Search Results

Search found 9715 results on 389 pages for 'servers'.

Page 244/389 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• HTTPS vs. VPN for communication between business partners?

  - by Andrew H

  A business partner has asked to set up a site-to-site VPN just so that a few servers can communicate with each other over HTTPS. I'm convinced this isn't necessary, or even desirable. To be fair it must be part of a wider policy, potentially even a legal requirement. However I'd like to convince them to simply offer an IP to us (and us only) and a port of their choosing for HTTPS. Has anyone had a similar experience, or had to come up with a cast-iron argument against a VPN? Allow me to expand a little - we have a web service that initiates a connection to the partner's corresponding service using an encrypted HTTP connection. The connection uses a client certificate to authenticate. The connection is firewalled so only our IPs can contact the service. So why is a VPN necessary?

  Read the article

• NTP configuration not recognized?

  - by Eugene S

  I'm trying to configure NTP on my machine but it seems that the parameters I set are not being read by the system. Below is my /etc/ntp.conf file. (I applied the most basic configuration to eliminate other issues) server 10.45.68.47 server 127.0.0.1 After I set the above configuration, I restart the ntpd process by doing the following: service ntpd restart And then I get the following output: Shutting down ntpd: [ OK ] ntpd: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Moreover, I can see the following in /var/etc/messages: Apr 2 10:54:07 hsystem1a ntpd[21067]: ntpd exiting on signal 15 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer1 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer2 Apr 2 10:54:07 hsystem1a ntpdate[21537]: no servers can be used, exiting So it seems that the ntpServer1 and the ntpServer2 are being read from somewhere instead of the IPs I configured in /etc/ntp.conf. NOTE: I done init 6 on the machine just in case. Thanks!

  Read the article

• Cheapest High Available Web Server [closed]

  - by xyz

  I would like to create a high-available setup (e.g. a small cluster) for a webserver, i.e. it will run Apache, PHP and MySQL. There will be between 2-8 small websites running with only very little traffic and workload. High availability is however very important. I don't want to be dependent on 1 datacenter, so there must be a minimum of 2 servers placed in different datacenters, and if one server goes down, the user must experience no or only a minimum of downtime - and no data loss. I have considered Amazon AWS using their Elastic Load Balancing, since it is possible to buy 2 EC2 instances in 2 availability zones and set up load balancing and RDS (Multi-AZ). However this seems rather expensive. Using the AWS price calculator http://calculator.s3.amazonaws.com/calc5.html it totals to 185$/month the first year (including the free tier). Are my calculations incorrect or is there a cheaper way to make this HA setup? Best regards

  Read the article

• Adding a MySQL StoredProcedure causes not responding state

  - by Omie

  I'm on Windows 7 ultimate 32bit + xampp 1.7.2 [MySQL v5.1.37] This is my stored procedure : delimiter // CREATE PROCEDURE updatePoints(IN parentid INT(5),IN userid INT(5)) DECLARE chpoints INT(5); BEGIN SELECT points INTO chpoints FROM quiz_challenges WHERE id = parentid; UPDATE quiz_users SET points = points + chpoints WHERE forumid=userid; END; // delimiter ; At first it was showing error 1064 while creating stored procedure. I added delimiters part and when I tried running the query from phpmyadmin, Firefox went into not responding state. After that I started Internet Explorer and tried opening my pages which use the same database, it worked fine. However, I tried opening phpmyadmin and IE went into not responding state as well. I restarted both servers. Later restarted PC. Tried again but its same behavior. So whats wrong with this tiny little code ? Am I missing something which might be causing infinite loop ? Thanks

  Read the article

• Why can I not access any file or directory created by PHP from FTP-client?

  - by user43053

  Hello there, If I create a directory with mkdir(), or create a file with fopen(), file_put_contents() or SimpleXMLElement::asXML(), I am unable to access the file with my FTP-client or c-Panel File Manager. If I try to delete or edit them, I get errors. Dreamweaver suggests it is a permission problem or a network or filesystem fault (but I've set the permissions with chmod() to 0777, and when I check the cPanel, it confirms chmod 777. I also tried to use fileowner() and the function returns int(99), the same owner as those files that I could access with my FTP-client. It seems files and directories created with PHP can only be modified or be deleted with PHP. I thought this must be a server setup related issue, so I write it here. I am on a shared server, and I have no idea about setting up servers. Thank you for your time. Kind regards Marius

  Read the article

• How to make WinServer's AD work with Linux DNS/DHCP on VMware?

  - by Borald

  Hope you're fine. I got 2 virtual machines : Windows Server 2008 with Active Directory installed. Linux that works as a DNS and DHCP Server I need to make them work together, but I don't if this is going to be possible because VMWARE is sharing the NIC with other virtual machines and computer itself. I've assigned different IP static adresses to the servers. Is there a way for me to make these things get interconnected and test them on some virtual clients ? Any help will be much appreciated... (useful links,tutorials,..) Thanks in advance !

  Read the article

• What's faster for web-server virtualization ? (virtualbox or KVM)

  - by marc

  I have question, does anyone try to set up a webserver (debian) using virtualbox (x64) ? Right now i have few servers in KVM (x64) but i think it work slowly... Can i get something more (faster, performance) using virtualbox (x64)? On my home installation it looks very fast. Should i move to vbox against kvm ? I'm looking for answer from someone who have in virtualbox (x64) real server (can be headless) (debian/ubuntu) not windows xp or other home using things ;) I also got xp, 2k3, ubuntu in virtualbox (x86) and for me looking faster than kvm(x64). But it's hard to say anything without real tests done by multiple users not just one.

  Read the article

• Can't ssh from Ubuntu to RHEL or CentOS

  - by Alex N

  I am trying to setup publickey based authenitcation for 2 different boxes. One RHEL another on e is CentOS. I am having same issue with both where ssh fails and falls back to password based authentication. Error that seems to be causing this is quite obscure: debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found Both boxes are completely unrelated. I have my public key in .ssh/authorized_keys file on both boxes, all permissions are checked and good(700 for .ssh and 600 for internals) I have bunch of other servers that are running on various flavors(Gentoo, Fedora, FreeBSD etc.) and publickey ssh works just fine, but CentOS and RHEL giving me this for some reason :( Anyone experienced this before? I am not even sure how to further analyze this issue :(

  Read the article

• how to create a simple radio station [on hold]

  - by John

  I've been digging around for ages but not getting very far so any links or tips would be massively appreciated. I want to create a central "radio station" in my home to stream one playlist to any computers pointing their browser to the ip within my internal network. I have an old mini slave mac mini running ubuntu and was originally thinking I could get php and apache to handle this but then quickly realised that of course, php will serve out streaming independently per connection ie no radio station. Are there any servers already built for this sort of behaviour? is shoutcast one of the only versions Thanks, John

  Read the article

• Thin web server - single or multiple instances per IP address:port?

  - by wchrisjohnson

  I'm deploying a rack/sinatra/web socket app onto several servers and will use thin as the web server (http://code.macournoyer.com/thin/). There are almost no views to show, so I am not front-ending it with a traditional web server like Apache or nginx. In general, you see thin started and the underlying config file for it has the number of server instances to start, say 3, and the port to start with, say 5000. So, in my example, when thin starts, it starts up three instances on a range of ports, starting on port 5000. If I have a series of virtual machines, say 3, 6, 9, etc. that I treat as a cluster, would/should I choose to start a single thin instance on each VM, or multiple instances on each VM? Why? Thanks - Chris

  Read the article

• Rsync over ssh with root access on both sides

  - by Tim Abell

  Hi, I have one older ubuntu server, and one newer debian server and I am migrating data from the old one to the new one. I want to use rsync to transfer data across to make final migration easier and quicker than the equivalent tar/scp/untar process. As an example, I want to sync the home folders one at a time to the new server. This requires root access at both ends as not all files at the source side are world readable and the destination has to be written with correct permissions into /home. I can't figure out how to give rsync root access on both sides. I've seen a few related questions, but none quite match what I'm trying to do. I have sudo set up and working on both servers.

  Read the article

• private subnet nat (openvpn / racoon)

  - by Jonas Schnelli

  I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

  Read the article

• Is paravirtualization evil?

  - by Daniel

  I have an VMWare ESX Server v3.5 with a few virtualized Debian Lenny VMs (kernel 2.6.22 with vmi) running Apache Tomcat 5.5. I enabled paravirtualization, and Disk IO increased from about 240MB/s to 380MB/s, making me a happy admin. The problem now is that my apache tomcat becomes deadlocked during startup, running with 200% CPU (I have 2 CPUS assigned to the VM), and don't know how to get both: A stable system and a fast system. I somewhere heared that paravirtualization is legacy anyway and won't be available on newer ESX servers. Is there a replacement for this seemingly performance-improving option, or is it discontinued becauses it is just unstable? What is the state of paravirtualization? Should I ignore it completely? Thanks for all answers in advance.

  Read the article

• How to invoke a command using specific proxy server?

  - by Xiè Jìléi

  Some applications support proxy (http proxy or socks proxy), and some are not. For browsers, I can specify proxy server in the preferences/options dialog, and other applications may be able to configure proxy servers in config files. For general purpose, can I invoke a command using a specific proxy? Like following: $ proxy-exec --type sock5 --server 1.2.3.4:8000 -- wget/ftp ... I'm using Ubuntu Maverick. P.S. In win32, it can be implemented by hijacking the socket dlls, maybe, I'm not familiar with Linux programming, but I guess it's possible in Linux. though.

  Read the article

• Windows 2012 Cluster on P6300 SCSI-3 Persistent Reservation issues

  - by Bruno J. Melo

  Scenario: 1 HP 6300 with latest XCS version 1 Command View 10.1 + with hosts defined as Windows 2008 2 BL460c Gen8 Servers with SPP 2012.10 and Windows Server 2012 Datacenter Edition with all the updates + MPIO feature enabled DSM v4.03.00 Cluster Analyser Tool triggers this error: Test Disk 0 does not support SCSI-3 Persistent Reservations commands needed to support clustered Storage Pools. Some storage devices require specific firmware versions or settings to function properly with failover clusters. Please contact your storage administrator or storage vendor to check the configuration of the storage to allow it to function properly with failover clusters. Any ideas? Thanks for your help!

  Read the article

• How do you monitor a monitoring server?

  - by organicveggie

  So we run Groundworks (with Nagios) on CentOS to monitor our various servers and processes. I have it setup to automatically send emails and SMS texts when things reach a WARNING or CRITICAL state. Normally this works perfectly. However, twice we've had problems with Postfix on that server where Postfix decides to stop sending email. The most recent time lasted 4 days because none of us noticed. That leads me to a important question: how am I supposed to monitor my monitoring server?

  Read the article

• Setup local EC2 style cloud?

  - by John Kramlich

  I was recently given 3 dual opteron 2400 servers with 4GB of RAM and 120GB hard drives. I am interested in setting up something similar to Amazon's EC2 for my own personal web development use. Basically, I would like to spin up instances from an ISO or other disk images and have them available to test and develop software. Are there open source solutions I can use to accomplish this? I am assuming one of the machines will need to act as a controller of some sort for the other two. I use Sun's VirtualBox on my local development machine to virtualize various versions of Microsoft Windows. However, I'm not sure if that's the best tool for what I am trying to achieve. I apologize in advance if this question is to vague to get meaningful responses. I am new to cloud computing and fairly new at server administration.

  Read the article

• route to vpn based on destination

  - by inquam

  I have a VPN connection on a Windows 7 machine. It's set up to connect to a server in US. Is it possible, and if so how, to setup so that .com destinations uses the vpn interface and .se destinations uses the "normal" connection? Edit (clarification): This is for outbound connections. I.e. the machine conencts to a server on foo.com and uses the VPN and the machine connects to bar.se and uses the "normal" interface. Let's say foo.com has an IP filter that ensures users are located in USA, if I go through the VPN I get a US ip and everything is fine. But tif all traffic goes this way the bar.se server that has a IP filter ensuring users are in Sweden will complain. So I want to route the traffic depending on server location. US servers through VPN and others through the normal interface.

  Read the article

• VPS hang when one Virtual CPU usage is 100%

  - by garconcn

  We are using Xen Center to manage all of our cPanel VPS servers. The hardware has two CPUs(Intel(R) Xeon(R) CPU [email protected]) and 32GB memory. Each hardware has 4 cPanel VPS and each VPS has 8GB memory and 4 Virtual CPUS. Every one or two months, one of the VPS server will hang because one Virtual CPU usage is 100% and it couldn't release the CPU unless we use force reboot. We have 10 similar hardware, and this cause our server down almost every day. We have tried to avoid the Statistics Processing and Fantastico update during the night, but the problem still happens randomly. I can not find anything in the server log when it hangs. Any clue? Thank you.

  Read the article

• Windows Server 2008 R2 Maximum Processor Limit Confusion

  - by Stevoni

  As I was looking through the Windows Server 2008 R2 specifications, I saw that the maximum supported processors is 64 sockets for Datacenter addition. This puts the maximum number or cores at 256 (if all sockets are quad cores), which I think it's just silly, but whatever. And now the questions: How does one set something like that up? (Obviously not for me, but humor me) Are there multiple dual socket motherboards running in a giant case with a ton of memory? How does the OS see all of the CPUs if they're on different boards? What would be a real world example of a need to have 64 sockets attached to one operating system vs 32 2 socket servers?

  Read the article

• does wordpress auto update work without a cron job?

  - by perler

  I'm a bit on a loss here. Since WP 3.7 you can update your wordpress automatically. Since then it's more hit and miss on several servers here. I would like to understand, if it is enough to enable automatic updates described here and how this would work without a cron job. I'm under the impression right now, that the upgrade is only started, when ever someone logs into the backend, is this correct? If so, is there a way to automate the updates via a cron job?

  Read the article

• using gmail to send mails from your php?

  - by ajsie

  i've read some threads here in SO that someone managed to use gmail's smtp server to send out messages from php script. so if php sends a mail to [email protected] it looks like this: php tells sendmail (smtp server) to send the message sendmail sends the message to gmail's smtp server gmail's smtp server sends the message to hotmail's smtp server so now i wonder, why should one use gmail's smtp server to send a mail? isn't it better just to send the message from sendmail to hotmail's smtp server? correct me if im wrong, but isnt all that requires for a mail to be sent a communication between TWO smtp servers, the senders and the receivers (in this case, hotmail)? and another question, why can't php just send the message directly to hotmail's smtp server, why does it have to go through a local smtp server? and why do you call it a smtp server when sendmail is just acting like a client to send a message and does not receive anything? would be great if someone could shed a light on this topic!

  Read the article

• Disable OS X Portable Home Directories for specific hosts for all users, not just individuals?

  - by Paul Nendick

  Would it be possible to block any and all Portable Home Directory services for specific hosts? Something like MCX's "MobileAccountNeverAsk-" but for the whole workstation? We have a network with both portable and stationary machines. I'd like our users to be able to use all machines, going portable on the MacBook but not being bothering with syncing when logged into stationary iMacs or Mac Pros. The Open Directory servers are running Snow Leopard (for now) and all clients are running Lion. Thanks! Paul

  Read the article

• Apache expands REQUEST_FILENAME with filetype

  - by Lauer

  I have a .htaccess fil on a Apache22 server. RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)$ /index.php?p=$1 [L] The idea is when the request is /testpage it should be rewritten to /index.php?p=testpage. The problem is that apache does a write before my file, so the actually request is testpage.xml which actually does exists. Therefore, the first RewriteCond is newer true, and my rewrite rule is never applied on the /testpage request. There server should be a standard setup on a FreeBSD server. I know this work on other servers.

  Read the article

• Is Zabbix the right tool for me?

  - by hortitude

  I just want to monitor a small handful of servers (less than 10). From reading various places it sounds like the top leading contenders (for open source at least) are: nagios munin zabbix From what I have read a lot of people tend to use munin and nagios together -- munin for history and graphs, and nagios for alerting. On the other hand it sounds like Zabbix is a more complete solution and easier to configure than either of the other two. So I was thinking of going that route. My thoughts right now are: What are the general disadvantages of Zabbix? Does Zabbix have a small footprint on boxes it is monitoring? Do I really need to setup an entire other server for it? I currently have a server that is under very light load -- can I dual purpose it?

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >