graphics card - Page 249

How Can I Upgrade to 11.10 from the Command Line?

- by nmagerko

I am trying to upgrade my 11.04 Ubuntu operating system to 11.10, as the current system is not the most recent. However, I cannot use the GUI to upgrade - as from past experience I have learned this - because my graphics hardware only works on 10.04 to 11.04 (non-inclusive) and from 11.10+. So once I can get to 11.10, I should be just fine. Because of this, I need to find a way to upgrade the OS from the command line. Can this be done? Thanks for any and all help.

Read the article

can not get Toshiba tv to full resolution

- by Tloc2077

I have a 23inch Toshiba model#23L1350U that I am using as a computer monitor via VGA plug; it is a full 1080P resolution TV but in Ubuntu it shows up as a Toshiba 72inch Television and wont go past the resolution 1366 by 1768. Has anyone came up with a solution to this problem..I used to get full 1080 resolution with my Insignia 32 inch TV so I know my hardware can push the signal, I am running a Radeon x1550 graphics cars 3200+ processor on a 756 chip set 64bit version of Ubuntu 13.04 your help is greatly appreciated and you may or may not be compensated for your time

Read the article

Wireless network unstable and often WPA2 protected networks just don't work

- by Pedro

I have an issue with my wireless network,so that the connection is working for only a few minutes, after which my browser no longer is able to load pages, even if the wireless is still active/connected. Furthermore, most of the time WPA2-personal protected networks don't work, (yesterday was the first time it worked - for a few minutes). By "don't work" I mean that it seems to successfully connect, but the browser can't load pages. I am running Ubuntu 10.10 32bit, and my wireless card is a RaLink rt3090. No changes have been done to any settings since Ubuntu was installed - networking began working on its own after the installation - but as described in first paragraph not very well.

Read the article

How to do pre-loading

- by Dave

I have a question that is confusing me with making a game. For my game launch i pre load everything for the main menu then i loop the game to display it. But lets argue player wants to launch a new game or a specific level, then you preload the relevant sounds/graphics for that level right? How ever, the player must already be running the game loop if they are at the main menu, so you can't load in the game loop or you will load every frame...but im pretty sure most big games don't preload every level when you first run the game from desktop because it would take a long time on some of these games.... How is it done :S

Read the article

What is this chargeback scam? [on hold]

- by Dan Friedman

We have a scammer that is buying our e-Books and then performing chargebacks. Our e-Books don't have DRM, so if they wanted to resell them, they would only need to buy each book once. But instead, they keep buying the same books over and over again and then performing hundreds of chargebacks. We have created some additional rules in our fraud protection tools to block certain aspects, even though all the info looks legit, and are hopeful this will slow them down. But my question is: What is the scam? If they aren't getting any product and they only get chargebacks for something they already purchased, then they can't get additional money from the credit card company, so then what's their motivation?

Read the article

Kubuntu 12.04 Won't let me search for wireless network

- by Bora George

Hello I'm running a brand new Kubuntu 12.04 single boot on my laptop, this is the first time I tried connecting to a wireless network. I tried using the network manager app allready on the task bar, but it doesn't let me tick the column to search for wireless networks, i.e. it will untick it automaticaly, it's dissabled by the software or the hardware, but I doubt it. I've tried searching the other questions on this site, and I can't see anything which helps with my problem. I know my wireless card is a Atheros AR9285, I don't think I installed any firmware for it, I'm sorry I can't offer more info but I'm completely new to networking and all that I have for the network to connect to are it's name and password of course.

Read the article

XRDP crashes when using xfce desktop

- by user291721

I've been struggling with this for a few days. Currently using Ubuntu 14.04. I started out trying to use VNC and could connect but only received a black and white checkered screen when connecting using tightvnc from my windows machine. Seems that applications seem to have issues interpreting the gnome graphics. I then tried XRDP and received the same issue but was able to find enough information to get by this issue. After creating a .xsession file and setting the desktop to spawn an xfce4-session I was able to connect and the desktop displays, at least for a few seconds. After a couple seconds rdp crashes and I'm unable to connect again until I restart the xrdp service. Any help would be appreciated. Thanks

Read the article

Atheros AR5BWB222 Wireless Intermittent Connectivity

- by Bart

So I recently installed Ubuntu on my Acer Aspire V3-551 laptop. I have an Atheros AR5BWB222 wireless adapter. Everything works fine except for the wireless. I can sometimes connect to the wireless, but most of the time it will be making an attempt to connect and then enver connect. Or it will connect, but it will only stay connected for about 10 seconds before getting disconnected from the wireless. All the other drivers updated through System SettingsAdditional Drivers are fine, even the Ethernet. Its just the problem with the wireless. I've tried a power managment setting, tried looking for additional updates, but nothing fixes my problem. Is there any solution for my particular wireless card?

Read the article

12.04 sound keeps auto-muting when idle

- by fali

I just installed 12.04 on an HP8510W. Everything works fine except for one weird behavior which I have noticed. When ever there is no audio playing, the audio mute indicator on the laptop is on. As soon as I start playing a you tube video the mute indicator turns off and I get sound. Here is my pulse audio output which says that the sink is suspended because it is idle: Welcome to PulseAudio! Use "help" for usage information. list-sinks 1 sink(s) available. index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE I tried running alsamixer, but I don't see the auto-mute option.

Read the article

Re-sizing the form without scaling the GUI

- by Bmoore

I am writing a turn based strategy game in C#. My GUI implementation consists of class that extends Form containing a class that extends Panel. When I render the GUI I draw to the paint method in the panel. I am trying to figure out what is the best way for handling form re-size events. I know I want a minimum window size, but I would prefer to not have a maximum or a set size. Ideally the GUI would reveal more/less of the map as the user changes the window size. I would like to avoid scaling the graphics if at all possible. What is the best way to handle re-size events?

Read the article

Can't get my Blue Snowflake Mic to work

- by TheNerdAL

It was working fine when I bought it. I think it was an update or something that made it stop. I don't think the Mic is broken, at least I hope not. Can anyone help? Please? I need it before tommorrow. I'm working on a video. I get this when I check the terminal for what USB devices are connected: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 2525:8912 Bus 003 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 003 Device 002: ID 056a:00d2 Wacom Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks.

Read the article

Wireless not functional

- by Michael Berkenblit

I am a complete newcomer to Ubuntu. Today I installed Ubuntu 12.04 onto an 3 or 4 year old laptop - an HP DV2221. Install went fine, except that I can't get the wireless card to operate. I see that there are drivers installed (Broadcom STA wireless) and it says they are activated, but the wireless light on the body of the computer is lit as orange, when it should be blue, and if I disconnect the Ethernet wire, there is no ability to get onto Firefox. I've looked at some of the similar questions on this site, as well as Googling the issue - mostly, I guess I don't understand how to navigate or do some of the fixes recommended - I'm fairly adept technologically around Windows, but know zilch about Linux and how to perform some of the fixes - so, if possible, please tell me how I get to the menus needed to rectify the situation.

Read the article

Catalyst forgets monitor settings after reboot or log out in 12.10

- by Mate Weisz

I have a Samsung monitor connected to my ATI Radeon graphic card via HDMI. By default the screen has a black border around, but I can disable it in the Catalyst menu to get full screen. (There is a scalebar that I have to set to the highest value.) My problem is that every time I turn off and on my computer it changes back and I have to set it up again. It is really annoying. Is there any way to make this setting permanent? Notes: 1. I open Catalyst with admin rights. 2. When I open the Catalyst settings menu, it looks like that it keeps my settings, because the scalebar stays at the highest point, but still it doesn't scale up my screen until I move back and forth the scale bar to the same point

Read the article

Efficient skeletal animation

- by Will

I am looking at adopting a skeletal animation format (as prompted here) for an RTS game. The individual representation of each model on-screen will be small but there will be lots of them! In skeletal animation e.g. MD5 files, each individual vertex can be attached to an arbitrary number of joints. How can you efficiently support this whilst doing the interpolation in GLSL? Or do engines do their animation on the CPU? Or do engines set arbitrary limits on maximum joints per vertex and invoke nop multiplies for those joints that don't use the maximum number? Are there games that use skeletal animation in an RTS-like setting thus proving that on integrated graphics cards I have nothing to worry about in going the bones route?

Read the article

Google I/O 2011: Accelerated Android Rendering

Google I/O 2011: Accelerated Android Rendering Romain Guy, Chet Haase Android 3.0 introduced a new hardware accelerated 2D rendering pipeline. In this talk, you will be introduced to the overall graphics architecture of the Android platform and get acquainted with the various rendering APIs at your disposal. You will learn how to choose the one that best fits your application. This talk will also deliver tips and tricks on how to use the new hardware accelerated pipeline to its full potential. From: GoogleDevelopers Views: 11086 62 ratings Time: 48:58 More in Science & Technology

Read the article

Unity environment way too slow in Ubuntu 13.10

- by Santiago

Unity and its apps open too slowly whenever I open one. It takes a while for them to appear completely. Everything works properly when the window is already open. The biggest problem is with the dash: it's SO SLOW when I'm looking for an app although I have removed some lenses. What should I do or what can I do? These issues only occur with Ubuntu 13.04 and 13.10 whereas 12.04 works AMAZNGLY but I have issues when updating a package or installing a new one, that's why I don't opt for that one. Specifications: RAM: 2GB, Processor: Intel® Atom™ CPU N2600 @ 1.60GHz × 4, Graphics card: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits)

Read the article

How to configure screens in console or create screen configuration profiles?

- by uncle Lem

I have two monitors and integrated GPU (Intel® HD Graphics 4600). It works fine for work or movies, but if I launch games in fullscreen mode - I get artifacts, glitches and so on. Temporary disabling second monitor solve this problem, but then I have to enable it back, and set its properties manually (by default, additional screen attaches its left-top corner to main monitor's right-top corner, but I need it to be left-bottom and right-bottom corners). So I need some kind of automatization here. Best option - tool to create and swap between some kind of config profiles. Or, maybe, some console manipulations which I can put into script files would be fine too. (Ubuntu 13.04, if it matters)

Read the article

atheros wireless ar9285 driver

- by nikola

I have been having problems with wireless on Ubuntu 10 and above, Mint 11 and above. The problem is in the driver for the wireless... I can see that there is no driver installed and yet it works but reduced a lot, for example: on windows 7 ultimate 100% on distance of 1 meter (currently running) Mint Cinnamon 15 on same distance 70% when it goes under the 40 % it simply disconnects and than takes a lot of time to connect again I am new to Linux and I don't know anything about programming, yet I love the interface and look of the OS but don't want to reject it for couple of problems. There is, however, a problem with brightness control on laptop, it shows the notification and slider but with no effect The question is: Can somebody explain to me where to download and how to install the ar9285 driver for atheros wireless card laptop acer emachines eme529? or can someone explain this to me only for the LINUX MINT 15 http://www.jrhenkelmann.net/index.php?option=com_content&task=view&id=34 because the synaptic's interface is different than of mint 15 I KNOW this is Ubuntu community but the problems persist in all Linux versions

Read the article

Backtrack 5 R2 Dual-Boot w/Windows 7 No Longer Loads

- by dstars5

A while back, I installed Backtrack 5 R2 to Dual Boot on a Windows 7 PC. It worked fine for a while, but now when I try to load it, the screen gets all messed up (tried to get a picture with my phone, but it wasn't working too well). The last line before it freezes says: fb: conflicting fb hw usage: nouveaufb vs VESA VGA - removing generic driver Since it last worked, the only changes I can think of are that the computer is now connected via ethernet cable to the router, and I upgraded the graphics card (to nvidia). Because of the last line, I personally would put my money on the latter, but I still have no clue how to fix this. Can someone help me? Thanks!

Read the article

Installing Broadcom Wireless Drivers

- by Fer1805

I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. What are the steps to install Broadcom wireless drivers for a BCM43xx card? I'm a user with no advance knowledge in Linux, so I would need clear explanations on how to make, compile, etc. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] iwconfig showed: lo no wireless extensions. eth0 no wireless extensions.

Read the article

How to reduce noise in Skype?

- by tkc

According to Alsamixer I do have a HDA Intel soundcard with Nvidia MCP77/78 HDMI chip (Realtek sound card on MSI notebook). When I use Skype under Ubuntu 12.04 for video calls, the other side hears background noise such as in Windows when you have your microphone boosted. In fact they can hear everything, even the fans turning on. There is nothing tweaked on Ubuntu's fresh installation. Also tried this site: https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages , but there are no *.deb files that I can test if any fix the problem. The question is if there is a way to add/tweak something to enable on software level the noise cancellation like the Windows sound drivers have that option. I use my build in mic.

Read the article

Unable to mount location, Can't mount file

- by user116008

I'm a new user to Ubuntu and I have a problem: I had Windows XP in my computer and I had two partitions: C (for system data) and D(for my personal stuff), then, during the Ubuntu installation I chose the Advanced Settings and formated C partition and left D partition intact, went back and chose Install Ubuntu and replace Windows and it installed fine. The problem is that now I open Nautilus and go to Computer, in there it shows my D partition, 640 Hard Disk, but when I try to mount it displays me a message: "Unable to mount location. Can't mount file". I ask you to explain me step-by-step what I need to do because I'm not an advanced user. My computer specs: 2 GiB RAM, Proccesor Pentium(R) Dual-Core CPU E5400 @ 2.70GHz × 2, Graphics Unknow (It's Nvidia GeForce 220 {1GB} or something), OS type 32-bit, Disk 628.0 GB P.S.: My HDD is internal, I'm not using external Hard Drives. Thank You!!! Mike

Read the article

11.04 64 bit live install cd freezes immediately on boot

- by wrchis

I am trying to install 11.04 alpha to a free set of partitions to try it out but neither the regular graphic installer or the alternate installer work. The graphic one freezes when I try to boot the cd (or cd image on usb stick rather) with a distorted static picture of my regular desktop repeated four times. I have an nvidia 240 graphics card if that is any help in diagnosis. I think it is a matter of getting the cd image to use a low rez video mode but I have no idea how to force that. I have used both the iso's from the regular page and the daily page (for several days so far) and they all do the same thing. I have tried both the internal utility and unetbootin to set up the stick with the same results. The alternate installer seems to work up to the point of the software selection step and then throws a 'failed step' error part way through.

Read the article

Wifi not working after upgrading from 12.04 to 13.10

- by Gary

I went through loads of posts looking for an answer to my WiFi problems but can't seem to fix it. I had Ubuntu 12.04 installed and WiFi worked fine with no issues whatsoever but then I upgraded to 13.10 it has stopped working. It shows the available networks but I can't connect to any of them it just does that animation thing then stops working. Update Heres the link to pastebin: http://pastebin.com/GyMMEYhv And heres what wifi card i have and driver lspci: 01:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a) Subsystem: Hewlett-Packard Company Device [103c:18de] Kernel driver in use: r8169 02:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290] Subsystem: Hewlett-Packard Company Device [103c:18ec] Kernel driver in use: rt2800pci

Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 249/402 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256 | Next Page >

- by nmagerko

- by Tloc2077

- by Pedro

- by Dave

- by Dan Friedman

- by Bora George

- by user291721

- by Bart

- by fali

- by Bmoore

- by TheNerdAL

- by Michael Berkenblit

- by Mate Weisz

- by Omega

- by Will

- by Santiago

- by uncle Lem

- by nikola

- by dstars5

- by Fer1805

- by tkc

- by user116008

- by wrchis

- by Gary

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256 | Next Page >