Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 245/607 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

• LUKS-Encrypted Root Partition in Ubuntu 9.04

  - by Martindale

  I have a LUKS-encrypted root partition that I have installed Ubuntu 9.04 to. I have of course placed /boot on a separate ext2 partition, and my boot loader loads and functions correctly. However, I can't seem to get my initrd to load the LUKS-encrypted root using the appropriate /dev/mapper/ address. What hooks and scripts do I need to add to get this to function correctly, and what is the correct way to regenerate my initrd? I can CHROOT into this install, and everything works fine - but I just can't seem to get it to actually boot. Help!

  Read the article

• SATA controller installed but not working? (No drives show up/Don't see card's BIOS)

  - by johnnycakes

  Hi, I have an old Promise FastTrak S150 TX4 SATA controller card. I put it in an old machine running Windows Server 2003. I booted the machine. The new hardware was detected. I installed the drivers. So now in Device Manager under "SCSI and RAID Controllers" I see "Win Server 2003 Promise FastTrak S150 TX4 Controller" and "Win Server 2003 Promise RAID Console SCSI Processor Device" I previously had the card in a machine that is now dead. When I booted that machine, during the boot process I would see the card info displayed and the drives that were attached. Boot would finish and my drives would be available. When I boot this new machine I never see that screen/text. No hard drives are available/visible. What am I missing? Thanks.

  Read the article

• My pendrive is not working and showing Unknown file System

  - by Debabratta

  I have a pendrive when I insert it into one o my port it shows in the My Computer but when I try to explore, it shows please insert a disk into drive H. However my usb drive is well inserted. I tried to format it but it is showing There is no disk in drive H, Insert a disk then try again. Its properties is showing Unknown File System and the used space and free space part showing 0 bytes. I cann't also check for errors in the drive. Its device status:The device is working properly. I also reinstalled the driver but that did not help me. Please suggest some way to recover the issue. Thanks.

  Read the article

• Windows command line ZIP extraction with checksum or similar ?

  - by Alan B

  What I need to do, at the command line, is: Extract the contents of a a ZIP archive. Change an arbitrary number of the extracted files. Repeat step 1, but because it is a huge archive, only extract the archived copies of the files changed in step 2 which is much faster. Ideally the extraction in step 3 would do something like a checksum on the files on disk and only extract those where the file in the archive has a different checksum. Or maybe compare the date changed stamp on the disk file. At the minute I use pkzipc.exe which is the command-line version of PkZip. I can't see a way to do it with this though. You can extract files from the archive that are newer than the disk files, but what I want is the opposite of that in a sense.

  Read the article

• Having problems with Grub2 booting Ubuntu from my External Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. what do i do? i did some reading and traced the source of the problem to grub2. Apparently, grub2 doesn't use the device's UUID, and uses the linux directory instead (/dev/sdf2). This means that whenever i plug my E-HDD into a system that has a different number of drives connected to it, i won't be able to boot without editting the boot command. I don't understand it too well but that's what i got from what i read. Is there anyway to fix this?

  Read the article

• Can I install Windows OS (Windows 7) on a removable USB hard drive?

  - by Hemant

  I wanted to take a sneak peak at Windows 7 so I thought of installing it. I have Windows Vista on my laptop which came pre-installed with it. I didnt want to mess with it. So I created a partition (20 GB) in my USB external hard disk and tried to install Windows 7 on that partition. But when I booted from Windows 7 DVD and selected the target partition on USB hard disk, it said it cannot be installed. Is there any way to install windows on external USB hard disk?

  Read the article

• How do I remove Windows Update uninstall files on Windows Server 2008?

  - by Robert Koritnik

  I'm running Windows Server 2008 Standard running in VMware. It has 2 disks: system disk: 16 GB data disk: 500 MB I installed Visual Studio 2008 SP1 + MSDN and some small tools and libraries that don't take much space. Over time the system disk's free space has been going down (I suspect because of regular system updates - NetFx (.NET), service packs, and regular updates). Questions 1 How do you remove Windows Update uninstall files from Windows Server 2008? Question 2 I also found lots of files in C:/Windows/Installer folder. Is it possible to determine which .msp file goes with which patch? I would like to delete some of them, because they do take a lot of space.

  Read the article

• Best idea dataserver serving small pictures 40 ko

  - by Nicolas Manzini

  I'm designing the server structure for my application in case things go well. I have one server DB connected to multiple server who process connections. All those with lots of RAM and fast processors. (still looking for a way to use the multithread because now it's dumb apache php... so loooots of ram needed). Upon an answer from those servers, the client can then connect to another server to retrieve pictures using the address he previously got from the db. Is it a good idea to have one database server with let's say nginx and ssd disk having to send all pictures to everybody? or should I have multiple server accessing to a shared ssd disk drive or multiple disk updating each other? Also should I put a lot of RAM on the database server? because probably there wont be a picture more popular than another.

  Read the article

• Booting from hard drive fails after installing Centos from USB Stick

  - by Rick

  I created a Centos Live 5.4 Bootable USB drive. I used this to install Centos on a HP Netbook. When the system goes to write the Grub boot loader to disk, it wants to write the boot loader to the usb drive (/dev/sda), not the hard disk (/dev/hda). I do have the option of writing the boot loader to /dev/hda, (not to the mbr!) but when I reboot I get an load error and the Grub prompt. How can I get Centos booting from the hard disk instead of using the USB key.

  Read the article

• OpenVZ kernel panic

  - by GtoXic

  I recently installed OpenVZ on my VMWare box (To do some testing) and I get the following: https://www.dropbox.com/s/p38btkv5j84bvsh/Capture.JPG the GRUB config is as follows: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title OpenVZ (2.6.32-042stab057.1) root (hd0,0) kernel /vmlinuz-2.6.32-042stab057.1 ro root=/dev/VolGroup00/LogVol00 sysfs.deprecated=1 initrd /initrd-2.6.32-042stab057.1.img title CentOS (2.6.18-238.el5) root (hd0,0) kernel /vmlinuz-2.6.18-238.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-238.el5.img

  Read the article

• Windows Home Server is showing signs of death

  - by Guy

  I have a Windows Home Server (HP EX485 MediaSmart Home Server) and it started acting up about 4 weeks ago and a few days ago complained of a corrupt database and would I like to try and recover it? Yes, I would but I ended up losing all backups. I have to reboot it frequently for the client machines to be able to see it. I have 4 hard disks in the computer. I suspect that the primary hard disk is going bad. My first question: How can I confirm if it's going bad or not? I'm thinking about removing the primary disk and replacing it with one of the others and reloading the OS with the server restore disk. I know that I'll lose everything (but I recently did anyway) but is there any other reason why I should not do this?

  Read the article

• Repartition hard drive using Mac OS X, keep existing data

  - by Jonny

  I got a 1 TB disk a year or so ago and loaded it with some hundred of GB of data. I somehow neglected to check the file system, which turns out to be FAT-32 and thus too small for files bigger than 4 GB. So now I want to change it, without deleting the data. I thought I'd just make a new partition in the so far unused space. Then with the new partition, copy/move the data into the new partition, and then delete the old FAT-32 partition, and make the new partition bigger again... or just make a few more partitions. The critical step here is, can I make that new partition without ruining the data? The data should be fairly sequentially added to the start of the disk, but what do I know... so that's why I'm asking. Can I safely use Disk Utility for this? Any recommended file system?

  Read the article

• Resizing partition in VMware Fusion didn't work

  - by Robot

  I migrated a Parallels VM to VMware Fusion. That worked well, although the original partition size was way too small (8GB). Following some instructions from VMware, I used the Fusion GUI to extend the size of the disk to 20GB, and then I booted from a GPartEd LiveCD to grow the C: partition to the full 20GB. That seemed to work, and I can see that the disk is 20GB in Disk Manager, but it still thinks the actual partition is 8GB. Here is a screenshot of it. What can I do to get the entire 20GB usable?

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

  Read the article

• Proper way to connect SATA and IDE Hard drives together?

  - by Bartek

  I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

• How to force Windows to call the partition it installs on C:?

  - by maaartinus

  I'm going to install Windows XP from a CD and want to make sure it calls the partition it lands on C:. The target partition is the first one on a SATA disk, which is not the first one in my computer. There's no IDE disk there. I don't think I can swap the disks, as I'm using a fake RAID and really don't want to get problems with it. The target partition is on a normal disk. I know it may be unimportant, but I don't want to run in any problems I can avoid. I've seen a question slightly related to it, but I'm not going to install from a USB.

  Read the article

• Full/Differential backup - what's used to determine the differential backup content?

  - by gernblandston

  Let's say I have a 'MyDB' SQL Server 2005 database (simple recovery) in which I do a Full backup on Sunday, and Differentials every other night BACKUP DATABASE [MyDB] TO DISK = N'c:\Database Backups\MyDB\MyDB_Full.bak' WITH NOFORMAT, INIT, NAME = N'MyDB.BAK', SKIP, NOREWIND, NOUNLOAD, STATS = 10 and BACKUP DATABASE [MyDB] TO DISK = N'c:\Database Backups\MyDB\MyDB_Diff.bak' WITH NOINIT, DIFFERENTIAL, NAME= 'MyDB.BAK', STATS= 10 What does the differential backup process use to decide what data gets backed up on the differential nights? Does it need the mydb_full.bak file to do its business? If I wanted to save disk space, could I zip up the mydb_full.bak file to a .zip file after it's created without adversely affecting the differential backups, and if I needed to restore, just unzip the full backup before starting?

  Read the article

• Renaming an Invalid Filename in NTFS

  - by Sadeq Dousti

  Recently, I loaned my flash disk to one of my friends, who had Mac OS. He copied a file on it, whose name included a backslash (\). The flash disk is NTFS formatted. Windows does not allow such filenames, and neither opens the file, nor deletes it, nor lets me delete the file. There are naive approaches to this problem, like: Formatting the flash disk; Giving it back to my friend and asking to rename it; Loading into some live Linux and renaming it. However, I'm looking for something more clever, like a program that can do the trick under Windows. PS: There's a tool called NTFSWalker which can browse the MFT records of the NTFS, but is unable to make any changes to them.

  Read the article

• How to Extending a logical volume in WMWare

  - by Mercer

  down vote favorite i have a CentOS 6.3 into my Virtual Machine. I have 2 Disk: Disk#1 = 18G Disk#2 = 20G [root@vm ~]# df -h Filesystem Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_system-lv_root 1008M 250M 708M 27% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 31M 154M 17% /boot /dev/mapper/vg_system-lv_home 504M 17M 462M 4% /home /dev/mapper/vg_system-lv_opt 2.0G 68M 1.9G 4% /opt /dev/mapper/vg_produits-lv_grid 6.9G 2.5G 4.1G 38% /opt/grid /dev/mapper/vg_produits-lv_oracle 6.9G 144M 6.4G 3% /opt/oracle /dev/mapper/vg_system-lv_tmp 2.8G 71M 2.6G 3% /tmp /dev/mapper/vg_system-lv_usr 2.5G 1.6G 799M 67% /usr /dev/mapper/vg_system-lv_var 2.0G 278M 1.6G 15% /var So i want to extend my /tmp and my /opt/oracle like this: 10Go in/tmp 13Go in /opt/oracle Thx.

  Read the article

• How can I change the amount and size of Linux ramdisks (/dev/ram0 - /dev/ram15)?

  - by Kevin S.

  Using Linux, when I boot I automatically have 16 16MB ramdisks, however, I would like to create one really large ramdisk to test some software. I found that I can adjust the size of the ramdisks already on the system with the kernel boot parameter ramdisk_size however, this makes all 16 ramdisks (/dev/ram0 - /dev/ram15) the size that is specified. So if I want to create a 1GB ramdisk, I would need 16GB of memory. Basically, I want to create one 10GB ramdisk which would be /dev/ram0. How would I go about doing that? I assume there is a kernel boot parameter, but I just haven't found it.

  Read the article

• GRUB2 not detecting OS on raid partitions

  - by sleeves

  I have recently added a drive to a system and have successfully raid'ed (RAID-1) the paritions, with the exception of the boot partition. I have it ready and mirrored, but can't get GRUB2 (update-grub) to find it. System: Ubuntu 11.04 Raid Metadata: 1.2 If I run update-grub, it finds the kernel images on the /dev/sda2 partition (present root) but not the images on /dev/md127. /dev/md127 is composed of "missing" and "/dev/sdb2". fdisk on /dev/sdb confirms that sdb2 is of type fd (raid autodetect) and is also flagged bootable. I have two things I want to do. Make the boot.cfg on /dev/sdb2 have a menu option to have the root be /dev/md127 Install grub onto /dev/md127 so the actual boot.cfg from there is being used. Thanks!

  Read the article

• Mimicking Google's Persistent Disks -- Is this a logical FreeBSD disaster recovery strategy?

  - by Casey Jordan

  I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistent disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

  Read the article

• not able to make entry of ubuntu 10.04 grub.cfg into redhat 5.1 menu.lst file to run 2 linux os and

  - by Deepak Narwal

  Hello friend... In my computer there are three operating systems.. First i installed Windows 7 then i installed ubuntu 10.04 and in last i installed redhat 5.1 NOw i know one thing as i installed redhat then grub installed by ubuntu will be overwritten by redhat grub..and i know that to see all three operating syetm at the startup i have to make entry of /boot/grub/cfg into /boot/grub/menu.lst file.. Now the problem is like this In te previous version it was very easy to play with ubuntu grub file but now this file is modified..NOw i dont know what is to be picked up from ubuntu /grub/grub.cfg file so that i can make entry in redhat /boot/grub/menu.lst file.. In short i am not able to put entry of grub.cfg file into redhat menu.lst file.. will u help me plz i want to work on these thre eOS..

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >