Search Results

Search found 16784 results on 672 pages for 'persistent connection'.

Page 245/672 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

• Port Forwarding a Specific Port (e.g. 22)

  - by Jerry Blair

  I'm still confused about establishing an SSH connection (port 22) between two computers on different internal networks. For example: I am on my computer with internal IP address IIP-1, connected to my router RT-1. There are 10 IIPs connected to RT-1. I want to establish an SSH connection to IIP-3 which is connected to router RT-2. There are 10 IIPs connected to RT-2. At any time, there can be multiple SSH connections between IIPs on RT-1 and RT-2. Since I only have port 22 available, I don't know which SSH session is talking between which IIPs. I looked at a couple of similar questions but am still unclear on the solution. Thanks much, Jerry

  Read the article

• Use Network-Manager to Connect to a wifi Access Point on the command-line

  - by Stefano Palazzo

  I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• Akka react vs receive

  - by Will I Am

  I am reading my way through Akka tutorials, but I'd like to get my feet wet with a real-life scenario. I'd like to write both a connectionless UDP server (an echo/ping-pong service) and a TCP server (also an echo service, but it keeps the connection open after it replies). My first question is, is this a good experimental use case for Akka, or am I better served with more common paradigms like IOCP? Would you do something like this with Akka in production? Although I understand conceptually the difference between react() and receive(), I struggle to choose one or the other for the two models. In the UDP model, there is no concept of who the sender is on the server, once the pong is sent, so should I use receive()? In the TCP model, the connection is maintained on the server after the pong, so should I use react()? If someone could give me some guidance, and maybe an opinion on how you'd design these two use cases, it would take me a long way. I have found a number of examples, but they didn't have explanations as to why they chose the paradigms they did.

  Read the article

• I'm receiving an SSL error in various browsers, but I can't find non-SSL content

  - by Scott Vercuski

  I'm receiving an error with my SSL connection. Using google chrome I see the following error: Your connection is encrypted with 128-bit encryption ... however this page includes other resources which are not secure I've scoured the source code, scripts and rendered code in the browser but cannot find where an http:// call is made. I've also used Fiddler2 to examine the traffic and everything is coming across via HTTPS. Has anyone run into this issue before and if so how did you go about finding the culprit. The website is running ASP.NET MVC3 in C#. The page in question is a simple payment page. The only external call is the google analytics tracking code. The page appears to load correctly, all images and scripts are in place.

  Read the article

• Lan, vpn on Amazon EC2, how to?

  The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

  Read the article

• apache2 mod_proxy without 301 moved permanently?

  - by Guy Sensei

  Is it possible to not send a 301 moved permanently response to the client when using mod_proxy? I would like the client to deal with the reverse proxy as opaquely as possible. My Virtual Host Settings- relevant snippet ProxyPreserveHost On ProxyPass /GTM http://192.168.1.27/GTM ProxyPassReverse /GTM http://192.168.1.27/GTM wget localhost/GTM --2011-09-27 21:54:22-- localhost/GTM Resolving localhost... ::1, 127.0.0.1 Connecting to localhost|::1|:80... failed: Connection refused. Connecting to localhost|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: localhost/GTM/ [following] --2011-09-27 21:54:22-- localhost/GTM/ Reusing existing connection to localhost:80. HTTP request sent, awaiting response... 200 OK

  Read the article

• Configuring Transmission for faster download

  - by Luis Alvarado

  I have tested on the same PC with the same torrent/magnet links the following Torrent Clients: Transmission Ktorrent Deluge qBittorrent Vuze After 7 days of testing I noticed that the only one that took longer to start downloading and to keep an optimum/max download speed was Transmission. It was the slowest of them all to download the same torrents or magnet links which I tested 8 torrents and 4 magnet links from different sites and the one that took the most to start downloading or start after a pause/resume event. The other 4 just took less than 2 seconds for example to start downloading and to download the same content between 50% less time to 80% less time. I think that Transmission has the same capabilities about downloading/resuming than the other torrent clients but it may be because of some configuration I need to do to get the same speed and effect than the others. In my tests all torrent clients were tested with their default configurations. No changes were made. They were tested on the same PC, with the same network connection in the same time periods. So I am thinking that Transmission just needs a little bit of configuration tunning. I also set the ports for use to the same one for each. Checked the router for any blocking and anything related to the network. What options can I change to make it so Transmission resumes a download faster (grabs the seeds faster) and keeps a fast download all the time (Stays with the seeds that offer the best connection for example). Both of which by the look of it are features that the rest of the torrent clients do already.

  Read the article

• Network connectivity logs on OSX

  - by Stephen

  I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

  Read the article

• Wireless network unavailable, no networks found after Windows update

  - by jacobsee

  Old Dell Inspiron 8200 laptop with Linksys Wireless G network adapter card (WPC54G v2). Wireless connection was working fine. Then I ran a bunch of windows updates, I think the last one was the recent .NET 3.5 service pack update. Now wireless networks won't connect. Using windows to manage wireless, no networks show up. I'm typing right now on another laptop where wireless is working fine. I've restarted router & Dell laptop several times. Tried to Repair wireless connection and refresh network list. Also restarted DHCP and WZC service, all to no avail. I then uninstalled .NET 3.5 SP (don't remember number) and .NET 3.0 SP2. I don't remember all the windows updates that I just ran because I haven't used this laptop in a while so had to catch up on some updates.

  Read the article

• HTTP downloads slow - FTP of same file very fast - Windows 2003

  - by Paul Hinett

  I am having some issues with download speeds on my site via http, i am averaging around 70kbps downloading a file that is around 70mb. But if i connect to my server via FTP and download the same file on the same computer / connection i am averaging about 300+kbps. I know my server has alot of connections at any one time, probably around 400 connections. My server has a 1gbps connection to the internet so there is plenty of bandwidth available, as proven with the FTP. I have no throttling of any kind enabled in IIS. If interested there is a test file here you can download to check the speed: http://filesd.house-mixes.com/test.zip I am based in the UK and the server is in Washington, USA if that makes any difference. Paul

  Read the article

• How do I get a Broadcom BCM4311 working?

  - by Fer1805

  I'm having serious problems installing the broadcom drivers for ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. Broadcom BCM4311 Wireless not working Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• Installing router - failed to verify router settings

  - by Andi

  I'm trying to install a TP-Link wireless router. I am using a modem an have a PPPoE connection. I connected the router to the computer and the modem, but in the last step of the Easy Setup it says " Failed to verify router settings. 1. Please check the WAN connection type and parameters. 2. Please check your connectivity and retry." The internet works fine if i connect the modem directly to the computer. When I connect the computer to the router, the wireless network is detected by other devices, but cannot be accessed. I accessed the router settings, and everything seems normal, except that it just says "Connecting...". It never manages to connect to the internet. I tried restarting the router and several walkthroughs on the web, but I couldn't get it to work.

  Read the article

• How to reconnect to Remote Session in a script?

  - by Lukasz

  Hello, I need to persist a Remote desktop connection across a reboot of a Terminal server. I'm thinking that it would be something like a scheduled task that would run periodically and check the running state of the session and restart it if it's down. BTW, I did check the "Reconnect..." checkbox on the advanced tab of the connection options, but it still goes down everytime we restart the terminal server. Does anyone have the script that would accomplish the above in a scheduled task, or perhaps another solution?

  Read the article

• Can't change Hyper Terminal Hardware Settings

  - by Tim

  Anyone here any good with Hyperterminal? Am having a nightmare trying to use it at work to update our telephone extensions. The company who supply our PABX box have told me that XP does strange things to Hyperterminal and that I should use Win2k. Which I did with the same result. I have narrowed the problem dowwn to the Hardware Settings for the connection in Hyper Terminal. No matter what I set (and I need 7E1) it defaults back to 8N1. Has anyone seen this behaviour before and know of a simple way around it? (Apart from buying a more expensive commercial version of Hyper Terminal, as suggested by our support people). Edit: I should point out I have to connect via a phone line so a direct serial connection is not an option. Cheers Tim

  Read the article

• Is LiveDrive.com reliable?

  - by Marc

  I'm currently using DropBox (50GB account) which works fine, but at this moment I'm not impressed with its speed. I have a 60down/6up connection and only LiveDrive can use almost the full bandwidth of my connection. Dropbox often is very slow (avg. 100-500Kb/s compared to LD at 6MB/s). If I only look at the speed and storage costs then LD is much better, but I don't have enough experience with LD to be able to say something about reliability. Can anyone comment on this? Thx.

  Read the article

• With dnsmasq as the DNS server, 'dig' and 'ping' succeed while 'nslookup' fails

  - by einpoklum

  I installed dnsmasq on a machine of mine (It's a Kubuntu 12.04 LTS), backed only by /etc/hosts (no connection to the Internet until later). Now, if I dig mymachine, I get 192.168.0.1, but if I try to nslookup mymachine, I get: >> connection timed out; no servers could be reached Tried also nslookup mymachine.mynicedomain.org - didn't work either. pinging (Edit:) succeeds. This happens both on the server machine itself and on other machines on the network. How can I the DNS lookups to work? What problem is preventing nslookup from succeeding? Additional Information In the server's /etc/hosts: 192.168.0.1 mymachine In the server's nsswitch.conf: hosts: files mdns4_mininal [NOTFOUND=return] dns mdns4 (admittedly, this is a bit weird; but I also tried: hosts: files dns instead, with the same effect) In resolv.conf (which is generated by dnsmasq): nameserver 127.0.0.1 search mynicedomain.org In the server's /etc/hosts.allow: domain: ALL In the other machines' /etc/resolv.conf (this is set by the DHCP client): nameserver 192.168.0.1 search mynicedomain.org Relevant netstat output on the server: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 192.168.0.1:53 0.0.0.0:* LISTEN Finally, here's the ipconfig output from one of the client machines on the network (running Windows 7): Connection-specific DNS Suffix . : mynicedomain.org Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection Physical Address. . . . . . . . . : 12-34-56-78-9A-BC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.50(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Sunday, October 20th 2013 16:20:25 Lease Expires . . . . . . . . . . : Sunday, October 20th 2013 18:20:24 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Notes: May be related to this question.

  Read the article

• Malicious program changing my DNSs

  - by julio.alegria

  Some weeks ago I started having problems with my internet connection, it was extremely slow and suddently some websites (specifically gmail, facebook, youtube and twitter) started failing to connect, while the rest connect normally. Some days after, those same websites started showing me a message in portuguese: "Nova atualização disponível" whenever I tried to connect and a .exe file started downloading ("internet_update.exe" or something like that). That's when I freaked out! It was definitely a virus or something like that, but it was really weird because I never had a problem like that (I run Linux). So I turned on my old PC (running Windows XP) and it turned out it had the same problem! the same message was showed whenever I tried to connect one of those specific websites, while the rest loaded without problems. Even in my Android smarthphone the same message was showed. So it was obvious that the problem was not in a particular machine but in the router itself. So I started googling and I found some information, unfortunately I only found some in spanish, so I will make you a short summary: It is a new banking trojan developed specifically to infect and collect information from Brasilian banks. Apparently now it has expanded to Argentina and Peru. So how does it work? It spreads through social networks (videos, links, ...) and then it "takes control" of your internet connection by changing the values of your DNSs. More specifically, it changes the Primary DNS to one of this IPs: 108.170.13.38, 66.7.216.122 or 63.143.43.154 and the Secondary DNS to 8.8.8.8, this secondary DNS is actually the Google Public DNS, and it is configured this way so that your internet connection continue working properly and the user does not notice anything. The important part here is that because no download or install has been made in your machine, no antivirus will notice any change. After your DNSs have been changed, the trojan controls every single website you connect to and this way they steal your bank information. So after reading about this I accesed to my router and I restored my Primary and Secondary DNSs to their proper values, but one day after I had the same problem again. This is actually a 50% warning post - 50% help me! post. So, here comes the question: Is there any possible way to prevent my DNSs of being changed?

  Read the article

• ArchBeat Link-o-Rama for 11/18/2011

  - by Bob Rhubart

  IT executives taking lead role with both private and public cloud projects: survey | Joe McKendrick "The survey, conducted among members of the Independent Oracle Users Group, found that both private and public cloud adoption are up—30% of respondents report having limited-to-large-scale private clouds, up from 24% only a year ago. Another 25% are either piloting or considering private cloud projects. Public cloud services are also being adopted for their enterprises by more than one out of five respondents." - Joe McKendrick SOA all the Time; Architects in AZ; Clearing Info Integration Hurdles This week on the Architect Home Page on OTN. OIM 11g OID (LDAP) Groups Request-Based Provisioning with custom approval – Part I | Alex Lopez Iin part one of a two-part blog post, Alex Lopez illustrates "an implementation of a Custom Approval process and a Custom UI based on ADF to request entitlements for users which in turn will be converted to Group memberships in OID." ArchBeat Podcast Information Integration - Part 3/3 "Oracle Information Integration, Migration, and Consolidation" author Jason Williamson, co-author Tom Laszeski, and book contributor Marc Hebert talk about upcoming projects and about what they've learned in writing their book. InfoQ: Enterprise Shared Services and the Cloud | Ganesh Prasad As an industry, we have converged onto a standard three-layered service model (IaaS, PaaS, SaaS) to describe cloud computing, with each layer defined in terms of the operational control capabilities it offers. This is unlike enterprise shared services, which have unique characteristics around ownership, funding and operations, and they span SaaS and PaaS layers. Ganesh Prasad explores the differences. Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level Oracle ACE Director Andrejus Baranovskis describes "how jbo.doconnectionpooling = true and jbo.txn.disconnect_level = 1 properties affect ADF application performance." Exploring TCP throughput with DTrace | Alan Maguire "According to the theory," says Maguire, "when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput."

  Read the article

• How to disable "N" Wireless Mode RTL8192 (Thinkpad Edge 15 Core i5) in natty

  - by Gustavo Rubio

  I've seen many owners of thinkpad edges which are supossed to be linux-friendly having problems with wireless adapter. I've found several links inside askubuntu and in ubuntuforums which have a lot of work-arounds for those problems, mine seems to be wierd though. I use my laptop on both my office and at home. At home I have a router which is A/B/G and here at home the wireless connection works just fine, using a WEP key. But in work I have a B/G/N wireless router and it doesn't work, my guess is that this adapter works with N modes but somehow this is buggy in the bundled driver in natty. I've tried to disable the "N" mode in the router but that didn't work. Later I went to realtek website, downloaded their driver and compiled myself, kinda seems to work most of the time but sometimes some websites keep trying to load or load just parts of it and images start to look like their links are broken and so on, much like what you get when you were loading a page and suddenly the connection is lost. This problem, as I said, is only using the realtek driver from their website. Dmesg gives me this a lot of these: [ 5869.049454] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5 [ 5879.240563] DHCP pkt src port:68, dest port:67!! So I thougth I might as well switch back to the original driver which seems to work just fine on A/B/G wireless networks but not on N networks so if anybody knows how to disable that mode from within the driver please let us know :) Thanks in advance! PS: I do found a link to a similar question and it was answered but let me remind you I'm NOT using the intel version of wireless for my thinkpad but the realtek (RTL8192SvB)

  Read the article

• Annex-A vs Annex-B ADSL splitters

  - by Odys

  While trying to improve our Adsl connection, I found that we use a splitter that is from an unknown ventor and have no clue whether is for AnnexA (PSTN) or AnnexB (ISDN) line. Is it possible that somebody used the wrong splitter and just because it connected nobody ever cared? We have an ISDN line but the splitter used is blank. I am not really sure if it is AnnexB. Would it be possible to use an AnnexA filter over an ISDN line (even with that much signal loss)? (I am posting here because this is about our connection to the rack, I'm not sure if there is a more proper SExchange site)

  Read the article

• What is the proper way to install the 3.4 kernel?

  - by Marcelo Ruiz

  Kernel 3.2 has an annoying error for my wireless card (rtl8192se-b) that makes the connection drop and/or prevents the card to make a connection to the wireless router. Dealing with it was very frustrating until I found out the bug was corrected in 3.4. I downloaded: linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb and installed with: sudo dpkg -i * Now the wireless works fine, but I have two problems that cannot solve. The first one is minor: plymouth would not start at all. But if I boot with the 3.2 kernel it works fine. The second one is serious: sometimes the computer won't shut down or reboot. The X server terminates but the computer shows part of my grub background and will stay there forever using 100% of the CPU. I have a Toshiba Qosmio with an Core i7 and nvidia graphic card (using nvidia-current). During one shutdown, I briefly read a message that said that the virtualbox module couldn't be unloaded from the kernel. I tried to solve this by removing and purging virtualbox and installing it back. I don't see the message anymore, but sometimes the computer won't shutdown nor reboot. Am I missing something to properly configure the new kernels? Thanks!

  Read the article

• Localhost working fine with executing php code except mail function.

  - by Radheshyam Nayak

  i tried executing the mail() and got the following error "Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set() " but SMTP and smtp_port are both set in php.ini more ever other codes are working fine with localhost. disabled or/and added exception to firewell no result.... tried telnet localhost 25 error:could not connect to localhost port 25:connection failed..... Thunderbird my mail client says:could not connect to server localhost the connection was refused.... php.ini [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = localhost smtp_port = 25 running mercury mail server in xampp... previously working fine but now not working..

  Read the article

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• Problems to connect Java visualVM to a EC2-instance

  - by kasten

  I'm trying to profile a AWS EC2 instance via visualVM. The instance is in a securitygroup which allows all connections and i'm runing jstatd with a grant codebase "file:${java.home}/../lib/tools.jar" { permission java.security.AllPermission; }; policy on it. When i try to connect from my local machine with visulVM nothing happens. When i use jps i get the following response $ jps -l -m -v rmi://ec2-xxx-xxx-xxx-xxx.compute-1.amazonaws.com Error communicating with remote host: Connection refused to host: xxx.xxx.xxx.xxx; nested exception is: java.net.ConnectException: Connection timed out But i can ssh into the instance and use jps locally. Has anyone a pointer in which direction i can debug further?

  Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >