the same firewall so the client says they are unconcerned about spam. Oh well.

    Read the article

  • Routing for remote gateway over VPN in Vista/7 broken?

    - by Raymond
    Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

    Read the article

  • Vim: How to Install Airline?

    - by MunkyCheez
    I'm just getting started with Vim. It's a fun experience, but I've found it to be kind of overwhelming. I'm trying to get this plugin installed, vim-airline, but I'm having a lot of trouble. The Installation section on the Github page simply states: copy all of the files into your ~/.vim directory Presumably, this means download the .zip, extract it, and copy all of those files into ~/.vim/. I did this, but Vim just starts up like normal, and running :help airline just gives: Sorry, no help for airline I assume that this means it isn't getting installed. Also, the statusbar remains the same. I'm new to Vim and would really like to get this working. Thanks in advance! EDIT: I also tried putting the files into /usr/share/vim/vim73/. No dice. EDIT 2: I ran :helptags ~/.vim/doc and now the help-page displays when I type :help airline, but I'm still not getting the plugin itself (the status bar). Vim looks the same, but it can now display the help page.

    Read the article

  • Windows 7 Paging file apparently not being used

    - by Daniel F.
    I'm running Windows 7 Home Premium 32bit on a mobo with 24GB RAM. Of those 24GB, 20GB are assigned as a RAMDISK via ASRock XFastRAM. This RAMDISK has the drive letter X assigned to it. On X:\ I'm storing the temporary files folder, as well as pagefile.sys. Pagefile.sys has 6GB of size. The X:\ has usually around 14GB free space, so the temporary files are negligible, it's mostly the browsers which are storing their caches on there. Now my issue is that Firefox is crashing a lot on me, no error message pops up, but I know that this is because it's out of memory. I could kind of live with that, but now that I switched from using Eclipse to Android Studio, I know that I'm in trouble, because Java isn't capable of allocating, and Android Studio, together with the Java instances it launches, is quite a memory hog. So I tried to figure out what's wrong, and apparently Windows isn't swapping out memory onto the paging file. While my applications are crashing (firefox) / not starting (java vm's), the paging file is only using constantly around 15% of its size (checked with the performance monitor). 15% equals to 1GB aprox. I know that the correct solution would be to switch to 64 bit Windows, but I had to use the 32 bit version because of driver issues which I had about two years ago, and I guess that I'll have them again if I reformat and install the 64 bit version. Also, the machine is running quite stable, the only issue is the memory, so I'd like to use it as it is (as the apps are installed and configured) Is there a way to make Windows use the paging file more efficiently? None of my processes require more than 1GB, I'd just like it to swap out some seldomly used stuff, like GoogleCrashHandler.exe and stuff like that in order to have "more physical memory avaliable". Is that possible?

    Read the article

  • Weird glitches on Intel iGPU

    - by FrederikVds
    I have a weird problem that I can't manage to describe in one word, so I'm having trouble searching for a solution. My monitors sometimes go black for a tenth of a second. Other times, they show the image shifted a few centimeters to the left or to the right. This happens on both of my monitors, but not necessarily at the same time. I would say it happens about once a minute, unless under heavy load, in which case it can happen every second or so. Interestingly, heavy CPU/memory usage can also cause this, not just heavy GPU usage. This only happens when they are both at 1920x1080, not when one of them, or both, are at a lower resolution. It also happens when they are in mirrored mode instead of extended desktop mode. My GPU is obviously not at full clock speed most of the time: this happens at 350 MHz as well as at 1200 MHz. So it doesn't seem like a matter of too little performance. I'm not seeing any traditional artefacts, even when I use MSI Kombustor, only this kind of full-screen glitches. CPU stressing software isn't reporting any issues either. I'm thinking maybe the connection between my CPU and my PCH isn't fast enough, but I can't find anyone with the same problem to confirm that. I'd rather not invest in a discrete GPU without being certain it will fix something. Does anyone know how to search for this, or even better, does anyone have a solution? My full specs are below. Thanks in advance! Specs: ASUS P8Z77-M Intel Core i5-3570K (with Intel HD 4000 Graphics) 2x4 GB AMD Performance Edition memory Corsair Force 3 Series Rev. B 120GB SSD Maxtor 200GB HD Lite-On DVD-RW Antec 350 Watt PSU 64-bit Windows 7 Professional 2x Iiyama ProLite E2208HDS display

    Read the article

  • daily rsync backups with hard links, checksums, and a new computer

    - by user75058
    I backup my laptop to a Fedora desktop daily using rsync with hard links. This has worked great for almost a year. I recently purchased a new computer, transferred over my data, and would like to continue backing up this computer daily. However, due to the data transfer from the old laptop to the new laptop, the timestamps have obviously changed, and will thus cause my daily rsync backup to re-transfer all of the data. I thought that by adding the -c (checksum) switch to my rsync backup it would match files based on checksum, instead of timestamp and size, and only transfer those files that are different or not present. This appeared to work, but upon examining the new backup, hard links are not being created, and it appears the files that should be hard linked are simply being copied to the new backup directory from the previous backup directory on the backup server. This is very peculiar behavior to me, and I am having trouble figuring out why this is occurring. Checksums match for files that I think should be hard linked. I have looked through the rsync man page and Google'd around a bit and have been unable to find anything for me to better understand this behavior.

    Read the article

  • Assign individual NIC to KVM guest

    - by Bin S
    I have a server with 6 NICs installed and is running Ubuntu 12.04LTS. I want to setup 4 guest VMs using kvm. Now I want to assign 2 NICs for the host(1 Public IP and 1 private IP), and 1 NIC each to 4 guest VM(all private IP). How do I do this? /etc/network/interfaces I am having trouble with my configuration file shown below: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.109 netmask 255.255.255.0 gateway 192.168.1.5 auto eth1 iface eth1 inet static address 192.168.1.117 netmask 255.255.255.0 auto eth2 iface eth2 inet manual auto br0 iface br0 inet static address 192.168.1.118 netmask 255.255.255.0 bridge_ports eth2 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth3 iface eth3 inet manual auto br1 iface br1 inet static address 192.168.1.119 netmask 255.255.255.0 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth4 iface eth4 inet manual auto br2 iface br2 inet static address 192.168.1.123 netmask 255.255.255.0 bridge_ports eth4 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto eth5 iface eth5 inet manual auto br3 iface br3 inet static address 192.168.1.124 netmask 255.255.255.0 bridge_ports eth5 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off

    Read the article

  • Fortigate restrict traffic through one external IP

    - by Tom O'Connor
    I've got a fortigate 400A at a client's site. They've got a /26 from British Telecom, and we're using 4 of those IPs as a NAT Pool. Is there a way to say that traffic from 172.18.4.40-45 can only ever come out of (and hence go back into) x.x.x.140 as the external IP? We're having some problems with SIP which looks like it's coming out of one, and trying to go back into another. I tried enabling asymmetric routing, didn't work. I tried setting a VIP, but even when I did that, it didn't appear to do anything. Any ideas? I can probably post some firewall snippets if need be.. Tell me what you want to see. SIP ALG config system settings set sip-helper disable set sip-nat-trace disable set sip-tcp-port 5061 set sip-udp-port 5061 set multicast-forward enable end Interesting Sidenote VoIP phones, with no special configuration can register fine to proxy.sipgate.co.uk, which has an IP address of 217.10.79.16. Which is cool. Two phones are using a different provider, whose proxy IP address is 178.255.x.x. These phones can register for outbound, but inbound INVITEs never make it to the phone. Is it possible that the Fortigate is having trouble with 178.255.x.x as it's got a 255 in it? Or am I just imagining things?

    Read the article

  • Replacing the LCD panel in a netbook (Asus Eee PC 1005)

    - by neilfein
    Yesterday, I was cleaning up and dropped my Asus Eee 1005PE. The screen is cracked inside (i.e., cracks are visible only when on), and no longer works properly. I booted up with another monitor attached, and the computer itself is fine, but needs a new screen. Best Buy wants at least $250 to repair it (that includes their $150 fee to breathe in the same room as the unit), and Asus was of no help at all. (They're incredibly cagey and won't provide any money numbers at all, not even the cost of the part.) If replacing the LCD is no more trouble than replacing memory or a hard drive, I can do that. It's within my means to buy the part (18G241010402, a TFT LCD), but I'd like to know more about the procedure involved. My question: How does one replace the screen in this unit? Do I simply open the case and swap out the unit, or do I need to disassemble anything else to get to the screen? I don't want to order the part and then end up in a situation like this. Is the case screwed shut, or is it like an iPod where they glue things closed? I know enough about my abilities with a soldering gun to not attempt to solder tiny wires, would any of that be involved?

    Read the article

  • On clients use generic driver for printer shared by CUPS

    - by Daniel
    I know this worked really easy with a recent CUPS version some years ago. Unfortunately I fail to do the following with latest CUPS nowadays. How to share a printer without using printer specific drivers on the clients with CUPS? The printer is a Samsung ML-2010. The important fact is that it needs a quite specific library for printing called splix. That is installed on the server and prints well. What makes trouble is using that printer over the network. I found out how to use Avahi under Linux to make use of DNSSD to advertise and discover printers. But as far as I understand the new CUPS offers the internal driver interface on the network. This has 2 major issues: anybody can fiddle with the driver and I don't trust any uncommon printer library to be "network secure" anyone who wants to use my printer including guests needs to install the specific drivers first I remember the old days when I could enable "Share this printer" on the CUPS server and all clients would magically detect the printer and just send their job data to the server and have it do the driver stuff. After everything a read I guess this is related to the changes Apple introduced with CUPS including dropping of the integrated network discovery protocol. If it helps: Server: Ubuntu LTS 12.04 Server with CUPS 1.5.3 Client: Arch Linux with current CUPS 1.6.1 On another box with Ubuntu the printer was setup automatically at least but the mechanism used the Splix library for that.

    Read the article

  • Centos repository packages vs latest developer release

    - by fran
    I have started to run a personal server using CentOS and I have noticed that many packages that are available to install from repository are old compared with the latest release from the developer. I know that installing packages from repository is very easy and I guess that the supplied versions are stable and prepared to work without any trouble, but I still find odd having so much software that lags behind the current version. It's my first time with linux and I don't know what is the "normal" thing, should I stick to whatever version the repository supplies, or try to get the latest from the developer? To be more precisely, the repository supplies the apache httpd web server with version 2.2, I wanted to update to 2.4, so I started removing apache and its dependencies packages that come with centos to use the latest ones, but when I was about to remove pcre v6 to replace it with v8, i found out that 132 installed packages depend on it and probably it is not a good idea to remove it, so that made me think twice about getting the latest software instead of using the packages supplied by the official repositories. Should I leave things as they are instead of going on an upgrade rampage? Thanks

    Read the article

  • How can I stop Excel from eating my delicious CSV files and excreting useless data?

    - by atroon
    I have a database which tracks sales of widgets by serial number. Users enter purchaser data and quantity, and scan each widget into a custom client program. They then finalize the order. This all works flawlessly. Some customers want an Excel-compatible spreadsheet of the widgets they have purchased. We generate this with a PHP script which queries the database and outputs the result as a CSV with the store name and associated data. This works perfectly well too. When opened in a text editor such as Notepad or vi, the file looks like this: "Account Number","Store Name","S1","S2","S3","Widget Type","Date" "4173","SpeedyCorp","268435459705526269","","268435459705526269","848 Model Widget","2011-01-17" As you can see, the serial numbers are present (in this case twice, not all secondary serials are the same) and are long strings of numbers. When this file is opened in Excel, the result becomes: Account Number Store Name S1 S2 S3 Widget Type Date 4173 SpeedyCorp 2.68435E+17 2.68435E+17 848 Model Widget 2011-01-17 As you may have observed, the serial numbers are enclosed by double quotes. Excel does not seem to respect text qualifiers in .csv files. When importing these files into Access, we have zero difficulty. When opening them as text, no trouble at all. But Excel, without fail, converts these files into useless garbage. Trying to instruct end users in the art of opening a CSV file with a non-default application is becoming, shall we say, tiresome. Is there hope? Is there a setting I've been unable to find? This seems to be the case with Excel 2003, 2007, and 2010.

    Read the article

  • How to Set Up an SMTP Submission Server on Linux

    - by Kevin Cox
    I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

    Read the article

  • PCI Tv Tuner not receiving signal

    - by C-dizzle
    I inherited an Angel II PCI Dual TV Tuner card, popped it into my computer's PCI slot, plugged in my coax cable, but am having trouble getting any type of signal to it. The computer I am using is Windows 7 Ultimate 32 bit, I know the card works because the computer recognizes it and installs the drivers, or at least I assume it works because of that. I'm trying to use Windows Media Center to watch/record tv. Here are a few things I have tried to get it working: Uninstalled/Reinstalled the newest drivers Tried hooking up an antenna to the coax input instead of my cable Instead of using cable splitter, went directly from wall output into card with coax cable Tried using different output on splitter in case the out port was bad I haven't tried a different coax cable yet, it should be fine since it's pretty new. Since this is my first time setting up a TV Tuner card, is there anything specific that I need to do with it? Is there any configuration that needs to be done on it? Do I need to have a digial receiver? I was getting pretty frustrated with it so I wanted to turn here to the experts, I'm sure someone can help me figure it out.

    Read the article

  • Diagnosing Random Network Lag

    - by uesp
    I'm having trouble diagnosing some random lag on a 6 server LAMP cluster serving a MediaWiki site. While we're serving some 100 pages/sec the servers themselves are running fine with less than 0.5 load, no locked processes, no paging, no errors being logged, etc.... Lag is present on all servers and is random: one minute its fine the next it's there. DNS lookups on the servers are randomly slow. For example time nslookup google.com varies randomly from a few milliseconds to several seconds and sometimes times out entirely. While we use IP addresses internally on the cluster this may be a symptom of the root issue. We are not running our own DNS server. The Apache server-status pages randomly lag or time out. Benchmarking using ab between servers shows a few loads sometimes take 3000 ms (almost exactly). Benchmarking server-status on the local server itself usually shows no issue (it showed a lag only once among a few hundred tests). The servers are sitting behind a switch and a firewall which I don't have any access to so I don't know their setup or status. While we are under heavier than normal load a 2 Mbps incoming and 20 Mbps outgoing traffic shouldn't be stressing the switch or firewall should it? My feeling is that it is the switch/firewall or something above them in the ISP like their DNS but can't confirm it. I need some other tests or methods of diagnosing this lag to try and narrow down the ultimate cause.

    Read the article

  • Why does my computer sometimes not identify my wireless network, or others, that it always connects to?

    - by Emile Erasmus
    I have a vista operating system. Sometimes my computer will not connect to the wireless network (internet) when I start up my laptop. This happens at different places on occasion, and it is very random. It tries to connect, but can not identify the network (it does recognize the wifi name). So at the end it connects, but with limited connectivity. It can not be the hardware because all other computers connect to it fine at the same time. And it happens at different places, mostly home, but sometimes at coffee shops, etc. And then in a day or two when I start up my laptop it is all of a sudden working again. (restart does not solve the problem). I have tried all the trouble shooting options windows offers, restarting the notebook, switch modem on and off, switch laptop wifi on and of, deleted the wifi memory from the laptop and reconnected with the password as if it was the first time, everything. If it does not work at one place it does not mean it won't work at another. Example it won't work at home, then I go to coffee shop and it works, then get back home and it don't. Anyone encountered this before?

    Read the article

  • Recovering ZFS pool with errors on import.

    - by Sqeaky
    I have a machine that had some trouble with some bad RAM. After I diagnosed it and removed the offending stick of RAM, The ZFS pool in the machine was trying to access drives by using incorrect device names. I simply exported the pool and re-imported it to correct this. However I am now getting this error. The pool Storage no longer automatically mounts sqeaky@sqeaky-media-server:/$ sudo zpool status no pools available A regular import says its corrupt sqeaky@sqeaky-media-server:/$ sudo zpool import pool: Storage id: 13247750448079582452 state: UNAVAIL status: The pool is formatted using an older on-disk version. action: The pool cannot be imported due to damaged devices or data. config: Storage UNAVAIL insufficient replicas raidz1 UNAVAIL corrupted data 805066522130738790 ONLINE sdd3 ONLINE sda3 ONLINE sdc ONLINE A specific import says the vdev configuration is invalid sqeaky@sqeaky-media-server:/$ sudo zpool import Storage cannot import 'Storage': invalid vdev configuration I should have 4 devices in my ZFS pool: /dev/sda3 /dev/sdd3 /dev/sdc /dev/sdb I have no clue what 805066522130738790 is but I plan on investigating further. I am also trying to figure out how to use zdb to get more information about what the pool thinks is going on. For reference This was setup this way, because at the time this machine/pool was setup it needed certain Linux features and booting from ZFS wasn't yet supported in Linux. The partitions sda1 and sdd1 are in a raid 1 for the operating system and sdd2 and sda2 are in a raid1 for the swap. Any clue on how to recover this ZFS pool?

    Read the article

  • Can I clone my hard drive to an external and boot from the clone?

    - by willbuntu
    First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

    Read the article

  • one 16K random read I/O issues 2 scsi I/O (16K and 4K) requests in linux

    - by hiroyuki
    I noticed weird issue when benchmarking random read I/O for files in linux (2.6.18). The Benchmarking program is my own program and it simply keeps reading 16KB of a file from a random offset. I traced I/O behavior at system call level and scsi level by systemtap and I noticed that one 16KB sysread issues 2 scsi I/Os as following. SYSPREAD random(8472) 3, 0x16fc5200, 16384, 128137183232 SCSI random(8472) 0 1 0 0 start-sector: 226321183 size: 4096 bufflen 4096 FROM_DEVICE 1354354008068009 SCSI random(8472) 0 1 0 0 start-sector: 226323431 size: 16384 bufflen 16384 FROM_DEVICE 1354354008075927 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 21807710208 SCSI random(8472) 0 1 0 0 start-sector: 1889888935 size: 4096 bufflen 4096 FROM_DEVICE 1354354008085128 SCSI random(8472) 0 1 0 0 start-sector: 1889891823 size: 16384 bufflen 16384 FROM_DEVICE 1354354008097161 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 139365318656 SCSI random(8472) 0 1 0 0 start-sector: 254092663 size: 4096 bufflen 4096 FROM_DEVICE 1354354008100633 SCSI random(8472) 0 1 0 0 start-sector: 254094879 size: 16384 bufflen 16384 FROM_DEVICE 1354354008111723 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 60304424960 SCSI random(8472) 0 1 0 0 start-sector: 58119807 size: 4096 bufflen 4096 FROM_DEVICE 1354354008120469 SCSI random(8472) 0 1 0 0 start-sector: 58125415 size: 16384 bufflen 16384 FROM_DEVICE 1354354008126343 As shown above, one 16KB pread issues 2 scsi I/Os. (I traced scsi io dispatching with probe scsi.iodispatching. Please ignore values except for start-sector and size.) One scsi I/O is 16KB I/O as requested from the application and it's OK. The thing is the other 4KB I/O which I don't know why linux issues that I/O. of course, I/O performance is degraded by the weired 4KB I/O and I am having trouble. I also use fio (famous I/O benchmark tool) and noticed the same issue, so it's not from the application. Does anybody know what is going on ? Any comments or advices are appreciated. Thanks

    Read the article

  • Can a OS be copied from one hard drive to another and still boot?

    - by AlexMorley-Finch
    Background My computer gets stuck on the make and model screen after the BIOS screen, aka the Toshiba screen. After some research I've realized that the problem is the hard drive. I'm using an old 250gb model that USED to be used for backup purposes, however I loaded windows 7 ultimate onto it This hard drive has trouble getting up to full RPM therefore cannot boot correctly until its warmed up. meaning that my pc needs to be restarted several times before it boots (once it took my 13 reboots to get my pc on!) From my research its either that, or lack of power supply, and I've tried multiple PSUs. Question I have my OS and all my files on this 250gb HDD... If I were to literally open the explorer, and copy EVERYTHING (including hidden files obviously) from this 250gb, to a spare 500gb I've got knocking about... Will it boot if I just copy everything? I cannot be bothered to load another OS onto my PC so if there is a way I can just copy the existing one over from one HDD to another and have it boot normally. This would be epic! I've heard about HDD cloning software. But before I purchase and/or download this software, I need to know if i can just copy the OS over through the windows explorer

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >