Search Results

Search found 9845 results on 394 pages for 'auto suggestion'.

Page 247/394 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• mkfs Operation Takes Very Long on Linux Software Raid 5

  - by Elmar Weber

  I've set-up a Linux software raid level 5 consisting of 4 * 2 TB disks. The disk array was created with a 64k stripe size and no other configuration parameters. After the initial rebuild I tried to create a filesystem and this step takes very long (about half an hour or more). I tried to create an xfs and ext3 filesystem, both took a long time, with mkfs.ext3 I observed the following behaviour, which might be helpful: writing inode tables runs fast until it reaches 1053 (~ 1 second), then it writes about 50, waits for two seconds, then the next 50 are written (according to the console display) when I try to cancel the operation with Control+C it hangs for half a minute before it is really canceled The performance of the disks individually is very good, I've run bonnie++ on each one separately with write / read values of around 95 / 110MB/s. Even when I run bonnie++ on every drive in parallel the values are only reduced by about 10 MB. So I'm excluding hardware / I/O scheduling in general as a problem source. I tried different configuration parameters for stripe_cache_size and readahead size without success, but I don't think they are that relevant for the file system creation operation. The server details: Linux server 2.6.35-27-generic #48-Ubuntu SMP x86_64 GNU/Linux mdadm - v2.6.7.1 Does anyone has a suggestion on how to further debug this?

  Read the article

• How to implement a virtual server running Ubuntu inside a fileserver in windows?

  - by user541445

  I work in a company that has some limitations regarding their budget. They need client/server aplication. I can code the aplication, I've made mini tests on primordial applications that work. The thing is that they only have fileservers, and the application they need must be concurrent compliant, so the database must be in their local network (Fileserver is the only choice). So far, I have explored almost any option available, starting with: Desktop databases. Access (We have a license)(But concurreny is just not effective, besides it's a windows software, yuck). Sqlite (Nice, but since the information they manage is a lot, I've performed some concurrency tests with INSERTs and doing SELECTS at the same time). It fails, somehow it just stops inserting. Open office Base (I dismember a base office only to see that it was a file mode HSQLDB). I've tried, not concurrent at all. Etc (You name the Open source Desktop Database manager, and yes, I've tried that one.) Server databases Call me a stubborn person, but reading some server databases documentation say that their databases will work in a file mode. I've tried a lot of products. Postgres, MySQL, FireBird, H2, Derby, Oracle Express, IBM DB2 Express, etc. So, I really need a hand here, I've been doing this install/delete/depression thing with a lot of databases for 3 weeks, until I got with a crazy idea and I just came here to express it. So, my question comes down to this: Installing a light virtual OS software like Virtual PC and then installing in there a Server OS like an Ubuntu server inside that virtual software will work? Will it work 24/7 or when I close the virtual pc software? Will this work in a fileserver? Any suggestion, answer, critic to the place I work, crazy new concurrent database that will work in fileserver will be most than welcome.

  Read the article

• Set up multiple websites on a local web server

  - by mickburkejnr

  I have spent the last few days setting up a CentOS 6 server on my local network so that I can host multiple projects that I'm currently working on. Everything has been set up so that I access the server by typing 192.168.1.10 and the Apache test page comes up. What I'm aiming to do is to access different projects by typing in 192.168.1.10/project, and then view the project as if it was on it's own standalone server. I have thought about just sticking these sites inside folders on the server then accessing them that way, but a lot of my projects use CakePHP so this isn't feasible. So what I need to do is create VirtualHosts in Apache to allow me to do this, but without using a domain name. I want to stick to using the IP address of the machine (which is static). Any ideas? EDIT I've followed Peter's suggestion, but now I have a new problem. In the httpd.conf file I have entered the following information: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/html/project1 ServerName local.project1.com ErrorLog logs/local.project1.com-error_log CustomLog logs/local.project1.com-access_log common </VirtualHost> And now Apache is saying: Starting httpd: Warning: DocumentRoot [/www/html/project1] does not exist When it clearly does exist. I've disabled SELinux and I can confirm this isn't turned on. I've also checked the ownership of the folder, and its owned by root. I can also save files to these folders using a guest FTP account (which isn't associated to root), so the folders are being listed and can be written to. But when I try the folder in a web browser it doesn't seem to work either. I've also done a reboot of the server and the problem persists. What should I change in order to resolve this?

  Read the article

• Microsoft Licensing Scenario/Questions [closed]

  - by user17455

  Possible Duplicate: Can you help me with my software licensing question? I am a member of a team developing a third party application (APP) that listens for and services connections from remote devices via TCP. Also, some of these remote devices allow 1 or more users to interact with the remote device. On some of the remote devices, it is impossible for a user to interact with the device. The user/remote device makes no use of any Windows Server service - not DHCP, not IIS, not File Server, not Print Serer, not AD. The remote device's only connection to the Windows Server machine is through the APP's TCP ports. Our company has no interaction with Microsoft. We do not have a Microsoft sales team. Past inquiries have determined that it is cheaper for us to buy Microsoft software (and CALs) retail than to enter into any kind of "arrangement" with Microsoft. I have many questions about SQL Server CALs and Windows Server 2008 CALs. How can I obtain authoritative/legally binding answers? I am not looking for FREE legal advice. I AM looking for FREE advice about who/what/where I can responsibly spend my money to get meaningful information. I fear that passing this on to the local company law firm will just mean that I will be paying them to educate themselves on Microsoft licensing. And if that's like writing code to a new Microsoft API - they are not going to get it right the first time. Going to Microsoft for answers sounds like swimming up to a hungry shark and asking "One leg or two?" I am hoping someone has been down this road before and knows a law firm/lawyer that is experienced in these matters. Any help/suggestion welcome. Thanks.

  Read the article

• replacing buffalo lonkstations with FreeNAS, overall backup strategy, am I on the right path?

  - by Shreko

  We've been using 2 Buffalo LinkStations of 320Gb each for shared directory and employee's server storage (around 20 employees). So only documents (word, excel, cad drawings etc.) and database backup of the main application server (ERP, Accounting) 1 buffalo box serves as a main one, located at the server room, next to the main application server and the other buffalo box is located on the opposite side of the building (for fire protection) in a secure storage room and backs up the first one. We also have several external HDs that backs up everything from the buffalo box for an offsite backup. After 3.5 years of using these, capacity is a main limitation, I'm planning a replacement and would like to use FreeNAS (we already use monowall with great success). I would like to keep it simple and continue similar setup, building two low power boxes with 1 hd (2Tb) each. Is low power atom mobo OK? Not sure about HDs? I've read on this site somebody mentioning more seagate ES2 as more reliable and better performing. How would those eco/green drives compare. We've been pretty happy with speed of Buffalo boxes and I don't want my users to notice any slowdown. Any suggestion?

  Read the article

• What can cause a kernel hang on redhat 4?

  - by Ivan Buttinoni

  I've to solve a nasty problem on a ten machine "cluster": randomly one of these machine hang during an hard computation, sometime still ping sometime not. The problem was described me at the phone, I've still no touch/see these machine, so I can't be more precise. It seem there's no (real) keyboard or monitor linked to them, so I haven't nothing about keyboard led or messages on monitor. Don't worry, what I really need is some suggestion where to search the problem, some suggestions on what can cause a kernel hang on a working machine. I also see this post, but seem same need on a different situation. My ideas since now: - HW problem (ram, cpu, fan etc.) - bad autofs configuration - bad nfs(?) configuration - presence of a trojan/hacker/etc - /dev/"swap" linked to /dev/zero - kernel out of memory(??) - kernel bugged In other words I try to imagine what kind of envent can occour that can crash the kernel insted of the application that generate the event. What hang have YOU experienced before? Write it to me! TIA

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• MRTG Monitoring of Disk

  - by Antitribu

  I am trying to monitor Disk usage over SNMP using MRTG on CentOS5.2. I'm open to any suggestions as to the best way to achieve this (I would also like to do other metrics like CPU). Please don't assume I know anything about MRTG. I am using the following config: LoadMIBs: /usr/share/snmp/mibs/UCD-SNMP-MIB.txt,/usr/share/snmp/mibs/TCP-MIB.txt workdir: /var/www/html/mrtg/temp/ # # Disk Usage Monitoring # Target[servername.]: dskPercent.0&dskPercent.0:[email protected] Title[servername.]: / on servername routers.cgi*Desc[servername.]: / on servername routers.cgi*ShortDesc[servername.]: / MaxBytes[servername.]: 100 AbsMax[servername.]: 100 Options[servername.]: growright,nopercent,gauge YLegend[servername.]: used disk space ShortLegend[servername.]: % used Legend1[servername.]: usage Legend2[servername.]: usage Legend3[servername.]: peak usage Legend4[servername.]: peak usage LegendI[servername.]: usage LegendO[servername.]: usage routers.cgi*Icon[servername.]: disk-sm.gif routers.cgi*Options[servername.]: noo,nomax,noabsmax Unscaled[servername.]: dwmy I receive the errors: Unknown SNMP var dskPercent.0 at /usr/bin/mrtg line 2035 Unknown SNMP var dskPercent.0 at /usr/bin/mrtg line 2035 From forum surfing etc the suggestion is to use the fully qualified OIDs, I'd like to avoid this (for readability). So essentially I'm wondering where can I find a mib file compatible with mrtg for it's reference or a working config file.

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• CodePlex Daily Summary for Wednesday, November 06, 2013

  CodePlex Daily Summary for Wednesday, November 06, 2013Popular ReleasesWin_8 (??? Devel Studio 2 ??? 3): Win8 0.8 + Sample (.dvs): ???????------------------------------------------ 1. ????????? ??????????? ????????? ??????. 2. ?????????? ???? , ????????? ? ?????????? ???? ????. 3. ?????????? ?????? ??????. 4. ?????????? ????????? ???????????. 5. ????????????? ??? . English----------------------------------------------------------------------- 1. Added ability to load icons. 2. Fixed bugs related to obtaining names of shapes. 3. Fixed a memory leak. 4. Fixed some defects. 5. Optimized code. ---------------------------...NWTCompiler: NWTCompiler v2.4.0: This version fixes a bug with Pinyin and adds support for the 2013 English NWT.ConEmu - Windows console with tabs: ConEmu 131105 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.Community Forums NNTP bridge: Community Forums NNTP Bridge V55 (LiveConnect): This is a which can be used with the new LiveConnect authentication and the MSDN forums. It fixed a bug where the authentication does not work after 1 hour. A logfile will be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt" or attached it to a issue.xUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net Visual Studio Runner: A placeholder for downloading Visual Studio runner VSIX files, in case the Gallery is down (or you want to downgrade to older versions).Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 - 1.0.0.0: Set the default view for a user for a particular entity based on security role Hide/ Show views for a user for a particular entity based on his security role Choose the preferred role for a user for view configuration when the user have more than one security role in the system. Ability to exclude/ include a user from view configuration as per business requirementsDuplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category. Updated database script file. Now compatible with lower version of SQL Server.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...New Projects.Net PG: Just university projectA2D: 1. Cache System 2. Event System 3. IoC 4. Sql Dispatcher System 5. Session System 6. ???Command Bus 7. ????Advantage Browser: A web browser made in Visual Basic 2010 for all to add and learn from or just use.BarCoder: BarCoder is C# Web app for creating EAN-8 and EAN-16 bar codec in vector graphic image format.CLIDE .NET: CLIDE .NET The Command Line IDE for .NET Because Code is just CodeDevcken Java Library: Devcken's Java LibraryDouble Sides Flipping Control - Windows Phone: Double Sides Flipping Control The Control features the following: Two Sides Control which flipping across its center in Both Directions based on horizontal geFigTree FHMS (Funeral Home Management System): FigTree FHMS (Funeral Home Management System) application is outfitted for daily operations of your funeral home.InChatter: InChatter is a Instant messaging communication module for a desktop application programmed by C#. And the server is a WCF program.Mod.Training: Some helpful examples about Orchardy stuffPlupload MVC4 Demo: This project shows how to implement Plupload with an MVC applicationQuality Control Management System: QCMS is a web-based Test Management systemQuan Ly Nha Thuoc: Project Qu?n Lý Ti?m Thu?c Tây Email: phuoc.nh2953@sinhvien.hoasen.edu.vnRandomchaos DX11 Engine: An open source C++ DX 11 EngineService Gateway: The service gateway enables composition and agility for web sites and services.Sortable objects: Sortable objects server and client sideSTSADM ExportCrawlLog - SP Foundation 2010: STSADM extension to see/export SharePoint Fiundation 2010 MSSearch configuration and Crawl LogsTACACS Plus Extended: tacacs+ updates to support subnet specific configurations and reduced configuration with ldap access.TKinect: Framework for Testing Kinect ApplicationsWebApi Data Wrapper: This project - a collection of wrapper for WebAPI.WPF ExpressionEditor: Control representing expression editor. Allows usage of custom expression parsers.

  Read the article

• error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

  - by brazorf

  This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

  Read the article

• How can you force the start and end date of a task in Microsoft Project to be on the same day?

  - by Hauke P.

  I have a task called "Interview person A about topic X". The task's duration is set to 2 hours. The start date of the task should automatically be calculated taking dependencies and resource availabilities into account. My question boils down to: How can I force this task to start and end on the same date? Background: In my case, Microsoft Project sets the start date to a Friday at 5pm. As my working hours are set to 8am to 12am and 1pm to 6pm (Mon-Fri), Microsoft Project "splits up" the task at 6pm on Friday and plans to continue it at 8am on the following Monday. However, it does not make any sense to stop the interview on a Friday and restart it on Monday. Therefore the automatic suggestion is not helpful in this case. That's why I'm looking for a way way to force the task to start and end on the very same day. (In my example, I'd like Microsoft Project to delay the start date of the task until Monday 8am as this is the first time slot in which the task "fits in completely".) By the way: I have lots of such cases... for that reason it would be really great if there was a solution that doesn't just deal with this single special case.)

  Read the article

• Windows Server 2008 ignores any change made to firewall

  - by Maurice Courtois

  I have been trying for the last 2 hours to make my Windows Server 2008 answer ping. I have tried almost every single solution I have found on the web, so far nothing work. My current setup: 2 NIC (1x Internet connection, 1x Local network) Server act as VPN server. So I set the corresponding NIC as either Public or Private. I also enable the rule for "File and Printer Sharing (Echo Request...)" for all Nic and from any IPs. I always been able to ping from the local network or the local ip while connected to the VPN. I also tried to create a specific rule for ICMP ping and disabling the firewall for all but the public nic. Regardless of all this, I still can't ping that server from Internet. Any idea suggestion what could cause this? I have the impression that when you set the server as VPN (I switch the box on when setting it up to block everything else than VPN connection) that changing anything to the firewall setting thought mmc is pointless !?!?

  Read the article

• /usr/bin/install hangs, apparently due to SELinux

  - by Cooper

  I'm trying to use the GNU coreutils install utility, however it is hanging: /usr/bin/install -v test_file test_dir/ `test_file' -> `test_dir/test_file I see the same behavior whether I run as a normal user, or root/sudo. I ran an strace -f, and this is the end of the output: ... read(4, "<username>\t-d\tsystem_u:object_r:ho"..., 4096) = 2197 <0.000012> brk(0x6e3b1000) = 0x6e3b1000 <0.000009> mmap(NULL, 29138944, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2abd831ae000 <0.000014> munmap(0x2abd815dd000, 29138944) = 0 <0.003466> The read() is reading from /etc/selinux/targeted/contexts/files/file_contexts.homedirs, apparently successfully. It appears that the process is hanging right after the munmap, but continues to eat 100% CPU. My two questions are: 1) Any good way to see what is going on with the process? I'm currently too lazy to compile a debug version of install I can run gdb on - but a strong suggestion in an answer here may motivate me to do so if needed. 2) Any idea what the SELinux issue could be? I'm not too familiar with SELinux. Additional info of possible relevance: # ls -Z drwxr-xr-x my_user 7001 user_u:object_r:user_home_t test_dir -rw-r--r-- my_user 7001 user_u:object_r:user_home_t test_file # id ... context=user_u:system_r:unconfined_t # uname -a Linux hostname 2.6.18-238.1.1.el5 #1 SMP Tue Jan 4 13:32:19 EST 2011 x86_64 x86_64 x86_64 GNU/Linux I am suspicious that SELinux + Quest Authentication Services (QAS) is causing the issue. QAS is generally well behaved, but it did cause the /etc/selinux/targeted/contexts/files/file_contexts.homedirs to get quite large (~18k users, @23 lines per user) Update: install -v -Z user_u:object_r:user_home_t file dir/ seems to work. Can anyone suggest why, given that SELinux is in permissive mode (see comments).

  Read the article

• After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB

  - by Tom Crane

  (I have also posted this on technet but I'm running out of ideas) I've upgraded from Windows Server 2008 R2 Standard to Enterprise in order to make use of more RAM. The server previously had 32GB of RAM. The upgrade from Standard to Enterprise, using DISM, seemed to go OK, so I powered down and installed the RAM. This a Dell Poweredge T710, I was taking it from 32GB to 72GB. The BIOS recognised the RAM, although I needed to change from "Advanced ECC" to "Optimizer" mode for it to use all of it. After rebooting, windows can see the RAM but in the system panel will display: Installed memory (RAM): 72.0 GB (4.00 GB usable) In the resource monitor, the remainder of the RAM is showing as reserved for hardware. I've tried various RAM configurations, including reverting it to the same chips and same configuration as before the upgrade, but always just 4.00 GB is showing up as usable. Following some threads on these forums I've gone into msconfig and set the maximum memory "by hand" but that doesn't fix the problem. BIOS doesn't seem to have anything that looks like memory remapping which is another suggestion that has come up. How do I make this RAM available to Windows? It was available before the upgrade, because I could use the full 32GB RAM the server had to start with. A screenshot (this is after reverting to the original RAM configuration) http://screencast.com/t/5FuzevdNb I don't know if it's related, but my remote desktop configuration has also disappeared: screencast.com/t/mYedomeQWS (the bottom half of this dialog should allow me to configure Remote Desktop, it was working before the upgrade but now it isn't).

  Read the article

• Windows Explorer and UAC: run elevated

  - by syneticon-dj

  I am profoundly annoyed by UAC and switch it off for my admin user wherever I can. Yet, there are situations where I can't - especially if those are machines not under my continuous administration. In this case, I am always challenged with the task of traversing directories using my administrative user via the Windows Explorer where regular users do not have "read" permissions. The possible two approaches to this problem so far: change the ACLs to the directory in question to include my user (Windows conveniently offers the Continue button in the "You don't currently have permissions to access this folder" dialog. This obviously sucks since more often than not I do not want to change ACLs but just look into the folder's contents use an elevated cmd.exe prompt along with a bunch of command line utilities - this usually takes a lot of time when browsing through large and / or complex directory structures What I would love to see would be a way to run Windows Explorer in elevated mode. I have yet to find out how to do so. But other suggestions solving this problem in an unobtrusive way without changing the entire system's configuration (and preferably without the need for downloading / installing anything) are very welcome, too. I have seen this post with a suggestion for altering HKCR - interesting, but it changes the behavior for all users, which I am not allowed to do in most situations. Also, some folks have suggested using UNC paths to access the folders - unfortunately this does not work when accessing the same machine (i.e. \\localhost\c$\path) as the "Administrators" group membership is still stripped from the token and a re-authentication (and thus the creation of a new token) would not happen when accessing localhost.

  Read the article

• Replacing HD in an MacOS 10.6.8 server caused all shares to fail

  - by Cheesus

  I'm hoping someone might have a helpful suggestion about this problem. We have 2 MacOSX servers available for file sharing. (quad Xeons - 2GB RAM, both 10.6.8), No.1 is an Open Directory Master with 50+ user accounts, No.2 has only 2 local accounts (/local/Default) and looks at the OD Master for all user accounts (/LDAPv3/10.x.x.20/) Both servers have 3 internal HD's, The boot volume with only Server OS and minimal Apps. A 'DataShare' HD (500GB) and a backup drive (500GB). After upgrading the DataShare HD in Server No.2 from a small internal HD (500GB) to larger capacity (2TB) drive, users are unable to connect to shares on Server No.2. Users get an error "There are no shares available or you are not allowed to access them on the server" The process I followed was to use Carbon Copy Cloner to create an exact copy of the original data drive (keeps all ownership data, UID, permissions, last edit date and time). Everything booted up ok, no indication there was any issues. (Paths to the sharepoint look good) Notes during troubleshooting - Server1 is operating perfectly, all users can access shares and authenticate etc. - I've checked the SACL (Server Access Control List) settings is ok. - On Server2 in the Server Admin' app, I can see all the shares listed ok. The paths seem valid, I can disable / reenable the shares, no errors. - On Server2 'workgroup manager' lists all the accounts from the OD Master in the LDAP dir view. All seems fine from here. Basically everything looks normal but no file shares on Server2 can be accessed from regular users.

  Read the article

• Problem with running a script at startup as root?

  - by Usman Ajmal

  Hi The main question: Is there a way I can run 'completely' one of my script when ubuntu's desktop appears no matter if root , administrator, desktop user or an unprivileged user logged in? What does the script do? The script mounts a partition, looks for a file in that partition and finally on the basis of that file a decision of copying a partition to another partition is made. That copying is done via dd if=/dev/sda2 of=/dev/sda5 When does the script run finely? Script runs smoothly when I run it from the terminal by sudo ./my_copying_script This command asks me for the password of currently logged in user. I enter the password and the script starts working. When does the script NOT run finely? I want to run the script at startup. I set it a startup program by using the Startup Applications utility of Ubuntu. Script ran at startup but exited at the dd command returing following error: dd: opening '/dev/sda2': Permission denied On edk's suggestion I set the owner of my_copying_script as root and set the SUID. Now the permissions of my_copying_script are (-rwsr-sr-x). edk's point of view was that once I set the suid, the startup program will run with the permissions of its owner. I did that but the same /dev/sda2 permission denied error came up. I then prefixed the dd with sudo as mentioned below sudo dd if=/dev/sda2 of=/dev/sda5 but this returned following error: sudo: no tty present and no askpass program specified In other words the mounting failed. If I run the script using sudo ./myProgram i don't face this problem and the drive gets mounted successfully.

  Read the article

• How to Access User Directory shared by Apache on OS X Mountain Lion?

  - by schluchc

  When trying to access the local user web page on localhost/~username, I get a "403 Forbidden". The system web page in /Library/WebServer/Documents is accessible on localhost/ though, so I assume Apache is working fine. I know that this problem has been discussed several times, also on superuser. I implemented and checked all I could find, but I still couldn't solve the problem and would be glad if someone had a suggestion for this particular case: sudo apachectl -t returns Syntax OK. I have a username.conf file in /etc/apache2/users/: <Directory "/Users/username/Sites/"> Options Indexes MultiViews FollowSymLinks AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> as proposed here [SuperUser] and in several other tutorials. The permissions of the username.conf file are -rw-r--r-- root wheel, as they should be. The httpd.conf is unchanged and therefore contains the line Include /private/etc/apache2/extra/httpd-userdir.conf. That file in turn contains UserDir Sites Include /private/etc/apache2/users/*.conf <IfModule bonjour_module> RegisterUserSite customized-users </IfModule> So the httpd*.conf files should be ok. The permissions of /Users/username/Sites is drwxr-xr-x 10 username staff and -rw-r--r--@ 1 username staff for the index.html. In the error log I simply get a [Sun Nov 25 22:14:32 2012] [error] [client 127.0.0.1] (13)Permission denied: access to /~username/ denied. And yes, after each change I did the sudo apachectl restart. Any help no how to solve the problem or how to further analyze it would be highly appreciated!

  Read the article

• Use autocomplete in dropdown cells with Excel 2007?

  - by Martin

  I want to make a survey with Excel and I therefore have defined the cells for the answers as a dropdown cell which only accepts answers from a certain list, e. g.: The two Lists List1 and List2 (yellow cells) are the possible answers for the questions in Block 1.x resp. 2.x (blue) . There might be a block 4 with more questions, which again use List1 for their possible answers. My problem is: I'd like to be able to use the autocompleate feature to fill in the blue cells with the dropdown menu, so that the user only types 5 and it automatically expands to "5: extremely important" or "5: extremely difficult". According to my research on the www, this should be possible if I add the list with possible answers directly above the cells where autocomplete should work (I did this with the green helper cells which could be hidden) . But I have to enter at least 4 characters 5: e to get the autocompleted suggestion. Is there a way to make autocomplete already replace a "5" by the corresponding valid term? As the survey file shall be distributed to a lot of people "outside", I can not use VBA magic because it may be blocked on their computer and might not work. EDIT: it seems to have to do with the numbers I use: If I'd start my List items with A, B, C instead of 1, 2, 3, it would work perfectly. Excel seems to ignore the pure numbers when they are entered and does not try to autocomplete them.. is there a workaround? (I hope it is clear what I want, it seems a little difficult to explain.)

  Read the article

• Slackware - Assigning routes (IP address ranges) to one of many network adapters

  - by Dogbert

  I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

  Read the article

• MongoDB on 128mb 32-bit VPS (plus Tornado and Redis)

  - by apito

  i am curious about how mongodb will perform in a limited vps. specifically, i'll deploy this configuration on 32-bit ubuntu 9.04 server with 128Mb memory (UPDATE: now i'm considering 360mb too). nginx and redis three instances of tornado apps (one is for mobile site; limited app, not my primary audience); has around 8 Collections. social webapp for my community. mongodb all beside mongodb seems to have small footprint. memory-mapping-wise, i dont know how mongodb will behave. i know it's a little bit a stretch to use this kind of config on a tiny vps, but that's what i can afford for now. i expect to have.. hmm.. maybe ~50 15rps. i did my homework doing a lot of frontend optimizations and yslow says grade A 91 (ruleset V2) :-) anyone willing to share experiences? eg. how big the data set size when mongo hit the ceiling, performance when mongo do a lot of disk IO, etc. thanks. UPDATE: this is my pet project. i'll get back to you when i have next spare time to do same httperf in a vbox with exact spec. suggestion how to do stress testing welcomed. i'm new to this kind of stuff.

  Read the article

• Failover Cluster Quorum Failing

  - by oruchreis

  Hi, I have two nodes which boots from iscsi to implement windows 2008 cluster. And I'm using disk majority option as quorum over iscsi. But when the quorum's iscsi connection failed(May be san server reset), the failover cluster is failed too. If I reset one of the nodes, it can open, but its system disk goes offline. I cant change its status as online, because it says that its reserved by failover cluster(disk is on iscsi, beacuse iscsi boot). And this disk works as readonly. Anything on it cant be deleted or written. So, I cant rejoin the node to the cluster again. I have to reinstall windows. So, what I'm asking is, how can I implement more quorum backup? I mean, can I use both disk majority and file share majority at same time? AFAIK, every nodes also keep the quorum's copy too. But I don't know sometimes san servers goes offline. And quorum's iscsi connection and nodes' iscsi connections get lost. So, nor the quorum that is kept in the nodes neither the quorum iscsi disk is not enough to start the cluster again. I want to use both disk majority and file share majority at the same time. Can I do this? Have you any other suggestion? Regards.

  Read the article

• Error when mount the database in exchange 2010 SP1

  - by user64060

  Hi, My company have two exchange 2010 SP1 servers with DAG configuration with OS widows server 2008 R2 in testing entironment. Today i want to test my backup possibility, so i restore the backup data to another location not original location. I dismount the database and then delete the all files under the database location. last I copy back the files from back up location to database location. When i want to mount the database. It will come out the below error! -------------------------------------------------------- Microsoft Exchange Error -------------------------------------------------------- Failed to mount database 'mail2'. mail2FailedError: Couldn't mount the database that you specified. Specified database: mail2; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Database: mail2, Server: mail2.e0594.cn]. An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Database: mail2, Server: mail2.e0594.cn] An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Server: mail2.e0594.cn] MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) Any suggestion? Thanks!

  Read the article

• How do I get started with the M-Project is a Mobile HTML5 JavaScript Framework on Windows?

  - by Bruce Whealton

  This website for this great tool, call the M-Project says that I will need to add a doskey like this: doskey espresso=node C:\Path\To\Espresso\bin\espresso.js $1 $2 $3 $4 (It is a tool for creating Native mobile apps with the Phonegap/Cordova library, and it seems to be something that would be very helpful in this process). If I enter that at a command prompt in Windows 7 or 8, it's not going to stick around or persist. Is it an Environment Variable? Then it says at this page: http://www.the-m-project.org/ that it will work with Windows with some additional tools installed. The next line says that Node.js is needed, so I don't know if that is the additional tools mentioned above. Also, in an old discussion I read that one could just install cygwin. What would that do? It doesn't actually install any of the Linux distributions. I did install Ubuntu 12.04 server with VirtualBox because I thought it would be good to learn more about using Linux as I manage websites that are on a dedicated host. Anyway, the suggestion to install cygwin did not go into any details... I guess it would allow one to create a bash profile?? which would only work in a cygwin Command Line Window. Is that right? Isn't there a similar file that one could use in Windows or an Environment Variable that one could set to be able to achieve the same result? Thanks, Bruce

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >