Search Results

Search found 7241 results on 290 pages for 'casey hope'.

Page 247/290 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

  - by Arkadius

  I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

  Read the article

• FAQ&ndash;Highlight GridView Row on Click and Retain Selected Row on Postback

  - by Vincent Maverick Durano

  A couple of months ago I’ve written a simple demo about “Highlighting GridView Row on MouseOver”. I’ve noticed many members in the forums (http://forums.asp.net) are asking how to highlight row in GridView and retain the selected row across postbacks. So I’ve decided to write this post to demonstrate how to implement it as reference to others who might need it. In this demo I going to use a combination of plain JavaScript and jQuery to do the client-side manipulation. I presumed that you already know how to bind the grid with data because I will not include the codes for populating the GridView here. For binding the gridview you can refer this post: Binding GridView with Data the ADO.Net way or this one: GridView Custom Paging with LINQ. To get started let’s implement the highlighting of GridView row on row click and retain the selected row on postback.  For simplicity I set up the page like this: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>You have selected Row: (<asp:Label ID="Label1" runat="server" />)</h2> <asp:HiddenField ID="hfCurrentRowIndex" runat="server"></asp:HiddenField> <asp:HiddenField ID="hfParentContainer" runat="server"></asp:HiddenField> <asp:Button ID="Button1" runat="server" onclick="Button1_Click" Text="Trigger Postback" /> <asp:GridView ID="grdCustomer" runat="server" AutoGenerateColumns="false" onrowdatabound="grdCustomer_RowDataBound"> <Columns> <asp:BoundField DataField="Company" HeaderText="Company" /> <asp:BoundField DataField="Name" HeaderText="Name" /> <asp:BoundField DataField="Title" HeaderText="Title" /> <asp:BoundField DataField="Address" HeaderText="Address" /> </Columns> </asp:GridView> </asp:Content>   Note: Since the action is done at the client-side, when we do a postback like (clicking on a button) the page will be re-created and you will lose the highlighted row. This is normal because the the server doesn't know anything about the client/browser not unless if you do something to notify the server that something has changed. To persist the settings we will use some HiddenFields control to store the data so that when it postback we can reference the value from there. Now here’s the JavaScript functions below: <asp:content id="Content1" runat="server" contentplaceholderid="HeadContent"> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js" type="text/javascript"></script> <script type="text/javascript">       var prevRowIndex;       function ChangeRowColor(row, rowIndex) {           var parent = document.getElementById(row);           var currentRowIndex = parseInt(rowIndex) + 1;                 if (prevRowIndex == currentRowIndex) {               return;           }           else if (prevRowIndex != null) {               parent.rows[prevRowIndex].style.backgroundColor = "#FFFFFF";           }                 parent.rows[currentRowIndex].style.backgroundColor = "#FFFFD6";                 prevRowIndex = currentRowIndex;                 $('#<%= Label1.ClientID %>').text(currentRowIndex);                 $('#<%= hfParentContainer.ClientID %>').val(row);           $('#<%= hfCurrentRowIndex.ClientID %>').val(rowIndex);       }             $(function () {           RetainSelectedRow();       });             function RetainSelectedRow() {           var parent = $('#<%= hfParentContainer.ClientID %>').val();           var currentIndex = $('#<%= hfCurrentRowIndex.ClientID %>').val();           if (parent != null) {               ChangeRowColor(parent, currentIndex);           }       }          </script> </asp:content>   The ChangeRowColor() is the function that sets the background color of the selected row. It is also where we set the previous row and rowIndex values in HiddenFields.  The $(function(){}); is a short-hand for the jQuery document.ready function. This function will be fired once the page is posted back to the server that’s why we call the function RetainSelectedRow(). The RetainSelectedRow() function is where we referenced the current selected values stored from the HiddenFields and pass these values to the ChangeRowColor) function to retain the highlighted row. Finally, here’s the code behind part: protected void grdCustomer_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { e.Row.Attributes.Add("onclick", string.Format("ChangeRowColor('{0}','{1}');", e.Row.ClientID, e.Row.RowIndex)); } } The code above is responsible for attaching the javascript onclick event for each row and call the ChangeRowColor() function and passing the e.Row.ClientID and e.Row.RowIndex to the function. Here’s the sample output below:   That’s it! I hope someone find this post useful! Technorati Tags: jQuery,GridView,JavaScript,TipTricks

  Read the article

• Walmart and Fusion Apps

  - by ultan o'broin

  Photograph: Misha Vaughan I attended Fusion Apps (yes, I know I am supposed to say "Oracle Fusion Applications", but stuffy old style guides are a turn-off in interwebs conversations) User Experience Advocate (FXA) training in Long Beach, California last week; a suitable location as ODTUG KSCOPE 11 was kicking off and key players were in the area. As a member of Oracle's Apps-UX team I know the Fusion Apps messaging, natch, and done some other Fusion Apps go-to-market content work too. For the messaging details themselves, see Lonneke Dikmans (@lonnekedikmans) great blog, by the way. However, I wanted some 'formal' training combined with the opportunity to meet and learn from people already out there delivering those messages. The idea in me reaching out to Misha Vaughan, Apps-UX FXA maven, to get me onto this training was that in addition to my UX knowledge, I could leverage my location in EMEA and hit up customer events more quickly and easily. Those local user groups do like to hear the voice of locals too you know (so I need to work on that mid-Atlantic accent). I'm looking forward to such opportunities. The training was all smashing stuff, just the right level of detail, delivered professionally and with great style and humor. I was especially honored to be paired off for my er, coaching with Debra Lilley (@debralilley), who shared with everyone all kinds of tips and insights from her experiences of delivering the message and demo. For me, that was the real power of the FXA event--the communal, conversational aspect--the meeting up with people who had done all this for real, the sharing in their experiences, while learning along with other newbies. Sorry, but that all-important social aspect doesn't work so well with remote meetings. Katie Candland (Apps-UX) gave us a great tour of the Fusion Apps demo and included some useful presentational tips too (any excuse to buy that iPad). It's clear to me that the Fusion Apps messaging and demos really come alive with real-world examples that local application users will recognize, and I picked up some "yes, that's my job made easier" scene-stealers from Debra and Karen Brownfield too, to add to the great ones already provided. This power of examples shouldn't surprise anyone, they've long been a mainstay of applications user assistance, popular with users. We'll offer customers different types of example topics in the Fusion Apps online help too (stay tuned), and we know from research how important those 3S's (stories, scenarios, and simulations) are to users when they consume and apply information. Well, we've got the simulation, now it's time for more stories and scenarios. If you get a chance to participate in an FXA event (whether you are an Oracle employee or otherwise), I'd encourage it. It's committing your time and energy for sure, but I got real bang for the buck from it for my everyday job too. Listening to the room's feedback on the application demo really brought our internal design work to life, and I picked up on some things that I need to follow up on (like how you alphabetically sort stuff in other languages). User experience is after all, about users. What will I be doing next, and what would I like to see happen? Obviously, I need to develop my story-telling links with the people I met in Long Beach and do some practicing with the materials, and then get out there and deliver them at a suitable location. The demo is what it is right now, and that's a super-rich demo that I know everyone will want to see and ask questions about. Then, as mentioned by attendees at the FXA event, follow up on those translated and localized messages for EMEA (and APAC), that deal with different statutory or reporting requirements of the target markets. Given my background I would say that, wouldn't I? However, language is part of the UX, and international revenue is greater than US-only revenue for Oracle, so yes dear, we all need to get over the fact that enterprise apps users don't all speak, or want to speak, American-English. Most importantly perhaps, the continued development of a strong messaging community between Oracle and partners and customers where we can swap and share those FXA messaging stories and scenarios about Fusion Apps in a conversational way. The more the better, a combination of online and face-to-face meetings. I must also mention the great dinner after the event at Parker's Lighthouse, and the fun myself and Andrew Gilmour (Apps-UX) had at our end of the table talking about just about everything except Fusion Apps with Ronald Van Luttikhuizen and Ben Prusinski (who now understands the difference between Cork and Dublin people. I hope). Thanks to all the Apps-UXers who helped bring the FXA training to town, and to Debra and all the others that I am too jetlagged to mention right who were instrumental in making it happen for me. Here's to the next one. And the Walmart angle? That was me doing my Robert Scoble (ScO'bilizer?)-style guerilla smart phone research in Walmart in Long Beach, before the FXA event. It's all about stories for me. You can read more about it on the appslab blog (see the comments).

  Read the article

• Master Page: Dynamically Adding Rows in ASP Table on Button Click event

  - by Vincent Maverick Durano

  In my previous post here, I wrote an example that demonstrates how are we going to generate table rows dynamically using ASP Table on click of the Button control. Now based on some comments in my previous example and in the forums they wanted to implement it within Masterpage. Unfortunately the code in my previous example doesn't work in Masterpage for the following main reasons: The Table is dynamically added within the Form tag and so the TextBox control will not be generated correcty in the page. The data will not be retained on each and every postbacks because the SetPreviousData() method is looking for the Table element within the Page and not on the MasterPage. The Request.Form key value should be set correctly since all controls within the master page are prefixed with the naming containter ID to prevent duplicate ids on the final rendered HTML. For example the TextBox control with the ID of TextBoxRow will turn to ID to this ctl00$MainBody$TextBoxRow. In order for the previous example to work within Masterpage then we will have to correct those three main reasons above and this post will guide you how to correct it. Suppose we have this content page declaration below:   <asp:Content ID="Content1" ContentPlaceHolderID="MainHead" Runat="Server"> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainBody" Runat="Server"> <asp:PlaceHolder ID="PlaceHolder1" runat="server"> <asp:Button ID="BTNAdd" runat="server" Text="Add New Row" OnClick="BTNAdd_Click" /> </asp:PlaceHolder> </asp:Content> As you notice I've added a PlaceHolder control within the MainBody ContentPlaceHolder. This is because we are going to generate the Table in the PlaceHolder instead of generating it within the Form element. Now since issue #1 is already corrected then let's proceed to the code beind part. Here are the full code blocks below:     using System; using System.Web.UI; using System.Web.UI.WebControls; public partial class DynamicControlDemo : System.Web.UI.Page { private int numOfRows = 1; protected void Page_Load(object sender, EventArgs e) { //Generate the Rows on Initial Load if (!Page.IsPostBack) { GenerateTable(numOfRows); } } protected void BTNAdd_Click(object sender, EventArgs e) { if (ViewState["RowsCount"] != null) { numOfRows = Convert.ToInt32(ViewState["RowsCount"].ToString()); GenerateTable(numOfRows); } } private void SetPreviousData(int rowsCount, int colsCount) { Table table = (Table)this.Page.Master.FindControl("MainBody").FindControl("Table1"); // **** if (table != null) { for (int i = 0; i < rowsCount; i++) { for (int j = 0; j < colsCount; j++) { //Extracting the Dynamic Controls from the Table TextBox tb = (TextBox)table.Rows[i].Cells[j].FindControl("TextBoxRow_" + i + "Col_" + j); //Use Request object for getting the previous data of the dynamic textbox tb.Text = Request.Form["ctl00$MainBody$TextBoxRow_" + i + "Col_" + j];//***** } } } } private void GenerateTable(int rowsCount) { //Creat the Table and Add it to the Page Table table = new Table(); table.ID = "Table1"; PlaceHolder1.Controls.Add(table);//****** //The number of Columns to be generated const int colsCount = 3;//You can changed the value of 3 based on you requirements // Now iterate through the table and add your controls for (int i = 0; i < rowsCount; i++) { TableRow row = new TableRow(); for (int j = 0; j < colsCount; j++) { TableCell cell = new TableCell(); TextBox tb = new TextBox(); // Set a unique ID for each TextBox added tb.ID = "TextBoxRow_" + i + "Col_" + j; // Add the control to the TableCell cell.Controls.Add(tb); // Add the TableCell to the TableRow row.Cells.Add(cell); } // And finally, add the TableRow to the Table table.Rows.Add(row); } //Set Previous Data on PostBacks SetPreviousData(rowsCount, colsCount); //Sore the current Rows Count in ViewState rowsCount++; ViewState["RowsCount"] = rowsCount; } }   As you observed the code is pretty much similar to the previous example except for the highlighted lines above. That's it! I hope someone find this post usefu! Technorati Tags: Dynamic Controls,ASP.NET,C#,Master Page

  Read the article

• Configuring Application/User Settings in WPF the easy way.

  - by mbcrump

  In this tutorial, we are going to configure the application/user settings in a WPF application the easy way. Most example that I’ve seen on the net involve the ConfigurationManager class and involve creating your own XML file from scratch. I am going to show you a easier way to do it. (in my humble opinion) First, the definitions: User Setting – is designed to be something specific to the user. For example, one user may have a requirement to see certain stocks, news articles or local weather. This can be set at run-time. Application Setting – is designed to store information such as a database connection string. These settings are read-only at run-time. 1) Lets create a new WPF Project and play with a few settings. Once you are inside VS, then paste the following code snippet inside the <Grid> tags. <Grid> <TextBox Height="23" HorizontalAlignment="Left" Margin="12,11,0,0" Name="textBox1" VerticalAlignment="Top" Width="285" Grid.ColumnSpan="2" /> <Button Content="Set Title" Name="button2" Click="button2_Click" Margin="108,40,96,114" /> <TextBlock Height="23" Name="textBlock1" Text="TextBlock" VerticalAlignment="Bottom" Width="377" /> </Grid> Basically, its just a Textbox, Button and TextBlock. The main Window should look like the following:   2) Now we are going to setup our Configuration Settings. Look in the Solution Explorer and double click on the Settings.settings file. Make sure that your settings file looks just like mine included below:   What just happened was the designer created an XML file and created the Settings.Designer.cs file which looks like this: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace WPFExam.Properties { [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")] internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase { private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings()))); public static Settings Default { get { return defaultInstance; } } [global::System.Configuration.UserScopedSettingAttribute()] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Configuration.DefaultSettingValueAttribute("ApplicationName")] public string ApplicationName { get { return ((string)(this["ApplicationName"])); } set { this["ApplicationName"] = value; } } [global::System.Configuration.ApplicationScopedSettingAttribute()] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Configuration.DefaultSettingValueAttribute("SQL_SRV342")] public string DatabaseServerName { get { return ((string)(this["DatabaseServerName"])); } } } } The XML File is named app.config and looks like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="WPFExam.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false" /> </sectionGroup> <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="WPFExam.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" /> </sectionGroup> </configSections> <userSettings> <WPFExam.Properties.Settings> <setting name="ApplicationName" serializeAs="String"> <value>ApplicationName</value> </setting> </WPFExam.Properties.Settings> </userSettings> <applicationSettings> <WPFExam.Properties.Settings> <setting name="DatabaseServerName" serializeAs="String"> <value>SQL_SRV342</value> </setting> </WPFExam.Properties.Settings> </applicationSettings> </configuration> 3) The only left now is the code behind the button. Double click the button and replace the MainWindow() method with the following code snippet. public MainWindow() { InitializeComponent(); this.Title = Properties.Settings.Default.ApplicationName; textBox1.Text = Properties.Settings.Default.ApplicationName; textBlock1.Text = Properties.Settings.Default.DatabaseServerName; } private void button2_Click(object sender, RoutedEventArgs e) { Properties.Settings.Default.ApplicationName = textBox1.Text.ToString(); Properties.Settings.Default.Save(); } Run the application and type something in the textbox and hit the Set Title button. Now, restart the application and you should see the text that you entered earlier.   If you look at the button2 click event, you will see that it was actually 2 lines of codes to save to the configuration file. I hope this helps, for more information consult MSDN.

  Read the article

• WPF Databinding- Part 2 of 3

  - by Shervin Shakibi

  This is a follow up to my previous post WPF Databinding- Not your fathers databinding Part 1-3 you can download the source code here  http://ssccinc.com/wpfdatabinding.zip Example 04   In this example we demonstrate  the use of default properties and also binding to an instant of an object which is part of a collection bound to its container. this is actually not as complicated as it sounds. First of all, lets take a look at our Employee class notice we have overridden the ToString method, which will return employees First name , last name and employee number in parentheses, public override string ToString()        {            return String.Format("{0} {1} ({2})", FirstName, LastName, EmployeeNumber);        }   in our XAML we have set the itemsource of the list box to just  “Binding” and the Grid that contains it, has its DataContext set to a collection of our Employee objects. DataContext="{StaticResource myEmployeeList}"> ….. <ListBox Name="employeeListBox"  ItemsSource="{Binding }" Grid.Row="0" /> the ToString in the method for each instance will get executed and the following is a result of it. if we did not have a ToString the list box would look  like this: now lets take a look at the grid that will display the details when someone clicks on an Item, the Grid has the following DataContext DataContext="{Binding ElementName=employeeListBox,            Path=SelectedItem}"> Which means its bound to a specific instance of the Employee object. and within the gird we have textboxes that are bound to different Properties of our class. <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=FirstName}" /> <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=LastName}" /> <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=Title}" /> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding Path=Department}" />   Example 05   This project demonstrates use of the ObservableCollection and INotifyPropertyChanged interface. Lets take a look at Employee.cs first, notice it implements the INotifyPropertyChanged interface now scroll down and notice for each setter there is a call to the OnPropertyChanged method, which basically will will fire up the event notifying to the value of that specific property has been changed. Next EmployeeList.cs notice it is an ObservableCollection . Go ahead and set the start up project to example 05 and then run. Click on Add a new employee and the new employee should appear in the list box.   Example 06   This is a great example of IValueConverter its actuall a two for one deal, like most of my presentation demos I found this by “Binging” ( formerly known as g---ing) unfortunately now I can’t find the original author to give him  the credit he/she deserves. Before we look at the code lets run the app and look at the finished product, put in 0 in Celsius  and you should see Fahrenheit textbox displaying to 32 degrees, I know this is calculating correctly from my elementary school science class , also note the color changed to blue, now put in 100 in Celsius which should give us 212 Fahrenheit but now the color is red indicating it is hot, and finally put in 75 Fahrenheit and you should see 23.88 for Celsius and the color now should be black. Basically IValueConverter allows us different types to be bound, I’m sure you have had problems in the past trying to bind to Date values . First look at FahrenheitToCelciusConverter.cs first notice it implements IValueConverter. IValueConverter has two methods Convert and ConvertBack. In each method we have the code for converting Fahrenheit to Celsius and vice Versa. In our XAML, after we set a reference in our Windows.Resources section. and for txtCelsius we set the path to TxtFahrenheit and the converter to an instance our FahrenheitToCelciusConverter converter. no need to repeat this for TxtFahrenheit since we have a convert and ConvertBack. Text="{Binding  UpdateSourceTrigger=PropertyChanged,            Path=Text,ElementName=txtFahrenheit,            Converter={StaticResource myTemperatureConverter}}" As mentioned earlier this is a twofer Demo, in the second demo, we basically are converting a double datatype to a brush. Lets take a look at TemperatureToColorConverter, notice we in our Covert Method, if the value is less than our cold temperature threshold we return a blue brush and if it is higher than our hot temperature threshold we return a redbrush. since we don’t have to convert a brush to double value in our example the convert back is not being implemented. Take time and go through these three examples and I hope you have a better understanding   of databinding, ObservableCollection  and IValueConverter . Next blog posting we will talk about ValidationRule, DataTemplates and DataTemplate triggers.

  Read the article

• CD/DVD drive not mounted when inserted with Disc of any kind

  - by Cisco Sán

  I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

  Read the article

• PASS: Board Q&amp;A at the Summit

  - by Bill Graziano

  The last two years we’ve put the Board in front of the members and taken questions.  We’re going to do that again this year.  It will be in Room 307/308 from 12:15 to 1:30 on Friday. Yes, this time overlaps with the Birds of a Feather Lunch and the start of afternoon sessions – but only partially.  You can attend the Q&A and still get to parts of both of those.  There just isn’t a great time to do this.  Every time overlaps with something. We can’t do it after the last session on Friday.  We can’t fit it between the last session and the evening events on Wednesday or Thursday.  We had some discussion around breakfast time but I didn’t think that was realistic.  This is the least bad time we could come up with. Last year we had 60-70 people attend.  These are the items that were specific things that I could work on: The first question was whether to increase transparency around individual votes of Board members.  We approved this at the Board meeting the following day.  The only caveat was that if the Board is given confidential information as a basis for their vote then we may not be able to disclose individual votes.  Putting a Director in a position where they can’t publicly defend the reason for their vote is a difficult situation.  Thanks Kendal! Can we have a Board member discretionary fund?  As background, I took a couple of people to lunch so we could have a quiet place to talk.  I bought lunch but wasn’t able to expense it back to PASS.  We just don’t have a budget item for things like this.  I think we should.  I would guess the entire Board would like it also.  It was in an earlier version of the budget but came out as part of a cost-cutting move to balance the budget.  I’d like to see it added back in but we’ll have to see. I know there were a comments about the elections.  At this point we had created the Election Review Committee.  I’ve already written at length about this process. Where does IT work go?  PASS started to publish our internal management reports starting in December 2010.  You can find them on our Governance page.  These aren’t filtered at all and include a variety of information about IT projects.  The most recent update had roughly a page of updates related to IT.  Lots of the work was related to Summit and the Orator tool that we use to manage speaker submissions. There were numerous requests that Tina Turner not be repeated.  Done.  I don’t think we’ll do anything quite like that again.  We had a request for a payment plan for Summit.  We looked into this briefly but didn’t take any action.  We didn’t think the effort was worth the small number of people that would use it.  If you disagree, submit this on our Summit Feedback site and get some votes. There were lots of suggestions around the first-timers events – especially from first timers.  You can find all our current activities related to first-timers at the First Timers page on the Summit web site.  Plus links to 34 (!) blog posts on suggestions for first-timers.  And a big THANK YOU to Confio and Red Gate for sponsoring this. I hope you get the chance to attend.  These events are very helpful to me as a Board member.  I like being able to look around the room as comments are being made and see the audience reaction.  It helps me gauge the interest in an idea. I’d also like to direct you to the Summit Feedback site.  You can submit and vote on ideas to make the Summit a better experience.  As of right now we have the suggestions from last year still up.  We may reset these prior to the Summit though.

  Read the article

• Phones, Nokia, Microsoft and More

  - by Bill Evjen

  The phone revolution that is under way at the moment is insanely interesting and continuously full of buzz about directions, failures, and promises. The movement started with Apple completely reinventing what a smart phone was all about and now we have the followers. Though – don’t dismiss the followers, they are usually the ones that come out with the leap frog products when most of the world is thinking about jumping on. Remember the often used analogy – the USA invented the TV – but it was Japan that took it to the next level and now all TVs are from somewhere else other than the USA. Really there are two camps for the phones – the Cool Kids and other kids that no one wants to hang out with anymore. When it comes to cool – for some reason, the phone is an important part of that factor. Everyone wants to show their phone and its configuration (apps installed, etc) to their friends as a sign of (1) “I have money” and (2) I have smarts/tastes/style/etc when it comes to my applications that are on my phone. For those that don’t know – the Cool Kids include: Apple – this is quite obvious as everything Apple produces is in the cool camp. Just having an Apple product on your person means you can dance. Google – this is one of the more interesting releases as they have created something called Android (which in it’s own right is a major brand in itself). Microsoft – you might be saying “Really, Microsoft is cool?”. I would argue that they are indeed cool as it is now associated with XBOX 360, Kinect, and Windows 7. Gone are the days of Bob and that silly paperclip. Well – that’s it. There is nobody else I would stick in that camp. The other kids that weren’t picked for that dodgeball team include: Nokia Motorola Palm Blackberry and many many more The sad part of all this is that no matter what this second camp does now, it won’t be able to get out of this bucket easily. They will always be associated as yesterday’s technology and that association will drive the sales of the phone purchasers of the world. For those in that group, the only possible way out is to get invited to the cool club by one of the cool club members in the hope that their coolness somehow rubs off. To me, this is the move that Nokia is making. They are at this point where they have realized that they don’t have the full scope of the required end to end solution to make this all work. They have the plants to build the phones and the reach of the retailers that sell what they have. What they are missing is the proper operating system for the new world of multi-touch form factor phones. Even the companies that come up with some sort of new operating system for this type of new device, they are still associated with the yesterday and lack the developer community behind them to be the real wave of adoption that this market needs. Think about that – this is a major different between Nokia/Blackberry when you compare it to the likes of Apple, Google, and Microsoft. These three powerhouses having a very large and strong development community that will eagerly take on new initiatives using the skillsets that they have already cultivated over the years of already working with the company. This then results in a plethora of applications that are then placed on an app store of some kind. The developer gets a cut and then Apple/Google/Microsoft then get their cut. It is definitely a win-win. None of the other phone companies and wannabies can provide the same results. What Microsoft was missing was the major phone manufactures coming on board to create and push forward with the phones that are required to start the wave. This is where Nokia can come in and help Microsoft. They have the ability to promote the Windows Phone operating system on a new wave of phones. This does mean that Nokia will sell phones, but they lose out on the application store that they might have been thinking about making some money on as well as controlling the end to end solution. What is interesting is in questioning to oneself if Microsoft will purchase Nokia. It really depends upon how they want to compete and with whom Microsoft views as the major competitor. For instance, they can purchase Nokia and have their own hardware company and distribution network for phones – thereby taking on a model that is quite similar to Apple. On the other hand, they could just leave it up to the phone hardware companies such as Nokia and others to build and promote phones in a model that is similar to Google. Both ways have pluses and minuses. If they own the phone manufacturer, they really can put some thought into the design and technical specifications of the phone that is really designed to exactly how they want it. Microsoft has shown that they have this ability – especially with the XBOX initiative they have done over the years. Think about how good and powerful they have moved forward with XBOX – and I am not talking about just copying what others are doing, but coming up with leapfrog products that are steps ahead of everyone else. Though, if they didn’t do it themselves, they could then leave it up to the phone manufacturers to drive each other to build better and better phones that run the Microsoft OS – competition drives better products. We have seen this with the Android line of phones that are out there on the market. I have read a lot about Nokia investors really upset about the new Microsoft relationship – but really, this is a great thing. I for one am a fan of this relationship (I am also a Nokia stock holder btw). This will mean better days for Nokia.

  Read the article

• How to properly add texture to multi-fixture/shape b2Body

  - by Blazej Wdowikowski

  Hello to everyone this is my first poste here I hope that will be not fail start. At start I must say I make part 1 in Ray's Tutorial "How To Make A Game Like Fruit Ninja With Box2D and Cocos2D". But I wonder what when I want make more complex body with texture? Simple just add n b2FixtureDef to the same body. OK but what about texture? If I will take code from that tutorial it only fill last fixture. Probably it does not takes every b2Vec2 point. I was right, it did not. So quick refactor and from that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int vertexCount = shape->GetVertexCount(); NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; for(int i = 0; i < vertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width, _centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I came up with that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { int vertexCount = 0; //gather total number of b2Vect2 points b2Fixture *currentFixture = body->GetFixtureList(); while (currentFixture) { //new b2PolygonShape *shape = (b2PolygonShape*)currentFixture->GetShape(); vertexCount += shape->GetVertexCount(); currentFixture = currentFixture->GetNext(); } NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); while (originalFixture) { //new NSLog((NSString*)@"-"); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int currentVertexCount = shape->GetVertexCount(); for(int i = 0; i < currentVertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } originalFixture = originalFixture->GetNext(); } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width,_centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I was working for simple two fixtures body like b2BodyDef bodyDef; bodyDef.type = b2_dynamicBody; bodyDef.position = position; bodyDef.angle = rotation; b2Body *body = world->CreateBody(&bodyDef); b2FixtureDef fixtureDef; fixtureDef.density = 1.0; fixtureDef.friction = 0.5; fixtureDef.restitution = 0.2; fixtureDef.filter.categoryBits = 0x0001; fixtureDef.filter.maskBits = 0x0001; b2Vec2 vertices[] = { b2Vec2(0.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(0.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(50.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(60.0/PTM_RATIO,60.0/PTM_RATIO) }; b2PolygonShape shape; shape.Set(vertices, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); b2Vec2 vertices2[] = { b2Vec2(20.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(20.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(70.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(80.0/PTM_RATIO,60.0/PTM_RATIO) }; shape.Set(vertices2, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); But if I try put secondary shape upper than first it starting wierd, texture goes crazy. For example not mention about more complex shapes. What's more if shapes have one common point texture will not render for them at all [For that I use Physics Edytor like in tutorial part1] BTW. I use PolygonSprite and in method createWithWorld... another shapes. Uff.. Question So my question is, why texture coords are in such a mess up? It's my modify method or just wrong approach? Maybe I should remove duplicated from points array?

  Read the article

• Modularity through HTTP

  - by Michael Williamson

  As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

  Read the article

• NetBeans, JSF, and MySQL Primary Keys using AUTO_INCREMENT

  - by MarkH

  I recently had the opportunity to spin up a small web application using JSF and MySQL. Having developed JSF apps with Oracle Database back-ends before and possessing some small familiarity with MySQL (sans JSF), I thought this would be a cakewalk. Things did go pretty smoothly...but there was one little "gotcha" that took more time than the few seconds it really warranted. The Problem Every DBMS has its own way of automatically generating primary keys, and each has its pros and cons. For the Oracle Database, you use a sequence and point your Java classes to it using annotations that look something like this: @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="POC_ID_SEQ") @SequenceGenerator(name="POC_ID_SEQ", sequenceName="POC_ID_SEQ", allocationSize=1) Between creating the actual sequence in the database and making sure you have your annotations right (watch those typos!), it seems a bit cumbersome. But it typically "just works", without fuss. Enter MySQL. Designating an integer-based field as PRIMARY KEY and using the keyword AUTO_INCREMENT makes the same task seem much simpler. And it is, mostly. But while NetBeans cranks out a superb "first cut" for a basic JSF CRUD app, there are a couple of small things you'll need to bring to the mix in order to be able to actually (C)reate records. The (RUD) performs fine out of the gate. The Solution Omitting all design considerations and activity (!), here is the basic sequence of events I followed to create, then resolve, the JSF/MySQL "Primary Key Perfect Storm": Fire up NetBeans. Create JSF project. Create Entity Classes from Database. Create JSF Pages from Entity Classes. Test run. Try to create record and hit error. It's a simple fix, but one that was fun to find in its completeness. :-) Even though you've told it what to do for a primary key, a MySQL table requires a gentle nudge to actually generate that new key value. Two things are needed to make the magic happen. First, you need to ensure the following annotation is in place in your Java entity classes: @GeneratedValue(strategy = GenerationType.IDENTITY) All well and good, but the real key is this: in your controller class(es), you'll have a create() function that looks something like this, minus the comment line and the setId() call in bold red type:     public String create() {         try {             // Assign 0 to ID for MySQL to properly auto_increment the primary key.             current.setId(0);             getFacade().create(current);             JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("CategoryCreated"));             return prepareCreate();         } catch (Exception e) {             JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));             return null;         }     } Setting the current object's primary key attribute to zero (0) prior to saving it tells MySQL to get the next available value and assign it to that record's key field. Short and simple…but not inherently obvious if you've never used that particular combination of NetBeans/JSF/MySQL before. Hope this helps! All the best, Mark

  Read the article

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• Seven Random Thoughts on JavaOne

  - by HecklerMark

  As most people reading this blog may know, last week was JavaOne. There are a lot of summary/recap articles popping up now, and while I didn't want to just "add to pile", I did want to share a few observations. Disclaimer: I am an Oracle employee, but most of these observations are either externally verifiable or based upon a collection of opinions from Oracle and non-Oracle attendees alike. Anyway, here are a few take-aways: The Java ecosystem is alive and well, with a breadth and depth that is impossible to adequately describe in a short post...or a long post, for that matter. If there is any one area within the Java language or JVM that you would like to - or need to - know more about, it's well-represented at J1. While there are several IDEs that are used to great effect by the developer community, NetBeans is on a roll. I lost count how many sessions mentioned or used NetBeans, but it was by far the dominant IDE in use at J1. As a recent re-convert to NetBeans, I wasn't surprised others liked it so well, only how many. OpenJDK, OpenJFX, etc. Many developers were understandably concerned with the change of sponsorship/leadership when Java creator and longtime steward Sun Microsystems was acquired by Oracle. The read I got from attendees regarding Oracle's stewardship was almost universally positive, and the push for "openness" is deep and wide within the current Java environs. Few would probably have imagined it to be this good, this soon. Someone observed that "Larry (Ellison) is competitive, and he wants to be the best...so if he wants to have a community, it will be the best community on the planet." Like any company, Oracle is bound to make missteps, but leadership seems to be striking an excellent balance between embracing open efforts and innovating in competitive paid offerings. JavaFX (2.x) isn't perfect or comprehensive, but a great many people (myself included) see great potential, are developing for it, and are really excited about where it is and where it may be headed. This is another part of the Java ecosystem that has impressive depth for being so new (JavaFX 1.x aside). If you haven't kicked the tires yet, give it a try! You'll be surprised at how capable and versatile it is, and you'll probably catch yourself smiling while coding again.  :-) JavaEE is everywhere. Not exactly a newsflash, but there is a lot of buzz around EE still/again/anew. Sessions ranged from updated component specs/technologies to Websockets/HTML5, from frameworks to profiles and application servers. Programming "server-side" Java isn't confined to the server (as you no doubt realize), and if you still consider JavaEE a cumbersome beast, you clearly haven't been using the last couple of versions. Download GlassFish or the WebLogic Zip distro (or another JavaEE 6 implementation) and treat yourself. JavaOne is not inexpensive, but to paraphrase an old saying, "If you think that's expensive, you should try ignorance." :-) I suppose it's possible to attend J1 and learn nothing, but you'd have to really work at it! Attending even a single session is bound to expand your horizons and make you approach your code, your problem domain, differently...even if it's a session about something you already know quite well. The various presenters offer vastly different perspectives and challenge you to re-think your own approach(es). And finally, if you think the scheduled sessions are great - and make no mistake, most are clearly outstanding - wait until you see what you pick up from what I like to call the "hallway sessions". Between the presentations, people freely mingle in the hallways, go to lunch and dinner together, and talk. And talk. And talk. Ideas flow freely, sparking other ideas and the "crowdsourcing" of knowledge in a way that is hard to imagine outside of a conference of this magnitude. Consider this the "GO" part of a "BOGO" (Buy One, Get One) offer: you buy the ticket to the "structured" part of JavaOne and get the hallway sessions at no additional charge. They're really that good. If you weren't able to make it to JavaOne this year, you can still watch/listen to the sessions online by visiting the JavaOne course catalog and clicking the media link(s) in the right column - another demonstration of Oracle's commitment to the Java community. But make plans to be there next year to get the full benefit! You'll be glad you did. All the best,Mark P.S. - I didn't mention several other exciting developments in areas like the embedded space and the "internet of things" (M2M), robotics, optimization, and the cloud (among others), but I think you get the idea. JavaOne == brainExpansion;  Hope to see you there next year!

  Read the article

• Part 1 - Load Testing In The Cloud

  - by Tarun Arora

  Azure is fascinating, but even more fascinating is the marriage of Azure and TFS! Introduction Recently a client I worked for had 2 major business critical applications being delivered, with very little time budgeted for Performance testing, we immediately hit a bottleneck when the performance testing phase started, the in house infrastructure team could not support the hardware requirements in the short notice. It was suggested that the performance testing be performed on one of the QA environments which was a fraction of the production environment. This didn’t seem right, the team decided to turn to the cloud. The team took advantage of the elasticity offered by Azure, starting with a single test agent which was provisioned and ready for use with in 30 minutes the team scaled up to 17 test agents to perform a very comprehensive performance testing cycle. Issues were identified and resolved but the highlight was that the cost of running the ‘test rig’ proved to be less than if hosted on premise by the infrastructure team. Thank you for taking the time out to read this blog post, in the series of posts, I’ll try and cover the start to end of everything you need to know to use Azure to build your Test Rig in the cloud. But Why Azure? I have my own Data Centre… If the environment is provisioned in your own datacentre, - No matter what level of service agreement you may have with your infrastructure team there will be down time when the environment is patched - How fast can you scale up or down the environments (keeping the enterprise processes in mind) Administration, Cost, Flexibility and Scalability are the areas you would want to think around when taking the decision between your own Data Centre and Azure! How is Microsoft's Public Cloud Offering different from Amazon’s Public Cloud Offering? Microsoft's offering of the Cloud is a hybrid of Platform as a Service (PaaS) and Infrastructure as a Service (IaaS) which distinguishes Microsoft's offering from other providers such as Amazon (Amazon only offers IaaS). PaaS – Platform as a Service IaaS – Infrastructure as a Service Fills the needs of those who want to build and run custom applications as services. Similar to traditional hosting, where a business will use the hosted environment as a logical extension of the on-premises datacentre. A service provider offers a pre-configured, virtualized application server environment to which applications can be deployed by the development staff. Since the service providers manage the hardware (patching, upgrades and so forth), as well as application server uptime, the involvement of IT pros is minimized. On-demand scalability combined with hardware and application server management relieves developers from infrastructure concerns and allows them to focus on building applications. The servers (physical and virtual) are rented on an as-needed basis, and the IT professionals who manage the infrastructure have full control of the software configuration. This kind of flexibility increases the complexity of the IT environment, as customer IT professionals need to maintain the servers as though they are on-premises. The maintenance activities may include patching and upgrades of the OS and the application server, load balancing, failover clustering of database servers, backup and restoration, and any other activities that mitigate the risks of hardware and software failures.   The biggest advantage with PaaS is that you do not have to worry about maintaining the environment, you can focus all your time in solving the business problems with your solution rather than worrying about maintaining the environment. If you decide to use a VM Role on Azure, you are asking for IaaS, more on this later. A nice blog post here on the difference between Saas, PaaS and IaaS. Now that we are convinced why we should be turning to the cloud and why in specific Azure, let’s discuss about the Test Rig. The Load Test Rig – Topology Now the moment of truth, Of course a big part of getting value from cloud computing is identifying the most adequate workloads to take to the cloud, so I’ve decided to try to make a Load Testing rig where the Agents are running on Windows Azure.   I’ll talk you through the above Topology, - User: User kick starts the load test run from the developer workstation on premise. This passes the request to the Test Controller. - Test Controller: The Test Controller is on premise connected to the same domain as the developer workstation. As soon as the Test Controller receives the request it makes use of the Windows Azure Connect service to orchestrate the test responsibilities to all the Test Agents. The Windows Azure Connect endpoint software must be active on all Azure instances and on the Controller machine as well. This allows IP connectivity between them and, given that the firewall is properly configured, allows the Controller to send work loads to the agents. In parallel, the Controller will collect the performance data from the agents, using the traditional WMI mechanisms. - Test Agents: The Test Agents are on the Windows Azure Public Cloud, as soon as the test controller issues instructions to the test agents, the test agents start executing the load tests. The HTTP requests are issued against the web server on premise, the results are captured by the test agents. And finally the results are passed over to the controller. - Servers: The Web Server and DB Server are hosted on premise in the datacentre, this is usually the case with business critical applications, you probably want to manage them your self. Recap and What’s next? So, in the introduction in the series of blog posts on Load Testing in the cloud I highlighted why creating a test rig in the cloud is a good idea, what advantages does Windows Azure offer and the Test Rig topology that I will be using. I would also like to mention that i stumbled upon this [Video] on Azure in a nutshell, great watch if you are new to Windows Azure. In the next post I intend to start setting up the Load Test Environment and discuss pricing with respect to test agent machine types that will be used in the test rig. Hope you enjoyed this post, If you have any recommendations on things that I should consider or any questions or feedback, feel free to add to this blog post. Remember to subscribe to http://feeds.feedburner.com/TarunArora.  See you in Part II.   Share this post : CodeProject

  Read the article

• What to do after a servicing fails on TFS 2010

  - by Martin Hinshelwood

  What do you do if you run a couple of hotfixes against your TFS 2010 server and you start to see seem odd behaviour? A customer of mine encountered that very problem, but they could not just, or at least not easily, go back a version.   You see, around the time of the TFS 2010 launch this company decided to upgrade their entire 250+ development team from TFS 2008 to TFS 2010. They encountered a few problems, owing mainly to the size of their TFS deployment, and the way they were using TFS. They were not doing anything wrong, but when you have the largest deployment of TFS outside of Microsoft you tend to run into problems that most people will never encounter. We are talking half a terabyte of source control in TFS with over 80 proxy servers. Its certainly the largest deployment I have ever heard of. When they did their upgrade way back in April, they found two major flaws in the product that meant that they had to back out of the upgrade and wait for a couple of hotfixes. KB983504 – Hotfix KB983578 – Patch KB2401992 -Hotfix In the time since they got the hotfixes they have run 6 successful trial migrations, but we are not talking minutes or hours here. When you have 400+ GB of data it takes time to copy it around. It takes time to do the upgrade and it takes time to do a backup. Well, last week it was crunch time with their developers off for Christmas they had a window of opportunity to complete the upgrade. Now these guys are good, but they wanted Northwest Cadence to be available “just in case”. They did not expect any problems as they already had 6 successful trial upgrades. The problems surfaced around 20 hours in after the first set of hotfixes had been applied. The new Team Project Collection, the only thing of importance, had disappeared from the Team Foundation Server Administration console. The collection would not reattach either. It would not even list the new collection as attachable! Figure: We know there is a database there, but it does not This was a dire situation as 20+ hours to repeat would leave the customer over time with 250+ developers sitting around doing nothing. We tried everything, and then we stumbled upon the command of last resort. TFSConfig Recover /ConfigurationDB:SQLServer\InstanceName;TFS_ConfigurationDBName /CollectionDB:SQLServer\instanceName;"Collection Name" -http://msdn.microsoft.com/en-us/library/ff407077.aspx WARNING: Never run this command! Now this command does something a little nasty. It assumes that there really should not be anything wrong and sets about fixing it. It ignores any servicing levels in the Team Project Collection database and forcibly applies the latest version of the schema. I am sure you can imagine the types of problems this may cause when the schema is updated leaving the data behind. That said, as far as we could see this collection looked good, and we were even able to find and attach the team project collection to the Configuration database. Figure: After attaching the TPC it enters a servicing mode After reattaching the team project collection we found the message “Re-Attaching”. Well, fair enough that sounds like something that may need to happen, and after checking that there was disk IO we left it to it. 14+ hours later, it was still not done so the customer raised a priority support call with MSFT and an engineer helped them out. Figure: Everything looks good, it is just offline. Tip: Did you know that these logs are not represented in the ~/Logs/* folder until they are opened once? The engineer dug around a bit and listened to our situation. He knew that we had run the dreaded “tfsconfig restore”, but was not phased. Figure: This message looks suspiciously like the wrong servicing version As it turns out, the servicing version was slightly out of sync with the schema. KB Schema Successful           KB983504 341 Yes   KB983578 344 sort of   KB2401992 360 nope   Figure: KB, Schema table with notation to its success The Schema version above represents the final end of run version for that hotfix or patch. The only way forward The problem was that the version was somewhere between 341 and 344. This is not a nice place to be in and the engineer give us the  only way forward as the removal of the servicing number from the database so that the re-attach process would apply the latest schema. if his sounds a little like the “tfsconfig recover” command then you are exactly right. Figure: Sneakily changing that 3 to a 1 should do the trick Figure: Changing the status and dropping the version should do it Now that we have done that we should be able to safely reattach and enable the Team Project Collection. Figure: The TPC is now all attached and running You may think that this is the end of the story, but it is not. After a while of mulling and seeking expert advice we came to the opinion that the database was, for want of a better term, “hosed”. There could well be orphaned data in there and the likelihood that we would have problems later down the line is pretty high. We contacted the customer back and made them aware that in all likelihood the repaired database was more like a “cut and shut” than anything else, and at the first sign of trouble later down the line was likely to split in two. So with 40+ hours invested in getting this new database ready the customer threw it away and started again. What would you do? Would you take the “cut and shut” to production and hope for the best?

  Read the article

• Actionscript 3.0 - Enemies do not move right in my platformer game

  - by Christian Basar

  I am making a side-scrolling platformer game in Flash (Actionscript 3.0). I have made lots of progress lately, but I have come across a new problem. I will give some background first. My game level's terrain (or 'floor') is referenced by a MovieClip variable called 'floor.' My desire is to have the Player and enemy characters walk along the terrain. I have gotten the Player character to move on the terrain just fine; he walks up/down hills and falls whenever there is no ground beneath him. Here is the code I created to allow the Player to follow the terrain correctly. Much more code is used to control the Player, but only this code deals with the Player character's following of the terrain and gravity. // If the Player's not on the ground (not touching the 'floor' MovieClip)... if (!onGround) { // Disable ducking downKeyPressed = false; // Increase the Player's 'y' position by his 'y' velocity player.y += playerYVel; } // Increase the 'playerYVel' variable so that the Player will fall // progressively faster down the screen. This code technically // runs "all the time" but in reality it only affects the player // when he's off the ground. playerYVel += gravity; // Give the Player a terminal velocity of 15 px/frame if (playerYVel > 15) { playerYVel = 15; } // If the Player has not hit the 'floor,' increase his falling //speed if (! floor.hitTestPoint(player.x, player.y, true)) { player.y += playerYVel; // The Player is not on the ground when he's not touching it onGround = false; } Since getting this code to work for the Player, I have created a 'SkullDemon' class, which is one of the planned enemies for my game. I want the 'SkullDemon' objects to move along the terrain like the Player does. With lots of great help, I have already coded the EventListeners, etc. necessary for the 'SkullDemons' to move. Unfortunately, I am having trouble getting them to move along the terrain. In fact, they do not touch the terrain at all; they move along the top of the boundary of the 'floor' MovieClip! I had a simple text diagram showing what I mean, but unfortunately Stackoverflow does not format it correctly. I hope my problem is clear from my description. Strangely enough, my code for the Player's movement and the 'SkullDemon's' movement is almost exactly the same, yet the 'SkullDemons' do not move like the Player does. Here is my code for the SkullDemon movement: // Move all of the Skull Demons using this method protected function moveSkullDemons():void { // Go through the whole 'skullDemonContainer' for (var skullDi:int = 0; skullDi < skullDemonContainer.numChildren; skullDi++) { // Set the SkullDemon 'instance' variable to equal the current SkullDemon skullDIns = SkullDemon(skullDemonContainer.getChildAt(skullDi)); // For now, just move the Skull Demons left at 5 units per second skullDIns.x -= 5; // If the Skull Demon has not hit the 'floor,' increase his falling //speed if (! floor.hitTestPoint(skullDIns.x, skullDIns.y, true)) { // Increase the Skull Demon's 'y' position by his 'y' velocity skullDIns.y += skullDIns.sdYVel; // The Skull Demon is not on the ground when he's not touching it skullDIns.sdOnGround = false; } // Increase the 'sdYVel' variable so that the Skull Demon will fall // progressively faster down the screen. This code technically // runs "all the time" but in reality it only affects the Skull Demon // when he's off the ground. if (! skullDIns.sdOnGround) { skullDIns.sdYVel += skullDIns.sdGravity; // Give the Skull Demon a terminal velocity of 15 px/frame if (skullDIns.sdYVel > 15) { skullDIns.sdYVel = 15; } } // What happens when the Skull Demon lands on the ground after a fall? // The Skull Demon is only on the ground ('onGround == true') when // the ground is touching the Skull Demon MovieClip's origin point, // which is at the Skull Demon's bottom centre for (var i:int = 0; i < 10; i++) { // The Skull Demon is only on the ground ('onGround == true') when // the ground is touching the Skull Demon MovieClip's origin point, // which is at the Skull Demon's bottom centre if (floor.hitTestPoint(skullDIns.x, skullDIns.y, true)) { skullDIns.y = skullDIns.y; // Set the Skull Demon's y-axis speed to 0 skullDIns.sdYVel = 0; // The Skull Demon is on the ground again skullDIns.sdOnGround = true; } } } } // End of 'moveSkullDemons()' function It is almost like the 'SkullDemons' are interacting with the 'floor' MovieClip using the hitTestObject() function, and not the hitTestPoint() function which is what I want, and which works for the Player character. I am confused about this problem and would appreciate any help you could give me. Thanks!

  Read the article

• Microsoft BUILD 2013 Day 1&ndash;Keynote

  - by Tim Murphy

  Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013-day-1ndashkeynote.aspx This one is going to be a little long because the keynote was jam-packed so bare with me. The keynote for the first day of BUILD 2013 was kicked off by Steve Balmer.  He made it very clear that Microsoft’s focus is on accelerating its time to market with products and product updates.  His quote was that “Rapid release” is the new norm.  He continued by showing off several new Lumias that have been buzzing around the internet for a while and announce that Sprint will now be carrying the HTC 8XT and Samsung ATIV. Balmer is known for repeating words or phrase for affect.  This time it was “Rapid release, rapid release” and “Touch, touch, touch, touch, touch, …”.  This was fun, but even more fun was when he announce that all attendees would receive an Acer Iconia 8” tablet. SCORE! The next subject Balmer focused on is new apps.  The three new ones were Flipboard, Facebook and NFL Fantasy Football.  I liked the first two because these are ones that people coming from other platforms are missing.  The NFL app is great just because it targets a demographic that can be fanatical.  If these types of apps keep coming than the missing app argument goes away. While many Negative Nancy’s are describing Windows 8.1 as Windows 180 Steve Balmer chose to call it a “refined blend” as in a coffee that has been improved with a new mix.  This includes more multi-tasking options and leveraging Bing straight throughout the entire ecosystem. He ended this first section by explaining that this will also bring more Bing development opportunities to the community. Steve Balmer was followed by Julie Larson-Green who spent her time on stage selling us on Windows 8 all over again from my point of view.  Something that I would not have thought was needed until I had listened to some other attendees who had a number of concerns and complaints.  She showed a number of new gestures that will come with Windows 8.1, and while they were cool I was left wondering if they really improved the experience.  I guess only time will tell. I did like the fact that it the UI implementation to bring up “All Apps” now mirrors that of Windows Phone.  The consistency is a big step forward that I hope to see continue.  The cool factor went up from there as she swiped content from a desktop (mega-tablet) to the XBox One.  This seamless experience I believe is what is really needed for any future platform to be relevant. I was much more enthused by the presentation of Antoine Leblond who humbled us by letting us know that there are 5k new API.  How that can be or how anyone would ever use all of them is another question.  His announcement was that the Visual Studio 2013 preview would be available today along with the Windows 8.1 bits.  One of the features of VS2013 that he demonstrated is the power consumption profiler.  With battery life being a key factor with consumer consumption devices this is a welcome addition. He didn’t limit his presentation to VS2013 features though.  He showed how the Store has been redesigned to enable better search and discoverability of apps and how Win 8.1 can perform multiple screen scales depending on the resolution of the device automatically.  The last feature he demoed was the real time video streaming API which he made sure we understood by attaching a Surface to a little robot.  Oh, but there was one more thing.  Antoine and Julie announce that all attendees would also be getting Surface Pros.  BONUS! How much more could there be?  Gurdeep Singh Pall was about to pile on.  He introduced us to Bing as a platform (BaaP?).  He said if they (Microsoft) could do something with and API that is good 3rd party developers can do something that is dynamite and showed us some of the tools they had produced.  These included natural user interface improvements such as voice commands that looked to put Siri to shame.  Add to that 3D, OCR and translation capabilities and the future looks to be full of opportunities. Balmer then came out to show us one last thing.  Project Spark is a game design environment that will be available for Windows 8.1, XBox 360 and XBox One.  All I can say is that if my kids get their hands on this they are going to be able to learn some of what dad does in a much more enjoyable way. At the end of it all I was both exhausted and energized by what I saw.  What could they have possibly left for the day 2 keynote?  I hear it will feature Scott Hanselman.  If that is right we are in for a treat.  See you there. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote,Bing,Visual Studio 2013,Project Spark

  Read the article

• Upgrading to Code Based Migrations EF 4.3.1 with Connector/Net 6.6

  - by GABMARTINEZ

  Entity Framework 4.3.1 includes a new feature called code first migrations.  We are adding support for this feature in our upcoming 6.6 release of Connector/Net.  In this walk-through we'll see the workflow of code-based migrations when you have an existing application and you would like to upgrade to this EF 4.3.1 version and use this approach, so you can keep track of the changes that you do to your database.   The first thing we need to do is add the new Entity Framework 4.3.1 package to our application. This should via the NuGet package manager.  You can read more about why EF is not part of the .NET framework here. Adding EF 4.3.1 to our existing application  Inside VS 2010 go to Tools -> Library Package Manager -> Package Manager Console, this will open the Power Shell Host Window where we can work with all the EF commands. In order to install this library to your existing application you should type Install-Package EntityFramework This will make some changes to your application. So Let's check them. In your .config file you'll see a  <configSections> which contains the version you have from EntityFramework and also was added the <entityFramework> section as shown below. This section is by default configured to use SQL Express which won't be necesary for this case. So you can comment it out or leave it empty. Also please make sure you're using the Connector/Net 6.6.x version which is the one that has this support as is shown in the previous image. At this point we face one issue; in order to be able to work with Migrations we need the __MigrationHistory table that we don't have yet since our Database was created with an older version. This table is used to keep track of the changes in our model. So we need to get it in our existing Database. Getting a Migration-History table into an existing database First thing we need to do to enable migrations in our existing application is to create our configuration class which will set up the MySqlClient Provider as our SQL Generator. So we have to add it with the following code: using System.Data.Entity.Migrations;     //add this at the top of your cs file public class Configuration : DbMigrationsConfiguration<NameOfYourDbContext>  //Make sure to use the name of your existing DBContext { public Configuration() { this.AutomaticMigrationsEnabled = false; //Set Automatic migrations to false since we'll be applying the migrations manually for this case. SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());     }   }  This code will set up our configuration that we'll be using when executing all the migrations for our application. Once we have done this we can Build our application so we can check that everything is fine. Creating our Initial Migration Now let's add our Initial Migration. In Package Manager Console, execute "add-migration InitialCreate", you can use any other name but I like to set this as our initial create for future reference. After we run this command, some changes were done in our application: A new Migrations Folder was created. A new class migration call InitialCreate which in most of the cases should have empty Up and Down methods as long as your database is up to date with your Model. Since all your entities already exists, delete all duplicated code to create any entity which exists already in your Database if there is any. I found this easier when you don't have any pending updates to do to your database. Now we have our empty migration that will make no changes in our database and represents how are all the things at the begining of our migrations.  Finally, let's create our MigrationsHistory table. Optionally you can add SQL code to delete the edmdata table which is not needed anymore. public override void Up() { // Just make sure that you used 4.1 or later version         Sql("DROP TABLE EdmMetadata"); } From our Package Manager Console let's type: Update-database; If you like to see the operations made on each Update-database command you can use the flag -verbose after the Update-database. This will make two important changes.  It will execute the Up method in the initial migration which has no changes in the database. And second, and very important,  it will create the __MigrationHistory table necessary to keep track of your changes. And next time you make a change to your database it will compare the current model to the one stored in the Model Column of this table. Conclusion The important thing of this walk through is that we must create our initial migration before we start doing any changes to our model. This way we'll be adding the necessary __MigrationsHistory table to our existing database, so we can keep our database up to date with all the changes we do in our context model using migrations. Hope you have found this information useful. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Happy MySQL/Net Coding!

  Read the article

• How to move MOSS 2007 to another SharePoint Farm

  - by DipeshBhanani

  It was time of my first onsite client assignment on SharePoint. Client had one server production environment. They wanted to upgrade the topology with completely new SharePoint Farm of three servers. So, the task was to move whole MOSS 2007 stuff to the new server environment without impacting data. The last three words “… without impacting data…” were actually putting pressure on my head. Moreover SSP was required to move because additional information has been added for users apart from AD import.   I thought I had to do only backup and restore. It appeared pretty easy at first thought. Just because of these three damn scary words, I thought to check out on internet for guidance related to this scenario. I couldn’t get anything except general guidance of moving server on Microsoft TechNet site. I promised myself for starting blogs with this post if I would be successful in this task. Well, I took long time to write this but finally made it. I hope it will be useful to all guys looking for SharePoint server movement.   Before beginning restoration, make sure that, there is no difference in versions of SharePoint at source and destination server. Also check whether the state of SharePoint Installation at the time of backup and restore is same or not. (E.g. SharePoint related service packs and patches if any)   The main tasks of the server movement are as follow:   1.        Backup all the databases 2.        Install and configure SharePoint on new environment 3.        Deploy all solutions (WSP Files) globally to destination server- for installing features attached to the solutions 4.        Install all the custom features 5.        Deploy/Copy custom pages/files which are added to the “12Hive” folder later 6.        Restore SSP 7.        Restore My Site 8.        Restore other web application   Tasks 3 to 5 are for making sure that we have configured the environment well enough for the web application to be restored successfully. The main and complex task was restoring SSP. I have started restoring SSP through Central Admin. After a while, the restoration status was updated to “unsuccessful”. “Damn it, what went wrong?” I thought looking at the error detail down the page. I couldn’t remember the error message but I had corrected and restored it again.   Actually once you fail restoring SSP, until and unless you don’t clean all related stuff well, your restoration will be failed again and again. I wanted to find the actual reason. So cleaned, restored, cleaned, restored… I had tried almost 5-6 times and finally, I succeeded. I had realized how pleasant it is, to see the word “Successful” on the screen. Without wasting your much time to read, let me write all the detailed steps of restoring SSP:   1.        Delete the SSP through following STSADM command. stsadm -o deletessp -title <SSP name> -deletedatabases -force e.g.: stsadm -o deletessp -title SharedServices1 -deletedatabases –force 2.        Check and delete the web application associated with SSP if it exists. 3.        Remove Link from Check and remove “Alternate Access Mapping” associated with SSP if it exists. 4.        Check and delete IIS site as well as application pool associated with SSP if it exists. 5.        Stop following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search   6.        Delete all the databases associated/related to SSP from SQL Server. 7.        Reset IIS. 8.        Start again following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search   9.        Restore the new SSP.   After the SSP restoration, all other stuffs had completed very smoothly without any more issues. I did few modifications to sites for change of server name and finally, the new environment was ready.

  Read the article

• MERGE gives better OUTPUT options

  - by Rob Farley

  MERGE is very cool. There are a ton of useful things about it – mostly around the fact that you can implement a ton of change against a table all at once. This is great for data warehousing, handling changes made to relational databases by applications, all kinds of things. One of the more subtle things about MERGE is the power of the OUTPUT clause. Useful for logging.   If you’re not familiar with the OUTPUT clause, you really should be – it basically makes your DML (INSERT/DELETE/UPDATE/MERGE) statement return data back to you. This is a great way of returning identity values from INSERT commands (so much better than SCOPE_IDENTITY() or the older (and worse) @@IDENTITY, because you can get lots of rows back). You can even use it to grab default values that are set using non-deterministic functions like NEWID() – things you couldn’t normally get back without running another query (or with a trigger, I guess, but that’s not pretty). That inserted table I referenced – that’s part of the ‘behind-the-scenes’ work that goes on with all DML changes. When you insert data, this internal table called inserted gets populated with rows, and then used to inflict the appropriate inserts on the various structures that store data (HoBTs – the Heaps or B-Trees used to store data as tables and indexes). When deleting, the deleted table gets populated. Updates get a matching row in both tables (although this doesn’t mean that an update is a delete followed by an inserted, it’s just the way it’s handled with these tables). These tables can be referenced by the OUTPUT clause, which can show you the before and after for any DML statement. Useful stuff. MERGE is slightly different though. With MERGE, you get a mix of entries. Your MERGE statement might be doing some INSERTs, some UPDATEs and some DELETEs. One of the most common examples of MERGE is to perform an UPSERT command, where data is updated if it already exists, or inserted if it’s new. And in a single operation too. Here, you can see the usefulness of the deleted and inserted tables, which clearly reflect the type of operation (but then again, MERGE lets you use an extra column called $action to show this). (Don’t worry about the fact that I turned on IDENTITY_INSERT, that’s just so that I could insert the values) One of the things I love about MERGE is that it feels almost cursor-like – the UPDATE bit feels like “WHERE CURRENT OF …”, and the INSERT bit feels like a single-row insert. And it is – but into the inserted and deleted tables. The operations to maintain the HoBTs are still done using the whole set of changes, which is very cool. And $action – very convenient. But as cool as $action is, that’s not the point of my post. If it were, I hope you’d all be disappointed, as you can’t really go near the MERGE statement without learning about it. The subtle thing that I love about MERGE with OUTPUT is that you can hook into more than just inserted and deleted. Did you notice in my earlier query that my source table had a ‘src’ field, that wasn’t used in the insert? Normally, this would be somewhat pointless to include in my source query. But with MERGE, I can put that in the OUTPUT clause. This is useful stuff, particularly when you’re needing to audit the changes. Suppose your query involved consolidating data from a number of sources, but you didn’t need to insert that into the actual table, just into a table for audit. This is now very doable, either using the INTO clause of OUTPUT, or surrounding the whole MERGE statement in brackets (parentheses if you’re American) and using a regular INSERT statement. This is also doable if you’re using MERGE to just do INSERTs. In case you hadn’t realised, you can use MERGE in place of an INSERT statement. It’s just like the UPSERT-style statement we’ve just seen, except that we want nothing to match. That’s easy to do, we just use ON 1=2. This is obviously more convoluted than a straight INSERT. And it’s slightly more effort for the database engine too. But, if you want the extra audit capabilities, the ability to hook into the other source columns is definitely useful. Oh, and before people ask if you can also hook into the target table’s columns... Yes, of course. That’s what deleted and inserted give you.

  Read the article

• Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

  - by Charles Lamb

  We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

  Read the article

• A Knights Tale

  - by Phil Factor

  There are so many lessons to be learned from the story of Knight Capital losing nearly half a billion dollars as a result of a deployment gone wrong. The Knight Capital Group (KCG N) was an American global financial services firm engaging in market making, electronic execution, and institutional sales and trading. According to the recent order (File No.3.15570) against Knight Capital by U.S. Securities and Exchange Commission?, Knight had, for many years used some software which broke up incoming “parent” orders into smaller “child” orders that were then transmitted to various exchanges or trading venues for execution. A tracking ‘cumulative quantity’ function counted the number of ‘child’ orders and stopped the process once the total of child orders matched the ‘parent’ and so the parent order had been completed. Back in the mists of time, some code had been added to it  which was excuted if a particular flag was set. It was called ‘power peg’ and seems to have had a similar design and purpose, but, one guesses, would have shared the same tracking function. This code had been abandoned in 2003, but never deleted. In 2005, The tracking function was moved to an earlier point in the main process. It would seem from the account that, from that point, had that flag ever been set, the old ‘Power Peg’ would have been executed like Godzilla bursting from the ice, making child orders without limit without any tracking function. It wasn’t, presumably because the software that set the flag was removed. In 2012, nearly a decade after ‘Power Peg’ was abandoned, Knight prepared a new module to their software to cope with the imminent Retail Liquidity Program (RLP) for the New York Stock Exchange. By this time, the flag had remained unused and someone made the fateful decision to reuse it, and replace the old ‘power peg’ code with this new RLP code. Had the two actions been done together in a single automated deployment, and the new deployment tested, all would have been well. It wasn’t. To quote… “Beginning on July 27, 2012, Knight deployed the new RLP code in SMARS in stages by placing it on a limited number of servers in SMARS on successive days. During the deployment of the new code, however, one of Knight’s technicians did not copy the new code to one of the eight SMARS computer servers. Knight did not have a second technician review this deployment and no one at Knight realized that the Power Peg code had not been removed from the eighth server, nor the new RLP code added. Knight had no written procedures that required such a review.” (para 15) “On August 1, Knight received orders from broker-dealers whose customers were eligible to participate in the RLP. The seven servers that received the new code processed these orders correctly. However, orders sent with the repurposed flag to the eighth server triggered the defective Power Peg code still present on that server. As a result, this server began sending child orders to certain trading centers for execution. Because the cumulative quantity function had been moved, this server continuously sent child orders, in rapid sequence, for each incoming parent order without regard to the number of share executions Knight had already received from trading centers. Although one part of Knight’s order handling system recognized that the parent orders had been filled, this information was not communicated to SMARS.” (para 16) SMARS routed millions of orders into the market over a 45-minute period, and obtained over 4 million executions in 154 stocks for more than 397 million shares. By the time that Knight stopped sending the orders, Knight had assumed a net long position in 80 stocks of approximately $3.5 billion and a net short position in 74 stocks of approximately $3.15 billion. Knight’s shares dropped more than 20% after traders saw extreme volume spikes in a number of stocks, including preferred shares of Wells Fargo (JWF) and semiconductor company Spansion (CODE). Both stocks, which see roughly 100,000 trade per day, had changed hands more than 4 million times by late morning. Ultimately, Knight lost over $460 million from this wild 45 minutes of trading. Obviously, I’m interested in all this because, at one time, I used to write trading systems for the City of London. Obviously, the US SEC is in a far better position than any of us to work out the failings of Knight’s IT department, and the report makes for painful reading. I can’t help observing, though, that even with the breathtaking mistakes all along the way, that a robust automated deployment process that was ‘all-or-nothing’, and tested from soup to nuts would have prevented the disaster. The report reads like a Greek Tragedy. All the way along one wants to shout ‘No! not that way!’ and ‘Aargh! Don’t do it!’. As the tragedy unfolds, the audience weeps for the players, trapped by a cruel fate. All application development and deployment requires defense in depth. All IT goes wrong occasionally, but if there is a culture of defensive programming throughout, the consequences are usually containable. For financial systems, these defenses are required by statute, and ignored only by the foolish. Knight’s mistakes weren’t made by just one hapless sysadmin, but were progressive errors by an  IT culture spanning at least ten years.  One can spell these out, but I think they’re obvious. One can only hope that the industry studies what happened in detail, learns from the mistakes, and draws the right conclusions.

  Read the article

• Code refactoring with Visual Studio 2010 Part-4

  - by Jalpesh P. Vadgama

  I have been writing few post with code refactoring features in Visual Studio 2010. This post also will be part of series and this post will be last of the series. In this post I am going explain two features 1) Encapsulate Field and 2) Extract Interface. Let’s explore both features in details. Encapsulate Field: This is a nice code refactoring feature provides by Visual Studio 2010. With help of this feature we can create properties from the existing private field of the class. Let’s take a simple example of Customer Class. In that I there are two private field called firstName and lastName. Below is the code for the class. public class Customer { private string firstName; private string lastName; public string Address { get; set; } public string City { get; set; } } Now lets encapsulate first field firstName with Encapsulate feature. So first select that field and goto refactor menu in Visual Studio 2010 and click on Encapsulate Field. Once you click that a dialog box will appear like following. Now once you click OK a preview dialog box will open as we have selected preview reference changes. I think its a good options to check that option to preview code that is being changed by IDE itself. Dialog will look like following. Once you click apply it create a new property called FirstName. Same way I have done for the lastName and now my customer class code look like following. public class Customer { private string firstName; public string FirstName { get { return firstName; } set { firstName = value; } } private string lastName; public string LastName { get { return lastName; } set { lastName = value; } } public string Address { get; set; } public string City { get; set; } } So you can see that its very easy to create properties with existing fields and you don’t have to change anything there in code it will change all the stuff itself. Extract Interface: When you are writing software prototype and You don’t know the future implementation of that then its a good practice to use interface there. I am going to explain here that How we can extract interface from the existing code without writing a single line of code with the help of code refactoring feature of Visual Studio 2010. For that I have create a Simple Repository class called CustomerRepository with three methods like following. public class CustomerRespository { public void Add() { // Some code to add customer } public void Update() { //some code to update customer } public void Delete() { //some code delete customer } } In above class there are three method Add,Update and Delete where we are going to implement some code for each one. Now I want to create a interface which I can use for my other entities in project. So let’s create a interface from the above class with the help of Visual Studio 2010. So first select class and goto refactor menu and click Extract Interface. It will open up dialog box like following. Here I have selected all the method for interface and Once I click OK then it will create a new file called ICustomerRespository where it has created a interface. Just like following. Here is a code for that interface. using System; namespace CodeRefractoring { interface ICustomerRespository { void Add(); void Delete(); void Update(); } } Now let's see the code for the our class. It will also changed like following to implement the interface. public class CustomerRespository : ICustomerRespository { public void Add() { // Some code to add customer } public void Update() { //some code to update customer } public void Delete() { //some code delete customer } } Isn't that great we have created a interface and implemented it without writing a single line of code. Hope you liked it. Stay tuned for more.. Till that Happy Programming.

  Read the article

• Building a plug-in for Windows Live Writer

  - by mbcrump

  This tutorial will show you how to build a plug-in for Windows Live Writer. Windows Live Writer is a blogging tool that Microsoft provides for free. It includes an open API for .NET developers to create custom plug-ins. In this tutorial, I will show you how easy it is to build one. Open VS2008 or VS2010 and create a new project. Set the target framework to 2.0, Application Type to Class Library and give it a name. In this tutorial, we are going to create a plug-in that generates a twitter message with your blog post name and a TinyUrl link to the blog post.  It will do all of this automatically after you publish your post. Once, we have a new projected created. We need to setup the references. Add a reference to the WindowsLive.Writer.Api.dll located in the C:\Program Files (x86)\Windows Live\Writer\ folder, if you are using X64 version of Windows. You will also need to add a reference to System.Windows.Forms System.Web from the .NET tab as well. Once that is complete, add your “using” statements so that it looks like whats shown below: Live Writer Plug-In "Using" using System; using System.Collections.Generic; using System.Text; using WindowsLive.Writer.Api; using System.Web; Now, we are going to setup some build events to make it easier to test our custom class. Go into the Properties of your project and select Build Events, click edit the Post-build and copy/paste the following line: XCOPY /D /Y /R "$(TargetPath)" "C:\Program Files (x86)\Windows Live\Writer\Plugins\" Your screen should look like the one pictured below: Next, we are going to launch an external program on debug. Click the debug tab and enter C:\Program Files (x86)\Windows Live\Writer\WindowsLiveWriter.exe Your screen should look like the one pictured below:   Now we have a blank project and we need to add some code. We start with adding the attributes for the Live Writer Plugin. Before we get started creating the Attributes, we need to create a GUID. This GUID will uniquely identity our plug-in. So, to create a GUID follow the steps in VS2008/2010. Click Tools from the VS Menu ->Create GUID It will generate a GUID like the one listed below: GUID <Guid("56ED8A2C-F216-420D-91A1-F7541495DBDA")> We only want what’s inside the quotes, so your final product should be: "56ED8A2C-F216-420D-91A1-F7541495DBDA". Go ahead and paste this snipped into your class just above the public class. Live Writer Plug-In Attributes [WriterPlugin("56ED8A2C-F216-420D-91A1-F7541495DBDA",    "Generate Twitter Message",    Description = "After your new post has been published, this plug-in will attempt to generate a Twitter status messsage with the Title and TinyUrl link.",    HasEditableOptions = false,    Name = "Generate Twitter Message",    PublisherUrl = "http://michaelcrump.net")] [InsertableContentSource("Generate Twitter Message")] So far, it should look like the following: Next, we need to implement the PublishNotifcationHook class and override the OnPostPublish. I’m not going to dive into what the code is doing as you should be able to follow pretty easily. The code below is the entire code used in the project. PublishNotificationHook public class Class1 :  PublishNotificationHook  {      public override void OnPostPublish(System.Windows.Forms.IWin32Window dialogOwner, IProperties properties, IPublishingContext publishingContext, bool publish)      {          if (!publish) return;          if (string.IsNullOrEmpty(publishingContext.PostInfo.Permalink))          {              PluginDiagnostics.LogError("Live Tweet didn't execute, due to blank permalink");          }          else          {                var strBlogName = HttpUtility.UrlEncode("#blogged : " + publishingContext.PostInfo.Title);  //Blog Post Title              var strUrlFinal = getTinyUrl(publishingContext.PostInfo.Permalink); //Blog Permalink URL Converted to TinyURL              System.Diagnostics.Process.Start("http://twitter.com/home?status=" + strBlogName + strUrlFinal);            }      } We are going to go ahead and create a method to create the short url (tinyurl). TinyURL Helper Method private static string getTinyUrl(string url) {     var cmpUrl = System.Globalization.CultureInfo.InvariantCulture.CompareInfo;     if (!cmpUrl.IsPrefix(url, "http://tinyurl.com"))     {         var address = "http://tinyurl.com/api-create.php?url=" + url;         var client = new System.Net.WebClient();         return (client.DownloadString(address));     }     return (url); } Go ahead and build your project, it should have copied the .DLL into the Windows Live Writer Plugin Directory. If it did not, then you will want to check your configuration. Once that is complete, open Windows Live Writer and select Tools-> Options-> Plug-ins and enable your plug-in that you just created. Your screen should look like the one pictured below: Go ahead and click OK and publish your blog post. You should get a pop-up with the following: Hit OK and It should open a Twitter and either ask for a login or fill in your status as shown below:   That should do it, you can do so many other things with the API. I suggest that if you want to build something really useful consult the MSDN pages. This plug-in that I created was perfect for what I needed and I hope someone finds it useful.

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >