Search Results

Search found 13293 results on 532 pages for 'small ticket'.

Page 246/532 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• unable to properly execute binaries from PHP

  - by Lowgain

  I was building an app on a SUSE box, and had a binary called create_group for instance, which had a suid bit and allowed my PHP app to call exec('create group grpname'); and create a new group (there are others for users, etc). The binary was a small c script that calls setuid(0) and then runs the user creation stuff. This worked perfectly on the SUSE box I recently moved my project to Ubuntu and everything works fine except these binaries. I can run them from the shell and they work okay, but when I get the PHP app to run them it just does nothing. Is there anything Ubuntu would be doing differently that I'm missing?

  Read the article

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• Add a server between router and switch (production)

  - by Kossel

  I have a small office network basically like below, there are more router/pc connected in S1. As you can see, the router is doing job of DHCP, DNS. but now I wish to add a Linux server between R1 and S1, So I can monitor the network traffic and do other more advance server admin stuff. the whole office network is 192.168.1.x and people are using their computer everyday. What network configuration should the new Linux server have (both interfaces) in order to minimize the changes need in the network? tried to change R1 ip to 192.168.100.1 them add the server with FE0/0 192.168.100.1 and FE0/1 192.168.1.1 but looks cannot ping the original Router..

  Read the article

• Using Postgres on Volusion site

  - by Sean

  Okay, I apologize if this is so basic that I should know the answer, but I'm not sure where else to go for the solution. I would like to start a small store site using Volusion. I would like some custom ASP code to query data that I currently have in a Postgres database. I would like to be able to just move the database file(s) onto the Volusion server via ftp and access them from my store site (via the custom ASP). Do I need to install Postgres onto the server to do this, or can I just ftp my database file(s) and access them with the ASP code? I think I need to install Postgres, but would like to do this without such an installation if possible.

  Read the article

• Fast, reliable data transfers from/to China

  - by Nils

  We are a small company and we will need to transfer rather large amounts of data (10GB+ each time) between Europe and China in the near future. As many may have experienced, Internet connections to or from China can be rather unreliable and slow at times without any apparent reason. For example, while sending data to China via FTP generally works well, it can be painfully slow in the other direction. Currently, we are investigating new ways to have high transfer rates in both directions. So far we have tried: FTP (see above) FTP over VPN services (generally slower than direct connections) F2F (like Retroshare or Freenet - slow!!) Aspera (fast but expensive!) BitTorrent (unreachable end nodes, b/c of firewalls which we must not configure) We would like to try: Cloud storage (e.g. Amazon S3, Google Storage) - are those services always and reliably reachable from inside China? Point-to-Point VPN (currently not possible, b/c of the network, see above) I'd be especially grateful to hear from people who have already dealt with this kind of problem before.

  Read the article

• How to configure something like "Reflexive ACL" on OpenBSD?

  - by Earlz

  My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

  Read the article

• Cannot write, format, nor erase flash drive

  - by Baruch

  I have a 4gig flash drive, which I can read from but not write on, erase, nor format in any computer (tried in 7 different computers including xp, vista, and win7). I want to erase all the data inside because it is useless. Once I erase something, it erases it and gives me an error that it can't find the file. Once I refresh the folder, the file comes back. I tried holding Shift + Del. I also tried to use the command to format it in safe mode, but it says "access denied". I don't have a write protection button or whatever it is on my flash drive. It's just a simple small 4 gig one.

  Read the article

• Remote X-windows between new RHEL5 and old Solaris 8

  - by joshxdr

  I have a very small lab network with three boxes: a modern x86-based RHEL3 box, an x86-based RHEL5 box, and a 1998-vintage SPARC Ultra5 with Solaris 8. I can use ssh -X to run a program on the RHEL5 box and view the windows on the RHEL3 box. I believe this uses xauth and magic cookies?? I have followed the X-Windows HOWTO to set up xauth on the Solaris box, but so far no dice. I would like to be able to use the X-windows server on the RHEL3 box with a client program on the Solaris box (program running on Solaris host, windows appearing at Linux host). Is there a trick to this, or have I made a mistake following the instructions for setting up xauth and magic cookie?

  Read the article

• Cascading KVM switches

  - by einpoklum

  I have a not-so-small number of computers (say, 5) which I want to access with a single keyboard, USB and monitor. I can get an 8-port KVM switch, which is a pretty expensive piece of hardware; however, in theory, I should be able to cascade KVM switches: Have one 4-port KVM switch between 2 other KVMs (a 2-port and a 4-port). Is this doable (with typical off-the-shelf switches and cables)? Has anyone had experience doing this? Note: I'm interested in USB-only for the keyboard and mouse, and either VGA or DVI for the display. Audio and PS/2 connections are irrelevant for me..

  Read the article

• How do I turn off caching in IIS7?

  - by jammus

  Hello. I'm developing an ASP classic site under Windows 7 (form a queue ladies). The problem is IIS seems to be heavily making use of its cache for both static and dynamic content which really conflicts with my 'make a small change, alt-tab, hit ctrl-F5' development style. Changes made to .asp files may take two or three refreshes to show up where as changes to .js files can take 20 times as many. How do I go about turning the caching off on my development machine? Cheers. in b4 stop using asp classic

  Read the article

• Practical way to set up an email inbox for testing?

  - by Ben Collins

  I need to test a high-volume email application. Up to now, I've just been using gmail ad-hoc aliases ([email protected]) to receive emails and see that the content is right. However, I now need to verify a recipient list, which means I need to get every single email that goes out on a particular test run. The problem with Google isn't clear, but there's some throttling somewhere (perhaps from SendGrid, who is my delivery provider), and only a very small number of those emails ever make it to my acount. So: what's a practical way to get where I want to be? Is there a way to get gmail to just accept everything? Is there a web app / service somewhere that will let me throw up a fake email address that can receive for a large number of recipients? Is there something else?

  Read the article

• Polling performance on shared host

  - by Azincourt

  I am planning on writing a small browser game. The webserver is a shared server, with no root / install possible. I want to use AJAX for client/server communication. There will be 12 players. So each player would be polling the server for the current game status every X milliseconds (let's say 200ms). So that would be 200ms x 12 players x 5 = 60 requests per second Can Apache handle those requests? What might be the bottlenecks when using this attempt?

  Read the article

• Windows Server 2008 SOMETIMES blocks connection to an FTP Site

  - by ssilver2k2

  Hello Everyone Recently, our company has been having issue connecting to a special FTP server that we use offsite to upload small files. We can connect to the test server perfectly fine, but when we use the production ftp, it only randomly connects. If I plug my laptop directly into the modem and pull one of our other static IP addresses, I can connect just fine, but if I use our internal network, it is hit or miss. Also, turning OFF the firewall does NOT change the status of our connection problems. It will still time out. The weird issue is that it sometimes works, and when it does, it instantly asks for credentials and logs us on for that session, but if we disconnect and try again, it may or may not work. This also coincidentally occurred after uninstalling hamachi, and it blew away our internet settings on our Windows Server 2008 box, but everything else is working fine, and it was working fine before hamachi was installed.

  Read the article

• Home Server Restore

  - by Bryan Avery

  I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

  Read the article

• Home Server Restore

  - by Bryan Avery

  I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

  Read the article

• Optimal Instance Size for EC2 Sharepoint Server

  - by Rob Wilkerson

  I'm surprised that I can't find any info about this, but I'm not a Windows admin and just a novice EC2 user. I have a client who wants to stand up a Sharepoint server on EC2 for internal use. The team is small (10-20) folks and traffic will be light. Mostly, the client is looking for one place to store documents (and revisions of documents) while making access easy for authenticated users anywhere in the world. They've settled on Sharepoint and have other EC2 instances so that seems like the natural fit, but I'm trying to figure out what to recommend for them. I'm currently thinking about a Medium instance. I'm afraid to go smaller because I think Windows would need a fair amount of memory just to run, but I'm very open to suggestions. Any advice would be much appreciated. I expect that the storage itself would happen in an EBS mount, but again, suggestions welcome. Thanks for your input.

  Read the article

• What type of amazon instance should I use and do I need auto scaling and load balancing?

  - by Navetz

  Hi I am looking to release a website that will initially have large amounts of uploads from users. The first will be 65GB and the rest will probably be close to 1TB. They could happen simultaneously. My question is what type of amazon server instance would be best for this? The website is just being released so the traffic wont be very high. I have been using a micro instance for development but it is time to launch and I need more power. Should I use auto scaling and a load balancer to increase the number of instances when I need it or Will a small or medium instance do the trick? If I do use auto scaling and load balancing how do I handle things like sessions and the database/file lookups? Does one instance become the primary instance and the rest become clones?

  Read the article

• How to force 640*480@60Hz screen resolution on xubuntu 12.04

  - by c2h2

  It seems xubuntu won't be able to correctly set resolution at 640*480@60Hz at its Display settings. And I am unable to correctly my super small 6.4 inch Mitsubishi VGA panel via VGA cable. I have tried to hack both X11 conf /etc/X11/Xorg.conf and xfce4 conf, but all the document I can find is outdated. and conf files are changed into other location. Can someone give me a hand and I'll mark correct for other people to use? Thanks! EDIT: The board is an Intel Atom D2700, gpu is SGX545. I tried to use xrandr --output default --mode 640*480 It seems works fine, but refresh rate is 75Hz, but the screen only suports 60Hz So I used xrandr --output default --mode 640*480 --rate 60 but it give error: xrandr: Failed to get size of gamma for output default Can anyone pointing any directions?

  Read the article

• Virtual Box - not filling entire screen

  - by jdavis

  I am new to VirtualBox and am trying to set up an instance of Windows 7 64. I have the virtual machine instance running with Windows 7 now installed, but it only fills up a small portion of my screen. Even when I go full screen, the window stays the same size and the rest of the screen is filled with gray space. I have installed VirtualBox Guest Additions, which allowed me to go from a resolution of 800x600 to 1024x768, but this still isn't satisfactory as my laptop display is 1600x900. Any help on this would be most appreciated. Thanks.

  Read the article

• isolate web servers on intranet with dfl-800

  - by microchasm

  I administer a small network (10 users). I'm getting ready to deploy a internal webapp that will be hosted and accessed locally only. There are about 10 users on the network (192.168.111.0/24), a win2k3 server, apache (RHEL), and Mysql (RHEL), and various miscellaneous peripheries. I'd like to isolate the apache and sql boxes into a seperate area of the lan to keep things easier to maintain/grow. I've been reading about vlans, subnets, etc.. I'm not clear, however, which would be the best solution for our setup. Thanks for any tips and or advice.

  Read the article

• Ubuntu+Mono+Postgres+ASP.NET 4.0. No problem?

  - by wreck_of_u

  Would this be ok? I'm an ASP.NET developer and I'm planning to build "portable" web app servers based on Atom D510 mini-ITX. I have ran Ubuntu 10 with MySQL along with a separate IIS machines (win 2k3, 2k8) before with no problems. But now I'm thinking of "packaging" a web/db server into one small, cheap machine. I thought of Ubuntu/Mono/Postgres/ASP.NET, that it would be a good idea but I'm not sure? I have not actually tried it yet. Your thoughts?

  Read the article

• Behaviour of nginx as proxy

  - by HD

  I'm testing nginx with different configurations to replace an architecture working with squid + apache. I know that I can use nginx to manage static requests and load balancing but I'm interested in one particular solution that I don't understand clearly: I'm using 2 nginx servers (balanced) with the proxy_pass setting to pass all requests to an apache server. When one client makes a request to the site one of the nginx servers process it and send it to the apache server. Now, how this behaviour could be an improvement to my system?, it seems that all requests are passing through apache and I don't see benefit at all. What happens when 100 simultaneous connections pass through nginx? The 100 connections will be going to the apache server or is some kind of internal behaviour that allows an small impact into apache?

  Read the article

• Only ONE Outlook 2010 installation "Cannot connect to Exchange server" when setting up new profile.

  - by Johnny PDEX

  Exchange 2010, one-server installation (small production, I know not best practice) OWA Connectivity has been confirmed, Autodiscover is configured and working properly for EVERY other installation. Other user accounts tested on problem Outlook, none can connect. Windows Firewall is pre-configured by Group Policy, only modifications being related to remote management. Firewall has also been disabled during diagnostic period. Network discovery and file sharing is enabled on workstation as well. Windows 7 Professional, latest updates installed. Driving me nuts. Help, serverfault?

  Read the article

• Connecting office to data center via Metro-ethernet

  - by Eric

  I am installing a metro ethernet link from my office to my data center. The office will have a cisco 3750 with several vlans. The data center end will have a more complicated set up. The metro e from the office will connect to a 2960, which will have two other 2960s with a few vlans and a 2811 router connected to it for connectivity to our other environments and the internet. I am looking at implementing this by connecting the office 3750 and the data center 2960 with a dot1q trunk and doing all routing at the 2811. I will configure subinterfaces for gateways for each of the vlans on the 2811. I work for a small company and don't have much of a budget for an ideal architecture. I can post a simple diagram if needed for clarification. Is there anything I am missing here? I feel like I am forgetting something very basic and want to make sure I eliminate any boneheaded mistakes.

  Read the article

• Putting servers inside a refrigerator? [closed]

  - by Muhammad Jamal Shaikh

  It could be a silly question, but I decided to go for it. I shall be buying 3 servers in the next few weeks to set up a small webfarm at my home. I am told by different people who work in server rooms, that I should keep my servers in an air conditioned room. Which is really expensive, because the temperature here in south asia is between 10 to 50 degrees C. Here comes the funny part: I have an extra fridge in my home, why shouldn't I put the servers inside that fridge? Benefits: I don't have to buy the air conditioner. I don't have to buy the rack mount for the servers. The electricity consumed by the fridge is much much less than AC. Give me your suggestions!

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >