Search Results

Search found 6735 results on 270 pages for 'pre commit'.

Page 248/270 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

• Cepstral Analysis for pitch detection

  - by Ohmu

  Hi! I'm looking to extract pitches from a sound signal. Someone on IRC just explain to me how taking a double FFT achieves this. Specifically: take FFT take log of square of absolute value (can be done with lookup table) take another FFT take absolute value I am attempting this using vDSP I can't understand how I didn't come across this technique earlier. I did a lot of hunting and asking questions; several weeks worth. More to the point, I can't understand why I didn't think of it. I am attempting to achieve this with vDSP library. it looks as though it has functions to handle all of these tasks. However, I'm wondering about the accuracy of the final result. I have previously used a technique which scours the frequency bins of a single FFT for local maxima. when it encounters one, it uses a cunning technique (the change in phase since the last FFT) to more accurately place the actual peak within the bin. I am worried that this precision will be lost with this technique I'm presenting here. I guess the technique could be used after the second FFT to get the fundamental accurately. But it kind of looks like the information is lost in step 2. as this is a potentially tricky process, could someone with some experience just look over what I'm doing and check it for sanity? also, I've heard there is an alternative technique involving fitting a quadratic over neighbouring bins. Is this of comparable accuracy? if so, I would favour it, as it doesn't involve remembering bin phases. so questions: does this approach makes sense? Can it be improved? I'm a bit worried about And the log square component; there seems to be a vDSP function to do exactly that: vDSP_vdbcon however, there is no indication it precalculates a log-table -- I assume it doesn't, as the FFT function requires an explicit pre-calculation function to be called and passed into it. and this function doesn't. Is there some danger of harmonics being picked up? is there any cunning way of making vDSP pull out the maxima, biggest first? Can anyone point me towards some research or literature on this technique? the main question: is it accurate enough? Can the accuracy be improved? I have just been told by an expert that the accuracy IS INDEED not sufficient. Is this the end of the line? Pi PS I get SO annoyed (npi) when I want to create tags, but cannot. :| I have suggested to the maintainers that SO keep track of attempted tags, but I'm sure I was ignored. we need tags for vDSP, accelerate framework, cepstral analysis

  Read the article

• Where should I create my DbCommand instances?

  - by Domenic

  I seemingly have two choices: Make my class implement IDisposable. Create my DbCommand instances as private readonly fields, and in the constructor, add the parameters that they use. Whenever I want to write to the database, bind to these parameters (reusing the same command instances), set the Connection and Transaction properties, then call ExecuteNonQuery. In the Dispose method, call Dispose on each of these fields. Each time I want to write to the database, write using(var cmd = new DbCommand("...", connection, transaction)) around the usage of the command, and add parameters and bind to them every time as well, before calling ExecuteNonQuery. I assume I don't need a new command for each query, just a new command for each time I open the database (right?). Both of these seem somewhat inelegant and possibly incorrect. For #1, it is annoying for my users that I this class is now IDisposable just because I have used a few DbCommands (which should be an implementation detail that they don't care about). I also am somewhat suspicious that keeping a DbCommand instance around might inadvertently lock the database or something? For #2, it feels like I'm doing a lot of work (in terms of .NET objects) each time I want to write to the database, especially with the parameter-adding. It seems like I create the same object every time, which just feels like bad practice. For reference, here is my current code, using #1: using System; using System.Net; using System.Data.SQLite; public class Class1 : IDisposable { private readonly SQLiteCommand updateCookie = new SQLiteCommand("UPDATE moz_cookies SET value = @value, expiry = @expiry, isSecure = @isSecure, isHttpOnly = @isHttpOnly WHERE name = @name AND host = @host AND path = @path"); public Class1() { this.updateCookie.Parameters.AddRange(new[] { new SQLiteParameter("@name"), new SQLiteParameter("@value"), new SQLiteParameter("@host"), new SQLiteParameter("@path"), new SQLiteParameter("@expiry"), new SQLiteParameter("@isSecure"), new SQLiteParameter("@isHttpOnly") }); } private static void BindDbCommandToMozillaCookie(DbCommand command, Cookie cookie) { long expiresSeconds = (long)cookie.Expires.TotalSeconds; command.Parameters["@name"].Value = cookie.Name; command.Parameters["@value"].Value = cookie.Value; command.Parameters["@host"].Value = cookie.Domain; command.Parameters["@path"].Value = cookie.Path; command.Parameters["@expiry"].Value = expiresSeconds; command.Parameters["@isSecure"].Value = cookie.Secure; command.Parameters["@isHttpOnly"].Value = cookie.HttpOnly; } public void WriteCurrentCookiesToMozillaBasedBrowserSqlite(string databaseFilename) { using (SQLiteConnection connection = new SQLiteConnection("Data Source=" + databaseFilename)) { connection.Open(); using (SQLiteTransaction transaction = connection.BeginTransaction()) { this.updateCookie.Connection = connection; this.updateCookie.Transaction = transaction; foreach (Cookie cookie in SomeOtherClass.GetCookieArray()) { Class1.BindDbCommandToMozillaCookie(this.updateCookie, cookie); this.updateCookie.ExecuteNonQuery(); } transaction.Commit(); } } } #region IDisposable implementation protected virtual void Dispose(bool disposing) { if (!this.disposed && disposing) { this.updateCookie.Dispose(); } this.disposed = true; } public void Dispose() { this.Dispose(true); GC.SuppressFinalize(this); } ~Class1() { this.Dispose(false); } private bool disposed; #endregion }

  Read the article

• Rails controller method going to plural form

  - by Jty.tan

  I'm new to rails! Ok, I am trying to set up a user signup form. It is mapped as a singular resource in the routes map.resource :user And trying to create the user through the console works fine. the controller code for user's signup is as follows: def signup @user = User.new#(params[:user]) end def create @user = User.new(params[:user]) #debugger if request.post? if @user.save session[:user] = User.authenticate(@user.login, @user.password) flash[:message] = "Signup successful" redirect_to registries_path else flash[:warning] = "Signup unsuccessful" #redirect_to 'user/signup' end end end The signup view is as follows (and this is where i think something is going wrong) <% form_tag user_path do %> <p>User creation.</p> <p><%= error_messages_for 'user' %></p> <p> <label>Username:</label> <%= text_field_tag 'login', nil, :size => 20, :maxlength => 20 %> </p> <p> <label>Password:</label> <%= password_field_tag 'password', nil, :size => 20, :maxlength => 20 %> </p> <p> <label>Password confirmation:</label> <%= password_field_tag 'password_confirmation', nil, :size => 20, :maxlength => 20 %> </p> <p> <label>Email:</label> <%= text_field_tag 'email' %> </p> <p><%= submit_tag 'Signup' %></p> <% end %> Now, that page renders just fine. I've called the form on the "user_path" which is singular (i think?). But when I hit the submit button, it gives me an error saying that uninitialized constant UsersController the occurence of the error makes sense, since User is meant to be singular, so if it is trying to call the Users controller, it should be chucking an error. When I checked the server log, it shows this message: Processing ApplicationController#create (for 127.0.0.1 at 2010-05-08 16:26:14) [POST] Parameters: {"commit"=>"Signup", "password_confirmation"=>"[FILTERED]", "action"=>"create", "authenticity_token"=>"yOcHY+rMjaqmu9HS8EwnDqJKbc0Zxictc0y4dtD26ac=", "controller"=>"users", "login"=>"bob", "password"=>"[FILTERED]", "email"=>"[email protected]"} NameError (uninitialized constant UsersController): In the params, I can see that it is calling the "users" controller. But I'm not sure how to fix that, or what is causing it to call the "users" controller as opposed to the "user" controller. Any ideas? Thanks in advance!

  Read the article

• using '.each' method: how do I get the indexes of multiple ordered lists to each begin at [0]?

  - by shecky

  I've got multiple divs, each with an ordered list (various lengths). I'm using jquery to add a class to each list item according to its index (for the purpose of columnizing portions of each list). What I have so far ... <script type="text/javascript"> /* Objective: columnize list items from a single ul or ol in a pre-determined number of columns 1. get the index of each list item 2. assign column class according to li's index */ $(document).ready(function() { $('ol li').each(function(index){ // assign class according to li's index ... index = li number -1: 1-6 = 0-5; 7-12 = 6-11, etc. if ( index <= 5 ) { $(this).addClass('column-1'); } if ( index > 5 && index < 12 ) { $(this).addClass('column-2'); } if ( index > 11 ) { $(this).addClass('column-3'); } // add another class to the first list item in each column $('ol li').filter(function(index) { return index != 0 && index % 6 == 0; }).addClass('reset'); }); // closes li .each func }); // closes doc.ready.func </script> ... succeeds if there's only one list; when there are additional lists, the last column class ('column-3') is added to all remaining list items on the page. In other words, the script is presently indexing continuously through all subsequent lists/list items, rather than being re-set to [0] for each ordered list. Can someone please show me the proper method/syntax to correct/amend this, so that the script addresses/indexes each ordered list anew? many thanks in advance. shecky p.s. the markup is pretty straight-up: <div class="tertiary"> <h1>header</h1> <ol> <li><a href="#" title="a link">a link</a></li> <li><a href="#" title="a link">a link</a></li> <li><a href="#" title="a link">a link</a></li> </ol> </div><!-- END div class="tertiary" -->

  Read the article

• Using mcrypt to pass data across a webservice is failing

  - by adam

  Hi I'm writing an error handler script which encrypts the error data (file, line, error, message etc) and passes the serialized array as a POST variable (using curl) to a script which then logs the error in a central db. I've tested my encrypt/decrypt functions in a single file and the data is encrypted and decrypted fine: define('KEY', 'abc'); define('CYPHER', 'blowfish'); define('MODE', 'cfb'); function encrypt($data) { $td = mcrypt_module_open(CYPHER, '', MODE, ''); $iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND); mcrypt_generic_init($td, KEY, $iv); $crypttext = mcrypt_generic($td, $data); mcrypt_generic_deinit($td); return $iv.$crypttext; } function decrypt($data) { $td = mcrypt_module_open(CYPHER, '', MODE, ''); $ivsize = mcrypt_enc_get_iv_size($td); $iv = substr($data, 0, $ivsize); $data = substr($data, $ivsize); if ($iv) { mcrypt_generic_init($td, KEY, $iv); $data = mdecrypt_generic($td, $data); } return $data; } echo "<pre>"; $data = md5(''); echo "Data: $data\n"; $e = encrypt($data); echo "Encrypted: $e\n"; $d = decrypt($e); echo "Decrypted: $d\n"; Output: Data: d41d8cd98f00b204e9800998ecf8427e Encrypted: ê÷#¯KžViiÖŠŒÆÜ,ÑFÕUW£´Œt?†÷>c×åóéè+„N Decrypted: d41d8cd98f00b204e9800998ecf8427e The problem is, when I put the encrypt function in my transmit file (tx.php) and the decrypt in my recieve file (rx.php), the data is not fully decrypted (both files have the same set of constants for key, cypher and mode). Data before passing: a:4:{s:3:"err";i:1024;s:3:"msg";s:4:"Oops";s:4:"file";s:46:"/Applications/MAMP/htdocs/projects/txrx/tx.php";s:4:"line";i:80;} Data decrypted: Mª4:{s:3:"err";i:1024@7OYªç`^;g";s:4:"Oops";s:4:"file";sôÔ8F•Ópplications/MAMP/htdocs/projects/txrx/tx.php";s:4:"line";i:80;} Note the random characters in the middle. My curl is fairly simple: $ch = curl_init($url); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, 'data=' . $data); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); $output = curl_exec($ch); Things I suspect could be causing this: Encoding of the curl request Something to do with mcrypt padding missing bytes I've been staring at it too long and have missed something really really obvious If I turn off the crypt functions (so the transfer tx-rx is unencrypted) the data is received fine. Any and all help much appreciated! Thanks, Adam

  Read the article

• train wreck. Rails requires RubyGems >= 1.3.2

  - by JZ

  I recently upgraded ruby to ruby 1.8.7 (2009-06-12 patchlevel 174) [i686-darwin10] and I think I broke rails. When I attempt to load rails. I get an odd message. Please help! $ ruby script/server Rails requires RubyGems = 1.3.2. Please install RubyGems and try again: http://rubygems.rubyforge.org $ rails -v Rails 3.0.0.beta $ gem -v 1.3.6 $ which gem /usr/bin/gem $ whereis gem /usr/bin/gem $ which rails /usr/bin/rails $ whereis rails /usr/bin/rails $ /usr/bin/gem -v 1.3.6 $ /usr/bin/rails -v Rails 3.0.0.beta $ ruby script/console Rails requires RubyGems >= 1.3.2. Please install RubyGems and try again: http://rubygems.rubyforge.org $ gem list rails *** LOCAL GEMS *** rails (3.0.0.beta, 2.3.5, 2.2.2, 1.2.6) $ gem list *** LOCAL GEMS *** abstract (1.0.0) actionmailer (3.0.0.beta, 2.3.5, 2.2.2, 1.3.6) actionpack (3.0.0.beta, 2.3.5, 2.2.2, 1.13.6) actionwebservice (1.2.6) activemerchant (1.4.1) activemodel (3.0.0.beta) activerecord (3.0.0.beta, 2.3.5, 2.2.2, 1.15.6) activerecord-tableless (0.1.0) activeresource (3.0.0.beta, 2.3.5, 2.2.2) activesupport (3.0.0.beta, 2.3.5, 2.2.2, 1.4.4) acts_as_ferret (0.4.3) arel (0.2.pre) authlogic (2.1.3) builder (2.1.2) bundler (0.9.3) calendar_date_select (1.15) capistrano (2.5.2) cgi_multipart_eof_fix (2.5.0) chronic (0.2.3) columnize (0.3.1) compass (0.8.17) daemons (1.0.10) dnssd (0.6.0) erubis (2.6.5) fastercsv (1.5.0) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.6) flay (1.4.0) flog (2.4.0) gbarcode (0.98.16) gem_plugin (0.2.3) git (1.2.5) haml (2.2.15) haml-edge (2.3.100) highline (1.5.0) hoe (2.4.0) hpricot (0.6.164) i18n (0.3.3) javan-whenever (0.3.7) jeweler (1.4.0) jscruggs-metric_fu (1.1.5) json_pure (1.2.0) libxml-ruby (1.1.2) linecache (0.43) mail (2.1.2) mechanize (0.9.3) memcache-client (1.7.8) mime-types (1.16) mislav-will_paginate (2.3.11) mocha (0.9.7) mojombo-chronic (0.3.0) mongrel (1.1.5) needle (1.3.0) net-scp (1.0.1) net-sftp (2.0.1, 1.1.1) net-ssh (2.0.4, 1.1.4) net-ssh-gateway (1.0.0) nifty-generators (0.3.0) nokogiri (1.4.0) openrain-action_mailer_tls (1.1.3) passenger (2.2.5) polyglot (0.2.9) prawn (0.6.3) prawn-core (0.6.3) prawn-format (0.2.3) prawn-layout (0.3.2) prawn-security (0.1.1) rack (1.1.0, 1.0.1) rack-mount (0.4.5) rack-test (0.5.3) rails (3.0.0.beta, 2.3.5, 2.2.2, 1.2.6) railties (3.0.0.beta) rake (0.8.7, 0.8.3) rake-compiler (0.6.0) RedCloth (4.1.1) reek (1.2.6) relevance-rcov (0.9.2.1) rmagick (2.12.2) roodi (2.1.0) rsl-stringex (1.0.3) rspec (1.2.9) rspec-rails (1.2.9) ruby-debug (0.10.3) ruby-debug-base (0.10.3) ruby-openid (2.1.2) ruby-yadis (0.3.4) ruby2ruby (1.2.4) ruby_parser (2.0.4) rubyforge (2.0.3) rubygems-update (1.3.6, 1.3.5) rubynode (0.1.5) searchlogic (2.3.9) sexp_processor (3.0.3) spree (0.9.4) sqlite3-ruby (1.2.5, 1.2.4) termios (0.9.4) test-unit (2.0.5) text-format (1.0.0) text-hyphen (1.0.0) thor (0.13.0) tlsmail (0.0.1) topfunky-gruff (0.3.5) treetop (1.4.3) tzinfo (0.3.16) xmpp4r (0.4)

  Read the article

• Help with C# program design implementation: multiple array of lists or a better way?

  - by Bob

  I'm creating a 2D tile-based RPG in XNA and am in the initial design phase. I was thinking of how I want my tile engine to work and came up with a rough sketch. Basically I want a grid of tiles, but at each tile location I want to be able to add more than one tile and have an offset. I'd like this so that I could do something like add individual trees on the world map to give more flair. Or set bottles on a bar in some town without having to draw a bunch of different bar tiles with varying bottles. But maybe my reach is greater than my grasp. I went to implement the idea and had something like this in my Map object: List<Tile>[,] Grid; But then I thought about it. Let's say I had a world map of 200x200, which would actually be pretty small as far as RPGs go. That would amount to 40,000 Lists. To my mind I think there has to be a better way. Now this IS pre-mature optimization. I don't know if the way I happen to design my maps and game will be able to handle this, but it seems needlessly inefficient and something that could creep up if my game gets more complex. One idea I have is to make the offset and the multiple tiles optional so that I'm only paying for them when needed. But I'm not sure how I'd do this. A multiple array of objects? object[,] Grid; So here's my criteria: A 2D grid of tile locations Each tile location has a minimum of 1 tile, but can optionally have more Each extra tile can optionally have an x and y offset for pinpoint placement Can anyone help with some ideas for implementing such a design (don't need it done for me, just ideas) while keeping memory usage to a minimum? If you need more background here's roughly what my Map and Tile objects amount to: public struct Map { public Texture2D Texture; public List<Rectangle> Sources; //Source Rectangles for where in Texture to get the sprite public List<Tile>[,] Grid; } public struct Tile { public int Index; //Where in Sources to find the source Rectangle public int X, Y; //Optional offsets }

  Read the article

• Array not showing in Jlist but filled in console

  - by OVERTONE

  Hey there. been a busy debugger today. ill give ths short version. ive made an array list that takes names from a database. then i put the contents of the arraylist into an array of strings. now i want too display the arrays contents in a JList. the weird thing is it was working earlier. and ive two methods. ones just a little practice too make sure i was adding to the Jlist correctly. so heres the key codes. this is the layout of my code. variables constructor methods in my variables i have these 3 defined String[] contactListNames = new String[5]; ArrayList<String> rowNames = new ArrayList<String>(); JList contactList = new JList(contactListNames); simple enough. in my constructor i have them again. contactListNames = new String[5]; contactList = new JList(contactListNames); //i dont have the array list defined though. printSqlDetails(); // the prinSqldetails was too make sure that the connectionw as alright. and its working fine. fillContactList(); // this is the one thats causing me grief. its where all the work happens. // fillContactListTest(); // this was the tester that makes sure its adding to the list alright. heres the code for fillContactListTest() public void fillContactListTest() { for(int i = 0;i<3;i++) { try { String contact; System.out.println(" please fill the list at index "+ i); Scanner in = new Scanner(System.in); contact = in.next(); contactListNames[i] = contact; in.nextLine(); } catch(Exception e) { e.printStackTrace(); } } } heres the main one thats supposed too work. public void fillContactList() { int i =0; createConnection(); ArrayList<String> rowNames = new ArrayList<String>(); try { Statement stmt = conn.createStatement(); ResultSet namesList = stmt.executeQuery("SELECT name FROM Users"); try { while (namesList.next()) { rowNames.add(namesList.getString(1)); contactListNames =(String[])rowNames.toArray(new String[rowNames.size()]); // this used to print out contents of array list // System.out.println("" + rowNames); while(i<contactListNames.length) { System.out.println(" " + contactListNames[i]); i++; } } } catch(SQLException q) { q.printStackTrace(); } conn.commit(); stmt.close(); conn.close(); } catch(SQLException e) { e.printStackTrace(); } } i really need help here. im at my wits end. i just cant see why the first method would add to the JList no problem. but the second one wont. both the contactListNames array and array list can print fine and have the names in them. but i must be transfering them too the jlist wrong. please help p.s im aware this is long. but trust me its the short version.

  Read the article

• Value gets changed upon comiting. | CallableStatements

  - by Triztian

  Hello, I having a weird problem with a DAO class and a StoredProcedure, what is happening is that I use a CallableStatement object which takes 15 IN parameters, the value of the field id_color is retrieved correctly from the HTML forms it even is set up how it should in the CallableStatement setter methods, but the moment it is sent to the database the id_color is overwriten by the value 3 here's the "context": I have the following class DAO.CoverDAO which handles the CRUD operations of this table CREATE TABLE `cover_details` ( `refno` int(10) unsigned NOT NULL AUTO_INCREMENT, `shape` tinyint(3) unsigned NOT NULL , `id_color` tinyint(3) unsigned NOT NULL ', `reversefold` bit(1) NOT NULL DEFAULT b'0' , `x` decimal(6,3) unsigned NOT NULL , `y` decimal(6,3) unsigned NOT NULL DEFAULT '0.000', `typecut` varchar(10) NOT NULL, `cornershape` varchar(20) NOT NULL, `z` decimal(6,3) unsigned DEFAULT '0.000' , `othercornerradius` decimal(6,3) unsigned DEFAULT '0.000'', `skirt` decimal(5,3) unsigned NOT NULL DEFAULT '7.000', `foamTaper` varchar(3) NOT NULL, `foamDensity` decimal(2,1) unsigned NOT NULL , `straplocation` char(1) NOT NULL ', `straplength` decimal(6,3) unsigned NOT NULL, `strapinset` decimal(6,3) unsigned NOT NULL, `spayear` varchar(20) DEFAULT 'Not Specified', `spamake` varchar(20) DEFAULT 'Not Specified', `spabrand` varchar(20) DEFAULT 'Not Specified', PRIMARY KEY (`refno`) ) ENGINE=MyISAM AUTO_INCREMENT=143 DEFAULT CHARSET=latin1 $$ The the way covers are being inserted is by a stored procedure, which is the following: CREATE DEFINER=`root`@`%` PROCEDURE `putCover`( IN shape TINYINT, IN color TINYINT(3), IN reverse_fold BIT, IN x DECIMAL(6,3), IN y DECIMAL(6,3), IN type_cut VARCHAR(10), IN corner_shape VARCHAR(10), IN cutsize DECIMAL(6,3), IN corner_radius DECIMAL(6,3), IN skirt DECIMAL(5,3), IN foam_taper VARCHAR(7), IN foam_density DECIMAL(2,1), IN strap_location CHAR(1), IN strap_length DECIMAL(6,3), IN strap_inset DECIMAL(6,3) ) BEGIN INSERT INTO `dbre`.`cover_details` (`dbre`.`cover_details`.`shape`, `dbre`.`cover_details`.`id_color`, `dbre`.`cover_details`.`reversefold`, `dbre`.`cover_details`.`x`, `dbre`.`cover_details`.`y`, `dbre`.`cover_details`.`typecut`, `dbre`.`cover_details`.`cornershape`, `dbre`.`cover_details`.`z`, `dbre`.`cover_details`.`othercornerradius`, `dbre`.`cover_details`.`skirt`, `dbre`.`cover_details`.`foamTaper`, `dbre`.`cover_details`.`foamDensity`, `dbre`.`cover_details`.`strapLocation`, `dbre`.`cover_details`.`strapInset`, `dbre`.`cover_details`.`strapLength` ) VALUES (shape,color,reverse_fold, x,y,type_cut,corner_shape, cutsize,corner_radius,skirt,foam_taper,foam_density, strap_location,strap_inset,strap_length); END As you can see basically it just fills each field, now, the CoverDAO.create(CoverDTO cover) method which creates the cover is like so: public void create(CoverDTO cover) throws DAOException { Connection link = null; CallableStatement query = null; try { link = MySQL.getConnection(); link.setAutoCommit(false); query = link.prepareCall("{CALL putCover(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}"); query.setLong(1,cover.getShape()); query.setInt(2,cover.getColor()); query.setBoolean(3, cover.getReverseFold()); query.setBigDecimal(4,cover.getX()); query.setBigDecimal(5,cover.getY()); query.setString(6,cover.getTypeCut()); query.setString(7,cover.getCornerShape()); query.setBigDecimal(8, cover.getZ()); query.setBigDecimal(9, cover.getCornerRadius()); query.setBigDecimal(10, cover.getSkirt()); query.setString(11, cover.getFoamTaper()); query.setBigDecimal(12, cover.getFoamDensity()); query.setString(13, cover.getStrapLocation()); query.setBigDecimal(14, cover.getStrapLength()); query.setBigDecimal(15, cover.getStrapInset()); query.executeUpdate(); link.commit(); } catch (SQLException e) { throw new DAOException(e); } finally { close(link, query); } } The CoverDTO is made of accessesor methods, the MySQL object basically returns the connection from a pool. Here is the pset Query with dummy but appropriate data: putCover(1,10,0,80.000,80.000,'F','Cut',0.000,0,15.000,'4x2',1.5,'A',10.000,5.000) As you can see everything is fine just when I write to the DB instead of 10 in the second parameter a 3 is written. I have done the following: Traced the id_color value to the create method, still got replaced by a 3 Hardcoded the value in the DAO create method, still got replaced by a 3 Called the procedure from the MySQL Workbench, it worked fined so I assume something is happening in the create method, any help is really appreciated.

  Read the article

• Ideas for designing an automated content tagging system needed

  - by Benjamin Smith

  I am currently designing a website that amongst other is required to display and organise small amounts of text content (mainly quotes, article stubs, etc.). I currently have a database with 250,000+ items and need to come up with a method of tagging each item with relevant tags which will eventually allow for easy searching/browsing of the content for users. A very simplistic idea I have (and one that I believe is employed by some sites that I have been looking to for inspiration (http://www.brainyquote.com/quotes/topics.html)), is to simply search the database for certain words or phrases and use these words as tags for the content. This can easily be extended so that if for example a user wanted to show all items with a theme of love then I would just return a list of items with words and phrases relating to this theme. This would not be hard to implement but does not provide very good results. For example if I were to search for the month 'May' in the database with the aim of then classifying the items returned as realting to the topic of Spring then I would get back all occurrences of the word May, regardless of the semantic meaning. Another shortcoming of this method is that I believe it would be quite hard to automate the process to any large scale. What I really require is a library that can take an item, break it down and analyse the semantic meaning and also return a list of tags that would correctly classify the item. I know this is a lot to ask and I have a feeling I will end up reverting to the aforementioned method but I just thought I should ask if anyone knew of any pre-existing solution. I think that as the items in the database are short then it is probably quite a hard task to analyse any meaning from them however I may be mistaken. Another path to possibly go down would be to use something like amazon turk to outsource the task which may produce good results but would be expensive. Eventually I would like users to be able to (and want to!) tag content and to vote for the most relevant tags, possibly using a gameification mechanic as motivation however this is some way down the line. A temporary fix may be the best thing if this were the route I decided to go down as I could use the rough results I got as the starting point for a more in depth solution. If you've read this far, thanks for sticking with me, I know I'm spitballing but any input would be really helpful. Thanks.

  Read the article

• Can mono produce valid xhtml?

  - by z-boss

  I installed Mono and MonoDevelop 2.2 on my Windows PC. Created a default C# ASP.NET Web Application project. Here's the Default.aspx it created: <%@ Page Language="C#" Inherits="test.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head runat="server"> <title>Default</title> </head> <body> <form id="form1" runat="server"> <asp:Button id="button1" runat="server" Text="Click me!" OnClick="button1Clicked" /> </form> </body> </html> When I run it it feeds this html to the browser: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head><title> Default </title></head> <body> <form name="form1" method="post" action="Default.aspx" id="form1"> <div> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKMTQ2OTkzNDMyMWRkjWseIg+2HCgaNiY+XHmVKEq/CFg=" /> </div> <div> <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWAgLB5qLABwKs34rGBvJAYc3UJn3AcjSPjq8DVpMxclAk" /> </div> <input type="submit" name="button1" value="Click me!" id="button1" /> </form> </body> </html> XHTML validation fails with 3 errors: 1. Line 3, Column 1: Missing xmlns attribute for element html. The value should be: http://www.w3.org/1999/xhtml 2. Line 8, Column 13: there is no attribute "name" 3. Line 17, Column 71: document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag Is there some setting I'm missing?

  Read the article

• How to stream semi-live audio over internet

  - by Thomas Tempelmann

  I want to write something like Skype, i.e. I have a constant audio stream on one computer and then recompress it in a format that's suitable for a latent internet connection, receive it on the other end and play it. Let's also assume that the internet connection is fairly modern and fast, i.e. DSL or alike, no slow connections over phone and such. The involved computers will also be rather modern (Dual Core Intel CPUs at 2GHz or more). I know how to handle the audio on the machines. What I don't know is how to transmit the audio in an efficient way. The challenges are: I'd like get good audio quality across the line. The stream should be received without drops. The stream may, however, be received with a little delay (a second delay is acceptable). I imagine that the transport software could first determine the average (and max) latency, then start the stream and tell the receiver to wait for that max latency before starting to play the audio. With that, if the latency doesn't get any higher, the entire stream will be playable on the other side without stutter or drops. If, due to unexpected IP latencies or blockages, the stream does get cut off, I want to be able to notice this so that I can take actions (e.g. abort the stream) and eventually start a new transmission. What are my options if I want do use ready-made software for the compression and tranmission? I have no intention to write my own audio compression engine, really. OTOH, I plan to sell the solution in a vertical market, meaning I can afford a few dollars of license fees per copy, but not $100s. I guess the simplest solution would be to just open a TCP stream, send a few packets back and forth to determine their running time (or even use UDP for that), then use the results as the guide for my max latency value, then simply fire the audio data in its raw form (uncompressed 16 bit stereo), along with a timing code over the TCP connection. The receiver reads the data and plays it with the pre-determined delay. That might just work with the type of fast connection I expect. I just wonder if there are better solutions to reach this goal, with better performance (lower latency) and less data (compressed). BTW, I first try to implement this on OS X, but might want to do it on Windows, too, if it proves successful.

  Read the article

• Check my anagram code from a job interview in the past.

  - by Michael Dorgan

  Had the following as an interview question a while ago and choked so bad on basic syntax that I failed to advance (once the adrenalin kicks in, coding goes out the window.) Given a list of string, return a list of sets of strings that are anagrams of the input set. i.e. "dog","god", "foo" should return {"dog","god"}. Afterward, I created the code on my own as a sanity check and it's been around now for a bit. I'd welcome input on it to see if I missed anything or if I could have done it much more efficiently. Take it as a chance to improve myself and learn other techniques: void Anagram::doWork(list input, list &output) { typedef list SortType; SortType sortedInput; // sort each string and pair it with the original for(list<string>::iterator i = input.begin(); i != input.end(); ++i) { string tempString(*i); std::sort(tempString.begin(), tempString.end()); sortedInput.push_back(make_pair(*i, tempString)); } // Now step through the new sorted list for(SortType::iterator i = sortedInput.begin(); i != sortedInput.end();) { set<string> newSet; // Assume (hope) we have a match and pre-add the first. newSet.insert(i->first); // Set the secondary iterator one past the outside to prevent // matching the original SortType::iterator j = i; ++j; while(j != sortedInput.end()) { if(i->second == j->second) { // If the string matches, add it to the set and remove it // so that future searches need not worry about it newSet.insert(j->first); j = sortedInput.erase(j); } else { // else, next element ++j; } } // If size is bigger than our original push, we have a match - save it to the output if(newSet.size() > 1) { output.push_back(newSet); } // erase this element and update the iterator i = sortedInput.erase(i); } }

  Read the article

• Hibernate - strange order of native SQL parameters

  - by Xorty

  Hello, I am trying to use native MySQL's MD5 crypto func, so I defined custom insert in my mapping file. <hibernate-mapping package="tutorial"> <class name="com.xorty.mailclient.client.domain.User" table="user"> <id name="login" type="string" column="login"></id> <property name="password"> <column name="password" /> </property> <sql-insert>INSERT INTO user (login,password) VALUES ( ?, MD5(?) )</sql-insert> </class> </hibernate-mapping> Then I create User (pretty simple POJO with just 2 Strings - login and password) and try to persist it. session.beginTransaction(); // we have no such user in here yet User junitUser = (User) session.load(User.class, "junit_user"); assert (null == junitUser); // insert new user junitUser = new User(); junitUser.setLogin("junit_user"); junitUser.setPassword("junitpass"); session.save(junitUser); session.getTransaction().commit(); What actually happens? User is created, but with reversed parameters order. He has login "junitpass" and "junit_user" is MD5 encrypted and stored as password. What did I wrong? Thanks EDIT: ADDING POJO class package com.xorty.mailclient.client.domain; import java.io.Serializable; /** * POJO class representing user. * @author MisoV * @version 0.1 */ public class User implements Serializable { /** * Generated UID */ private static final long serialVersionUID = -969127095912324468L; private String login; private String password; /** * @return login */ public String getLogin() { return login; } /** * @return password */ public String getPassword() { return password; } /** * @param login the login to set */ public void setLogin(String login) { this.login = login; } /** * @param password the password to set */ public void setPassword(String password) { this.password = password; } /** * @see java.lang.Object#toString() * @return login */ @Override public String toString() { return login; } /** * Creates new User. * @param login User's login. * @param password User's password. */ public User(String login, String password) { setLogin(login); setPassword(password); } /** * Default constructor */ public User() { } /** * @return hashCode * @see java.lang.Object#hashCode() */ @Override public int hashCode() { final int prime = 31; int result = 1; result = prime * result + ((null == login) ? 0 : login.hashCode()); result = prime * result + ((null == password) ? 0 : password.hashCode()); return result; } /** * @param obj Compared object * @return True, if objects are same. Else false. * @see java.lang.Object#equals(java.lang.Object) */ @Override public boolean equals(Object obj) { if (this == obj) { return true; } if (obj == null) { return false; } if (!(obj instanceof User)) { return false; } User other = (User) obj; if (login == null) { if (other.login != null) { return false; } } else if (!login.equals(other.login)) { return false; } if (password == null) { if (other.password != null) { return false; } } else if (!password.equals(other.password)) { return false; } return true; } }

  Read the article

• [c++] upload image to imageshack

  - by cinek1lol

  Hi! I would like to send pictures via a program written in C + +. - OK WinExec("C:\\curl\\curl.exe -H Expect: -F \"fileupload=@C:\\curl\\ok.jpg\" -F \"xml=yes\" -# \"http://www.imageshack.us/index.php\" -o data.txt -A \"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1\" -e \"http://www.imageshack.us\"", NULL); It works, but I would like to send the pictures from pre-loaded carrier to a variable char (you know what I mean? First off, I load the pictures into a variable and then send the variable), cause now I have to specify the path of the picture on a disk. I wanted to write this program in c++ by using the curl library, not through exe. extension. I have also found such a program (which has been modified by me a bit) #include <stdio.h> #include <string.h> #include <iostream> #include <curl/curl.h> #include <curl/types.h> #include <curl/easy.h> int main(int argc, char *argv[]) { CURL *curl; CURLcode res; struct curl_httppost *formpost=NULL; struct curl_httppost *lastptr=NULL; struct curl_slist *headerlist=NULL; static const char buf[] = "Expect:"; curl_global_init(CURL_GLOBAL_ALL); /* Fill in the file upload field */ curl_formadd(&formpost, &lastptr, CURLFORM_COPYNAME, "send", CURLFORM_FILE, "nowy.jpg", CURLFORM_END); curl_formadd(&formpost, &lastptr, CURLFORM_COPYNAME, "nowy.jpg", CURLFORM_COPYCONTENTS, "nowy.jpg", CURLFORM_END); curl_formadd(&formpost, &lastptr, CURLFORM_COPYNAME, "submit", CURLFORM_COPYCONTENTS, "send", CURLFORM_END); curl = curl_easy_init(); headerlist = curl_slist_append(headerlist, buf); if(curl) { curl_easy_setopt(curl, CURLOPT_URL, "http://www.imageshack.us/index.php"); if ( (argc == 2) && (!strcmp(argv[1], "xml=yes")) ) curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist); curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost); res = curl_easy_perform(curl); curl_easy_cleanup(curl); curl_formfree(formpost); curl_slist_free_all (headerlist); } system("pause"); return 0; }

  Read the article

• Delphi - Read File To StringList, then delete and write back to file.

  - by Jkraw90

  I'm currently working on a program to generate the hashes of files, in Delphi 2010. As part of this I have a option to create User Presets, e.g. pre-defined choice of hashing algo's which the user can create/save/delete. I have the create and load code working fine. It uses a ComboBox and loads from a file "fhpre.ini", inside this file is the users presets stored in format of:- PresetName PresetCode (a 12 digit string using 0 for don't hash and 1 for do) On application loading it loads the data from this file into the ComboBox and an Array with the ItemIndex of ComboBox matching the corrisponding correct string of 0's and 1's in the Array. Now I need to implement a feature to have the user delete a preset from the list. So far my code is as follows, procedure TForm1.Panel23Click(Sender : TObject); var fil : textfile; contents : TStringList; x,i : integer; filline : ansistring; filestream : TFileStream; begin //Start Procedure //Load data into StringList contents := TStringList.Create; fileStream := TFileStream.Create((GetAppData+'\RFA\fhpre.ini'), fmShareDenyNone); Contents.LoadFromStream(fileStream); fileStream.Destroy(); //Search for relevant Preset i := 0; if ComboBox4.Text <> Contents[i] then begin Repeat i := i + 1; Until ComboBox4.Text = Contents[i]; end; contents.Delete(i); //Delete Relevant Preset Name contents.Delete(i); //Delete Preset Digit String //Write StringList back to file. AssignFile(fil,(GetAppData+'\RFA\fhpre.ini')); ReWrite(fil); for i := 0 to Contents.Count -1 do WriteLn(Contents[i]); CloseFile(fil); Contents.Free; end; However if this is run, I get a 105 error when it gets to the WriteLn section. I'm aware that the code isn't great, for example doesn't have checks for presets with same name, but that will come, I want to get the base code working first then can tweak and add extra checks etc. Any help would be appreciated.

  Read the article

• Unable to execute native sql query

  - by Renjith

  I am developing an application with Spring and hibernate. In the DAO class, I was trying to execute a native sql as follows: SELECT * FROM product ORDER BY unitprice ASC LIMIT 6 OFFSET 0 But the system throws an exception. org.hibernate.HibernateException: No Hibernate Session bound to thread, and configuration does not allow creation of non-transactional one here org.springframework.orm.hibernate3.SpringSessionContext.currentSession(SpringSessionContext.java:63) org.hibernate.impl.SessionFactoryImpl.getCurrentSession(SessionFactoryImpl.java:544) com.dao.ProductDAO.listProducts(ProductDAO.java:15) com.dataobjects.impl.ProductDoImpl.listProducts(ProductDoImpl.java:26) com.action.ProductAction.showProducts(ProductAction.java:53) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) application-context.xml is show below <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" p:location="/WEB-INF/jdbc.properties" /> <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource" p:driverClassName="${jdbc.driverClassName}" p:url="${jdbc.url}" p:username="${jdbc.username}" p:password="${jdbc.password}" /> <!-- Hibernate SessionFactory --> <!-- class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"--> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource"> <ref local="dataSource"/> </property> <property name="configLocation"> <value>WEB-INF/classes/hibernate.cfg.xml</value> </property> <property name="configurationClass"> <value>org.hibernate.cfg.AnnotationConfiguration</value> </property> <!-- <property name="annotatedClasses"> <list> <value>com.pojo.Product</value> <value>com.pojo.User</value> <value>com.pojo.UserLogin</value> </list> </property> --> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">${hibernate.dialect}</prop> <prop key="hibernate.show_sql">true</prop> </props> </property> </bean> <!-- User Bean definitions --> <bean name="/logincheck" class="com.action.LoginAction"> <property name="userDo" ref="userDo" /> </bean> <bean id="userDo" class="com.dataobjects.impl.UserDoImpl" > <property name="userDAO" ref="userDAO" /> </bean> <bean id="userDAO" class="com.dao.UserDAO" > <property name="sessionFactory" ref="sessionFactory" /> </bean> <bean name="/listproducts" class="com.action.ProductAction"> <property name="productDo" ref="productDo" /> </bean> <bean id="productDo" class="com.dataobjects.impl.ProductDoImpl" > <property name="productDAO" ref="productDAO" /> </bean> <bean id="productDAO" class="com.dao.ProductDAO" > <property name="sessionFactory" ref="sessionFactory" /> </bean> And DAO class is public class ProductDAO extends HibernateDaoSupport{ public List listProducts(int startIndex, int incrementor) { org.hibernate.Session session = getHibernateTemplate().getSessionFactory().getCurrentSession(); String queryString = "SELECT * FROM product ORDER BY unitprice ASC LIMIT 6 OFFSET 0"; List list = null; try{ session.beginTransaction(); org.hibernate.Query query = session.createQuery(queryString); list = query.list(); session.getTransaction().commit(); } catch(Exception e) { e.printStackTrace(); } finally { session.close(); } return list; } public List getProductCount() { String queryString = "SELECT COUNT(*) FROM Product"; return getHibernateTemplate().find(queryString); } } Any thoughts to fix it up?

  Read the article

• removing contents of div using Jquery "empty" doesn't work

  - by Andrew

  I'm trying to remove contents of particular div which are basically list items and a heading by using jquery empty so that I could replace with new contents. What happens when I run the code is, the whole div element blinked and flash the replaced content and then the old one reappear. Can anyone tell me what am I doing wrong? Here's an excerpt of my code - <pre> $("#msg_tab").bind("click",function(){ $("#sidebar1").remove(); var html="<ul><li><h2>test</h2><ul><li><a href='#'>Compose New Message</a></li><li><a href='#'>Inbox</a></li><li><a href='#'>Outbox</a></li><li><a href='#'>Unread</a></li><li><a href='#'>Archive</a></li></ul></li></ul>"; $("#sidebar1").append(html); }); <div id="sidebar1" class="sidebar"> <ul> <li> <h2>Messages</h2> <ul> <li><a href="#">Compose New Message</a></li> <li><a href="#">Inbox</a></li> <li><a href="#">Outbox</a></li> <li><a href="#">Unread</a></li> <li><a href="#">Archive</a></li> </ul> </li> </ul> </div> Another question is, how do I write multiple line html code string in javascript so that java would recognize as a string value? Placing forward slash at the end is ok when the string is not a html code but, in html code, I can't figure out how to escape forward slash from ending tags.I've tried escaping it with backward slash but doesn't work. I would be appreciated if anyone could shed a light on this matter as well.

  Read the article

• Rails: (Devise) Two different methods for new users?

  - by neezer

  I have a Rails 3 app with authentication setup using Devise with the registerable module enabled. I want to have new users who sign up using our outside register form to use the full Devise registerable module, which is happening now. However, I also want the admin user to be able to create new users directly, bypassing (I think) Devise's registerable module. With registerable disabled, my standard UsersController works as I want it to for the admin user, just like any other Rail scaffold. However, now new users can't register on their own. With registerable enabled, my standard UsersController is never called for the new user action (calling Devise::RegistrationsController instead), and my CRUD actions don't seem to work at all (I get dumped back onto my root page with no new user created and no flash message). Here's the log from the request: Started POST "/users" for 127.0.0.1 at 2010-12-20 11:49:31 -0500 Processing by Devise::RegistrationsController#create as HTML Parameters: {"utf8"=>"?", "authenticity_token"=>"18697r4syNNWHfMTkDCwcDYphjos+68rPFsaYKVjo8Y=", "user"=>{"email"=>"[email protected]", "password"=>"[FILTERED]", "password_confirmation"=>"[FILTERED]", "role"=>"manager"}, "commit"=>"Create User"} SQL (0.9ms) ... User Load (0.6ms) SELECT "users".* FROM "users" WHERE ("users"."id" = 2) LIMIT 1 SQL (0.9ms) ... Redirected to http://test-app.local/ Completed 302 Found in 192ms ... but I am able to register new users through the outside form. How can I get both of these methods to work together, such that my admin user can manually create new users and guest users can register on their own? I have my Users controller setup for standard CRUD: class UsersController < ApplicationController load_and_authorize_resource def index @users = User.where("id NOT IN (?)", current_user.id) # don't display the current user in the users list; go to account management to edit current user details end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save flash[:notice] = "#{ @user.email } created." redirect_to users_path else render :action => 'new' end end def edit end def update params[:user].delete(:password) if params[:user][:password].blank? params[:user].delete(:password_confirmation) if params[:user][:password].blank? and params[:user][:password_confirmation].blank? if @user.update_attributes(params[:user]) flash[:notice] = "Successfully updated User." redirect_to users_path else render :action => 'edit' end end def delete end def destroy redirect_to users_path and return if params[:cancel] if @user.destroy flash[:notice] = "#{ @user.email } deleted." redirect_to users_path end end end And my routes setup as follows: TestApp::Application.routes.draw do devise_for :users devise_scope :user do get "/login", :to => "devise/sessions#new", :as => :new_user_session get "/logout", :to => "devise/sessions#destroy", :as => :destroy_user_session end resources :users do get :delete, :on => :member end authenticate :user do root :to => "application#index" end root :to => "devise/session#new" end

  Read the article

• What is GC holes?

  - by tianyi

  I wrote a long TCP connection socket server in C#. Spike in memory in my server happens. I used dotNet Memory Profiler(a tool) to detect where the memory leaks. Memory Profiler indicates the private heap is huge, and the memory is something like below(the number is not real,what I want to show is the GC0 and GC2's Holes are very very huge, the data size is normal): Managed heaps - 1,500,000KB Normal heap - 1400,000KB Generation #0 - 600,000KB Data - 100,000KB "Holes" - 500,000KB Generation #1 - xxKB Data - 0KB "Holes" - xKB Generation #2 - xxxxxxxxxxxxxKB Data - 100,000KB "Holes" - 700,000KB Large heap - 131072KB Large heap - 83KB Overhead/unused - 130989KB Overhead - 0KB Howerver, what is GC hole? I read an article about the hole: http://kaushalp.blogspot.com/2007/04/what-is-gc-hole-and-how-to-create-gc.html The author said : The code snippet below is the simplest way to introduce a GC hole into the system. //OBJECTREF is a typedef for Object*. { PointerTable *pTBL = o_pObjectClass->GetPointerTable(); OBJECTREF aObj = AllocateObjectMemory(pTBL); OBJECTREF bObj = AllocateObjectMemory(pTBL); //WRONG!!! “aObj” may point to garbage if the second //“AllocateObjectMemory” triggered a GC. DoSomething (aOb, bObj); } All it does is allocate two managed objects, and then does something with them both. This code compiles fine, and if you run simple pre-checkin tests, it will probably “work.” But this code will crash eventually. Why? If the second call to “AllocateObjectMemory” triggers a GC, that GC discards the object instance you just assigned to “aObj”. This code, like all C++ code inside the CLR, is compiled by a non-managed compiler and the GC cannot know that “aObj” holds a root reference to an object you want kept live. ======================================================================== I can't understand what he explained. Does the sample mean aObj becomes a wild pointer after GC? Is it mean { aObj = (*aObj)malloc(sizeof(object)); free(aObj); function(aObj);? } ? I hope somebody can explain it.

  Read the article

• Progress dialog getting dismissed before the thread gets finished - Android

  - by user264953

  Hi experts, I use the code provided by Fedor in the following link, in order to get the latitude and longitude from my simple demo app. I am trying to fetch the latitude and longitude using the MyLocation class provided by him in that link. What is the simplest and most robust way to get the user's current location in Android? I try to fetch the latitude and longitude on a button click. On the button click, I start an async task and delegate the location fetching work to the do in background method of my asynctask. pre execute - progressdialog initiated. post execute - progress dialog dismissed. This is how, the progress dialog in my code should work and here is the issue which I have. THe progress dialog gets initiated correctly, but even before the latitude and longitude gets printed in the doinbackground method, the progress dialog gets dismissed. I do not understand why this happens. Here is my front end activity public class LocationServices extends Activity { MyLocation myLocation = new MyLocation(); LocationResult locationResult; TextView tv1, tv2; Location location; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); tv1 = (TextView) findViewById(R.id.tv1); tv2 = (TextView) findViewById(R.id.tv2); Button btn = (Button) findViewById(R.id.Button01); btn.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { new LocationAsyncTasking().execute(); } }); } public class LocationAsyncTasking extends AsyncTask<String, Void, Void> { ProgressDialog dialog; int totalAvail; protected void onPreExecute() { // this.dialog.setMessage("Inserting data..."); dialog = new ProgressDialog(LocationServices.this); this.dialog.setMessage("Fetching data..."); this.dialog.show(); } protected Void doInBackground(String... args) { Looper.prepare(); locationResult = new LocationResult() { public void gotLocation(Location location) { // TODO Auto-generated method stub // LocationServices.this.location = location; System.out.println("Progress dialog should be present now - latitude"+location.getLatitude()); System.out.println("Progress dialog should be present now - longitude"+location.getLongitude()); } }; myLocation.getLocation(LocationServices.this, locationResult); return (null); } protected void onProgressUpdate(Integer... progress) { } protected void onPostExecute(Void unused) { dialog.dismiss(); } } } I am quite puzzled, thinking of what makes this progress dialog disappear even before the SOP in doinbackground is finished. Experts, please help me understand and resolve this issue. Any help in this regard is well appreciated. Looking forward, Best Regards, Rony

  Read the article

• NHibernate: How is identity Id updated when saving a transient instance?

  - by bretddog

  If I use session-per-transaction and call: session.SaveOrUpdate(entity) corrected: session.SaveOrUpdateCopy(entity) ..and entity is a transient instance with identity-Id=0. Shall the above line automatically update the Id of the entity, and make the instance persistent? Or should it do so on transaction.Commit? Or do I have to somehow code that explicitly? Obviously the Id of the database row (new, since transient) is autogenerated and saved as some number, but I'm talking about the actual parameter instance here. Which is the business logic instance. EDIT Mappings: public class StoreMap : ClassMap<Store> { public StoreMap() { Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.Name); HasMany(x => x.Staff) // 1:m .Cascade.All(); HasManyToMany(x => x.Products) // m:m .Cascade.All() .Table("StoreProduct"); } } public class EmployeeMap : ClassMap<Employee> { public EmployeeMap() { Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.FirstName); Map(x => x.LastName); References(x => x.Store); // m:1 } } public class ProductMap : ClassMap<Product> { public ProductMap() { Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.Name).Length(20); Map(x => x.Price).CustomSqlType("decimal").Precision(9).Scale(2); HasManyToMany(x => x.StoresStockedIn) .Cascade.All() .Inverse() .Table("StoreProduct"); } } EDIT2 Class definitions: public class Store { public int Id { get; private set; } public string Name { get; set; } public IList<Product> Products { get; set; } public IList<Employee> Staff { get; set; } public Store() { Products = new List<Product>(); Staff = new List<Employee>(); } // AddProduct & AddEmployee is required. "NH needs you to set both sides before // it will save correctly" public void AddProduct(Product product) { product.StoresStockedIn.Add(this); Products.Add(product); } public void AddEmployee(Employee employee) { employee.Store = this; Staff.Add(employee); } } public class Employee { public int Id { get; private set; } public string FirstName { get; set; } public string LastName { get; set; } public Store Store { get; set; } } public class Product { public int Id { get; private set; } public string Name { get; set; } public decimal Price { get; set; } public IList<Store> StoresStockedIn { get; private set; } }

  Read the article

• Downloading large file with php

  - by Alessandro

  Hi, I have to write a php script to download potentially large files. The file I'm reporting here works fine most of the times. However, if the client's connection is slow the request ends (with status code 200) in the middle of the downloading, but not always at the very same point, and not at the very same time. I tried to overwrite some php.ini variables (see the first statements) but the problem remains. I don't know if it's relevant but my hosting server is SiteGround, and for simple static file requests, the download works fine also with slow connections. I've found Forced downloading large file with php but I didn't understand mario's answer. I'm new to web programming. So here's my code. <?php ini_set('memory_limit','16M'); ini_set('post_max_size', '30M'); set_time_limit(0); include ('../private/database_connection.php'); $downloadFolder = '../download/'; $fileName = $_POST['file']; $filePath = $downloadFolder . $fileName; if($fileName == NULL) { exit; } ob_start(); session_start(); if(!isset($_SESSION['Username'])) { // or redirect to login (remembering this download request) $_SESSION['previousPage'] = 'download.php?file=' . $fileName; header("Location: login.php"); exit; } if (file_exists($filePath)) { header('Content-Description: File Transfer'); header('Content-Type: application/octet-stream'); //header('Content-Disposition: attachment; filename='.$fileName); header("Content-Disposition: attachment; filename=\"$fileName\""); header('Content-Transfer-Encoding: binary'); header('Expires: 0'); header('Cache-Control: must-revalidate, post-check=0, pre-check=0'); //header('Pragma: public'); header('Content-Length: ' . filesize($filePath)); ob_clean(); flush(); // download // 1 // readfile($filePath); // 2 $file = @fopen($filePath,"rb"); if ($file) { while(!feof($file)) { print(fread($file, 1024*8)); flush(); if (connection_status()!=0) { @fclose($file); die(); } } @fclose($file); } exit; } else { header('HTTP/1.1 404 File not found'); exit; } ?>

  Read the article

• Avoiding explicit recursion in Haskell

  - by Travis Brown

  The following simple function applies a given monadic function iteratively until it hits a Nothing, at which point it returns the last non-Nothing value. It does what I need, and I understand how it works. lastJustM :: (Monad m) => (a -> m (Maybe a)) -> a -> m a lastJustM g x = g x >>= maybe (return x) (lastJustM g) As part of my self-education in Haskell I'm trying to avoid explicit recursion (or at least understand how to) whenever I can. It seems like there should be a simple non-explicitly recursive solution in this case, but I'm having trouble figuring it out. I don't want something like a monadic version of takeWhile, since it could be expensive to collect all the pre-Nothing values, and I don't care about them anyway. I checked Hoogle for the signature and nothing shows up. The m (Maybe a) bit makes me think a monad transformer might be useful here, but I don't really have the intuitions I'd need to come up with the details (yet). It's probably either embarrassingly easy to do this or embarrassingly easy to see why it can't or shouldn't be done, but this wouldn't be the first time I've used self-embarrassment as a pedagogical strategy. Background: Here's a simplified working example for context: suppose we're interested in random walks in the unit square, but we only care about points of exit. We have the following step function: randomStep :: (Floating a, Ord a, Random a) => a -> (a, a) -> State StdGen (Maybe (a, a)) randomStep s (x, y) = do (a, gen') <- randomR (0, 2 * pi) <$> get put gen' let (x', y') = (x + s * cos a, y + s * sin a) if x' < 0 || x' > 1 || y' < 0 || y' > 1 then return Nothing else return $ Just (x', y') Something like evalState (lastJustM (randomStep 0.01) (0.5, 0.5)) <$> newStdGen will give us a new data point.

  Read the article

• What web platform is right for me?

  - by egervari

  I've been looking at web frameworks like Rails, Grails, etc. I'm used to doing applications in Spring Framework with Hibernate... and I want something more productive. One of the things I realized is that while some of the things in Grails is sexy, there are some serious problems with it. Grails' controllers: 1) are implemented awfully. They don't seem to be able to extend from super classes at runtime. I tried this to add base actions and helper methods, and this seems to cause grails to blow up. 2) are based on an obsolete request parameters model (rather than form backing objects, which are much nicer). 3) are hard to test. Command objects are treated totally differently... and it's actually MUCH harder to write the test than it is to write the controller code. 4) Command objects operate totally differently. They are pre-validated and bound, which causes a lot of inconsistencies than basic parameter model. 5) Command objects are not reusable, and it's a pain in the rear to reuse most of the stuff from the domain classes, like constraints and fields. This is TRIVIAL to do in basic Spring. Why the hell was it not trivial to do in Grails? 6) The scaffolding that is generated is pure crap. It doesn't generalize inserts and updates... and it actually copy/pastes a pile of code in two views: create.gsp and edit.gsp. The views themselves are gargantuan piles of doggie do-do. This is further compounded by the fact that it uses low-level parameters and not objects. Integration tests are 30x slower than a Spring integration test. It is disgusting. Some mocking tests are so hard to write and aren't guaranteed to work when it's deployed, that I think it discourages fast, tdd test cycles. Most things seem to screw up grails while it's running, like adding a taglib, or anything really. The server restart problem wasn't solved at all. I'm starting to think going with Spring/Hibernate/Java is the only way to go. While there is a pretty big cost at startup, I know it'll eventually smooth out. It sucks I can't use a language like Scala... because idiomatically, it is so incompatible with Hibernate. This app is also not a run-of-the-mill UI over a database. It's got some of that, but it's not going to be a slouch. I am deathly scared of Grails now because of how crap it is in the Controller layer. Suggestions on what I can do?

  Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >