Search Results

Search found 74687 results on 2988 pages for 'work from home'.

Page 244/2988 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in? Update I found the following in the manual off ASUS's website, which confirms my original suspicion that HDMI and DVI can't be used at the same time. But I'd still like to know if it's possible through software to switch between using the HDMI and DVI.

  Read the article

• What differences should i make in the MPMoviePlayer sample code(for iphone) to make it work in Ipad?

  - by wolverine

  Its working perfectly in the iphone simulator. But not in the ipad simulator. I am only trying to make the movie getting loaded when the application launches.Copy pasted the same code in a ipad window application. But it loads and only gives the white screen and nothing is happening. Can anyone tell me what changes should I make to work it in ipad simulator just as in the iphone simulator?

  Read the article

• How do you get the VMWare vSphere client to work on Windows 7 RC?

  - by Keith Sirmons

  Howdy, When trying to connect to a ESXi server using the VMWare vShere Client I get an error: Error parsing the server "server" "clients.xml" file. Login will continue, contact your system administrator. Followed by: The type initializer for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception. Any clues to fix this? Windows 7 x64 RC Build 7100 vSphere client from ESXi 4.0.0 ReleaseBuild-171294 Thank you, Keith

  Read the article

• Why don't RSpec's methods, "get", "post", "put", "delete" work in a controller spec in a gem (or out

  - by ramon.tayag

  I'm not new to Rails or Rspec, but I'm new to making gems. When I test my controllers, the REST methods "get", "post", "put", "delete" give me an undefined method error. Below you'll find code, but if you prefer to see it in a pastie, click here. Thanks! Here's my spec_helper: $LOAD_PATH.unshift(File.dirname(__FILE__)) $LOAD_PATH.unshift(File.join(File.dirname(__FILE__), '..', 'lib')) require 'rubygems' require 'active_support' unless defined? ActiveSupport # Need this so that mattr_accessor will work in Subscriber module require 'active_record/acts/subscribable' require 'active_record/acts/subscriber' require 'action_view' require 'action_controller' # Since we'll be testing subscriptions controller #require 'action_controller/test_process' require 'spec' require 'spec/autorun' # Need active_support to user mattr_accessor in Subscriber module, and to set the following inflection ActiveSupport::Inflector.inflections do |inflect| inflect.irregular 'dorkus', 'dorkuses' end require 'active_record' # Since we'll be testing a User model which will be available in the app # Tell active record to load the subscribable files ActiveRecord::Base.send(:include, ActiveRecord::Acts::Subscribable) ActiveRecord::Base.send(:include, ActiveRecord::Acts::Subscriber) require 'app/models/user' # The user model we expect in the application require 'app/models/person' require 'app/models/subscription' require 'app/models/dorkus' require 'app/controllers/subscriptions_controller' # The controller we're testing #... more but I think irrelevant My subscriptions_spec: require File.expand_path(File.dirname(__FILE__) + '/../spec_helper') describe SubscriptionsController, "on GET index" do load_schema describe ", when only subscribable params are passed" do it "should list all the subscriptions of the subscribable object" end describe ", when only subscriber params are passed" do it "should list all the subscriptions of the subscriber" do u = User.create d1 = Dorkus.create d2 = Dorkus.create d1.subscribe! u d2.subscribe! u get :index, {:subscriber_type = "User", :subscriber_id = u.id} assigns[:subscriptions].should == u.subscriptions end end end My subscriptions controller: class SubscriptionsController The error: NoMethodError in 'SubscriptionsController on GET index , when only subscriber params are passed should list all the subscriptions of the subscriber' undefined method `get' for # /home/ramon/rails/acts_as_subscribable/spec/controllers/subscriptions_controller_spec.rb:21:

  Read the article

• How is the "change password at next logon" requirement supposed to work with RDP using Network Level Authentication?

  - by NReilingh

  We have a Windows server (2008 R2) with the "Remote Desktop Services" feature installed and no Active Directory domain. Remote desktop is set up to "Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure)". This means that before the remote screen is displayed, the connection is authenticated in a "Windows Security: Enter your credentials" window. The only two role services installed on this server is the RD Session Host and Licensing. When the "User must change password at next logon" checkbox is selected in the properties for a local user on this server, the following displays on a client computer after attempting to connect using the credentials that were last valid: On some other servers using RDP for admin access (but without the Remote Desktop Services role installed), the behavior is different -- the session begins and the user is given a change password prompt on the remote screen. What do I need to do to replicate this behavior on the Remote Desktop Services server?

  Read the article

• How does enterprise failover, such as with google.com, actually work?

  - by Alex Regan

  We have a few fedora systems that are configured for web, FTP, and email services. We'd like to mirror these services, so that we can provide near 100% reliability for our users. I'm a fairly experienced Linux administrator, but don't have much experience with redundant systems. What is the best way to do this? How does google and amazon do it? Google.com resolves to multiple IP addresses, but if my local desktop caches one of the IPs that are unreachable, I'm going to get a failed connection message. How do they prevent that from happening? If one of their servers goes down, how is it automatically redirected to another system, without the end-user ever knowing it? I understand there are failover devices, but they're only for failing over the system itself, not a complete network. Let's say we have the worst-case scenario, such as my primary system becomes inaccessible. What are the fundamental components that are used on Linux systems to provide this capability? I'm looking for concepts, or approaches, not answers like "check out openstack". What are the actual pieces that make up the solution? What has to be done to implement this capability? Hopefully my question is clear. I'd like to know what the pieces are that make up a failover system and what approach is taken by successful organizations that implement it. Thanks again, Alex

  Read the article

• DD-WRT PPTP VPN problem

  - by Tobias Tromm

  I try to configure a DD-WRT as a PPTP client. The VPN Server is Windows Server 2003. This is my scenario: The Windows 2003 Server has set to give to the VPN Client the 10.0.0.81 fixed IP and to add a network route to the remote home. At the remote home I have changed the PPTP Options at DD-WRT to make the connection. The VPN connection is successfully established. ...and Windows successfully add the route to the remote home 192.168.2.X. From the remote home I can successfully access any computer from the VPN server side. The problem is when I try to access the remote home from the Server side. From Server side I only can access\ping DD-WRT ( by VPN Client IP - 10.0.0.81). What's wrong? How I need to do to be a site-to-site VPN? This is what happen when I try to tracert the remote home from local home.

  Read the article

• Making Apache 2.2 on SuSE Linux Case In-Sensitive. Which is a better approach?

  - by pingu

  Problem: http://<server>/home/APPLE.html http://<server>/hoME/APPLE.html http://<server>/HOME/aPPLE.html http://<server>/hoME/aPPLE.html All the above should pick this http://<server>/home/apple.html I implemented 2 solutions and both are working fine. Not sure which one is better(performance). Please Suggest..Also Directive - CheckCaseOnly on never worked Option 1: a)Enable:mod_speling In /etc/sysconfig/apache2 - APACHE_MODULES="rewrite speling apparmor......" b) Add directive - CheckSpelling on (Either in .htaccess or add in httpd.conf) In httpd.conf <Directory srv/www/htdcos/home> Order allow,deny CheckSpelling on Allow from all </Directory> or In .htaccess inside /srv/www/htdcos/home(your content folder) CheckSpelling on Option 2: a) Enable: mod_rewrite b) Write the rule vhost(you can not write RewriteMap in directory. check apache docs ) <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> This changes the entire request uri into lowercase. I want this to happen for specific folder, but RewriteMap doesn't work in .htaccess. I am novice in regex and Rewrite. I need a RewriteCond which checks only /css//. can any body help

  Read the article

• debian squeeze: where do the logs for sysv init scripts go? (why won't my init script work)

  - by sbeam

  my actual problem is trying to debug a init script to start Resque. It works fine run as root from the command line, but does nothing on boot. It has some proper insserv headers and I've run updaterc.d to create the symlinks, and checked that they exist. The script is +x. # find /etc/rc*.d -name \*resque\* /etc/rc0.d/K01resque /etc/rc1.d/K01resque /etc/rc2.d/S01resque /etc/rc3.d/S01resque /etc/rc4.d/S01resque /etc/rc5.d/S01resque /etc/rc6.d/K01resque # ls -l /etc/init.d/resque -rwxr-xr-x 1 root root 2093 Oct 24 03:02 /etc/init.d/resque the script can be viewed here if you like. It uses lsb functions to log messages, which essentially echo() to STDOUT I believe. So where does the output go during startup? It's not in /var/log/*log

  Read the article

• Is it possible to get MbUnit to work with Visual Studio 2010 and a .NET 4, x64 build?

  - by Thomas Bratt

  Is it possible to get MbUnit to work with Visual Studio 2010 and a .NET 4, x64 build? I get the following error with Visual Studio 2010 and .NET 4 and Icarus (and similar errors with TeamCity). The tests worked fine with Visual Studio 2008. Gallio.Host.exe - .NET Framework Initialization Error Unable to find a version of the runtime to run this application. I have had the error with both the latest released version and the latest development build: GallioBundle-3.2.430.0-Setup-x64.msi

  Read the article

• Django Admin Page missing CSS

  - by super9

  I saw this question and recommendation from Django Projects here but still can't get this to work. My Django Admin pages are not displaying the CSS at all. This is my current configuration. settings.py ADMIN_MEDIA_PREFIX = '/media/admin/' httpd.conf <VirtualHost *:80> DocumentRoot /home/django/sgel ServerName ec2-***-**-***-***.ap-**********-1.compute.amazonaws.com ErrorLog /home/django/sgel/logs/apache_error.log CustomLog /home/django/sgel/logs/apache_access.log combined WSGIScriptAlias / /home/django/sgel/apache/django.wsgi <Directory /home/django/sgel/media> Order deny,allow Allow from all </Directory> <Directory /home/django/sgel/apache> Order deny,allow Allow from all </Directory> LogLevel warn Alias /media/ /home/django/sgel/media/ </VirtualHost> <VirtualHost *:80> ServerName sgel.com Redirect permanent / http://www.sgel.com/ </VirtualHost> In addition, I also ran the following to create (I think) the symbolic link ln -s /home/djangotest/sgel/media/admin/ /usr/lib/python2.6/site-packages/django/contrib/admin/media/ UPDATE In my httpd.conf file, User django Group django When I run ls -l in my /media directory drwxr-xr-x 2 root root 4096 Apr 4 11:03 admin -rw-r--r-- 1 root root 9 Apr 8 09:02 test.txt Should that root user be django instead? UPDATE 2 When I enter ls -la in my /media/admin folder total 12 drwxr-xr-x 2 root root 4096 Apr 13 03:33 . drwxr-xr-x 3 root root 4096 Apr 8 09:02 .. lrwxrwxrwx 1 root root 60 Apr 13 03:33 media -> /usr/lib/python2.6/site-packages/django/contrib/admin/media/ The thing is, when I navigate to /usr/lib/python2.6/site-packages/django/contrib/admin/media/, the folder was empty. So I copied the CSS, IMG and JS folders from my Django installation into /usr/lib/python2.6/site-packages/django/contrib/admin/media/ and it still didn't work

  Read the article

• Compiling cpp code in netbeans produce errors, how to solve it ?

  - by Rupertt Wind

  i use the netbeans with MinGW and MYSY make /debugger but when i compile a basic cpp code in it and run it it produces two erorrs this is the code runned and the output![alt text][1] box #include <iostream> void main() { cout << "Hello World!" << endl; cout << "Welcome to C++ Programming" << endl; } output is /usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf make[1]: Entering directory `/d/Users/Home/Documents/NetBeansProjects/newApp' /usr/bin/make -f nbproject/Makefile-Debug.mk dist/Debug/MinGW-Windows/newapp.exe make[2]: Entering directory `/d/Users/Home/Documents/NetBeansProjects/newApp' mkdir -p dist/Debug/MinGW-Windows g++.exe -o dist/Debug/MinGW-Windows/newapp build/Debug/MinGW-Windows/newmain.o build/Debug/MinGW-Windows/newfile.o build/Debug/MinGW-Windows/main.o build/Debug/MinGW-Windows/newfile.o: In function `main': D:/Users/Home/Documents/NetBeansProjects/newApp/newfile.cpp:5: multiple definition of `main' build/Debug/MinGW-Windows/newmain.o:D:/Users/Home/Documents/NetBeansProjects/newApp/newmain.c:15: first defined here build/Debug/MinGW-Windows/main.o: In function `main': D:/Users/Home/Documents/NetBeansProjects/newApp/main.cpp:13: multiple definition of `main' build/Debug/MinGW-Windows/newmain.o:D:/Users/Home/Documents/NetBeansProjects/newApp/newmain.c:15: first defined here collect2: ld returned 1 exit status make[2]: *** [dist/Debug/MinGW-Windows/newapp.exe] Error 1 make[2]: Leaving directory `/d/Users/Home/Documents/NetBeansProjects/newApp' make[1]: *** [.build-conf] Error 2 make[1]: Leaving directory `/d/Users/Home/Documents/NetBeansProjects/newApp' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1s) how can i solve this ?

  Read the article

• configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

  - by Wayne

  vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

  Read the article

• How does the EFI partition work and can I boot an x86 OS with a bootx64.efi file?

  - by Ian

  I have a Thinkpad X230 laptop and I want to install Linux Mint Debian Edition along side Windows 7 on my GPT formatted SSD with the BIOS in UEFI mode. The problem is that I don't understand how EFI booting works. There seems to be an EFI partition involved with some folders and binary files in it. GRUB 2 seems to be able to make more folders in it (I followed this guide http://www.thinkwiki.org/wiki/UEFI_Firmware), but it appears that the only file that does anything is the bootx64.efi file in the /efi/boot folder of the EFI partition (I am not sure if this is always the case, but it appears to be the case for my laptop http://www.thinkwiki.org/wiki/Category:X220). Here is what I have been able to do: I can install Linux Mint Debian Edition x86 with the BIOS in BIOS mode on my SSD. I can then install grub-efi and follow the guide linked above. The problem is that I don't get a GRUB prompt when I switch the BIOS to UEFI mode. It just boots Windows. It appears that I can either boot from the SSD or something called "Windows Boot Manager". If I replace the bootx64.efi with the file created by GRUB, I can no longer boot directly from the SSD. Booting from "Windows Boot Manager" still works fine. I realize that the guide says to use x64 Linux, but Linux Mint Debian Edition x64 hangs during the install process. I am really confused. What should I do? Can anyone explain how the EFI boot partition works? Can a bootx64.efi boot an x86 OS? Should I just give up with using UEFI? I haven't been able to find very much useful information about using Debian based operating systems with UEFI. Thanks, Ian

  Read the article

• How do .net 4.0 [named] tuples work under the hood?

  - by Hamish Grubijan

  I suspect that there is a lot of work done at low level. when names are used for tuple elements, do auto-properties get created? Thanks.

  Read the article

• How can I password protect & let cgi-bin to work?

  - by jaaaaaaax

  This is taken from sites-available directory. It's a virtual host setting for apache. Accessing myiphere/cgi-bin/ throws 403. The directory setting for /var/www2/ drwxrwxrwx 8 www-data www-data NameVirtualHost myiphere <VirtualHost myiphere> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory>

  Read the article

• How Does Failover Clustering Work in Windows 2008 R2?

  - by Kyle Brandt

  I am trying to learn how the failover clustering features works with Windows 2008 R2 as I am going to be using as part of SQL Server 2012 always on. I have been able to find information on how to set it up, and what it does. However, I am having trouble finding a nice technical document on how it actually works in detail (For example with keepalived there are docs that explain how often are heartbeat packets sent, what they look like etc). I know this is a pretty broad question, but I would like to have a good understanding of mechanisms of this feature.

  Read the article

• ASP.NET MVC2 - Does Html.EditorForModel() work on the nested data model?

  - by warmcold

  My test shows it doesn't work. It ignores the nested data in model. Can anyone confirm this?

  Read the article

• How to get httrack to work with SSL on mac os x? (libssl.so not found)

  - by cwd

  I'm trying to use httrack website copier but the program is running and reporting "no-ssl" (ie: it does not have the capability to copy secure sites). From looking over this thread, it seems that the problem is either when I make & configure the program, or when I run the program, it is not finding the lib-ssl / open-ssl that I have installed. I think it is looking for /var/root/lib/libssl.so.1.0 The user on that forum states that he created a symlink which allowed httrack to find the ssl library in the non-default location. Perhaps that's what I need to do - but where do I create the link from and to? I'm not seeing that I have any libssl.so files installed on my system. Do I need the development package? If so, how do I install that? I used macports to install the current version of openssl that I have. I'm running OS X 10.6. Reserch I have run this command to try and debug: dtruss httrack 2&1 | grep ssl and that outputs this: stat64("libssl.so.1.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.1\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.1.0.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8p\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8o\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8n\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8m\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8l\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8k\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8j\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8g\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8b\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.7\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.6\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 I have already used mac ports to install open-ssl: port installed The following ports are currently installed: beecrypt @4.2.1_2 (active) cpio @2.10_0 (active) expat @2.0.1_1 (active) flex @2.5.35_0 (active) gettext @0.18.1.1_2 (active) gperf @3.0.4_0 (active) icu @4.6_0 (active) libiconv @1.13.1_0 (active) mysql5 @5.1.53_0 (active) ncurses @5.9_0 (active) ncursesw @5.8_0 (active) neon @0.29.5_0 (active) openssl @1.0.0c_0 (active) perl5.8 @5.8.9_3 (active) popt @1.16_0 (active) python24 @2.4.6_7 (active) readline @6.1.002_0 (active) rpm @4.4.9_10 (active) sqlite3 @3.7.3_0 (active) zlib @1.2.5_0 (active) Here are the install locations: locate libssl /opt/local/lib/libssl.1.0.0.dylib /opt/local/lib/libssl.a /opt/local/lib/libssl.dylib /opt/local/lib/pkgconfig/libssl.pc /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.1.0.0.dylib /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.a /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.dylib /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/pkgconfig/libssl.pc /usr/lib/libssl.0.9.7.dylib /usr/lib/libssl.0.9.8.dylib /usr/lib/libssl.0.9.dylib /usr/lib/libssl.dylib /usr/lib/pkgconfig/libssl.pc What should I do next? More Info I tried the solution below: $ DYLD_INSERT_LIBRARIES="/opt/local/lib/libssl.1.0.0.dylib" httrack Welcome to HTTrack Website Copier (Offline Browser) 3.44-1-nossl Copyright (C) Xavier Roche and other contributors To see the option list, enter a blank line or try httrack --help It is still not able to load the ssl lib: 3.44-1-nossl

  Read the article

• osx 10.6.3 how does apache config work?

  - by w-

  hi, just got a macbook pro 15" so i'm unfamiliar with how the filesystem is laid out. i noticed when in my filesystem that i've got a few paths specifying httpd.conf /etc/apache2/httpd.conf /opt/local/apache2/conf/httpd.conf /private/etc/apache2/httpd.conf the confs are different in lots of ways-- e.g. user, group, server_root, modules that are loaded, etc. the apache2 folders themselves also greatly differ. it seems that the one getting used is either /etc/apache2/httpd.conf or /private/etc/apache2/httpd.conf i'm wondering if i might have messed up my system after installing some packages (php5, django, etc) via macports and maybe ended up with 2 apache2 instances. my questions are hence: - which httpd.conf is the one being used ? - what are the other files for? thanks

  Read the article

• Mac OS X 10.6.3: how does Apache config work?

  - by w-

  Just got a MacBook Pro 15" so I'm unfamiliar with how the filesystem is laid out. I noticed when in my filesystem that I've got a few paths specifying httpd.conf: /etc/apache2/httpd.conf /opt/local/apache2/conf/httpd.conf /private/etc/apache2/httpd.conf The config files are different in lots of ways (user, group, server_root, modules that are loaded, etc.) The apache2 folders themselves also greatly differ. It seems that the one getting used is either /etc/apache2/httpd.conf or /private/etc/apache2/httpd.conf I'm wondering if I might have messed up my system after installing some packages (php5, django, etc) via macports and maybe ended up with 2 apache2 instances. My questions are hence: which httpd.conf is the one being used ? what are the other files for? thanks --update-- To clarify, I didn't explicitly install apache2 via macports. I'm wondering if it was installed because it was a dependency. After more hunting around I'm learning I never should've installed php to begin with because Snow Leopard already includes php 5.3 from the get go. http://serverfault.com/questions/82410/apache-2-and-php-5-3-via-macports I'll need to open another question that asks about how the Mac filesystem works. Thanks all for replies.

  Read the article

• Why does PSEXEC work if I don't specify a password?

  - by Kev

  When I run PSEXEC to launch a process on a remote machine, if I specify the password in the command line it fails with: PsExec could not start cmd.exe on web1928: Logon failure: unknown user name or bad password. psexec \\web1928 -u remoteexec -p mypassword "cmd.exe" If I just specify: psexec \\web1928 -u remoteexec "cmd.exe" and type in the password it works just fine. The originating server is Windows 2003 and the remote server is Windows 2008 SP2.

  Read the article

• is there software that can fill in forms on the Internet, automatically and if so, what kind of server would work best [closed]

  - by Stevew51

  Possible Duplicate: Firefox Form Fill Add On I have been looking to get into that fill in forms for cash type job/business. I have been searching for software that can do the job automatically. I guess some sort of copy and paste I have been told that there is software for everything. I need software that can fill in forms on the Internet automatically. And if so, what kind of server works best. Not what brand what kind of server.I am not sure if you understand what I am looking for. I am looking for software they can take information from a business site and automatically place it in a form on that same site.I am not asking, what brand I should buy, what kind of server is it.

  Read the article

• Does Apple Magic Mouse fully work on Windows 7 x86/x64?

  - by Sorin Sbarnea

  I would like to know if Apple Magic Mouse works on Windows 7 (x86/x64) on non-Apple computers. Here are some checklists: x64 compatibility left click right click middle button? vertical scroll horizontal scroll bind additional gestures to keystrokes? are any usage problems? In case it works please advise on how to get the drivers.

  Read the article

• how do i write an init script for django-supervisor

  - by amateur

  pardon me as this is my first time attempting to write a init script for centos 5. I am using django + supervisor to manage my celery workers, scheduler. Now, this is my naive simple attempt /etc/init.d/supervisor #!/bin/sh # # /etc/rc.d/init.d/supervisord # # Supervisor is a client/server system that # allows its users to monitor and control a # number of processes on UNIX-like operating # systems. # # chkconfig: - 64 36 # description: Supervisor Server # processname: supervisord # Source init functions /home/foo/virtualenv/property_env/bin/python /home/foo/bar/manage.py supervisor --daemonize inside my supervisor.conf: [program:celerybeat] command=/home/property/virtualenv/property_env/bin/python manage.py celerybeat --loglevel=INFO --logfile=/home/property/property_buyer/logfiles/celerybeat.log [program:celeryd] command=/home/foo/virtualenv/property_env/bin/python manage.py celeryd --loglevel=DEBUG --logfile=/home/foo/bar/logfiles/celeryd.log --concurrency=1 -E [program:celerycam] command=/home/foo/virtualenv/property_env/bin/python manage.py celerycam I couldn't get it to work. 2013-08-06 00:21:03,108 INFO exited: celerybeat (exit status 2; not expected) 2013-08-06 00:21:06,114 INFO spawned: 'celeryd' with pid 11772 2013-08-06 00:21:06,116 INFO spawned: 'celerycam' with pid 11773 2013-08-06 00:21:06,119 INFO spawned: 'celerybeat' with pid 11774 2013-08-06 00:21:06,146 INFO exited: celerycam (exit status 2; not expected) 2013-08-06 00:21:06,147 INFO gave up: celerycam entered FATAL state, too many start retries too quickly 2013-08-06 00:21:06,147 INFO exited: celeryd (exit status 2; not expected) 2013-08-06 00:21:06,152 INFO gave up: celeryd entered FATAL state, too many start retries too quickly 2013-08-06 00:21:06,152 INFO exited: celerybeat (exit status 2; not expected) 2013-08-06 00:21:07,153 INFO gave up: celerybeat entered FATAL state, too many start retries too quickly I believe it is the init script, but please help me understand what is wrong.

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >