Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 246/1036 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

  • Auto-mount filesystems on boot fails (12.10)

    - by Joshua Pruitt
    I have a Compaq HP 8200 slim desktop running 12.10 with encrypted partitions (set up with the text-based installer). Everything's working fine, except... When I boot the computer, my /boot and /boot/efi directories refuse to mount automatically. I'm dropped to the root console, where I must enter 'mountall -v', and everything then continues on just fine. This was happening under 12.04. I've recently upgraded to 12.10, and the problem persists. Except now, in addition to /boot and /boot/efi not mounting, roughly 50% of the time /var will not be auto-mounted as well (and again, 'mountall -v' fixes allows me to boot and move on). I'm puzzled about this one. Running 'fsck' doesn't seem to do anything (the filesystems aren't damaged anyway). What can I try to solve this issue? Here's my /etc/fstab: http://paste.ubuntu.com/1338508/ Thanks in advance!!! Addendum: I have tried changing the entries in fstab from UUIDs to the actual devices, to no avail.

    Read the article

  • Ubuntu won't save my settings for thinkpad trackpoint

    - by serve.chilled
    I'm using Ubuntu 12.04 on a Thinkpad X200. To configure the trackpoint, I use "configure TrackPoint". Unfortunately I can't make Ubuntu saving my settings (concerning the sensitivity etc.). Whenever I reboot the computer, it's set to generic settings again. I already tried htorque's answer to a similar question and created a new udev-rule for the trackpoint-settings but it didn't helped. So, how can I make theses settings permanent?

    Read the article

  • How to set up a (relatively) secure kiosk on Natty?

    - by Tim
    I'm trying to get my application to be the only thing a user sees when the machine is powered on - like a kiosk, but a little more secure. Ideally, what I'd like to happen is this: At machine power-on, the user sees the Ubuntu splash image, then my app. While the app is running, the user can't get back to the desktop or a text login prompt via any keyboard shortcut. This is the (relatively) secure bit. When the user exits the app, the user sees a shutdown image, then the machine powers off. In particular, I'd like to configure things so that the user never sees the Gnome desktop on startup or shutdown. At the moment, I've configured a default user to be logged on automatically, with an autostart item which starts my app, but after the Ubuntu startup screen the user sees the Gnome desktop briefly before my app is started. When the app is exited, the user is taken back to the Gnome desktop and has to shut the machine down manually. Also, because of time constraints, I can't really start over with a different window manager. Is there an easy way to configure all of this?

    Read the article

  • HDMI video output not working for external monitor

    - by user291852
    I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

    Read the article

  • MySQL port forwarding

    - by Eduard Luca
    I am trying to help a colleague to connect to my MySQL server. However the situation is a bit special, and here's why (let's call him person A and me, person B): Person A has a PC, on which he has a virtual machine, which is in the same network as the actual PC he's running. However person A is also in the same network with person B (a different network). I want the site that lives on A's VM to be able to connect to the MySQL server on B's PC. For this I've thought a port forwarding would be appropriate: from ip-of-person-A:3306 to ip-of-person-B:3306. This way the site would connect to the IP of the PC it's living on (not the VM), which would forward to A's MySQL. I've seen several examples of port forwarding, but I don't think it's what I need, from what I've seen, it's kind of the opposite. So would something like this be achievable?

    Read the article

  • Getting a Conexant CX23885 TV Capture Card working

    - by Benny
    I'm new to Linux, and am trying to get my Capture Card working on 11.04. The only command that I know to run to find out any information is lspci, which tells me that I have 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) I've looked at using Me TV, but haven't worked out how to configure it for my card, or what I need to do to get it running. I'm not fussed on what software I use to run the Capture Card, but I've currently got only Me TV installed. Edit: When I run tvtime, I get the following errors: videoinput: Cannot open capture device /dev/video0: No such file or directory mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Line, mixer volume and mute unavailable. Segmentation fault

    Read the article

  • Make it so you can't stop command with CTRL+C

    - by Xero
    So, I was playing some Zork 1, and I went to copy some text to show a friend of mine I accidentally forgot to hold the shift key when pressing CTRL+C. This stopped the command and I lost my Zork data, is there some sort of "helpful" tip out their that I can to prevent from stopping the command when press the keys CTRL+C? Note that I'm running the game zork via Terminal (emulator), I installed it with these steps: http://www.eugenemdavis.com/playing-zork-linux-frotz

    Read the article

  • How do I theme the maximized window buttons with Unity?

    - by Dylan McCall
    I use a custom Gtk theme along with the default Ambiance window controls. Using my theme, the Unity panel shows its very ugly default buttons when my window is maximized. Since I have the same window theme, I am assuming this comes from the Gtk theme. I tried copying and pasting a few things from Ambiance's gtkrc, but nothing has stuck so far. What must a theme author do to gain pretty looking window buttons in Unity's panel?

    Read the article

  • "io: postinst-must-call-ldconfig" when creating a package

    - by egarcia
    I'm trying to create an ubuntu .deb package for the (pretty awesome) Io Language. I am not the developer of that language, so I'm not familiar with its sourcecode yet. This is my first attempt at creating a .deb file. In order to create the .deb, I'm following these instructions: http://www.webupd8.org/2010/01/how-to-create-deb-package-ubuntu-debian.html So far I've been able to create a .deb file (io_2010.06.01-1_amd64.deb) and a changes file (io_201.06.01-1_amd64.changes). I'm using lintian to check the changes file, and it reports an issue I don't know how to resolve: $ lintian -Ivi io_2010.06.01-1_amd64.changes ... (lots of messages) I: io: no-symbols-control-file usr/lib/libiovmall.so I: io: no-symbols-control-file usr/lib/libgarbagecollector.so I: io: no-symbols-control-file usr/lib/libbasekit.so E: io: postinst-must-call-ldconfig usr/lib/libiovmall.so N: N: The package installs shared libraries in a directory controlled by the N: dynamic library loader. Therefore, the package must call "ldconfig" in N: its postinst script. N: N: Refer to Debian Policy Manual section 8.1.1 (ldconfig) for details. N: N: Severity: serious, Certainty: certain N: N: Removing /tmp/OYuNShEHYz ... I've read the debian manual 8.8 section. I think I understand what the problem is (I need to make sure that ldconfig is invoked "somewhere", possibly on a place called "posinst") but I don't know how to resolve it (i.e. where this "posinsts" file is and how should I change it). The current way of installing Io in Ubuntu is basically running sudo make install and then sudo ldconfig. Maybe the makefile should be modified so ldconfig is called from it? I don't know. Thanks a lot.

    Read the article

  • How do I get wireless working on a Dell Inspiron 510m?

    - by user17449
    Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

    Read the article

  • can't access SAMBA shares on UBUNTU-server from other computers

    - by larand
    Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

    Read the article

  • Trouble launch byobu with custom windows.NAME file

    - by Brendan Piater
    Apologies if the solution is obvious but I'm stumped! I want to launch byobu from within my Gnome 3 desktop environment on 12.04 but it's not working for me as yet. Here's what I have: created a windows list file ~/.byobu/windows.mrb then tried to launch byobu from within the gnome terminal with: $ BYOBU_WINDOWS=mrb byobu But it gives me the default windows list, NOT my windows list. I followed these instructions from the wiki: http://goo.gl/omgl8 Here is a sanitised version of my windows.mrb file: screen -t local bash screen -t name1 ssh xxx@xxx screen -t name2 ssh root@xxx screen -t name3 bash Appreciate the time and effort. Cheers Brendan

    Read the article

  • installing ubuntu on SSD

    - by kunal
    Going to install Ubuntu 10.10 on new intel x25M 80GB SSD. It will be fresh install. I have been googling for past few days and getting overwhelming articles/blogs/Q&As. One particularly very useful being: Optimize for SSD (I could not post other links as i dont have enough credits) But with so many suggestions and differences of opinions (on different links) this simple OS install process seems to be daunting task to me and I really want to stick with ubuntu (although have used for very short period of time). Can someone help me by answering few questions (yes they are repeated as i couldnt comprehend the answers elsewhere) which file system (ext2/3/4 or something else)? (consider SSD life) can it be changed after installation? should i partition the disk? (as we do in traditional HDD) for now, no plan of dual booting. Only ubuntu will live on scarce space of 80GB SSD. i have 2 GB RAM, should i still allocate swap space (if i dont allocate swap space, can i still hibernate the machine)? will swap space impact SSD life? should i consider putting additional 1GB RAM to avoid swap space? Linux experience - absolute novice intended usage - heavy browsing, programming, regular video/music and some other non-CPU/RAM-intensive programs. will backup big files to an external hard drive. laptop config - 3 yr old vaio, core2 duo, 2GB RAM Please pardon the repetition and i really appreciate anyone helping me getting started with ubuntu.

    Read the article

  • Screen is very dim on an Acer Aspire 6920Z

    - by Justin
    I've been trying to figure this out for a week now, my laptops screen is on and working but you cannot see whats on the screen without shining a flashlight at it. I'm using a spare monitor by the VGA port right now to be able to use this laptop, which is kinda a pain. Been reading around a bit about this problem and it seems to be a common-ish problem it seems. I've tried to change the brightness which doesn't help whats so ever. It just happen one day after I turned off the laptop for the night. The screen flashes on for a bit at start up, then goes completely dim. Anyone with this problem and find a fix? You can search up this computers spec by the name/model in the title if you need hardware info. I never had this problem with the old Ubuntu 10.04.

    Read the article

  • Getting Wacom Bamboo Pen + Touch pressure sensitivy in GIMP

    - by Bart van Heukelom
    I've installed my Wacom Bamboo Pen + Touch (CTH-460) in Ubuntu (at least on one system, not another) and the pen works well for controlling the mouse cursor. However, I can't get pressure sensitivity to work in GIMP. I have 4 extra devices in the input devices settings screen now, two of which are the pen and eraser. I've set them both from Disabled to Screen, and left the default settings intact. However, after saving I still don't see any pressure options in the brush tool's options. I've also tried setting the mode to Window instead, but it makes no difference regarding pressure sensitivity. There are no other modes. The pressure works out-of-the-box in Blender (grease pen) so it must be something in GIMP. What can be wrong? Why don't the options appear? How can I debug this?

    Read the article

  • update manager is not woring Failed to download repository information

    - by harry
    My update manager is not working and showing this message Failed to download repository information Check your Internet connection. W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found , W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. Pleas help Thank you for your time.

    Read the article

  • Unity spontaneously logs out in Ubuntu 12.04

    - by Yang
    This started happening after I upgraded from 11.10. I'm running on a Latitude 13 laptop with an Intel Mobile 4 Series Chipset Integrated Graphics Controller (not Nvidia) - no proprietary drivers. It seems to happen under load, though I can't tell if the load is caused by something with this problem or by a program I'm running. I'd like to try nailing this problem. Ideally I don't want to switch to something else (at least not before knowing that that's the only way out and that it's specific to Unity and not, say, X).

    Read the article

  • Mouse scroll issue after kernel build

    - by Anish S Kumar
    I have a Intel Cedar Trail netbook. For graphics to work, i had to build kernel 3.1 with the drivers. I followed the steps in this document After doing that, now my graphics is fine, but my mouse scroll does not work. Is that because I have not build the kernel properly? Have i missed selecting some options in the kernel compile menu? It will be nice if someone can help me. Also my wacom bamboo tablet is not recognized, i have installed the xserver-xorg-input-wacom drivers.

    Read the article

  • set left handed mouse, then wacom stylus buttons switch too

    - by begtognen
    I'm using Lubuntu 12.04. I can set my mouse (basic usb mouse) to left hand (i.e. switch the left and right mouse buttons which is all I need) by going into Preferences / Keyboard and Mouse. However, it changes my Wacom stylus, so that when the tip touches the tablet it acts like the right mouse button, making it impossible to draw. Is there a way to have both happen at once? The stylus buttons working in right handed configuration, while the mouse works in left handed configuration? Thanks for any help/suggestions.

    Read the article

  • Why is my fan constatnly blowing in Ubuntu?

    - by Derfder
    I have installed Ubuntu 13.04 (64-bits) alongside Windows 7 on different partition on my second desktop. It's working nice. I have updated everything. However, I have problems with my fan. It's blowing non-stop and very fast(loud). I haven't these problems in Windows 7 where it works nicely. How to update drivers for my fan or something else? My desktop is: HP Pro 3410 Microtower PC. Graphic card: AMD Radeon HD 6570 Board: 2A9C 1.1 Bus Clock: 133 megahertz BIOS: American Megatrends Inc. 6.14 11/05/2010 Processor: 3,20 gigahertz Intel Core i3 550 DRIVERS I HAVE TRIED FOR MY GRAPHIC CARD: I have tried these drivers so far: xserver-xorg-video-ati, version: 1:7.1.0-0ubuntu2 fglrx Version: 2:9.010-0ubuntu3 fglrx-updates Version 2:9.012-0ubuntu1 But the fan is still blowing like a maniac. I have tried to install Linux Mint 15 previously and I have had the same problems with the fan. Any idea how to fix it?

    Read the article

  • passing a font as an argument to a script

    - by josinalvo
    I am trying to use osdSH for notifications. It has a 'font' parameter that receives a curiously formed string. From the man: -f -font Set font (Default: -*-lucidatypewriter- bold-*-*-*-*-240-*-*-*-*-*-*) The manual does not comment on the arguments passed (I assume each * represents a possible argument). It would seem that this notation is (or has someday been) standard, but I've not been able to find anything about it. what is the standard ? what argument specifies letter size ?

    Read the article

  • How to unmount a virtual cd/dvd in Ubuntu 11.1o

    - by P J Reil
    I'm new to Ubuntu 11.10 and have absolutely no idea what I'm doing. I don't now how but in downloading and fooling around with a virtual cd/dvd program I seem to have inadvertently installed it. I had to shut down my computer for a while and when I re booted it all my files and my setup was gone. I have a brand new 11.10 setup with all the programs installed that I originally had but no files or bookmarks etc.. I'm not sure, but I think I'm running in a virtual cd/dvd. I don't know how to determine if I am or not and can't boot up in my original setup. Can anyone help me?

    Read the article

  • BTrFS subvolume / snapshot question

    - by bumbling fool
    I think I'm having difficulty fully understanding subvolumes and snapshots. The /home partition is btrfs. I want to create a "backup" snapshot of /home/user (for example) but user has existed for years (previously ext4 btrfs-convert). I believe you can only make a snapshot of a subvolume. I checked and there are no "default" subvolumes already present. 1) Is there another way for me to backup /home/user other than creating a subvolume /home/user2 and copying everything from user to user2 in order to snapshot it?

    Read the article

  • *Un*installing with Ubuntu Software Center (Centre) doesn't work on 64-bit 12.04.1

    - by likethesky
    Not sure if I'm doing something wrong, or if the .deb package I'm installing is broken in some way (I've built it, using NetBeans 7.2), or if indeed this is a bug in Software Center. When I install this particular 32-bit .deb on Ubuntu 10.04 LTS--all updates applied--(where it was built), GDebi shows it and has an 'Uninstall' button next to it. So it works fine to uninstall it there, via the GDebi GUI. However, when I install it on 12.04.1 LTS--all updates applied--it installs fine, but then does not show up in Ubuntu Software Center as available to be uninstalled. No combination of searching finds it. However, I can from the command line, do sudo apt-get purge javafxapplication1 and it finds it and deletes it. The same thing happens when I build a 64-bit .deb and attempt to install it to the same (64-bit AMD) or a different 64-bit Ubuntu 12.04.1 system. So it seems to be isolated to this NetBeans-generated .deb and the 64-bit AMD build (though I haven't tried it on a 32-bit 12.04.1 install yet). These are all on VirtualBox VMs, btw, if that matters. Any way to 'clean up' my Software Center and see if it's something I've done to get it in this state? Could this behavior be due to how this particular .deb has been built? (It doesn't have an 'Installed-Size' control field, so I do get the "Package is of bad quality" warning when I install it--which I do by clicking 'Ignore and install' button.) If you want all the gory details about why this happening--a bug has been reported against NetBeans for this behavior here: http://javafx-jira.kenai.com/browse/RT-25486 (EDIT: Just to be clear, the app installs fine, runs fine, all works as intended--I just can't get that 'bad package' message to go away, and now... I also can't uninstall it via Software Center, but rather, need to use sudo apt-get purge to uninstall it, after it installs. /END EDIT) Thanks for any pointers. I'm happy to report this as a bug against Ubuntu Software Center/Centre too, if that's what it seems to be, just tell me where to do so (a link). I'm a relative Ubuntu, NetBeans, and JavaFX newbie, though a long-time programmer. If I report it as a bug, I'll try it on the 32-bit build of 12.04.1 as well. Also, if I should add any more detail to the bug reported against NetBeans above, let me know--or feel free to add it yourself to the bug report above, if you would like. Thanks again!

    Read the article

  • /tmp shows 690 Mb full, actual size 72 K, Why?

    - by Ankit
    Why is /tmp diretory on my system showing 690 Mb full, whereas du -sh /tmp shows only 72K full. drwxrwxrwt 2 lightdm lightdm 4096 Aug 29 21:49 at-spi2 drwx------ 2 ankit ankit 4096 Aug 29 21:50 keyring-0JTfoY drwx------ 2 ankit ankit 4096 Aug 29 21:44 keyring-rChLLL drwx------ 2 root root 16384 Jul 22 02:10 lost+found drwx------ 2 ankit ankit 4096 Jan 1 1970 orbit-ankit drwx------ 2 lightdm lightdm 4096 Aug 29 21:50 pulse-2L9K88eMlGn7 drwx------ 2 root root 4096 Aug 29 21:44 pulse-PKdhtXMmr18n drwx------ 2 ankit ankit 4096 Aug 29 21:50 pulse-zR1TZUAZfmQW drwx------ 2 ankit ankit 4096 Aug 29 21:44 ssh-dlslOXOq2203 drwx------ 2 ankit ankit 4096 Aug 29 21:50 ssh-MrQQVRyy3316 -rw------- 1 ankit ankit 0 Aug 29 21:45 tmp0qnNG4 -rw------- 1 ankit ankit 0 Aug 29 21:50 tmpVvSMt6 -rw------- 1 ankit ankit 0 Aug 29 21:49 tmpy9Gadz -rw-rw-r-- 1 lightdm lightdm 0 Aug 29 21:44 unity_support_test.0 ankit@duster:/tmp$ df -h df: `/home/ankit/.gvfs': Transport endpoint is not connected Filesystem Size Used Avail Use% Mounted on /dev/sda1 79G 11G 65G 14% / udev 2.9G 4.0K 2.9G 1% /dev tmpfs 1.2G 868K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 220K 2.9G 1% /run/shm /dev/sda7 38G 690M 35G 2% /tmp /dev/sda5 93G 26G 63G 30% /home /dev/sda6 93G 1.6G 87G 2% /boot /dev/sda3 154G 69G 78G 48% /home/mount_150 ankit@duster:/tmp$ ankit@duster:/tmp$ ankit@duster:/tmp$ sudo du -sh /tmp/ 72K

    Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >