Search Results

Search found 8030 results on 322 pages for 'ie'.

Page 245/322 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

  • How do I prevent ISPs from killing downloads of files in mid-transfer?

    - by Gorchestopher H
    I run a small website with a few users, low traffic, mostly to share personal mp3 files with a small community. Depending on their ISP, my users can't always download or stream larger files. By larger I mean larger than 1MB. Essentially the host either stops sending, or the client stops receiving. One of the links along the connection chain simply ends its connection before the transfer completes Trace-route shows no connection issues. There are no connection issues with short transfers that don't take more than a few seconds. It's these 10 second transfers that just end up ending. Just doing a straight download with a direct link can yield this error if you have the wrong ISP. Strangely enough, this is most common with users with ISPs who are essentially independent providers that buy service via a fiber link. Unfortunately these providers aren't very knowledgeable, are unable to do any testing, and insist it's a problem with the host. I have gotten my host to transfer my site to different servers of their, to the same effect. Nearly identical sites (affiliate sites actually) experience no such issue. What can I be doing to further troubleshoot this matter? How can I prove that someone is dropping the ball, and identify who that party is? Can I do a 5Mb traceroute? EDIT Maybe I can clear up some misconceptions with my question: The files are not very large. They are simply over 2Mb. The users do not have "slow" connections, they are at least 5mbps. This "time out" happens very quickly, in the realm of 5 seconds, so I don't know if it's a timeout or not. The user often gets 1 or 2Mb in this chunk of time. I have tried streaming with a flash player. I have tried saving the target. Forcing the download. I have tried allowing the browser to stream the file. I have tried different browsers (FF, IE, Chrome). Users are able to download identical files when on different hosts.

    Read the article

  • Best language on Linux to replace manual tasks that use SSH/Telnet? [on hold]

    - by Calab
    I've been tasked to create and maintain a web browser based interface to replace several of the manual tasks that we perform now. I currently have a "shakey" but working program written in Perl (2779 lines) that uses basic Expect coding, but it has some limitations that require a great deal of coding to get around. Because of this I am going to do a complete rewrite and want to do it "right" this time. My question is this... What would be the best language to use to create a web based interface to perform SSH/Telnet tasks that we would normally do manually? Keep in mind the following requirements: Runs on a CentOS Linux system v5.10 Http will be served by Apache2 This is an INTRANET site and only accessible within our organization. User load will be light. No more that 5 users accessing it at one time. perl 5.8.8, php 5.3.3, python 2.7.2 are available... Not sure what other languages to check for, or what modules might be installed in each language. The web interface will need to provide progress indicators and text output produced by the remote connection, in real time as it is generated. If we are running our process on multiple hosts, they should be in individual threads so that they can run side by side, not sequentially. I want the ability to "trap" on specific text generated by the remote host and display an alert to the user - such as when the remote host generates an error message. I would like to avoid as much client side scripting (javascript/vbscript) as I can. Most users will be on Windows PC's using Chrome or IE as a browser. Users will be downloading the resulting output so they can process it as they see fit. I currently have no experience with "Ajax" or the like. Most of my coding experience is old 6809 assembly, Visual Basic 6, and whatever I can cut/paste from online examples in various languages (hence my "shaky" Perl program) My coding environment is Eclipse for remote code editing, but I prefer stuff like UltraEdit if I can get a decent syntax file for the language I'm using. I do have su access on the server, but I'm not the only one using this server so I can't just upgrade/install blindly as I might impact other software currently running on the machine. One reason that I'm asking here, instead of searching (which I did) is that most replies were, "use language 'xyz', but you need to use an external SSH connection" - like I'm using Expect in my Perl script. Most also did not agree on what language that 'xyz' should be. ...so, after this long posting, can someone offer some advice?

    Read the article

  • is a factory pattern to prevent multuple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquly define what the object is (what node, what edge etc), and the oens that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methdos, so these objects all act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approch which accepts a Builder object and construct the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquly defines the type of object (this is node A nto node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows it's state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overiding of serlization methods to make it work (ensure when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in it's place), as well as using a weakHashMap as if it was a weakHashSet to know rather an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to it's own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state taht is different then my memory; to tell my memory when it's own state is inconsistent. I believe this is possible despit their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect I'm posting).

    Read the article

  • database independent coding framework options?

    - by statirasystems
    Background: I have not programmed in a while besides doing VBA and a little VB.NET. So please forgive my language use. I'm green and have a head cold. I am reading all I can now, but I have no programming circles to draw from. The information I am providing is to help guide you to what I am looking for. I am not confident I can ask the question properly. Story: I have four different projects that I am starting. Obviously I won't be working on all at the same time however they each will have similar needs and be inter related. They are as follows: Desktop Environment/System User Interface - basically a product that runs on major computers via mono or .net that unifies the look and functions. In the context of the up coming question it would be able to directly access data of various types. It would work in tandum with my office suite, system manager, and network application framework. Office Suite - technically it would not be a suite since I will be doing it from one interfacel except for the Communications Application. As far as the question, it will need to be able to link to various data sources for storing files and using, manipulating, and presenting information. System Manager - an intellegent system to manage and administer the entire network and all equipment. As far as the question, needs to be able to access data for archiving and and for accessing it's own settings stored in various formats, sql or xml. Network Application Framework - A complete system that can be used for ERP, CRM, CMS, Errata, File Management, and so on. As to the question to be able to access it's own or interlink with existing applications. Requirement: C#, Simplifies and reduces coding, use the same code to access diffent databases(ie MySQL, MS SQL, ACCESS, XML, ...), Mono would be nice but not a must, Question: What librarys, frameworks, or other options would be able to help with this? Is there a good resource to guide me? I don't want arguing over what is best, just information to help me further understand and make an educated decision.

    Read the article

  • Position:absolute

    - by Andrew
    I have I have a div called logo. I want the logo to be on top of other areas and to overlap into the the preface top of a drupal site, the logo currently sits in the header area. I looked up position absolute and I think that what I need to use but when I use position absolute the logo disappears, I can see it if I use position fixed, relative etc. I thought the logo was being hidden because I was not using a z-index but even with that I cant see the logo. What am I doing wrong? #logo { position: absolute; top: 30px; /* 30 pixels from the top of the page */ left: 80px; /* 80 pixels from the left hand side */ z-index:1099; border: 1px solid red; /* So we can see what is happening */ } Also does anyone know of a really good free online css course? Here is some additional information, namely the CSS and the page.tpl.php: <?php // $Id: page.tpl.php,v 1.1.2.5 2010/04/08 07:02:59 sociotech Exp $ ?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="<?php print $language->language; ?>" xml:lang="<?php print $language->language; ?>"> <head> <title><?php print $head_title; ?></title> <?php print $head; ?> <?php print $styles; ?> <?php print $setting_styles; ?> <!--[if IE 8]> <?php print $ie8_styles; ?> <![endif]--> <!--[if IE 7]> <?php print $ie7_styles; ?> <![endif]--> <!--[if lte IE 6]> <?php print $ie6_styles; ?> <![endif]--> <?php print $local_styles; ?> <?php print $scripts; ?> </head> <body id="<?php print $body_id; ?>" class="<?php print $body_classes; ?>"> <div id="page" class="page"> <div id="page-inner" class="page-inner"> <div id="skip"> <a href="#main-content-area"><?php print t('Skip to Main Content Area'); ?></a> </div> <!-- header-top row: width = grid_width --> <?php print theme('grid_row', $header_top, 'header-top', 'full-width', $grid_width); ?> <!-- header-group row: width = grid_width --> <div id="header-group-wrapper" class="header-group-wrapper full-width"> <div id="header-group" class="header-group row <?php print $grid_width; ?>"> <div id="header-group-inner" class="header-group-inner inner clearfix"> <?php print theme('grid_block', theme('links', $secondary_links), 'secondary-menu'); ?> <?php print theme('grid_block', $search_box, 'search-box'); ?> <?php if ($logo || $site_name || $site_slogan): ?> <div id="header-site-info" class="header-site-info block"> <div id="header-site-info-inner" class="header-site-info-inner inner"> <?php if ($logo): ?> <div id="logo"> <a href="<?php print check_url($front_page); ?>" title="<?php print t('Home'); ?>"><img src="<?php print $logo; ?>" alt="<?php print t('Home'); ?>" /></a> </div> <?php endif; ?> <?php if ($site_name || $site_slogan): ?> <div id="site-name-wrapper" class="clearfix"> <?php if ($site_name): ?> <span id="site-name"><a href="<?php print check_url($front_page); ?>" title="<?php print t('Home'); ?>"><?php print $site_name; ?></a></span> <?php endif; ?> <?php if ($site_slogan): ?> <span id="slogan"><?php print $site_slogan; ?></span> <?php endif; ?> </div><!-- /site-name-wrapper --> <?php endif; ?> </div><!-- /header-site-info-inner --> </div><!-- /header-site-info --> <?php endif; ?> <?php print $header; ?> <?php print theme('grid_block', $primary_links_tree, 'primary-menu'); ?> </div><!-- /header-group-inner --> </div><!-- /header-group --> </div><!-- /header-group-wrapper --> <!-- preface-top row: width = grid_width --> <?php print theme('grid_row', $preface_top, 'preface-top', 'full-width', $grid_width); ?> <!-- main row: width = grid_width --> <div id="main-wrapper" class="main-wrapper full-width<?php if ($is_front) { print ' front'; } ?>"> <div id="main" class="main row <?php print $grid_width; ?>"> <div id="main-inner" class="main-inner inner clearfix"> <?php print theme('grid_row', $sidebar_first, 'sidebar-first', 'nested', $sidebar_first_width); ?> <!-- main group: width = grid_width - sidebar_first_width --> <div id="main-group" class="main-group row nested <?php print $main_group_width; ?>"> <div id="main-group-inner" class="main-group-inner inner"> <?php print theme('grid_row', $preface_bottom, 'preface-bottom', 'nested'); ?> <div id="main-content" class="main-content row nested"> <div id="main-content-inner" class="main-content-inner inner"> <!-- content group: width = grid_width - (sidebar_first_width + sidebar_last_width) --> <div id="content-group" class="content-group row nested <?php print $content_group_width; ?>"> <div id="content-group-inner" class="content-group-inner inner"> <?php print theme('grid_block', $breadcrumb, 'breadcrumbs'); ?> <?php if ($content_top || $help || $messages): ?> <div id="content-top" class="content-top row nested"> <div id="content-top-inner" class="content-top-inner inner"> <?php print theme('grid_block', $help, 'content-help'); ?> <?php print theme('grid_block', $messages, 'content-messages'); ?> <?php print $content_top; ?> </div><!-- /content-top-inner --> </div><!-- /content-top --> <?php endif; ?> <div id="content-region" class="content-region row nested"> <div id="content-region-inner" class="content-region-inner inner"> <a name="main-content-area" id="main-content-area"></a> <?php print theme('grid_block', $tabs, 'content-tabs'); ?> <div id="content-inner" class="content-inner block"> <div id="content-inner-inner" class="content-inner-inner inner"> <?php if ($title): ?> <h1 class="title"><?php print $title; ?></h1> <?php endif; ?> <?php if ($content): ?> <div id="content-content" class="content-content"> <?php print $content; ?> <?php print $feed_icons; ?> </div><!-- /content-content --> <?php endif; ?> </div><!-- /content-inner-inner --> </div><!-- /content-inner --> </div><!-- /content-region-inner --> </div><!-- /content-region --> <?php print theme('grid_row', $content_bottom, 'content-bottom', 'nested'); ?> </div><!-- /content-group-inner --> </div><!-- /content-group --> <?php print theme('grid_row', $sidebar_last, 'sidebar-last', 'nested', $sidebar_last_width); ?> </div><!-- /main-content-inner --> </div><!-- /main-content --> <?php print theme('grid_row', $postscript_top, 'postscript-top', 'nested'); ?> </div><!-- /main-group-inner --> </div><!-- /main-group --> </div><!-- /main-inner --> </div><!-- /main --> </div><!-- /main-wrapper --> <!-- postscript-bottom row: width = grid_width --> <?php print theme('grid_row', $postscript_bottom, 'postscript-bottom', 'full-width', $grid_width); ?> <!-- footer row: width = grid_width --> <?php print theme('grid_row', $footer, 'footer', 'full-width', $grid_width); ?> <!-- footer-message row: width = grid_width --> <div id="footer-message-wrapper" class="footer-message-wrapper full-width"> <div id="footer-message" class="footer-message row <?php print $grid_width; ?>"> <div id="footer-message-inner" class="footer-message-inner inner clearfix"> <?php print theme('grid_block', $footer_message, 'footer-message-text'); ?> </div><!-- /footer-message-inner --> </div><!-- /footer-message --> </div><!-- /footer-message-wrapper --> </div><!-- /page-inner --> </div><!-- /page --> <?php print $closure; ?> </body> </html> CSS /* $Id: style.css,v 1.1.2.11 2010/07/02 22:11:04 sociotech Exp $ */ /* Margin, Padding, Border Resets -------------------------------------------------------------- */ html, body, div, span, p, dl, dt, dd, ul, ol, li, h1, h2, h3, h4, h5, h6, form, fieldset, input, textarea { margin: 0; padding: 0; } img, abbr, acronym { border: 0; } /* HTML Elements -------------------------------------------------------------- */ p { margin: 1em 0; } h1, h2, h3, h4, h5, h6 { margin: 0 0 0.5em 0; } h1 { color: white !important; text-shadow: black !important; } ul, ol, dd { margin-bottom: 1.5em; margin-left: 2em; /* LTR */ } li ul, li ol { margin-bottom: 0; } ul { list-style-type: disc; } ol { list-style-type: decimal; } a { margin: 0; padding: 0; text-decoration: none; } a:link, a:visited { } a:hover, a:focus, a:active { text-decoration: underline; } blockquote { } hr { height: 1px; border: 1px solid gray; } /* tables */ table { border-spacing: 0; width: 100%; } tr.even td, tr.odd td { background-color: #FFFFFF; border: 1px solid #dbdbdb; } caption { text-align: left; } th { margin: 0; padding: 0 10px 0 0; } th.active img { display: inline; } thead th { padding-right: 10px; } td { margin: 0; padding: 3px; } /* Remove grid block styles from Drupal's table ".block" class */ td.block { border: none; float: none; margin: 0; } /* Maintain light background/dark text on dragged table rows */ tr.drag td, tr.drag-previous td { background: #FFFFDD; color: #000; } /* Accessibility /-------------------------------------------------------------- */ /* skip-link to main content, hide offscreen */ #skip a, #skip a:hover, #skip a:visited { height: 1px; left: 0px; overflow: hidden; position: absolute; top: -500px; width: 1px; } /* make skip link visible when selected */ #skip a:active, #skip a:focus { background-color: #fff; color: #000; height: auto; padding: 5px 10px; position: absolute; top: 0; width: auto; z-index: 99; } #skip a:hover { text-decoration: none; } /* Helper Classes /-------------------------------------------------------------- */ .hide { display: none; visibility: hidden; } .left { float: left; } .right { float: right; } .clear { clear: both; } /* clear floats after an element */ /* (also in ie6-fixes.css, ie7-fixes.css) */ .clearfix:after, .clearfix .inner:after { clear: both; content: "."; display: block; font-size: 0; height: 0; line-height: 0; overflow: auto; visibility: hidden; } /* Grid Layout Basics (specifics in 'gridnn_x.css') -------------------------------------------------------------- */ /* center page and full rows: override this for left-aligned page */ .page, .row { margin: 0 auto; } /* fix layout/background display on floated elements */ .row, .nested, .block { overflow: hidden; } /* full-width row wrapper */ div.full-width { width: 100%; } /* float, un-center & expand nested rows */ .nested { float: left; /* LTR */ margin: 0; width: 100%; } /* allow Superfish menus to overflow */ #sidebar-first.nested, #sidebar-last.nested, div.superfish { overflow: visible; } /* sidebar layouts */ .sidebars-both-first .content-group { float: right; /* LTR */ } .sidebars-both-last .sidebar-first { float: right; /* LTR */ } /* Grid Mask Overlay -------------------------------------------------------------- */ #grid-mask-overlay { display: none; left: 0; opacity: 0.75; position: absolute; top: 0; width: 100%; z-index: 997; } #grid-mask-overlay .row { margin: 0 auto; } #grid-mask-overlay .block .inner { background-color: #e3fffc; outline: none; } .grid-mask #grid-mask-overlay { display: block; } .grid-mask .block { overflow: visible; } .grid-mask .block .inner { outline: #f00 dashed 1px; } #grid-mask-toggle { background-color: #777; border: 2px outset #fff; color: #fff; cursor: pointer; font-variant: small-caps; font-weight: normal; left: 0; -moz-border-radius: 5px; padding: 0 5px 2px 5px; position: absolute; text-align: center; top: 22px; -webkit-border-radius: 5px; z-index: 998; } #grid-mask-toggle.grid-on { border-style: inset; font-weight: bold; } /* Site Info -------------------------------------------------------------- */ #header-site-info { width: auto; } #site-name-wrapper { float: left; /* LTR */ } #site-name, #slogan { display: block; } #site-name a:link, #site-name a:visited, #site-name a:hover, #site-name a:active { text-decoration: none; } #site-name a { outline: 0; } /* Regions -------------------------------------------------------------- */ /* Header Regions -------------------------------------------------------------- */ #header-group { overflow: visible; } /* Content Regions (Main) -------------------------------------------------------------- */ .node-bottom { margin: 1.5em 0 0 0; } /* Clear floats on regions -------------------------------------------------------------- */ #header-top-wrapper, #header-group-wrapper, #preface-top-wrapper, #main-wrapper, #preface-bottom, #content-top, #content-region, #content-bottom, #postscript-top, #postscript-bottom-wrapper, #footer-wrapper, #footer-message-wrapper { clear: both; } /* Drupal Core /-------------------------------------------------------------- */ /* Lists /-------------------------------------------------------------- */ .item-list ul li { margin: 0; } .block ul, .block ol { margin-left: 2em; /* LTR */ padding: 0; } .content-inner ul, .content-inner ol { margin-bottom: 1.5em; } .content-inner li ul, .content-inner li ol { margin-bottom: 0; } .block ul.links { margin-left: 0; /* LTR */ } /* Menus /-------------------------------------------------------------- */ ul.menu li, ul.links li { margin: 0; padding: 0; } /* Primary Menu /-------------------------------------------------------------- */ /* use ID to override overflow: hidden for .block, dropdowns should always be visible */ #primary-menu { overflow: visible; } /* remove left margin from primary menu list */ #primary-menu.block ul { margin-left: 0; /* LTR */ } /* remove bullets, float left */ .primary-menu ul li { float: left; /* LTR */ list-style: none; position: relative; } /* style links, and unlinked parent items (via Special Menu Items module) */ .primary-menu ul li a, .primary-menu ul li .nolink { display: block; padding: 0.75em 1em; text-decoration: none; } /* Add cursor style for unlinked parent menu items */ .primary-menu ul li .nolink { cursor: default; } /* remove outline */ .primary-menu ul li:hover, .primary-menu ul li.sfHover, .primary-menu ul a:focus, .primary-menu ul a:hover, .primary-menu ul a:active { outline: 0; } /* Secondary Menu /-------------------------------------------------------------- */ .secondary-menu-inner ul.links { margin-left: 0; /* LTR */ } /* Skinr styles /-------------------------------------------------------------- */ /* Skinr selectable helper classes */ .fusion-clear { clear: both; } div.fusion-right { float: right; /* LTR */ } div.fusion-center { float: none; margin-left: auto; margin-right: auto; } .fusion-center-content .inner { text-align: center; } .fusion-center-content .inner ul.menu { display: inline-block; text-align: center; } /* required to override drupal core */ .fusion-center-content #user-login-form { text-align: center; } .fusion-right-content .inner { text-align: right; /* LTR */ } /* required to override drupal core */ .fusion-right-content #user-login-form { text-align: right; /* LTR */ } /* Large, bold callout text style */ .fusion-callout .inner { font-weight: bold; } /* Extra padding on block */ .fusion-padding .inner { padding: 30px; } /* Adds 1px border and padding */ .fusion-border .inner { border-width: 1px; border-style: solid; padding: 10px; } /* Single line menu with separators */ .fusion-inline-menu .inner ul.menu { margin-left: 0; /* LTR */ } .fusion-inline-menu .inner ul.menu li { border-right-style: solid; border-right-width: 1px; display: inline; margin: 0; padding: 0; white-space: nowrap; } .fusion-inline-menu .inner ul.menu li a { padding: 0 8px 0 5px; /* LTR */ } .fusion-inline-menu .inner ul li.last { border: none; } /* Hide second level (and beyond) menu items */ .fusion-inline-menu .inner ul li.expanded ul { display: none; } /* Multi-column menu style with bolded top level menu items */ .fusion-multicol-menu .inner ul { margin-left: 0; /* LTR */ text-align: left; /* LTR */ } .fusion-multicol-menu .inner ul li { border-right: none; display: block; font-weight: bold; } .fusion-multicol-menu .inner ul li.last { border-right: none; } .fusion-multicol-menu .inner ul li.last a { padding-right: 0; /* LTR */ } .fusion-multicol-menu .inner ul li.expanded, .fusion-multicol-menu .inner ul li.leaf { float: left; /* LTR */ list-style-image: none; margin-left: 50px; /* LTR */ } .fusion-multicol-menu .inner ul.menu li.first { margin-left: 0; /* LTR */ } .fusion-multicol-menu .inner ul li.expanded li.leaf { float: none; margin-left: 0; /* LTR */ } .fusion-multicol-menu .inner ul li.expanded ul { display: block; margin-left: 0; /* LTR */ } .fusion-multicol-menu .inner ul li.expanded ul li { border: none; margin-left: 0; /* LTR */ text-align: left; /* LTR */ } .fusion-multicol-menu .inner ul.menu li ul.menu li { font-weight: normal; } /* Split list across multiple columns */ .fusion-2-col-list .inner .item-list ul li, .fusion-2-col-list .inner ul.menu li { float: left; /* LTR */ width: 50%; } .fusion-3-col-list .inner .item-list ul li, .fusion-3-col-list .inner ul.menu li { float: left; /* LTR */ width: 33%; } .fusion-2-col-list .inner .item-list ul.pager li, .fusion-3-col-list .inner .item-list ul.pager li { float: none; width: auto; } /* List with bottom border Fixes a common issue when list items have bottom borders and appear to be doubled when nested lists end and begin. This removes the extra border-bottom */ .fusion-list-bottom-border .inner ul li { list-style: none; list-style-type: none; list-style-image: none; } .fusion-list-bottom-border .inner ul li, .fusion-list-bottom-border .view-content div.views-row { padding: 0 0 0 10px; /* LTR */ border-bottom-style: solid; border-bottom-width: 1px; line-height: 216.7%; /* 26px */ } .fusion-list-bottom-border .inner ul { margin: 0; } .fusion-list-bottom-border .inner ul li ul { border-bottom-style: solid; border-bottom-width: 1px; } .fusion-list-bottom-border .inner ul li ul li.last { border-bottom-style: solid; border-bottom-width: 1px; margin-bottom: -1px; margin-top: -1px; } #views_slideshow_singleframe_pager_slideshow-page_2 .pager-item { display:block; } #views_slideshow_singleframe_pager_slideshow-page_2 { position:absolute; right:0; top:0; } #header-group-wrapper { background: none; } #page { background-color:#F3F3F3; background-image:url('/sites/all/themes/fusion/fusion_core/images/runswithgradient.jpg'); background-repeat:no-repeat; background-attachment: fixed; width: auto; } #views_slideshow_singleframe_pager_slideshow-page_2 div a img { top:0px; height:60px; width:80px; padding-right:10px; padding-bottom:19px; } #mycontent{ width: 720px; } .product-body { -moz-border-radius: 4px 4px 4px 4px; margin: 0 0 20px; overflow: hidden; padding: 20px; background: none repeat scroll 0 0 #F7F7F7; border: 1px solid #000000; border-style:solid; border-width:thin; color:#000000; } #product-details { background: none repeat scroll 0 0 #F7F7F7 !important; border: 1px solid #000000 !important; color: #8E8E8E; } #logo { position: relative; top: 30px; /* 30 pixels from the top of the page */ left: 80px; /* 80 pixels from the left hand side */ z-index:1099; border: 1px solid red; /* So we can see what is happening */ } #breadcrumbs-inner { background: none; border-color: transparent; border-style: none; } #block-views-new_products-block_1{ height:200px; } /* List with no bullet and extra padding This is a common style for menus, which removes the bullet and adds more vertical padding for a simple list style */ .fusion-list-vertical-spacing .inner ul, .fusion-list-vertical-spacing div.views-row-first { margin-left: 0; margin-top: 10px; } .fusion-list-vertical-spacing .inner ul li, .fusion-list-vertical-spacing div.views-row { line-height: 133.3%; /* 16px/12px */ margin-bottom: 10px; padding: 0; } .fusion-list-vertical-spacing .inner ul li { list-style: none; list-style-image: none; list-style-type: none; } .fusion-list-vertical-spacing .inner ul li ul { margin-left: 10px; /* LTR */ } /* Bold all links */ .fusion-bold-links .inner a { font-weight: bold; } /* Float imagefield images left and add margin */ .fusion-float-imagefield-left .field-type-filefield, .fusion-float-imagefield-left .image-insert, .fusion-float-imagefield-left .imagecache { float: left; /* LTR */ margin: 0 15px 15px 0; /* LTR */ } /* Clear float on new Views item so each row drops to a new line */ .fusion-float-imagefield-left .views-row { clear: left; /* LTR */ } /* Float imagefield images right and add margin */ .fusion-float-imagefield-right .field-type-filefield, .fusion-float-imagefield-right .image-insert .fusion-float-imagefield-right .imagecache { float: right; /* LTR */ margin: 0 0 15px 15px; /* LTR */ } /* Clear float on new Views item so each row drops to a new line */ .fusion-float-imagefield-right .views-row { clear: right; /* LTR */ } /* Superfish: all menus */ .sf-menu li { list-style: none; list-style-image: none; list-style-type: none; } /* Superfish: vertical menus */ .superfish-vertical { position: relative; z-index: 9; } ul.sf-vertical { background: #fafafa; margin: 0; width: 100%; } ul.sf-vertical li { border-bottom: 1px solid #ccc; font-weight: bold; line-height: 200%; /* 24px */ padding: 0; width: 100%; } ul.sf-vertical li a:link, ul.sf-vertical li a:visited, ul.sf-vertical li .nolink { margin-left: 10px; padding: 2px; } ul.sf-vertical li a:hover, ul.sf-vertical li a.active { text-decoration: underline; } ul.sf-vertical li ul { background: #fafafa; border-top: 1px solid #ccc; margin-left: 0; width: 150px; } ul.sf-vertical li ul li.last { border-top: 1px solid #ccc; margin-bottom: -1px; margin-top: -1px; } ul.sf-vertical li ul { border-top: none; padding: 4px 0; } ul.sf-vertical li ul li { border-bottom: none; line-height: 150%; /* 24px */ More below but I can't paste that much Thanks for the suggestion I've tried this #header-group { position: relative; z-index: 9; } #logo { position: abosolute; top: 230px; /* 30 pixels from the top of the page */ left: 10px; /* 80 pixels from the left hand side */ z-index: 999; } but it's not working. I've taken a screen shot of the div to show the structure. http://i.stack.imgur.com/ff4DP.png

    Read the article

  • How to use tscon on Windows7?

    - by Radek
    I need to run overnight automation testing using RFT and IE on Windows7 virtual machine. I found that restarting the Windows box before the testing starts helps. I am moving the production environment from Windows XP to Windows 7. RFT used to complain when running RFT scripts that CRFCN0557E: Activation failed when running under a Terminal Services environment. This may be caused by using a minimized terminal window - try playing back without minimizing the terminal window (it does not need to be full-screen). Running tscon.exe 0 /dest:console prior starting any RFT script fix the error on Windows XP. But not on Windows7. I did some research and was trying for hours to fix that but nothing helped. There is no screen saver turned on on Windows7. I tried to run both but nothing helped. tscon.exe 0 /dest:console tscon.exe 1 /dest:console On Windows7 tscon returns {ErrorPrintf(): LoadString failed, Error 15105, (0x00003B01)} Error [15105]:The resource loader cache doesn't have loaded MUI entry. Error [0]:The operation completed successfully. On Windows XP tscon returns Could not connect sessionID 0 to sessionname console, Error code 7045 Error [7045]:The requested session access is denied. I just double checked that running tscon.exe 0 /dest:console on Windows XP solves the issue. Cannot understand the output of the tscon command then. Any idea how I can run RFT scripts after I restart the Windows box automatically? Preferably without involving any other computer. I was even thinking to use the old Windows XP to make remote desktop session to make RFT happy. I hope there is other better solution to that.

    Read the article

  • High CPU usage by 'svchost.exe' and 'coreServiceShell.exe'

    - by kush.impetus
    I am having a laptop running on Windows 7 Ultimate 32-bit. Since past few days, my laptop is facing a serious problem. Whenever I connect to Internet, either svchost.exe or coreServiceShell.exe or both hog the CPU. The coreServiceShell.exe consumes a lot of RAM also. Going into the details, I found that high CPU usage of svchost.exe is caused by Network Location Awareness service. And the high CPU usage of coreServiceShell.exe is caused by Trend Micro Titanium Internet Security 2012. That kind'a makes me think that Trend Micro may be the root of the problem. After further testing, I found that if I use IE or Firefox to browse the Internet, immediately after connecting to Internet, things are normal. See and But if I use Google Chrome, the coreServiceShell.exe hogs both CPU and RAM. At this point, if I disconnect the Internet, the CPU and RAM usage by coreServiceShell.exe continues to be high till I close the Chrome. Also, when I close the Chrome, while Internet is connected, svchost.exe continues to hog CPU but coreServiceShell.exe leaves the race. That makes think that Chrome is the root of the problem, but again, tracing coreServiceShell.exe takes me back to Trend Micro Internet Security. Stopping the Protection by the Trend Micro Internet Security doesn't help either (I am not able to stop its services though). I have updated the Chrome, but no help. I just can't figure out who is the culprit. I can't do without the Google Chrome (of course, by not using it) because of its immensely useful and indispensable features both during browsing and development. Secondly, I can't uninstall the Trend Micro Internet security Suite since it still has few months before it expires and is proving me reliable protection. What could be the cause of the problem and what can I do to resolve this? Thanks in advance

    Read the article

  • xinetd 'connection reset by peer'

    - by ceejayoz
    I'm using percona-clustercheck (which comes with Percona's XtraDB Cluster packages) with xinetd and I'm getting an error when trying to curl the clustercheck service. /usr/bin/clustercheck: #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="clustercheckuser" MYSQL_PASSWORD="clustercheckpassword!" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" exit 0 else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" exit 1 fi /etc/xinetd.mysqlchk: # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID only_from = 10.0.0.0/8 127.0.0.1 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } When attempting to curl the service, I get a valid response (HTTP 200, text) but a 'connection reset by peer' notice at the end: HTTP/1.1 200 OK Content-Type: text/plain Percona XtraDB Cluster Node is synced. curl: (56) Recv failure: Connection reset by peer Unfortunately, Amazon ELB appears to see this as a failed check, not a succeeded one. How can I get clustercheck to exit gracefully in a manner that curl doesn't see a connection failure?

    Read the article

  • TortoiseSVN hangs in Windows Server 2012 Azure VM

    - by ZaijiaN
    Following @shanselman's article on remoting into an Azure VM for development, I spun up my own VS 2013 VM, and that image runs on WS 2012. Once I was able to remote in, I started installing all my dev tools, including Tortoise SVN 1.8.3 64bit. Things went south once I started attempting to check out code from my personal svn server. It would hang and freeze often, although sometimes it would work - I was able to partially check out projects, but I would get frequent connection time out errors. My personal svn server (VisualSVN 2.7.2) runs at home on a windows 7 machine, and I have a dyndns url pointing to it. I have also configured my router to passthrough all 443 traffic to the appropriate port on the server. I self-signed a cert and made sure it was imported into the VM cert store under trusted root authorities. I have no problems connecting to my svn server from 4-5 other computers & locations. From the Azure VM, in both IE and Chrome, I can access the repository web browser with no issues. There are no outbound firewall restrictions. I have installed other SVN add-ons for Visual Studio (AnkhSVN, VisualSVN) and attempted to connect with my svn server, with largely the same results - random and persistent connection issues (hangs/timeouts). I spun up a completely fresh WS 2008 Azure VM, and installed TortoiseSVN, and had the same results. So I'm at a loss as to what the problem is and how to fix it. Web searches on tortoisesvn and windows server issues doesn't yield any current or relevant information. At this point, i'm guessing that maybe some setting or configuration that MS Azure VM images is the culprit - although I should probably attempt to spin up my own local WS VM to rule out that it's a window server issue. Any thoughts? I hope I'm just missing something really obvious!

    Read the article

  • This operation has been canceled due to restrictions in effect on this computer. Please contact your

    - by WebDude
    I am having a highly annoying problem on Windows 7 with Microsoft Outlook 2007. Whenever I click on any hyperlinks I am present with the message This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator and let's not forget the most ear-piecing "DING" to accompany this wonderful informative message. Now I have searched the web high and low for a solution here and most sources suggest the same solution of resetting your IE as your default browser. Tried .. failed A lot of sources suggest this has something to do with installing and uninstalling chrome. I have never installed Chrome but am actually consdering this to see if it by some chance fixes my computer. A lot of sources also point to a microsoft kb article 325478 which is focused around Windows XP and totally unrelated to my problem. I see there are some other queries on SuperUser with no resolution. Please can someone help solve this highly annoying issue. I am running Window 7 professional x64 Microsoft Office 2007 Microsoft Security Essentials Running in a windows work group with default policy settings HELP!

    Read the article

  • Error with python-setuptools doing "sudo easy_install python-graph-core"

    - by Dan
    Using easy_install, part of the python-setuptools, I get the following error: $ sudo easy_install python-graph-core [sudo] password for dan: Searching for python-graph-core Reading http://pypi.python.org/simple/python-graph-core/ Reading http://code.google.com/p/python-graph/ Reading http://code.google.com/p/python-graph/downloads/list?can=1 Reading http://code.google.com/p/python-graph/downloads/list Best match: python-graph-core 1.7.0 Downloading http://python-graph.googlecode.com/files/python-graph-core-1.7.0.tar.gz Processing python-graph-core-1.7.0.tar.gz Running python-graph-core-1.7.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-GwpYiM/python-graph-core-1.7.0/egg-dist-tmp-1yqbyV setup.py:8: Warning: 'as' will become a reserved keyword in Python 2.6 Traceback (most recent call last): File "/usr/bin/easy_install", line 8, in <module> load_entry_point('setuptools==0.6c9', 'console_scripts', 'easy_install')() File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 1671, in main with_ei_usage(lambda: File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 1659, in with_ei_usage return f() File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 1675, in <lambda> distclass=DistributionWithoutHelpCommands, **kw File "/usr/lib/python2.5/distutils/core.py", line 151, in setup dist.run_commands() File "/usr/lib/python2.5/distutils/dist.py", line 974, in run_commands self.run_command(cmd) File "/usr/lib/python2.5/distutils/dist.py", line 994, in run_command cmd_obj.run() File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 211, in run self.easy_install(spec, not self.no_deps) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 446, in easy_install return self.install_item(spec, dist.location, tmpdir, deps) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 476, in install_item dists = self.install_eggs(spec, download, tmpdir) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 655, in install_eggs return self.build_and_install(setup_script, setup_base) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 930, in build_and_install self.run_setup(setup_script, setup_base, args) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 919, in run_setup run_setup(setup_script, args) File "/usr/lib/python2.5/site-packages/setuptools/sandbox.py", line 27, in run_setup lambda: execfile( File "/usr/lib/python2.5/site-packages/setuptools/sandbox.py", line 63, in run return func() File "/usr/lib/python2.5/site-packages/setuptools/sandbox.py", line 29, in <lambda> {'__file__':setup_script, '__name__':'__main__'} File "setup.py", line 8 except ImportError as ie: ^ SyntaxError: invalid syntax Any suggestions to what I may be doing wrong? Thanks, Dan

    Read the article

  • Mod Rewrite Help - Pseudo-Subdirectories

    - by Gimpyfuzznut
    I am dealing with a frustrating problem with Joomla that is going to require some url trickery. The idea is straight-forward but after reading a bunch of guides for mod-rewrite, I still can't seem to get it work. Let's say my site is www.mysite.com. Joomla is already performing some rewriting for SEF urls so I have links like www.mysite.com/home and www.mysite.com/news and so on. I want to be able to have (4) pseudo-subdirectories like www.mysite.com/mode1/ and www.mysite.com/mode2/ and so on. These subdirectories should work as if the subdirectory isn't there, ie both www.mysite.com/mode1/home and www.mysite.com/mode2/home should pull up the same www.mysite.com/home. It should point any www.mysite.com/mode1/anypagehere to www.mysite.com/anypagehere. The reason I am asking for this is because I will be reading the url for mode1, mode2, etc, to modify the template page. There will be a landing page that will direct people to /mode1/ and /mode2/ etc and the template will change based on that. Note, that I don't want to actually pass a parameter to the url accessible by a GET or whatever because Joomla removes it (perhaps because of my current mod_rewrite settings). I've pasted the current .htaccess file. RewriteBase /joomla ##########Rewrite rules to block out some common exploits RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] ########## Begin - Joomla! core SEF Section RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php #RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] ########## End - Joomla! core SEF Section

    Read the article

  • How do you install/configure JBoss on Linux/Unix?

    - by mafro
    I'm currently working on how install and configure multiple (30+) JBoss EAP 5 configurations (both standalone and clusters) for development, test and production at a client's site (running SuSE). I'm not to fancy about the jboss way of storing application/configuration together with system files, so I have tried to split things up (ie moving server config out of the jboss installation directory). I also would like minimize the amount of configuration needed when upgrading/patching jboss - but I'm not done thinking about that... It would be great to hear how you've done and what you think about my approach. This is how my installations look like (for the moment): Standard JBoss EAP install (minus server configs): /opt/jboss/jboss-eap-5.0/jboss-as /opt/jboss/jboss-eap-5.0/jboss-as/bin/ /opt/jboss/jboss-eap-5.0/jboss-as/lib/ /opt/jboss/jboss-eap-5.0/jboss-as/server/ [server configs removed to avoid starting them by mistake] /opt/jboss/jboss-eap-5.0/jboss-as/.../ Application (some jboss folders has been omitted - you'll get the point anyway): /app/<project>/ [$app.dir - application specific base folder] /app/<project>/jboss/ [$jboss.home] /app/<project>/jboss/bin/ -> /opt/jboss/jboss-eap-5.0/jboss-as/bin /app/<project>/jboss/lib/ -> /opt/jboss/jboss-eap-5.0/jboss-as/lib /app/<project>/jboss/server/<cfg>/ [project specific config based on 'production'] /app/<project>/jboss/server/<cfg>/log/ -> /log/<project>/<cfg> /app/<project>/jboss/server/<cfg>/... /app/<project>/jboss/.../ -> /opt/jboss/jboss-eap-5.0/jboss-as/.../ /app/<project>/bin/ [application specific scripts for start/stop etc - wraps jboss supplied scripts] /app/<project>/deploy/ [application deploy folder] /app/<project>/etc/ [application specific config] Questions: How do you install JBoss (on linux/unix systems)? Where do you put JBoss and what modifications do you do? Where do you put your applications and application specific files? Do you share JBoss instances between applications or run one instance/cluster per application? How do you manage configuration changes (i.e. your modifications of jboss standard config)?

    Read the article

  • Outlook unable to synchronize SharePoint library - error 0x80004005

    - by DLux
    We have one large library (~10 GB) on SharePoint that cannot be synchronized with Outlook, even if you only attempt to synch one of the smaller sub folders in the library. Other libraries (or other library sub folders) work fine with Outlook. This is with MOSS 2007 SP1 and Outlook 2007 SP2. The error is: Task 'SharePoint' reported error (0x80004005): 'An error occurred either in Outlook or SharePoint. Contact the SharePoint site administrator.' Reproducing the error Open up the large SharePoint document library in Internet Explorer From the Actions menu, select Connect to Outlook Select Allow on the stssync: security warning that pops up Outlook automatically tries an initial sync and sync status immediately shows the above error. Update 1: I verified the same issue occurs on Windows XP SP3 with IE 6 using Outlook 2007 SP2 and the same SharePoint library (it was originally tested on Windows 7). The issue is definitely related to the library or Outlook. Update 2: Using stsadm I exported the site with this large document library (8.6 GB 15,000 items) and imported it on to a development system. The result is the same on the development system - multiple clients are unable to connect Outlook to the library and get the 0x80004005 error above.

    Read the article

  • Creating a DNS Server

    - by c.adhityaa
    OK, I am a complete newbie to all this, so please bear with me. I want to create a DNS Server (like Google does - 8.8.8.8). I understand that a DNS Server is a Server that gives a IP on being given a hostname, ie. when I ask it what is the IP of google.com, it says "64.233.160.0". So, what I want to do is create a similar one that holds records of what translates to what. I thought of this since it looks to be similar to a webserver - ask for a page and it gives back the page. That is, when my machine has the IP xxx.xxx.xxx.xxx and people chose xxx.xxx.xxx.xxx as their Primary DNS Server, then when they ask "www.google.com", I sould be able to tell "64.233.160.0". So, how do I create this DNS Server that is accessible to everyone in the world ? It would be easier if we have something like EasyPHP which is the analogue to a webserver here. I am sorry if I have caused any trauma because this might seem rubbish to experts ;) Adhityaa

    Read the article

  • PDF Converter wanted: Convert 8.5*11 PDF images into 600*800px PDF images for the Nook

    - by Astro
    I have PDF files that are maritime charts, For example this one from the Delaware Bay http://ocsdata.ncd.noaa.gov/BookletChart/12304_BookletChart_HomeEd.pdf There is a lot of detailed information in the image. When I show them on a monitor the details are shown. When I put them on the Nook they are sized to fit the Nook screen (about 3*5) and all the details are lost. Since the Nook pdf reader does not have a zoom feature, the charts are unreadable. I'd like to convert them to fit on the Nook screen(600*800px). This means the images would need to be sliced into multiple images. (ie a single image (page) would get split into 5 rows and 4 columns) In a perfect world they would get converted with a slight overlap, left to right, top to bottom. I could then page through the smaller slices to find the section I need. I had used PaperCrop in the past to convert two col PDF's (highly recommended) but it can't do anything with the images. ImageMagick does a lot with combining images, but I didn't see any split options to split the image into tiles. Windows program preferred. Thanks!

    Read the article

  • Have I bricked my Sun V20z?

    - by David Mackintosh
    I have a small pile of Sun V20z computers. I was trying to update the SP and BIOS firmwares in order to bring them all up to the same standard -- mostly to get the updated (ie actually useful) SP functionality, and figured that I would just do the BIOS while I was at it. For three of the four computers, it worked perfectly. However after the BIOS update, the fourth system won't boot. I did this: batch05-mgmt $ sp get mounts Local Remote /mnt 10.16.0.8:/export/v20z batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Bios Flash Transmit Started Bios Flash Transmit Complete Bios Flash update Progress: 7 Bios Flash update Progress: 6 Bios Flash update Progress: 5 Bios Flash update Progress: 4 Bios Flash update Progress: 3 Bios Flash update Progress: 2 Bios Flash update Progress: 1 Bios Flash update complete batch05-mgmt $ platform set power state on This command may take several minutes. Please be patient. After an hour of waiting, it still won't start. The chassis powers on, but beyond the fans spinning up and the hardware POST of the drives, nothing appears to happen. So if I try to re-flash the BIOS (on the theory that maybe something went wrong): batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Error. The operation timed out. Have I bricked it?

    Read the article

  • Zscaler. Certs, cookies, and port 80 traffic

    - by 54's_lol
    So I work at HQ for a large company that shall remain nameless. We use Zscaler and I had to roll out a 2048 cert per zscaler's request. People around me at work dont understand the technology and think that the cert's are what is allowing internet connectivity. From my understanding(and please chime in) is the cookie located C:\Users\$$$$$$4$$\AppData\Roaming\Macromedia\Flash Player#SharedObjects\Q3JQJQJV\gateway.zscaler.net\zscaler.swf here that gets created when you provide your creds the first time you use the browser. The cert's are just simply a way of inspecting the SSL traffic as zscaler had no way of doing this before without them. They are essentially using the classic MITM attack to parse your SSL traffic. Gmail is smart enough to recognize this as you get a warning. My question is this, is there a product or service that I can use to verify my web browser when at home(I.E. off company network) isn't still getting routed to zscaler's cloud? If i do a tracert that will work fine. It's the port 80 and 443 web traffic zscaler and my company is after. I would like to verify that when I'm off their premise that my web traffic is using only my isp and the path to whatever content I'm searching for. Do the cert's i'm pushing and browser authentication do something behind the curtain that forces web traffic to get routed to zscaler? I searched quite a bit and would very much like to know if I'm ever off company scrutiny. I do know zscaler offers the service to force the scenario im asking about. Can I prove how my web traffic is getting routed? Thanks for any insight. I've been a fan for a long time and your guy's kung fu is very strong:-)

    Read the article

  • Couldn't upload files to Sharepoint site while passing through Squid Proxy

    - by Ecio
    Hi all, we have this issue: one of our employees is collaborating with a supplier and he needs to upload documents on a Sharepoint site hosted on the supplier's main site. In our environment we use Squid Proxy to allow people navigate on the net (we have NTLM authentication and users transparently authenticate while using IE and FF). It seems that this specific Sharepoint site is using Integrated Windows Authentication only, and according to some research on the net it seems that this can have troubles with proxies. More specifically, we have tried two Squid versions: with Squid 3.0 we are unable to login to the site (the browser loads an empty page) with Squid 2.7 (that supports "Connection Pinning") we are able to login into the site, move on the different sections BUT.. when we try to upload a file that is bigger than a couple of KiloBytes (i.e. 10KB) the browser loads an error page (i think it's a 401 unauthorized but i must verify it) we've tried changing a couple of Squid options (in 2.7), what we got is that when you try to upload the file you got an authentication box (just like the initial login) and it refuses to go on even if you enter the same authentication credentials. What's really strange is that when you try to upload a small file (i.e. a text or binary 1KB file) the upload succeeds. I initially thought that maybe there was something misconfigured on their Sharepoint site but I've tried also this site: www.xsolive.com (it's a sharepoint 2007 demo site) and I've experienced the same problem. Has any of you experienced such behaviour? Thanks! Of course we've suggested to the supplier to activate also Basic+SSL and we're waiting for their reply..

    Read the article

  • Can a CNAME be a hostname

    - by pulegium
    This is bit of a theological question, but nonetheless... So, a server has a hostname, let's say the fqdn is hostname.example.com (to be really precise about what I mean, this is the name that is set in /etc/sysconfig/network). The very same server has multiple interfaces on different subnets. Let's say the IPs are 10.0.0.1 and 10.0.1.1. Now the question is, is it theoretically (mind you, this is important, I know that practically it works, but I'm interested in purely academic answer) allowed to have the following setup: interface1.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 hostname.example.com. IN CNAME interface1.example.com. OR should it rather be: hostname.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 interface1.example.com. IN CNAME hostname.example.com. I guess it's obvious which one is making more sense from the management/administration POV, but is it technically correct? The argument against the first setup is that a reverse lookup to 10.0.0.1 returns interface1.example.com and not what one might expect (ie the hostname: hostname.example.com), so the forward request and then sub sequential reverse lookups would return different results. Now, as I said, I want a theoretical answer. Links to RFC sections etc, that explicitly allows or disallows use of CNAME name as a hostname. If there's none, that's fine too, I just need to confirm. I failed to find any explicit statements so far, bar this book, where this situation is given as an example and implies that it can be done as one of the ways to avoid MX records pointing to a CNAME.

    Read the article

  • ASP.NET AJAX, WebSeal Junctions, and Sessions

    - by powella
    I've run up across a problem with ASP.NET AJAX (hooked up to WebServices directly) and accessing our site through a WebSeal junction. Listing 11. On this page; http://www.ibm.com/developerworks/tivoli/library/t-ajaxtam/index.html explains that requests to pages which do not result in a content type of text/html are not sent with cookie data. Hence, no session. ASP.NET AJAX requests are returned with a content type of "application/json; charset=utf-8". As such, the WebSeal junction is not appending the Session Cookie to the request. This results in our WebService seeing the user as invalid, due to no session information. The Junction has been setup properly with the -J parameter (thats an uppercase J, which appends the required script for WebSeal to the bottom of the page - this prevents forcing IE into quirks mode.) and we've confirmed that the necessary script exists in the output source. I'm up for any suggestions at this point, as I'm out of ideas. FWIW, the site runs perfectly when not accessed through the WebSeal Junction.

    Read the article

  • Nagios returns "No output returned from plugin" running process

    - by user56291
    I have a nagios server and a bunch of nagios clients that i currently monitor. All the clients are setup with the following nrpe configuration. check_users, check_load... metrics are successfully displayed on the nagios interface but check_nginx and check_server_proxy displayed as "Unknown"-(No output returned from plugin). As far as i understood nagios simply runs ps command and looks for either the argument strings or the name of the command to verify whether the service is running. Also with -c flag, one can give nagios a threshold to determine the output (ie: -c 1 returns 'OK' for if it finds at least 1 process.) nrpe_local.cfg: ###################################### # Do any local nrpe configuration here ###################################### allowed_hosts =127.0.0.1,10.0.2.181 command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10 command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 command[check_all_disks]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 command[check_swap]=/usr/lib/nagios/plugins/check_swap -w 50% -c 25% command[check_server_proxy]=/usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" command[check_nginx]=/usr/lib/nagios/plugins/check_procs -c 1:30 -C nginx nagios_server.cfg ... define host{ use generic-host ; Name of host template to use host_name plum alias plum address 10.0.2.88 check_command check-host-alive-by-ssh } ... #Check api-proxy-server define service{ use generic-service host_name plum service_description check api proxy service check_command check_nrpe!check_server_proxy } define service { use generic-service ; Name of service template to use host_name plum service_description CHECK_NGINX check_period 24x7 max_check_attempts 3 normal_check_interval 5 retry_check_interval 3 check_command check_nrpe!check_nginx notifications_enabled 1 } Also when i run the command on the nagios client: /usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" I get the desired output PROCS OK: 1 process with args 'api-v1/server.js' I would really appreciate any pointers that might help me solve why it nrpe command does not return the desired output on the nagios server panel.

    Read the article

  • Compiling realtime kernel from RHEL 6 MRG sources on CentOS 6

    - by Sashka B
    I'm trying to compile kernel-rt-2.6.33.9-rt31.75.el6rt.src.rpm from RHEL6 MRG source RPMs on Centos 6 x86_64 system. It's first time I'm doing this, so I did research on how to do this properly. From what I found, I did: rpm -ihv kernel-rt-2.6.33.9-rt31.75.el6rt.src.rpm cd ~/rpmbuild/SPECS nano kernel-rt.spec rpmbuild -bb kernel-rt.spec 2> build-err.log | tee build-out.log in kernel-rt.spec I've disbleed compilation of variants I don' need - ie compile only rt and firmware. Also defined not to build debuginfo. After compilation finished, I've got in ~/rpmbuild/RPMS/x86_64/ two files: kernel-rt-2.6.33.9-rt31.75.el6rt.x86_64.rpm kernel-rt-devel-2.6.33.9-rt31.75.el6rt.x86_64.rpm but when I tried to install kernel, I got error message: $ sudo rpm -ihv kernel-rt-2.6.33.9-rt31.75.el6rt.x86_64.rpm error: Failed dependencies: kernel-rt-firmware = 2.6.33.9-rt31.75.el6rt is needed by kernel-rt-2.6.33.9-rt31.75.el6rt.x86_64 There was no folder ~/rpmbuild/RPMS/noarch - where I would expect it to show up. Also, I've tried rpmbuild --rebuild kernel-rt-2.6.33.9-rt31.75.el6rt.src.rpm, but got same results... What am I doing wrong? I've seen this question, but it suggests what I tried already and I want to build kernel myself, not use pre-built from SLC.

    Read the article

  • What might cause https failure when not specifying SSL protocol?

    - by user35042
    I have a VBScript program that retrieves a web page from a server not under my control. The URL looks something like https://someserver.xxx/index.html. I use this code to create the object that does the page getting: Set objWinHttp = CreateObject("WinHttp.WinHttpRequest.5.1") When I wrote my program it had no problem retrieving this page. Recently, the web server serving this page went through an upgrade. Now my program can no longer fetch the page. Some clues: Clue 1. I can fetch the web page if I use a browser (I tried Firefox, IE, and Chrome). Clue 2. The VBScript code yields this error: The message received was unexpected or badly formatted. Clue 3. I can fetch the web page from the command line in certain cases but not in others: curl --sslv3 -v -k 'https://someserver.xxx/index.html' # WORKS! curl --sslv2 -v -k 'https://someserver.xxx/index.html' # WORKS! curl -v -k 'https://someserver.xxx/index.html' # FAILS curl --tlsv1 -v -k 'https://someserver.xxx/index.html' # FAILS In the case where I do not specify a protocol I get this error: * SSLv3, TLS handshake, Client hello (1): * error:14077417:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert illegal parameter * Closing connection #0 In the case where I specify --tlsv1 I get this error: * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS alert, Server hello (2): * error:14094417:SSL routines:SSL3_READ_BYTES:sslv3 alert illegal parameter * Closing connection #0 A. Does anyone have any suggestions or ideas on what might be going on at the web server end (I am unable to talk to the admins of the web server to find out what they changed). B. Is there a way I can change my VBScript code to work around this issue? Can the SSL version be forced?

    Read the article

  • How can a Virtual PC with Win XP install the East Asian Language? (or does any browser come with Chi

    - by Jian Lin
    How can a Virtual PC with Win XP on it install the East Asian Language? (or does any browser come with Chinese fonts?) After setting up a virtual PC with Win XP, if Chinese font is needed, then the usual way is to go to the Control Panel, select "Regional and Language" and go to the second tab and check the box "Install Files for East Asian Languages". After clicking OK, it asks for the file cplexe.exe on the XP SP3 CD 3... and is said to be about 230MB... In such case, how can the language pack or fonts be installed? (Update: I found that it is true for Window 7's Virtual PC with XP on it, as well as the XP SP3 with IE 8 that can be downloaded in the link below.) (I downloaded the virtual hard drive file .vhd from http://www.microsoft.com/downloads/details.aspx?FamilyId=21EABB90-958F-4B64-B5F1-73D0A413C8EF&displaylang=en so there is no "CD 3"... there) Or does any browser come with all the unicode fonts without needing the OS to support it?

    Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >