Search Results

Search found 19145 results on 766 pages for 'network bridge'.

Page 244/766 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • Microsoft Cloud Day - the ups and downs

    - by Charles Young
    The term ‘cloud’ can sometimes obscure the obvious.  Today’s Microsoft Cloud Day conference in London provided a good example.  Scott Guthrie was halfway through what was an excellent keynote when he lost network connectivity.  This proved very disruptive to his presentation which centred on a series of demonstrations of the Azure platform in action.  Great efforts were made to find a solution, but no quick fix presented itself.  The venue’s IT facilities were dreadful – no WiFi, poor 3G reception (forget 4G…this is the UK) and, unbelievably, no-one on hand from the venue staff to help with infrastructure issues.  Eventually, after an unscheduled break, a solution was found and Scott managed to complete his demonstrations.  Further connectivity issues occurred during the day. I can say that the cause was prosaic.  A member of the venue staff had interfered with a patch board and inadvertently disconnected Scott Guthrie’s machine from the network by pulling out a cable. I need to state the obvious here.  If your PC is disconnected from the network it can’t communicate with other systems.  This could include a machine under someone’s desk, a mail server located down the hall, a server in the local data centre, an Internet search engine or even, heaven forbid, a role running on Azure. Inadvertently disconnecting a PC from the network does not imply a fundamental problem with the cloud or any specific cloud platform.  Some of the tweeted comments I’ve seen today are analogous to suggesting that, if you accidently unplug your microwave from the mains, this suggests some fundamental flaw with the electricity supply to your house.   This is poor reasoning, to say the least. As far as the conference was concerned, the connectivity issue in the keynote, coupled with some later problems in a couple of presentations, served to exaggerate the perception of poor organisation.   Software problems encountered before the conference prevented the correct set-up of a smartphone app intended to convey agenda information to attendees.  Although some information was available via this app, the organisers decided to print out an agenda at the last moment.  Unfortunately, the agenda sheet did not convey enough information, and attendees were forced to approach conference staff through the day to clarify locations of the various presentations. Despite these problems, the overwhelming feedback from conference attendees was very positive.  There was a real sense of excitement in the morning keynote.  For many, this was their first sight of new Azure features delivered in the ‘spring’ release.  The most common reaction I heard was amazement and appreciation that Azure’s new IaaS features deliver built-in template support for several flavours of Linux from day one.  This coupled with open source SDKs and several presentations on Azure’s support for Java, node.js, PHP, MongoDB and Hadoop served to communicate that the Azure platform is maturing quickly.  The new virtual network capabilities also surprised many attendees, and the much improved portal experience went down very well. So, despite some very irritating and disruptive problems, the event served its purpose well, communicating the breadth and depth of the newly upgraded Azure platform.  I enjoyed the day very much.

    Read the article

  • CodePlex Daily Summary for Monday, June 07, 2010

    CodePlex Daily Summary for Monday, June 07, 2010New ProjectsAgile Personal Development Methodology: 本项目并不是软件开发项目,它是一个关注个人能力发展的项目,希望通过大家的积极参与和实践,在价值观、原则和最佳实践的基础上不断丰富和完善这些内容。我将主要从生活、工作和个人三个主要方面来指导个人如何快速地提高自己的能力。在工作方面,首先关注的是IT技术人员。 希望本方法论的不断完善,能够对不同阶...Altairis Mail Toolkit: Altairis Mail Toolkit is a component for .NET developers making easy to send templated and localized e-mail messages. Uses standard resource mechan...AmazonPriceTicker: AmazonPriceTicker ist ein kleines ASP.NET-Projekt für unser Studium.CC.Hearts Screen Saver: A complete screensaver that draws pretty hearts. Supports all standard screensaver functionality (preview window, options, multi-monitor). Written...Controle Financeiro com DDD: Projeto para fins de estudo das tencologias: - DDD - TDD - Asp Net MVCDebugWriterTextBox: This is modified TextBox which can catch up Debug.Write() and display log. Also it can write log data to file - all you need is to set up file name!DEIConsultingDev: DEI Consulting DEVEasy Augmented Reality Suite for Silverlight: Easy Augmented Reality Suite for SilverlightEvent Broker: Simple event broker with an hierarchical implementation.fleet It: A WPF Client for Team Space. Developed using WPF and C#. Various URL Shortening services integrated.Gest-Bus: Gest-BusHNV Project: Projects created by Hoàng, Ngọc, VũHotel Management System: Hotel Management System : concerned in making a complete website for a hotel every thing in hotel in just one web application : Finance , managemen...ISEN découverte majeure application mobile: ISEN découverte majeure application mobile contrôle d'un pc par un téléphone portable avec plateforme windows 7 LiveSequence: Based in the sequence diagramming control of Nauman Leghari.NHash: This is a simple project that integrates with Explorer and Computes MD5 and SHA1.NHibernate Sidekick Library: NHibernate Sidekick is a library intended to assist in the development of multi-tiered applications using the NHibernate ORM framework.ScrewTurn ASP.NET Proxy Membership Provider: Plugin for the ScrewTurn Wiki System to use Standard ASP.NET Membership and Role providers.Silverlight SNS: We are going to develop a SNS web application based on Silver lightSilverPoiMap: SilverPoiMap provides interactive searching and management of Points of Interest. It is a Facebook client application which allow you to connect to...Simple Resource Localization Editor: Simple editor that simplifies localization and synchronization of .NET resource files (.resx).SimpleBlog.NET MVC: A very simple blog engine developed in ASP.NET 3.5 MVC2 and C#.Siverlight Project: Hope that everybody continue to develop it.SpaceConquest: Incorporated standard design patterns to build a peer to peer game in Java. The game rules were similar in complexity to games like Civilization an...Yasts: Yasts - Yet Another Space Trading Sim - This is a learning environment project.New ReleasesAgile Personal Development Methodology: 敏捷个人-认识自我,管理自我.pdf: 去年我在blog上写了个人管理系列的一些blog,其中一些文章深受大家的喜欢。想到写这个系列是源于在实施敏捷Scrum方法时,对方法实施是否对人的水平需要高要求的一些思考。自组织团队是建立在敏捷个人之上的,没有个人就没有团队,实施Scrum对人要求不高,但想实施得好,那么对人的要求肯定不低。 ...Altairis Mail Toolkit: 1.0.0 RTM: Initial releaseAndrew's XNA Helpers: Andrew's Xna Helpers V1.1: Currently only supports X86 projects since portions of the code have to be reworked to work with the xbox. I do plan to code it for the 360 though....C#Mail: Higuchi.Mail.dll (2010.6.6 ver): Higuchi.Mail.dll (2010.4.30 ver)Community Forums NNTP bridge: Community Forums NNTP Bridge V31: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Html Agility Pack: Experimental Xpath Updates: In efforts to update make Html Agility Packs Xpath support to be closer to the System.Xml.Xpath implementation I have updated HAP to have all nodes...imdb movie downloader: myImdb 0.9.2: myImdb 0.9.2 Fully changed...and added some more features.. working with XML movie list... Used Backgroundworker more clever results and guess m...InfoService: InfoService v1.6 - MPE1 or RAR Package: InfoService Release v1.6.0.136 Please read Plugin installation for installation instructions.ISEN découverte majeure application mobile: appli traitement d'image: but : capturer, redimensionner l'image de l'écran d'un pc.Jeremi Stadler: Clipboard Manager: Version 1.0.5.14 It's finally here! I have been working on this one the whole night but it's worth it ;) The program catches clipboard changes an...mesoBoard: mesoBoard 0.9 - Beta: mesoBoard version 0.9 beta Released under the New BSD License. http://mesoboard.codeplex.com/license http://mesoboard.comMiniTwitter: 1.13: MiniTwitter 1.13 変更内容 修正 ダイレクトメッセージの取得に失敗するバグを修正 タイムラインを編集すると落ちるバグを修正 リストのインポートで最初の 20 人しか取得できない問題を修正 追加 URL マウスオーバーでの画像のプレビュー機能を実装MiniTwitter: 1.13.1: MiniTwitter 1.13.1 更新内容 修正 タイムライン追加、編集ダイアログでキャンセルを選ぶと落ちるバグを修正MSTS Editors & Tools: Simis Editor v0.4: Simis Editor v0.4 Open and Save dialogs support full filename filters from BNFs (e.g. "tsection.dat"). Added statusbar and menu help text. Adde...NHibernate Sidekick Library: 0.6.0: v0.6.0 - Initial Release TODONLog - Advanced .NET Logging: Nightly Build 2010.06.06.001: Changes since the last build:2010-06-05 21:50:21 Jarek Kowalski fixed doc for ${document-uri} 2010-06-05 20:21:53 Jarek Kowalski removed Layout re...NQ - Component-oriented Framework: NQ Core 0.90: Main changes in 0.90 release: Introduction of an additional built-in component loader to load component and service information from XML files ins...PhluffyFotos: v4 Windows Azure: This release has been updated to Visual Studio 2010 as well as the latest StorageClient library. Make sure you run the Provision.cmd in order to b...RIA Services Essentials: Book Club Application (June 6, 2010): The initial release of the BookClub application based on the MIX presentation with a few changes: 1. Some bug fixes 2. Added the ability to Like a ...Samurai.Workflow: 1.1 Stable Release: Removed reference to WPF assemblies so non-WPF applications can use the workflow. For WPF apps, the workflow will use reflection to seek out UI thr...SilverPoiMap: SilverPoiMap Beta: Beta VersionSimple Resource Localization Editor: Release 1: First release.Siverlight Project: Auto Arrange Panel Project: Auto Arrange Panel ProjectSmart Voice: Smart Voice 0.2: Changelog: Corrected a few bugsSmart Voice: Smart Voice 0.2.1: Changelog: Fixed a major bug that was slowing the application Added opt in for usage data In order to contribute with user data, please change t...Spider Compiler: Release 0.1: Contains the setup for the spider compiler. This release includes the changeset #66980.Spider Compiler: Release 0.2: This release includes the changeset #67003.The Lounge Repository: Lounge Repo Binary Release: All in one binary download of the Lounge Repository. Improvements: -More tolerant towards schema changes -Bug fixed regarding array normalization ...UrzaGatherer: UrzaGatherer v2.0.1: This release integrate the support of the Full Database Backup.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 beta 3: This is the last beta version before the official release of Visual WebGui, including support for Visual Studio 2010 and it is fully featured with ...WinGet: Alpha 2: This is the second release of WinGet (0.5.0.2). Is is alpha quality not suitable for use in a production environment and it has bugs (see Known Iss...WoW Character Viewer: WoW Viewer: Newly redesigned layout of the original WoW Character Viewer. Faster access, cleaner layout.Most Popular ProjectsCommunity Forums NNTP bridgeASP.NET MVC Time PlannerMoonyDesk (windows desktop widgets)NeatUploadOutSyncFileupload AJAXViperWorks IgnitionAgUnit - Silverlight unit testing with ReSharperSQL Nexus ToolSmith Async .NET Memcached ClientMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationStyleCopN2 CMSsmark C# LibraryFarseer Physics EngineIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-15

    - by Bob Rhubart
    URGENT BULLETIN: Disable JRE Auto-Update for All E-Business Suite End-Users All desktop administrators must IMMEDIATELY disable the Java Runtime Environment (JRE) Auto-Update option for all Windows end-user desktops connecting to Oracle E-Business Suite Release 11i, 12.0, and 12.1. WebLogic JMS / AQ bridge with JBoss AS 7 | Edwin Biemond Oracle ACE Edwin Biemond explains "how you can retrieve JMS messages from JBoss with the help of a WebLogic Foreign Server and how to push messages to JBoss AS with the help of a WebLogic JMS Bridge." The Healthy Tension That Mobility Creates | Hernan Capdevila "Mobile device management in the cloud makes good sense," says Hernan Capdevila. "I don't think IT departments should be hosting device management and managing that complexity. It should be a cloud service." OPN: Fusion Middleware Summer Camps in July in Lisbon and Munich For specialized Oracle Partners. Participation is limited to two people per company at each bootcamp. Registration is first come first serve. Take note of the skill requirements and, prerequisites. Podcast: Cows in the Cloud and the importance of standards In part two of a four-part program Cloud experts Jim Baty, Mark Nelson, William Vambenepe, and Ajay Srivastava explain cows in the cloud and talk about the importance of standards. Community members talk about the challenges and opportunities mobile computing presents for IT architects. Apple has sold 55 million iPads since 2010. Gartner expects a 98% increase in tablet sales in 2012, to 118 million. Nielsen reports that smartphones now account for nearly half of all mobile phones in the U.S., a 38% increase over 2011. And the mobile juggernaut is just getting started. Thought for the Day "Why are video games so much better designed than office software? Because people who design video games love to play video games. People who design office software look forward to doing something else on the weekend." — Ted Nelson Source: SoftwareQuotes.com

    Read the article

  • At the Java DEMOgrounds - Oracle Java ME Embedded Enables the “Internet of Things”

    - by Janice J. Heiss
    I caught up with Oracle’s Robert Barnes, Senior Director, Java Product Management, who was demonstrating a new product from Oracle’s Java Platform, Micro Edition (Java ME) product portfolio, Oracle Java ME Embedded 3.2, a complete client Java runtime optimized for microcontrollers and other resource-constrained devices. Oracle’s Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228).“What we are showing here is the Java ME Embedded 3.2 that we announced last week,” explained Barnes. “It’s the start of the 'Internet of Things,’ in which you have very very small devices that are on the edge of the network where the sensors sit. You often have a middle area called a gateway or a concentrator which is fairly middle to higher performance. On the back end you have a very high performance server. What this is showing is Java spanning all the way from the server side right down towards the type of chip that you will get at the sensor side as the network.” Barnes explained that he had two different demos running.The first, called the Solar Panel System Demo, measures the brightness of the light.  “This,” said Barnes, “is a light source demo with a Cortex M3 controlling the motor, on the end of which is a sensor which is measuring the brightness of the lamp. This is recording the data of the brightness of the lamp and as we move the lamp out of the way, we should be able using the server to turn the sensor towards the lamp so the brightness reading will go higher. This sends the message back to the server and we can look at the web server sitting on the PC underneath the desk. We can actually see the data being passed back effectively through a back office type of function within a utility environment.” The second demo, the Smart Grid Response Demo, Barnes explained, “has the same board and processor and is still using Java ME embedded with a different app on top. This is a demand response demo. What we are seeing within the managing environment is that people want to track the pricing signals of the electricity. If it’s particularly expensive at any point in time, they may turn something off. This demo sets the price of the electricity as though this is coming from the back of the server sending pricing signals to my home.” The demo had a lamp and a fan and it was tracking the price of electricity. “If I set the price of the electricity to go over 5 cents, then the device will turn off,” explained Barnes. “I can go into my settings and, in this case, change the price to 50 cents and we can wait a minus and the lamp will go off. When I change the pricing signal so that it is lower, the lamp will come back on. The key point is that the Java software we have running is the same across all the different devices; it’s a way to build applications across multiple devices using the same software. This is important because it fixes peak loading on the network and can stops blackouts.” This demo brought me back to a prior decade when Sun Microsystems first promoted  Jini technology, a version of Java that would put everything on the network and give us the smart home. Your home would be automated to tell you when you were out of milk, when to change your light bulbs, etc. You would have access to the web and the network throughout your home.It’s interesting to see how technology moves over time – from the smart home to the Internet of Things.

    Read the article

  • Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

    - by Ravindra Pamidi
    A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

    Read the article

  • Ubuntu 13.10 No Sound

    - by spiersie
    I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

    Read the article

  • Wireless doesn't work on a Broadcom BCM4312

    - by Boderick
    As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

    - by YumYumYum
    I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

    Read the article

  • I can't enable extra effects in Ubuntu 10.10. Please help?

    - by jasoncruz98
    I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

    Read the article

  • Should I expose IObservable<T> on my interfaces?

    - by Alex
    My colleague and I have dispute. We are writing a .NET application that processes massive amounts of data. It receives data elements, groups subsets of them into blocks according to some criterion and processes those blocks. Let's say we have data items of type Foo arriving some source (from the network, for example) one by one. We wish to gather subsets of related objects of type Foo, construct an object of type Bar from each such subset and process objects of type Bar. One of us suggested the following design. Its main theme is exposing IObservable objects directly from the interfaces of our components. // ********* Interfaces ********** interface IFooSource { // this is the event-stream of objects of type Foo IObservable<Foo> FooArrivals { get; } } interface IBarSource { // this is the event-stream of objects of type Bar IObservable<Bar> BarArrivals { get; } } / ********* Implementations ********* class FooSource : IFooSource { // Here we put logic that receives Foo objects from the network and publishes them to the FooArrivals event stream. } class FooSubsetsToBarConverter : IBarSource { IFooSource fooSource; IObservable<Bar> BarArrivals { get { // Do some fancy Rx operators on fooSource.FooArrivals, like Buffer, Window, Join and others and return IObservable<Bar> } } } // this class will subscribe to the bar source and do processing class BarsProcessor { BarsProcessor(IBarSource barSource); void Subscribe(); } // ******************* Main ************************ class Program { public static void Main(string[] args) { var fooSource = FooSourceFactory.Create(); var barsProcessor = BarsProcessorFactory.Create(fooSource) // this will create FooSubsetToBarConverter and BarsProcessor barsProcessor.Subscribe(); fooSource.Run(); // this enters a loop of listening for Foo objects from the network and notifying about their arrival. } } The other suggested another design that its main theme is using our own publisher/subscriber interfaces and using Rx inside the implementations only when needed. //********** interfaces ********* interface IPublisher<T> { void Subscribe(ISubscriber<T> subscriber); } interface ISubscriber<T> { Action<T> Callback { get; } } //********** implementations ********* class FooSource : IPublisher<Foo> { public void Subscribe(ISubscriber<Foo> subscriber) { /* ... */ } // here we put logic that receives Foo objects from some source (the network?) publishes them to the registered subscribers } class FooSubsetsToBarConverter : ISubscriber<Foo>, IPublisher<Bar> { void Callback(Foo foo) { // here we put logic that aggregates Foo objects and publishes Bars when we have received a subset of Foos that match our criteria // maybe we use Rx here internally. } public void Subscribe(ISubscriber<Bar> subscriber) { /* ... */ } } class BarsProcessor : ISubscriber<Bar> { void Callback(Bar bar) { // here we put code that processes Bar objects } } //********** program ********* class Program { public static void Main(string[] args) { var fooSource = fooSourceFactory.Create(); var barsProcessor = barsProcessorFactory.Create(fooSource) // this will create BarsProcessor and perform all the necessary subscriptions fooSource.Run(); // this enters a loop of listening for Foo objects from the network and notifying about their arrival. } } Which one do you think is better? Exposing IObservable and making our components create new event streams from Rx operators, or defining our own publisher/subscriber interfaces and using Rx internally if needed? Here are some things to consider about the designs: In the first design the consumer of our interfaces has the whole power of Rx at his/her fingertips and can perform any Rx operators. One of us claims this is an advantage and the other claims that this is a drawback. The second design allows us to use any publisher/subscriber architecture under the hood. The first design ties us to Rx. If we wish to use the power of Rx, it requires more work in the second design because we need to translate the custom publisher/subscriber implementation to Rx and back. It requires writing glue code for every class that wishes to do some event processing.

    Read the article

  • Try the Oracle Database Appliance Manager Configurator - For Fun!

    - by pwstephe-Oracle
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 If you would like to get a first hand glimpse of how easy it is to configure an ODA, even if you don’t have access to one, it’s possible to download the Appliance Manager Configurator from the Oracle Technology Network, and run it standalone on your PC or Linux/Unix  workstation. The configurator is packaged in a zip file that contains the complete Java environment to run standalone. Once the package is downloaded and unzipped it’s simply a matter of launching it using the config command or shell depending on your runtime environment. Oracle Appliance Manager Configurator is a Java-based tool that enables you to input your deployment plan and validate your network settings before an actual deployment, or you can just preview and experiment with it. Simply download and run the configurator on a local client system which can be a Windows, Linux, or UNIX system. (For Windows launch the batch file config.bat for Linux/Unix environments, run  ./ config.sh). You will be presented with the very same dialogs and options used to configure a production ODA but on your workstation. At the end of a configurator session, you may save your deployment plan in a configuration file. If you were actually ready to deploy, you could copy this configuration file to a real ODA where the online Oracle Appliance Manager Configurator would use the contents to deploy your plan in production. You may also print the file’s content and use the printout as a checklist for setting up your production external network configuration. Be sure to use the actual production network addresses you intend to use it as this will only work correctly if your client system is connected to same network that will be used for the ODA. (This step is not necessary if you are just previewing the Configurator). This is a great way to get an introductory look at the simple and intuitive Database Appliance configuration interface and the steps to configure a system. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Google Music Player doesn't work

    - by EricoPF
    I'm trying to log in on Google Music Player application but doesn't work. I get the message below: Login Failed Could not identify your computer. Learn More On Google Help it says that it doesn't run on virtual machines, which is not my case, but I have a virtualbox installed though, and it says some people get to work if they disable their bridge network. The thing is I don't have any bridge interface, even if I remove all virtualbox modules I still get this message. This is my ifconfig output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:15374 errors:0 dropped:0 overruns:0 frame:0 TX packets:15374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1455889 (1.4 MB) TX bytes:1455889 (1.4 MB) wlan0 Link encap:Ethernet HWaddr 94:db:c9:b2:1b:d7 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::96db:c9ff:feb2:1bd7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:828467 errors:0 dropped:0 overruns:0 frame:0 TX packets:568040 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1086663025 (1.0 GB) TX bytes:72984931 (72.9 MB) Any ideias ? Thanks guys! Cheers.

    Read the article

  • How do I configure an Intel HD Graphics 4000?

    - by derabbink
    First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

    Read the article

  • C# Open Source/Free Social Networking SDK

    - by Nix
    I am currently gathering some technology requirements for a site that will be a social network based. I don't want to re-invent the wheel so i am looking for some type of SDK or collection of tools that can provide me with a way of creating/managing a social network. I understand that no framework will probably fit my exact needs so I am also looking for a flexible/extendable framework. An example extension point would be allowing the user to provide sub networks, maybe a global network that could be sub classified as work and friends. Beyond that it would also be nice to somehow be able to import contacts from other networking sites (Facebook, Linked In, etc). My current technology suite will more than likely consist of the following: IIS 7.0 WCF Data Services SQL Server 2006 ASP.NET front end. So my two questions are 1) C# Open Source Social Network SDK 2) C# Open Source Social Netowrk APIs (facebook, linked in, etc) If there is any more information you may need please let me know.

    Read the article

  • Android 1.5 Gridview Problem

    - by flybirdtt
    I used a gridview in this app. When i run it at Verison 1.6 or newer, it's OK. But i can not get this gridview in 1.5. I always show this info and exception: Unable to resolve drawable "com.android.layoutlib.utils.DensityBasedResourceValue@397660" in attribute "listSelector" org.xmlpull.v1.XmlPullParserException: Binary XML file line #3: tag requires a 'drawable' attribute or child tag defining a drawable at android.graphics.drawable.StateListDrawable.inflate(StateListDrawable.java:151) at android.graphics.drawable.Drawable.createFromXmlInner(Drawable.java:779) at android.graphics.drawable.Drawable.createFromXml(Drawable.java:720) at com.android.layoutlib.bridge.ResourceHelper.getDrawable(ResourceHelper.java:150) at com.android.layoutlib.bridge.BridgeTypedArray.getDrawable(BridgeTypedArray.java:668) at android.widget.AbsListView.(AbsListView.java:514) at android.widget.GridView.(GridView.java:69) at android.widget.GridView.(GridView.java:65) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at android.view.LayoutInflater.createView(LayoutInflater.java:499) at android.view.BridgeInflater.onCreateView(BridgeInflater.java:77) at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java:562) at android.view.BridgeInflater.createViewFromTag(BridgeInflater.java:122) at android.view.LayoutInflater.rInflate(LayoutInflater.java:617) at android.view.LayoutInflater.rInflate(LayoutInflater.java:620) at android.view.LayoutInflater.inflate(LayoutInflater.java:407) at android.view.LayoutInflater.inflate(LayoutInflater.java:296) at com.android.layoutlib.bridge.Bridge.computeLayout(Bridge.java:377) at com.android.ide.eclipse.adt.internal.editors.layout.gle1.GraphicalLayoutEditor.computeLayout(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.layout.gle1.GraphicalLayoutEditor.recomputeLayout(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.layout.gle1.GraphicalLayoutEditor.activated(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.layout.LayoutEditor.pageChange(Unknown Source) at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:1076) at org.eclipse.ui.forms.editor.FormEditor.setActivePage(FormEditor.java:601) at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.selectDefaultPage(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.addPages(Unknown Source) at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138) at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:357) at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:662) at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595) at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:313) at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:180) at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:270) at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:473) at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256) at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209) at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1608) at org.eclipse.ui.internal.PartStack.add(PartStack.java:499) at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103) at org.eclipse.ui.internal.PartStack.add(PartStack.java:485) at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112) at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63) at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:225) at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:213) at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:778) at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:677) at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:638) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2854) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2762) at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2754) at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2705) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2701) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2685) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2676) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:361) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:168) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:229) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:208) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:274) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:250) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:373) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:526) at org.eclipse.ui.OpenAndLinkWithEditorHelper$InternalListener.open(OpenAndLinkWithEditorHelper.java:48) at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:842) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.core.runtime.Platform.run(Platform.java:888) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175) at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:840) at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1101) at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1205) at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:264) at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:258) at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:298) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) This is the layout xml: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="@drawable/menu_background2"> <LinearLayout android:id="@+id/logopanel" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_alignParentTop="true" android:layout_marginTop="50dip" android:gravity="center" android:layout_marginBottom="10dip"> <ImageButton android:id="@+id/searchbar" android:layout_width="fill_parent" android:layout_height="wrap_content" android:background="@drawable/fake_search_bar"></ImageButton> </LinearLayout> <LinearLayout android:id="@+id/iconpanel" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_below="@+id/logopanel" android:layout_above="@+id/allbotpanel" android:layout_marginTop="10dip"> <GridView android:id="@+id/gridcontent" android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="center" android:numColumns="3" android:layout_gravity="center" android:layout_centerInParent="true" android:background="@drawable/transparent_backgroud" android:listSelector="@drawable/gridviewselector"> </GridView> </LinearLayout> <RelativeLayout android:id="@+id/allbotpanel" android:layout_width="fill_parent" android:layout_height="75dip" android:background="@drawable/amex_bottom_bar" android:layout_alignParentBottom="true"> <LinearLayout android:id="@+id/noticebar" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="29dip" android:layout_above="@+id/homebottombar"> <ImageButton android:id="@+id/infoicon" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="left|center_vertical" android:layout_marginLeft="10dip" android:background="@drawable/amex_info_button" android:src="@drawable/infoselector"></ImageButton> <TextView android:id="@+id/noticeicon" android:gravity="center" android:layout_gravity="right|center_vertical" android:layout_width="wrap_content" android:layout_height="25dip" android:layout_weight="1" android:clickable="true" android:focusable="true" android:text="@string/notice_string"></TextView> </LinearLayout> <LinearLayout android:id="@+id/homebottombar" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="46dip" android:gravity="center" android:layout_alignParentBottom="true" android:background="@drawable/amex_bottom_bar" android:layout_marginBottom="3dip"></LinearLayout> </RelativeLayout> </RelativeLayout>

    Read the article

  • Article: Interceptors 1.1 in Java EE 6

    - by OracleTechnologyNetwork
    This Tip Of The Day (TOTD) attempts to explain the basics of Interceptors 1.1 - a "new" specification introduced in the Java EE 6. Interceptors do what they say - they intercept on invocations and lifecycle events on an associated target class. The specification is not entirely new as the concept is borrowed from the EJB 3.0 specification.

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >