Search Results

Search found 19970 results on 799 pages for 'jason down'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 247/799 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • Windows 7 x64 installation freezes on new PC build

    - by jhsowter
    Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

    Read the article

  • Best VPS based in UK?

    - by jimbo
    I am on the hunt for a new VPS supplier based in the UK, I was loving the look and service provided by Media Temple, and was going to go down that route but would prefer something held in the UK. Any suggestions more than welcome...

    Read the article

  • Program to restore open windows after crash

    - by Noah
    Are there any programs (for PC) that will constantly monitor what programs and windows within those programs you have open, and then restore each of those windows in case of a crash/forced restart? (looking specifically for Outlook, but open to all ideas)? Something similar to Chrome's feature where after a crash, it says "Looks like Chrome didn't shut down properly. Would you like to restore your open tabs?"

    Read the article

  • New drivers, now switchable graphics won't work

    - by Glenn Andersson
    I have an ASUS notebook with dual AMD/ATI graphic cards. Before I've been able to switch individual programs in the Vision Control Center from high performance to energy saving and the other way around. But today I updated the drivers using the AMD Mobility to version 12.10, and now every time I try to configure switchable graphics it either shuts down or does not come up at all. I have a new menu item called Global Switchable Graphics settings though. Any thoughts on this?

    Read the article

  • alternative filesystems for SSD

    - by freedrull
    I am tired of watching fsck check my filesystem when my eeepc 901 shuts down abruptly due to a crash. I know that with a journaling filesystem, I won't have to wait for a check. However, I am well aware of the poor I/O performance of the SSD, so I can imagine using a journaling filesystem being even more frustrating, since there will be constant writes to the journal? I will buy a new laptop without such a crummy ssd someday but, is there anything I can do now, on the software side of things?

    Read the article

  • How to mount an Oracle database to new instance?

    - by Vimvq1987
    I have an instance of Oracle 10g R2 installed on Windows Server 2003. This instance was running an database, which does not have any backup. Now the OS went down, and could not repaired, all I got is the running files of the old instance. How can I restore the database from these files to new instance? A step-by-step guide will be much appreciated because I'm new with Oracle. Thank you very much

    Read the article

  • Is there a user-comfortable Unix-like OS?

    - by Rob Kam
    Apparently BSD is like this but only for the OS not for the third party applications: Is there a Unix or Unix-like operating system (but not OS X), where all the installed applications and drivers either all work smoothly/properly or are not included in the distribution? But not something that's been dumbed down.

    Read the article

  • Can't send email on AOL at work

    - by Terry
    My AOL mail will not let me send anything out from a specific computer. I can send mail via Yahoo, Outlook Express or send AOL at home. This error occured after a netwrok server went down and we have not been able to fix it. Suggestions?

    Read the article

  • httpd dead but subsys locked

    - by McShark
    Hello, I modified today max_execution_time in php.ini, when I restarted the server, I get this error : Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs I killed httpd proc : killall httpd, and started it fine, but the I can't open any web site on the server. service httpd status OUTPUT : httpd dead but subsys locked I removed httpd file from /var/lock/subsys/ :S Same problem. Please Help!

    Read the article

  • Failover Issuer CAs without Clustering

    - by James Santiago
    I am attempting to setup a Certificate Authority with some failover capabilities for the issuer CAs. I have an offline root CA and am attempting to setup two subordinate CAs on our domain which will handle issuing certificates. I'm trying to determine the architecture needed for these two CAs to allow one to go down and the other to take over without the use of failover clustering, as the two are in different geographic locales. Are there documents regarding this setup?

    Read the article

  • HP to Cisco spanning tree root flapping

    - by Tim Brigham
    Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

    Read the article

  • How to disable "Attachment Execution Service" in Windows?

    - by netvope
    If I run an executable file downloaded from the Internet, Windows displays a warning that this file can potentially harm my computer. This happens even for files downloaded by Firefox (not just IE.) On networked drive, this seems to slow down program launch time a lot. From Wikipedia, I learned that the feature is called "Attachment Execution Service". How can I completely disable it? If this cannot be done, how can I instruct Firefox not to set the "downloaded" flag on the file?

    Read the article

  • Windows 7 remains powered on when restarting

    - by BombDefused
    I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

    Read the article

  • What is the best way to downscale mp4 video while keeping it as sharp as possible?

    - by Brandon Durham
    I've got an .mp4 file that's currently 830x1100 (it's a screencast) that I need to resize down to 114x150. I've been experimenting for hours with ffmpeg settings and nothing comes out looking nice and sharp. The original file looks decent, and I can't figure out why the downscaling makes it look so blurry. Unfortunately I can't share the video because it contains a walkthrough for software that hasn't yet been released.

    Read the article

  • Problem with Macbook air automatically not acquiring free wifi network dns or router address

    - by Rumsfeld
    I have this problem when my macbook air sometimes does not connect to free wifi hotspots. When the problem happens and I try to run the diagnostics, it normally gets to yellow network settings tab. It seems that it for some reason does not acquire automatically the router or dns address. Sometimes after I shut it down and restart it magically connects to the wifi hotspot but it is very inconsistent. Anyone knows a fix for this problem?

    Read the article

  • Software load balancing fail-over vs hardware

    - by SmartLemon
    Please correct me, but my understanding is that with software load balancing a service must be run on each server while there is one DS that notifies the other servers that a server has gone down and that they should consume that servers load. With hardware load balancing what happens in a fail-over? Could someone explain? Is there advantages with using hardware load balancing when it comes to fail-over, or is there advantages with software? Or do they both have their pros and cons?

    Read the article

  • Cyberlink PowerDVD 9 on netbook

    - by marc_s
    I tried to install CyberLink's PowerDVD 9 on a friend's netbook. The installation went OK (even though the install screen is too big to fit and you can't see the "Next " buttons etc.), but once installed, PowerDVD 9 refuses to launch. It claims it requires at least 1024x768 resolution - the Acer netbook has 1024x600 :-( Any way / hack / trick to get PowerDVD9 to work anyway?? Couldn't it scale down to e.g. 800x600?

    Read the article

  • optimizing operating systems to provide maximum informix performance.

    - by Frank Developer
    Are there any Informix-specific guides for optimizing any operating system where an ifx engine is running? For example, in Linux, strip-down to a bare minimum all unecessary binaries, daemons, utilities, tune kernel parameters, optimize raw and cooked devices (hdparm). Someday, maybe, informix can create its own proprietary PICK-like O/S. The general idea is for the OS where ifx sits on have the smallest footprint, lowest overhead impact on ifx and provide optimized ifx performance.

    Read the article

  • How do I remove initial indents on numbered lists?

    - by Peter
    In Word 2007 I want all numbers in a numbered list to be down the LH margin in line with the paragraphs. When a numbered list is selected, the numbers 1,2,3 are indented by a default 0.63cm. Ctrl-Shift-M will shift this indent back to the left margin. How do I permanently remove that initial indent and save that change to the normal template so that all new documents have zero indent on a newly inserted numbered list? (Same issue in Word 2010)

    Read the article

  • Is it possible to limit how much CPU a virtual machine can use with VMWare Player?

    - by Raz
    Is it possible to limit how much CPU a virtual machine can use with VMWare Player? I use VMWare to run a Windows XP virtual machine. I want to keep it on in the background all the time. The real computer runs Windows 7 and is sometimes a little bit short of memory. That's why I want to check if I can throttle the VM down to the bare minimum to keep it running in the background constantly without interfering too much.

    Read the article

  • How to logon with local account? RODC "There are no logon servers to process your request"

    - by g18c
    I have a site-to-site VPN, writeable DC in main office, Read-only DC. Today the VPN went down, but i couldnt log in to the read-only DC - the error message came up There are no logon servers to process your request. Since the RODC is a domain controller, there is no local administrator. How can i ensure that i am always able to log on to the RODC with a known account in an emergency if the writeable DC is not available?

    Read the article

  • CentOS 5.7 keeps rebooting after fresh installation

    - by Wagner Maestrelli
    I have just installed CentOS 5.7 x86_64 on a new computer. The installation went on without any issues. But, after it finnished, the machine started to show an awkward behaviour: it restarts every time it tries to boot. It happens after all the services have been started. The screen just goes black and it shows an error message from the monitor: Input not supported. And then it reboots. I took a look at the logs, but I couldn't manage to find anything. Any help? Update Before doing the hardware diagnosis, as pointed out, I decided to make some tests. First, I changed the runlevel to 3, adding the 3 parameter at the end of the kernel command. Then, after logging in in text mode, I checked the xorg.conf file out for some problems regarding the screen resolution. There was nothing unexpected set. Well, if there had to be a problem with it, I couldn't start the X server at the command line, right? So, I typed startx and Gnome started! So, probably, it's not an issue with the screen resolution, I suppose. Then I selected the Log Out root... Gnome menu option and something odd happened: the screen went black, the Input not supported monitor error message was displayed and the system rebooted. Yes, the same problem I was having while trying to boot! After that, I decided to try yet another test: I removed the rhgb quiet parameters from the kernel command to see if some error would show up. Well, to my surprise, the boot went on without problems! The Gnome login screen showed up, I logged in and the session started. But then I selected the Shut Down... menu option and guess what? Same problem: black screen, same monitor error and the system rebooted. Yes, it rebooted, it did not shut down. I repeated both of the tests and the behaviours were the same. I really don't know what's going on. It seems to be an issue regarding the changing of the screen mode or something like that. Any ideas? Could this be a hardware problem? Or does it seem to be something regarding the system configuration?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >