Search Results

Search found 24943 results on 998 pages for 'scientific linux'.

Page 245/998 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• For virtual machines, when SMP is available on the host, should guest also have SMP setup?

  - by supercheetah

  I'm trying to find out the best "bang for my buck" so to speak in regards to virtual machines, and SMP. I have an Intel Core 2 Duo, which of course has two cores and the VT extensions, and I'm running Ubuntu Linux (host) on it with VirtualBox, which has Windows Vista (guest). Currently I've got the guest machine setup for two processors to give Windows a chance to manage its own parallelism, but I'm not certain that it's any faster. I've tried it with just one processor, but it's hard to tell if it's any better. Any thoughts? Should the guest have two processors setup?

  Read the article

• Nearest PC equivalent to Mac Target Disk Mode?

  - by username

  Mac firmware has a special boot mode that allows you to offer its internal hdd to another computer as an external disk (you just connect the two machines via an IEEE 1394 cable). Only the second machine needs a functioning OS installed. Any good suggestions for something similar on the PC side of things? Block level access isn't important to me, I'd just like to be able to copy files off it. It doesn't matter to me if it uses Ethernet, IEEE 1394, or wifi - I just like having a quick way to access files on a client PC. Is there any single-purpose Linux distro specially designed to do this? It'd be nice to have something super simple, quickbooting, and small that I could install on a USB drive. I used to use Knoppix, but it's overkill as a Target Mode replacement.

  Read the article

• DPMS, keep screen off when lid shut

  - by Evan Teran

  I have a laptop running linux. In my xorg configuration, I have DPMS setup so that the screen automatically turns off during several events. In addition to that I have to the following script tied to ACPI lid open/close events: #!/bin/sh for i in $(pidof X); do CMD=$(ps --no-heading $i) XAUTH="$(echo $CMD | sed -n 's/.*-auth \(.*\)/\1/p')" DISPLAY="$(echo $CMD | sed -n 's/.* \(:[0-9]\) .*/\1/p')" # turn the display off or back on export XAUTHORITY=$XAUTH /usr/bin/xset -display $DISPLAY dpms force $1 done Basically, this script takes one parameter ("on" or "off") then iterates through all of my running X sessions and either turns on or turns off the monitor. Here's my issue. When I close the lid of the laptop, the screen goes off as expected, but if a mouse event occurs (like if something bumps into the table...) then the screen turns back on even though it is closed (I can see the light through the side of the laptop). Is there a way to prevent the screen from turning on during a mouse event if the lid is closed?

  Read the article

• Which FLOSS text editor is most like kwrite without being KDE-based?

  - by darenw

  Among text editors on Linux, I usually prefer KWrite. I like that I can quickly turn on/off line numbers and line wrap in the View menu. Other settings are easy to change. Other text editors I've used in the past, such as Gnome's gedit, bury line numbering and wrapping checkboxes deeper into the menu system, making it more distracting to change while concentrating on real work. However, KWrite is a KDE app. On Ubuntu it drags in over a dozen other packages, which I suspect I don't really need. Why would a text editor need all that? It's slower to start up than some other editors I've tried. I'm also trying to run an all-gnome system w/o any KDE, just to see how far I get with it. So, what GUI text editor isn't KDE-based, has few dependencies and quick start-up, easy to change line wrap and numbering, and general similarity to KWrite? What comes closest?

  Read the article

• Calculate data transferred in a local LAN

  - by ramdaz

  How do you calculate the data flown between a computer and the gateway computer. I have a Linux router/gateway running IP Tables which routes internet traffic in a LAN. I have individual users with IP/MAC Address mapped who access Interet through the gateway computer. I would like to find out the traffic utilized by individual users. Is it possible for us to find out what kind of traffic was HTTP, SMTP, FTP etc. Is it also possible to pool the information on hourly basis, and get specific info so that I can store information in a database? I have heard of IP Accounting? Is that the right way

  Read the article

• Ask a DNS server what sites it hosts - and how to possibly prevent misuse

  - by Exit

  I've got a server which I host my company website as well as some of my clients. I noticed a domain which I created, but never used, was being attacked by a poke and hope hacker. I imagine that the hacker collected the domain from either hitting my DNS server and requesting what domains are hosted. So, in the interest of prevention and better server management, how would I ask my own DNS server (Linux CentOS 4) what sites are being hosted on it? Also, is there a way to prevent these types of attacks by hiding this information? I would assume that DNS servers would need to keep some information public, but I'm not sure if there is something that most hosts do to help prevent these bandwidth wasting poke and hope attacks. Thanks in advance.

  Read the article

• Unable to write into character device file in Ubuntu

  - by Surjya Narayana Padhi

  I just written a linux character driver. I created one character device file named X. I can see that file in /dev folder. Now I want to do some read/write operation into this file. I opened the filed in VI editor and write some text into it. I used :wq and exited. It didn't show any error. Now when I do cat on that same file I am not able to see any content. I tried it several times. The same situation. Please let me know If I am doing something wrong....

  Read the article

• How difficult is it to setup a mailserver?

  - by Jacob R

  I want a secure mail solution, as I am looking to move away from Google and other parties looking into my private data. How much of a PITA is it to setup my own mailserver? Should I go for an external provider with a good privacy policy and encrypted data instead? I have a VPS running Debian (with a dedicated IP + reverse DNS), and I'm a fairly capable Linux administrator, having setup a couple of webservers, home networks, and looking over the shoulder of sysadmins at work. The security I currently have on the VPS is limited to iptables and installing/running the bare minimum of what I need (currently basically irssi and lighttpd). When setting up a mail server, is there a lot of stuff to take into consideration? Will my outgoing mail be marked as spam on other servers if I don't implement a number of solutions? Will reliable spam filtering be difficult to setup? Can I easily encrypt the stored mail?

  Read the article

• Apache is running; however, it reports that it is not, and it will not restart.

  - by solo

  Apache is running; however, it reports that it is not, and it will not restart. # /etc/init.d/httpd status httpd.worker is stopped # /usr/sbin/lsof -iTCP:80 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME httpd.wor 1169 root 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1211 daemon 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1213 daemon 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1215 daemon 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1352 daemon 3u IPv6 2974 TCP *:http (LISTEN) #/etc/init.d/httpd restart Stopping httpd: [FAILED] Starting httpd: [Wed Mar 24 10:33:51 2010] [warn] module proxy_ajp_module is already loaded, skipping (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [FAILED] OS: Linux DISTRO: CENTOS 5 Restarting the server didn't help, nor did killing apache and starting it. Any idea what is causing this inconsistency?

  Read the article

• How can I send a Wake on Wireless LAN (WoWLAN) / Wake on Demand request manually?

  - by pioto

  This is similar to, but not the same as, http://serverfault.com/questions/1721/is-wireless-wake-on-lan-possible. I know it is supposed to be possible. The question is, how do I do whatever the AirPort Basestation will do? All I can find so far is that supposedly I need to send something with Wireless Multimedia Extensions (WMM): Basically, I want to be able to wake up my Mac Mini remotely, probably using my Linux laptop. Does anyone know of a tool to do this? Basic Wake on LAN tools do not seem to be the right thing. I don't need the Sleep Proxy Service bit, because I already know the MAC address of the system I want to wake up.

  Read the article

• Ubuntu to Ubuntu VNC over SSH tunnel

  - by rxt

  I have a Linux Ubuntu desktop at home, ssh enabled, vnc server installed, router rule configured. It all works, and at home I can connect via the local network from my Mac. From the outside I can login via ssh. I've configured putty as follows: session: host name and port number connection ssh tunnel: forwarded ports: L5900|192.168.0.23 the local address is: 192.168.1.45 When I make the connection I can login to the remote machine. Then I open Remote Desktop Viewer. I click connect protocol: vnc host: ? use host as ssh tunnel: ? I don't know what to use for the last two options. Which ip-addresses should I use?

  Read the article

• Apache - setting up a subdomain

  - by Adam

  I'm having trouble getting a subdomain working for an Apache Linux Install. Following is what I've configured: DNS: connect.goneglobal.com. CNAME 54.251.35.112 Apache httpd.conf: <VirtualHost *:80> DocumentRoot /var/www/html/connect.goneglobal.com ServerName connect.goneglobal.com </VirtualHost> restart httpd - this ip is registered to this server - works for other sites on this apache. (first time I've tried a subdomain). Appears the issue is with DNS potentially and it doesn't seem to get to the site. Note: I have an index.php in the Documentroot. Note: there is an A record for goneglobal.com. which goes to a different hosting provider. thx

  Read the article

• Running make for Nginx throws a “multiple target patterns” error

  - by Justin Meltzer

  When I run make inside my installed nginx directory I get the output: make -f objs/Makefile make[1]: Entering directory `/home/ec2-user/nginx/nginx-1.2.4' objs/Makefile:110: *** multiple target patterns. Stop. make[1]: Leaving directory `/home/ec2-user/nginx/nginx-1.2.4' make: * [build] Error 2 I am on an Amazon Linux AMI. The steps I took from the beginning was wget /path/to/nginx/tarball tar xvf nginx-1.2.4.tar.gz cd nginx-1.2.4 ./configure --prefix=/nginx --a-bunch-of-other-options Then I ran make. Also I installed make by running sudo yum install make Please let me know if there's any other information I should be providing.

  Read the article

• Why do strace/truss sometimes 'fix' stuck processes?

  - by Emmel

  Sometimes you have a stuck process that's been stuck for a while, and as soon as you go to poke at it with strace/truss just to see what's going on, it gets magically unstuck and continues to run! So from merely 'observing' these programs have some impact in the running of the stuck programs .. what's happening here? Did strace (I guess via ptrace(2)?) send a signal, causing the program to cease blocking, or such? I've seen this several times -- most recently on Linux RHEL 4 (and a Perl script mucking with processes and doing some network IO in that case), but in a few other contexts as well. Unfortunately, I can't reproduce this, as it times to happen ... in times of crisis. But my curiosity remains. :-) Any elucidation appreciated.

  Read the article

• Is Centos legal?

  - by Jim B

  I'm trying to figure out if centos is legal (or simply grey). Here's what makes me wonder: They seem to go to great pains not to mention that they are based on redhat in the FAQ they mention a policy about using the redhat trademark, but the link no longer exists. When installing it it's not hard to find a lot of redhat code. I don't bother much with the linux world anymore but I had a client that was wondering about it as his auditors picked up on it and wanted to know where his license was.

  Read the article

• How to setup a simple self-hosted dynamic DNS server

  - by Cerin

  I have a small internal network of physical machines running hypervisors, which in turn run several KVM Ubuntu virtual machines. How would I setup an internal dynamic DNS server so that when I run a script to create a new virtual machine, that VM could automatically register itself in the DNS server? Bind seems to be the standard DNS server for Linux, but it seems designed for a much more "static" DNS model. Dynamically updating this would require a complicated script that would have to SSH into the DNS server, edit configuration files, and then restart the server. This doesn't seem like a very elegant solution. Are there better options? I saw a similar question, although they're asking for a solution for a public setting on Amazon. My servers are entirely private, and I don't want to rely on an external VM host or Dynamic DNS provider.

  Read the article

• Symlink - Permission Denied

  - by John Smith

  I'm facing an interesting problem with plenty of Permission Denied outputs when using SymLinks Linux: Slackware 13.1 Directory with Symlink: root@Tower:/var/lib# ls -lah drwxr-xr-x 8 root root 0 2012-12-02 20:09 ./ drwxr-xr-x 15 root root 0 2012-12-01 21:06 ../ lrwxrwxrwx 1 ntop ntop 21 2012-12-02 20:09 ntop - /mnt/user/media/ntop6/ Symlinked Directory: root@Tower:/mnt/user/media# ls -lah drwxrwx--- 1 nobody users 1.4K 2012-12-02 19:28 ./ drwxrwx--- 1 nobody users 128 2012-11-18 16:06 ../ drwxrwxrwx 1 ntop ntop 320 2012-12-02 20:22 ntop6/ What I have done: I have used chown -h ntop:ntop on the ntop directory in /var/lib Just to be sure, I have chmod 777 to both directories Permission denied actions: root@Tower:/var/lib# sudo -u ntop mkdir /var/lib/ntop/test mkdir: cannot create directory `/var/lib/ntop/test': Permission denied Any ideas?

  Read the article

• "Target the specific user you will be using and assign it user id 0/group 0"

  - by Jeremy Holovacs

  I am trying to virtualize an Ubuntu machine using VMWare vCenter Converter, but ran into permissions issues. I followed the instructions of part 1 and 2 on this page but when I got to "For Ubuntu operating systems further configuration is needed" I started running into trouble. I'm decent at Linux, but I'm not an experienced sysadmin. How do I Target the specific user you will be using and assign it user id 0/group 0? How do I Ensure that you also still enable Allow root to ssh even though you are not using the root account? Thanks for your help.

  Read the article

• Segfault with rtorrent on Debian Lenny

  - by digital

  Hi, My debian lenny server keeps segfaulting with rtorrent, it happens once every 24 hours. Libcurl has been recompiled to the latest version and it still seems to happen. I'm not the best when it comes to linux server admin but if you require more info about the system I'll try and get it for you. lib/rtorrent are 0.8.5/0.12.5 Any help would be appreciated as I'd like rtorrent up 24/7 Caught Segmentation fault, dumping stack: 0 rtorrent [0x439686] 1 rtorrent [0x43e06a] 2 /lib/libc.so.6 [0x7f73ce780f60] 3 /usr/lib/libcurl.so.4 [0x7f73d04f4431] 4 /usr/lib/libcurl.so.4 [0x7f73d04f47da] 5 /usr/lib/libcurl.so.4(curl_multi_remove_handle+0x341) [0x7f73d050acb1] 6 rtorrent [0x480221] 7 rtorrent [0x482915] 8 /usr/local/lib/libtorrent.so.11 [0x7f73d02b1f95] 9 /usr/local/lib/libtorrent.so.11 [0x7f73d02b1fea] 10 /usr/local/lib/libtorrent.so.11 [0x7f73d02b4cfc] 11 rtorrent [0x48058a] 12 rtorrent [0x439f49] 13 /lib/libc.so.6(__libc_start_main+0xe6) [0x7f73ce76d1a6] 14 rtorrent(_ZNSt8ios_base4InitD1Ev+0x71) [0x40ea99]

  Read the article

• Track IP Messenger's chatting by wireshark

  - by Kumar P

  We have Linux server ( RHEL 5 ), and some client machines ( Windows XP ) in local area network. We using server as proxy server. I am using squid proxy. My windows machines using internet by proxy. Now my client machines using IP messenger for chatting and sharing files with in local network. How can i trace what they are doing or chatting by ip messenger, from my server by wireshark packet sniffer ? If i can't do it by wireshark , What will you give idea about it...

  Read the article

• When your field-terminating char appears within field values

  - by Jonathan Sampson

  I've had a very colorful morning learning the innerparts of Linux's sort command, and have come across yet another issue that I can't seem to find an answer for in the documentation. I'm currently using -t, to indicate that my fields are split by the comma character, but I'm finding that in some of my files, the comma is used (between double-quotes) within values: Jonathan Sampson,,[email protected],0987654321 "Foobar CEO,","CEO,",[email protected],, How can I use a comma to terminate my fields, but ignore the occurences of it within values? Is this fairly simple, or do I need to re-export all of my data using a more-foreign field-terminator?

  Read the article

• Can I send some text to the STDIN of an active process running in a screen session?

  - by Richard Gaywood

  I have a long-running server process inside a screen session on my Linux server. It's a bit unstable (and sadly not my software so I can't fix that!), so I want to script a nightly restart of the process to help stability. The only way to make it do a graceful shutdown is to go to the screen process, switch to the window it's running in, and enter the string "stop" on its control console. Are there any smart redirection contortions I can do to make a cronjob send that stop command at a fixed time every day?

  Read the article

• yum / rpm / make | When to use which one

  - by Saif Bechan

  I am new to Linux and am running CentOs. When I want to update or install certain software I came across three ways. Sometimes it's: yum install program rpm -i program.rpm wget program.tar.gz unpack ./configure make make install That last one is a real pain, esp when you come from windows where a program install is usually one click and then a nice guide. Now can someone please explain to me: Why are there so many different ways to do this? Which one do you recommend to use and why? Are there any other ways for installing programs?

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >