usb keyboard - Page 249

How can I disable 'natural breaks' in Workrave?

- by Pixelastic

I've just discovered Workrave, and was trying to use it along the Pomodoro technique (5mn break every 25mn). But the concept of 'natural breaks' of Workrave seems to interfere with what I'm trying to achieve. Workrave tries to guess that I'm doing a natural break if I stop using my mouse and keyboard for longer than 5s. It then stops the work timer, and start counting time as if I was doing my break. Here is a typical example : I've configured a 5mn rest break every 25mn. I start working. 10mn later, I receive a phone call, or start talking with a colleague, or any work-related action that do not need either keyboard nor mouse. Workrave then stops counting my time as work time, and starts its rest timer. If my phone call is shorter than 5mn, then Workrave will resume its timer where it stopped it. Meaning that my time on the phone is not counted as work time, and so my break time is pushed a few minutes later than it should be. Even worse, if my phone call is longer than 5mn, then Workrave count it as a complete rest break, and when I'll resume working, it will restart its timer completly. I'm looking for either a way to disable the natural breaks, or increase the 'inactivity time' from 5s to maybe ~1mn. Or maybe an other angle to look at the natural breaks that might work with the Pomodoro technique (forced 5mn breaks every 25mn). I'm using Ubuntu 11.10.

Read the article

Can I split one ethernet line coming out of my wall into multiple separate lines?

- by Burteçin 'Turk' Sapta

Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

Read the article

Google Chrome on Linux not using ALSA for sound

- by DarkMoon

On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

Read the article

Advice on cloning disk

- by hks

I'm going to buy a second disk for backup, the same size as my laptops. I want to mount it in a casing via usb and backup an entire hdd every soemtime. That's because I want the posibility to just switch drives in case of something goes wrong. I'm using Linux and obviously the right tool seems to be dd. The thing is that my laptop drive has a speed of around 50-70 MB/s and usb 2.0 is 57 MB/s. So to copy my 250GB disk should take me more than 1 hour if I'm lucky. I can't wait this much. I want some differential backup. I read one of JWZ articles. In it he gives more details for using rsync on Mac. He writes that there is possibility of making rsync'ed disk bootable. So my question is: how to make rsync'ed hdd bootable under Linux or are there other 'quick backup' tools for Linux that would allow me to just swap drives? Or should I just stick to dd :( ?

Read the article

Hardware testing tool/suite

- by Aviator

Hi All, I just bought a new core i5 system (assembled) and started installing Windows 7. It was failing for many times and at some point got installed. After that, frequent crashes related to MEMORY. So checked the RAM using memtest86+ and found many errors.I got it replaced with the vendor and now if i install ANY OS, at some point in installation it either freezes completely with no response for hours, or restarts automatically. I tried installing Windows 7, Windows Vista and Ubuntu 9.10. I tested the new RAM again and found no problems in about 2 passes using memtest86+. I even updated the BIOS using bootable USB and even the problem persists. I am really not sure which hardware is causing trouble. I dont have any OS inside it, so i have to check using bootable CDs DVDs and USB only. Please advice on how to proceed. Are there any suites/ separate tools for checking integrity of each hardware parts and troubleshoot it? I wanted to confirm which part is problematic before going for replacement. Thanks a lot! This is the config: Core i5, MSI P55-GD65, GSKill 2x2GB, Seagate 500GB 7200rpm, CM Extreme 600W PSU, Saphhire Radeon 5770 1GB, LG DVD Writer

Read the article

How to slave a 3.5" 500gb SATA external hard drive (Western Digital) to my Dell Inspiron laptop

- by AJ HDD

I have a 3.5" Western Digital My Book 500gb external hard drive. I gave it to a friend of mine, and he broke the USB port in it. I went to a nearby comp repair shop and had him solder the thing, and it didn't detect when it when I plugged it into my Dell Inspiron laptop. I recently saw about the 3.5" SATA to USB enclosure, so I went to check it. Strangely, when its placed in the enclosure, its not detecting in Windows. Also, when it was put as secondary (I'm guessing slave) to the shop fellow's desktop, it shows up in the BIOS and while starting, but then again doesn't show in Windows 7. The guy told me that I need to use a data recovery tool to get my data back. P.S. Whe WD hard drive doesnt have an OS, just data. So my question is: Can I slave the drive to my Dell laptop and try to recover the data, and if so how? I would really appreciate it any help, thanks in advance.

Read the article

Tried to install Mint to a Flash Drive. Now I can't boot from the main hard disk.

- by Dan

Hello, all. I'm kind of new to Linux and I need some help. I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt: error: no such device: (some long hex val) grub rescue> However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation, but, again, I'm kind of new to Linux, so I'm not sure exactly why. Any help is greatly appreciated.

Read the article

Install Peppermint OS three on Asus EeePC

- by Kithoth

I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

Read the article

Best format for hard drive for Windows and Mac?

- by Neil

I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

Read the article

Good support to multiple desktops AND multiple monitors in Linux (Ubuntu)?

- by Somebody still uses you MS-DOS

I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminal in my Linux environment. Nowadays I have 4 worspaces: Corporate management (e-mail) and corporate messenger; Work (Documents, Requisites) Dev (Development, All gVim windows, terminal and Firefox for development) Personal (Personal stuff: personal e-mail, delicious, twitter and so on) Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea). I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example. My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. Does Linux (Ubuntu 10.04 Lucid Lynx) support this envisioned setup? If so, how?

Read the article

Printer spools but doesn't print

- by DKNUCKLES

I am having a bizarre issue with an end user who is unable to print to a USB attached printer. The environment is as Windows 7 machine with a Canon Pixma iP90 printer. The driver is installed (and has been re-installed several times), but whenever a print job is sent the printer spools but no printing ever occurs. The following is some relevant information I can confirm that the printer is spooling as the spool folder fills up, and the job "releases" and the spool folder empties I have turned off print spooling with no luck None of the features from the Canon utilities (ie Turn Printer Off) features work Computer recognizes the printer as being installed. When the cable is unplugged the printer icon grey's out in Devices and Printers Printer and cable are confirmed working as they work with other PC's in the office I have deleted the USB Root Hub devices and rebooted the machine with no luck No error messages are displayed or logged in the event viewer. The Canon diagnostics utility doesn't detect any problem and states the printer is functioning properly Printer is not shared User is able to print to other shared printers in the office Any help with this issue would be greatly appreciated.

Read the article

How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

- by frLich

I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

Read the article

Safely transfer files from pc with internet connection to lan without allowing any other form of communication

- by Hugh Quenneville

In the company that I work there are computers that are connected to the Internet and computers that are connected to a Local Area Network. The LAN is considered a "safe zone" and the files that reside there should never be copied/moved to a computer that has Internet Access. So, now, if we want to download an installer for an application for example, we download it in a pc that has Internet Access and then move it using a "secure USB stick" to the Local Area Network. Is there a way to create an "safe, one-way connection" between a computer with Internet access and a computer from the LAN? This practically means that only files from the computer with the Internet access can be copied/moved to the LAN. In addition to that, if you want to transfer files you would have to provide your security credentials for the network (so, that only users with the appropriate access levels will be able to transfer files). Is it possible to create something like that and make it completely safe (or at least "equally safe" with the USB method that we currently use) or the fact that the computer with Internet access is connected with a wire to the LAN is a security risk by itself? NOTE: the LAN setup involves 2 Windows 2003 servers with Active Directory, Web servers and pretty much all the services that you would expect to find in a Windows network.

Read the article

Corrupted Laptop - Transfer Data Without My Computer (explorer.exe) Using Command Line

- by nicorellius

I have a laptop (Toshiba Satellite) that is pretty messed up. The person this belongs too already replaced it with a new machine. My job is to transfer all her data from this machine to disk so that I can transfer it to her. She doesn't want to lose any data (understandably so). Any operation I attempted (i.e., double clicking on any folder icon, like My Documents, My Computer, etc) resulted din a complete crash. The only good news is that I can actually start and navigate around using the command line. Also, I can access the internet. I have a network, so if I can map the drives I can get this thing figured out (hopefully). Also, I tried a USB drive but I couldn't figure out how to access it from the command line. Two questions (I need to use the command line for these): How would I go about accessing the USB drive and how can I map the shared drives on my network so that I may cd to that directory for use of the copy command?

Read the article

Implementing union of Set using basic java array

- by lupindeterd

Note: This is an assignment. Hi, Continuing with my Set implementation using Java basic array, I'm now struggling with the 3 to last function namely the union. import java.io.*; class Set { private int numberOfElements = 0; private String[] setElements = new String[5]; private int maxNumberOfElements = 5; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newtemparray = new String[x.getLength]; newtemparray = x.getMember; return x; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(1,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element six is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); setA.printSet(); Set setB = new Set(0,10,10); Set SetA = setA.union(setB,setA); } } Ok the method in question will be the implementation of union. As such this: Set union(Set x, Set y) { String[] newtemparray = new String[x.getLength]; newtemparray = x.getMember; return x; } I got this error: symbol : variable getLength location: class Set String[] newtemparray = new String[x.getLength]; ^ d:\javaprojects\Set.java:122: cannot find symbol symbol : variable getMember location: class Set newtemparray = x.getMember; ^ 2 errors My approach for union would be: *) create temporary array of string with size of the object x length. *) store object x members to temporary array by looping the object and calling the getMember *) loop object y members and check if element exist against temporary array. *) discard if it exist/add if it is not there *) return obj x with the union array. thanks, lupin

Read the article

Java constructor and modify the object properties at runtime

- by lupin

Note: This is an assignment Hi, I have the following class/constructor. import java.io.*; class Set { public int numberOfElements = 0; public String[] setElements = new String[5]; public int maxNumberOfElements = 5; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; Set temp = new Set(1,20,20); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newXtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newYtemparray.length; j++) { temp.add(newYtemparray[j]); } return temp; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(1,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element six is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); setA.printSet(); Set setB = new Set(0,10,10); Set SetA = setA.union(setB,setA); SetA.printSet(); } } I have two question here, why I when I change the class property declaration to: class Set { public int numberOfElements; public String[] setElements; public int maxNumberOfElements; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } I got this error: \ javaprojects>java SetDemo Enter string element to be added a You entered a Exception in thread "main" java.lang.NullPointerException at Set.findElement(Set.java:30) at Set.add(Set.java:43) at SetDemo.main(Set.java:169) Second, on the union method, why the result of SetA.printSet still printing null, isn't it getting back the return value from union method? Thanks in advance for any explaination. lupin

Read the article

Returning new object, overwrite the existing one in Java

- by lupin

Note: This is an assignment. Hi, Ok I have this method that will create a supposedly union of 2 sets. i mport java.io.*; class Set { public int numberOfElements; public String[] setElements; public int maxNumberOfElements; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { this.numberOfElements = numberOfE; this.setElements = new String[setE]; this.maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { if (setElements[i] != null) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; int len = newYtemparray.length + newXtemparray.length; Set temp = new Set(0,len,len); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newYtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newXtemparray.length; j++) { temp.add(newXtemparray[j]); } return temp; } Set difference(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; int len = newYtemparray.length + newXtemparray.length; Set temp = new Set(0,len,len); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newXtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newYtemparray.length; j++) { int retval = temp.findElement(newYtemparray[j]); if( retval != -1 ) { temp.remove(newYtemparray[j]); } } return temp; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(0,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element sixb is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); //setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); //setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); //setA.printSet(); Set setB = new Set(0,10,10); setB.add("b"); setB.add("z"); setB.add("x"); setB.add("y"); Set setC = setA.union(setB,setA); System.out.println("Elements of setA"); setA.printSet(); System.out.println("Union of setA and setB"); setC.printSet(); } } The union method works a sense that somehow I can call another method on it but it doesn't do the job, i supposedly would create and union of all elements of setA and setB but it only return element of setB. Sample output follows: java SetDemo Enter string element to be added hello You entered hello Set size is: 10 Set is empty? false Element sixb is member of setA? -1 Set is full? true Element b located on index: 2 Set size is: 9 Elements of setA Member elements on index: 0 hello Member elements on index: 1 world Member elements on index: 2 six Member elements on index: 3 seven Union of setA and setB Member elements on index: 0 b Member elements on index: 1 z Member elements on index: 2 x Member elements on index: 3 y thanks, lupin

Read the article

Unable to SSH into EC2 instance on Fedora 17

- by abhishek

I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

Read the article

Storyboard apply to all labels

- by ThitoO

Hi everyone ! I whant to apply a little storyboard to a collection of labels in my window. My storyboard is like that : <Storyboard x:Key="Storyboard1" AutoReverse="True" RepeatBehavior="Forever"> <ColorAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="label" Storyboard.TargetProperty="(Label.Foreground).(SolidColorBrush.Color)"> <SplineColorKeyFrame KeyTime="00:00:00.1000000" Value="#FFFFFF"/> </ColorAnimationUsingKeyFrames> </Storyboard> I have a window composed of that : <Grid Background="#FF000000"> <Viewbox HorizontalAlignment="Center" VerticalAlignment="Center" Stretch="Uniform"> <UniformGrid x:Name="grid" Background="#FF000000" /> </Viewbox> </Grid> When I want to start my storyboard I do that : Storyboard.SetTarget( _stb, myLabel ); _stb.Begin(); where _std is my storyboard loaded by the window's resources. The animation works fine, but on all labels (not only the one I want). I tried to switch SetTarget by SetTargetName but labels are created into my window by the constructor and names can not be founded when I try "SetTargetName". Do you have any ideas ? Thanks :) ------------ Edit : We asked me to be more descriptive -------------------------------------------------------------------- Label are not created directly in the xaml, they are created by the constructor of the window : public SpellerWindow(IKeyboard keyboard, int colomnNumber, SolidColorBrush background, SolidColorBrush foreground ) { InitializeComponent(); grid.Columns = colomnNumber; int i = 0; foreach( IKey key in keyboard.Zones.Default.Keys ) { Label lb = new Label(); lb.Foreground = foreground; lb.Name = "label"+(i++).ToString(); lb.Content = key.ActualKeys[keyboard.CurrentMode].UpLabel; lb.HorizontalAlignment = HorizontalAlignment.Center; lb.VerticalAlignment = VerticalAlignment.Center; Viewbox box = new Viewbox(); box.Stretch = Stretch.Fill; box.Child = lb; box.Tag = key; grid.Children.Add( box ); } } Animations are started by an event handler : void Highlighter_StartAnimation( object sender, HiEventArgs e ) { Storyboard stb; if( !_anims.TryGetValue( e.Step.Animation.Name, out stb ) ) { stb = (Storyboard)_window.FindResource( e.Step.Animation.Name ); _anims.Add( e.Step.Animation.Name, stb ); } DoAnimations( _zones[e.Step.Zone], stb ); } Finally, animations are started by DoAnimations : void DoAnimations( List<Label> labels, Storyboard stb ) { foreach( Label lb in labels ) { Storyboard.SetTarget( stb, lb ); stb.Begin(); } } I want to highlight a collection of labels, but all labels are flashing. I don't know why, but I try to create a label into the Xaml directly, and set a Storyboard.TargetName (bound to the name of the label) in the Xaml of the storyboard. And it's working ... Now you know everything. Thanks for you help :)

Read the article

Understanding Windows 8 Recovery options

- by stuffe

Background: I am preparing a PC that I am sending to a relative abroad, who has little or no internet access, and next to no sensible options for getting IT support should anything go wrong. As such I am trying to provide a full set of recovery options such that they are able to reinstall the OS with minimum fuss or assistance if required. The PC is a brand new Acer laptop that came with Windows 7 pre-installed (and an associated recovery partition) and a free upgrade to Windows 8. I have installed Windows 8 from scratch performing a format and clean install from media I burned from the official download. The existing Windows 7 recovery partition is still there, and I can still boot from it. I have created recovery DVDs of that in case it is ever lost. Here are my recovery options so far. I can perform a factory reset of Win 7 via the recovery partition I can perform a factory reset of Win 7 via burned recovery DVDs I can re-install Windows 8 cleanly from a DVD All of these are useful, but not what I want, because the first 2 methods use Win 7, and still fill the machine with crapware, and the latter doesn't provide for any post-install customisation and software installation. So, I am looking to see what other options are available to perform a Windows 8 recovery that will be more than a simple install. I am aware that Win8 comes with some useful refresh tools: Refresh your PC - Re-install Win 8 over the top of your existing installation, recovering from any Windows corruption etc. I can run this from my current install, although it says some files are missing that will be provided by me install or recovery media, which seems to be code for stick your install DVD in, and it starts after I do that - unfortunately for this particular laptop you need to specify a particular WIFI driver or the install bombs out part way through with IRQL errors, and this refresh method skips the part where you can load a driver, so it's no use to me. I think I can fix this by creating a custom recovery image using the recimg.exe command but it takes hours to complete so I haven't tried it yet. Reset your PC - Perform a full install and lose all your files. Again it needs my Install media inserting before it will do anything, but then it provides an error (will include later when I recreate it...) Now, these recovery options look useful (in principal, although both are fail for me) but they rely on having a working system to access the tools, which leads me to the last option, of making a Recovery USB drive. I have made a recovery drive, and it should perform loads of useful things, including copying my WIN7 recovery partition to the drive, providing the above refresh and reset options, providing other troubleshooting options and also the ability to restore from a custom image, only none of them seem to work for me. Creating the Recovery Drive - the option to include my recovery partition is greyed out. The partition exists and works fine, why will it not copy it? Refresh - I imagine this would have the same issues as I described before, but this is moot because when I try it says that the "drive where Windows is installed is locked, please unlock the drive and try again" with no info on what that means and how to do it. Restore - Again, probably pointless as I can just use the DVD, but it also errors: "unable to reset your PC. A required drive partition is missing" System Restore - should let me roll back a bad driver etc as per normal in Windows, only it simply says "To use system restore you must specify which windows installation to restore. Restart this computer, select an operating system, and select system restore" ?!?! System Image Recovery - this seems to be offering to restore from a Windows system image, but this is deprecated in Windows 8, although you can still make one if you use the Windows 7 Backup tools, however the resultant file is too large to put on the USB stick as it's FAT formatted, and would be a massive stack of DVDs anyway. So useless. It would be nice it it would work with the custom recovery image you can use with the refresh command, but there seems no option to do this. Automatic Repair - some diagnostics, which seem useless as it happily tells me it can't fix my problem, even though I have none. Command Prompt - yay, this works! What on earth do I want to use it for... Had any of the above worked, it might be useful, but as any form of install still requires you to have the DVD, and any form of custom recovery image also requires you to have either a massive stack of DVDs or an NTFS formatted backup device in addition to the recovery drive, it sort of ruins the point. It doesn't seem rocket science. I want to create a bootable USB drive that I can refresh Windows over an existing install with, perform a clean reinstall to a bare system, or recovery a customised image with existing apps installed. If anyone can point me in a direction that allows me to make a single recovery drive do these all these things, I would appreciate it. I have a 32Gb USB3 thumb drive that I bought for this very purpose, but it's seems to be fighting to let me do anything useful. At this rate I will be making a DriveImageXML recovery stick and dumping the OS with that, which I know works, but isn't so elegant as using the proper tools..

Read the article

KVM Guest installed from console. But how to get to the guest's console?

- by badbishop

I'm trying to install a fully virtualized guest (Fedora 14 x86_64) on KVM (RHEL 6), using command-line only (both hypervisor and guest). It goes without errors, and without a tangible result . I'd like to know how to do a text-only installation. So, here's what I've done: # virt-install \ --name=FE --ram=756 --vcpus=1 \ --file=/var/lib/libvirt/images/FE.img --network bridge:br0 \ --nographics --os-type=linux \ --extra-args='console=tty0' -v \ --cdrom=/media/usb/Fedora-14-x86_64-Live-Desktop.iso Starting install... Creating domain... | 0 B 00:00 Connected to domain FE Escape character is ^] ÿ Now what? As I understand after googling for a couple of days, I should see the guest's output from the text installation, but nothing happens. virt-viewer cannot connect to it, kindly suggesting that I explore all the options by adding --help (which I did). If I reconnect with virsh, I see this: Domain installation still in progress. You can reconnect to the console to complete the installation process. [root@v ~] # virsh console FEConnected to domain FE Escape character is ^] This shows that VM is running # virsh list Id Name State ---------------------------------- 8 FE running Qemu log: LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/libexec/qemu-kvm -S -M rhel6.0.0 -enable-kvm -m 756 -smp 1,sockets=1,cores=1,threads=1 -name FE -uuid 6989d008-7c89-424c-d2d3-f41235c57a18 -nographic -nodefconfig -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/FE.monitor,server,nowait -mon chardev=monitor,mode=control -rtc base=utc -no-reboot -boot d -drive file=/var/lib/libvirt/images/FE.img,if=none,id=drive-ide0-0-0,format=raw,cache=none -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive file=/media/usb/Fedora-14-x86_64-Live-Desktop.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:0a:65:8d,bus=pci.0,addr=0x2 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 char device redirected to /dev/pts/1 Output of /etc/libvirt/qemu/FE.xml # cat /etc/libvirt/qemu/FE.xml <domain type='kvm'> <name>FE</name> <uuid>6989d008-7c89-424c-d2d3-f41235c57a18</uuid> <memory>774144</memory> <currentMemory>774144</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/var/lib/libvirt/images/FE.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:0a:65:8d'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </memballoon> </devices> </domain> I'm obviously missing something that many others don't, but what is it? Thanx in advance!

Read the article

OS Missing? Messed up the MBR on Win7 64-bit

- by hom3lesshom3boy

I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

Read the article

How do I detect a file write error in C?

- by rich

I have an embedded environment where a user might insert or remove a USB flash drive. I would like to know if the drive has been removed, or if there is some other problem when I try to write to the drive. However, Linux just saves the information in its buffers and returns with no indicated error. The computer I'm using comes with a 2.4.26 kernel and libc 2.3.2. I'm mounting the drive this way: i = mount(MEMORY_DEV_PATH, MEMORY_MNT_PATH, "vfat", MS_SYNCHRONOUS, NULL); That works: 50:/root # mount /dev/scsi/host0/bus0/target0/lun0/part1 on /mem type vfat (rw,sync) 50:/root # Later, I try to copy a file to it: int ifile, ofile; ifile = open("/tmp/tmpmidi.mid", O_RDONLY); if (ifile < 0) { perror("open in"); break; } ofile = open(current_file_name.c_str(), O_WRONLY | O_SYNC); if (ofile < 0) { perror("open out"); break; } #define BUFSZ 256 char buffer[BUFSZ]; while (1) { i = read(ifile, buffer, BUFSZ); if (i < 0) { perror("read"); break; } j = write(ofile, buffer, i); if (j < 0) { perror("write"); break; } if (i != j) { perror("Sizes wrong"); break; } if (i < BUFSZ) { printf("Copy is finished, I hope\n"); close(ifile); close(ofile); break; } } If this snippet of code is executed with a write-protected USB memory, the result is Copy is finished, I hope amid a flurry of error messages from the kernel on the console. I believe the same thing would happen if I simply removed the USB drive (without unmounting it). I have also fiddled with devfs. I figured out how to get it to automatically mount the drive, (with the REGISTER event) but it never seems to trigger the UNREGISTER when I pull out the memory. How can I determine in my program whether I have successfully created a file? Update 4 July: It was a silly oversight of me not to check the result from close(). Unfortunately, the file can be closed without error. So that didn't help. What about fsync()? That sounds like a good idea, but that didn't catch the error either. There might be some interesting information in /sys if I had such a thing. I believe that didn't get added until 2.6.?. The comment(s) about the quality of my flash drive are probably justified. It's one of the earlier ones. In fact, write protect switches seem to be extremely rare these days. I think I have to use the overkill option: Create a file, unmount & remount the drive, and check to see if the file is there. If that doesn't solve my problem, then something is really messed up! Note to myself: Make sure the file you try to create isn't already there! By the way, this does happen to be a C++ program. You can tell by the .c_str() which I had intended to edit out for simplicity.

Read the article

Productivity Tips

- by Brian T. Jackett

A few months ago during my first end of year review at Microsoft I was doing an assessment of my year. One of my personal goals to come out of this reflection was to improve my personal productivity. While I hear many people say “I wish I had more hours in the day so that I could get more done” I feel like that is the wrong approach. There is an inherent assumption that you are being productive with your time that you already have and thus more time would allow you to be as productive given more time. Instead of wishing I could add more hours to the day I’ve begun adopting a number of processes or behavior changes in my personal life to make better use of my time with the goal of improving productivity. The areas of focus are as follows: Focus Processes Tools Personal health Email Note: A number of these topics have spawned from reading Scott Hanselman’s blog posts on productivity, reading of David Allen’s book Getting Things Done, and discussions with friends and coworkers who had great insights into this topic. Focus Pre-reading / viewing: Overcome your work addiction Millennials paralyzed by choice Its Not What You Read Its What You Ignore (Scott Hanselman video) I highly recommend Scott Hanselman’s video above and this post before continuing with this article. It is well worth the 40+ mins price of admission for the video and couple minutes for article. One key takeaway for me was listing out my activities in an average week and realizing which ones held little or no value to me. We all have a finite amount of time to work each day. Do you know how much time and effort you spend on various aspects of your life (family, friends, religion, work, personal happiness, etc.)? Do your actions and commitments reflect your priorities? The biggest time consumers with little value for me were time spent on social media services (Twitter and Facebook), playing an MMO video game, and watching TV. I still check up on Facebook, Twitter, Microsoft internal chat forums, and other services to keep contact with others but I’ve reduced that time significantly. As for TV I’ve cut the cord and no longer subscribe to cable TV. Instead I use Netflix, RedBox, and over the air channels but again with reduced time consumption. With the time I’ve freed up I’m back to working out 2-3 times a week and reading 4 nights a week (both of which I had been neglecting previously). I’ll mention a few tools for helping measure your time in the Tools section. Processes Do not multi-task. I’ll say it again. Do not multi-task. There is no such thing as multi tasking. The human brain is optimized to work on one thing at a time. When you are “multi-tasking” you are really doing 2 or more things at less than 100%, usually by a wide margin. I take pride in my work and when I’m doing something less than 100% the results typically degrade rapidly. Now there are some ways of bending the rules of physics for this one. There is the notion of getting a double amount of work done in the same timeframe. Some examples would be listening to podcasts / watching a movie while working out, using a treadmill as your work desk, or reading while in the bathroom. Personally I’ve found good results in combining one task that does not require focus (making dinner, playing certain video games, working out) and one task that does (watching a movie, listening to podcasts). I believe this is related to me being a visual and kinesthetic (using my hands or actually doing it) learner. I’m terrible with auditory learning. My fiance and I joke that sometimes we talk and talk to each other but never really hear each other. Goals / Tasks Goals can give us direction in life and a sense of accomplishment when we complete them. Goals can also overwhelm us and give us a sense of failure when we don’t complete them. I propose that you shift your perspective and not dwell on all of the things that you haven’t gotten done, but focus instead on regularly setting measureable goals that are within reason of accomplishing. At the end of each time frame have a retrospective to review your progress. Do not feel guilty about what you did not accomplish. Feel proud of what you did accomplish and readjust your goals for the next time frame to more attainable goals. Here is a sample schedule I’ve seen proposed by some. I have not consistently set goals for each timeframe, but I do typically set 3 small goals a day (this blog post is #2 for today). Each day set 3 small goals Each week set 3 medium goals Each month set 1 large goal Each year set 2 very large goals Tools Tools are an extension of our human body. They help us extend beyond what we can physically and mentally do. Below are some tools I use almost daily or have found useful as of late. Disclaimer: I am not getting endorsed to promote any of these products. I just happen to like them and find them useful. Instapaper – Save internet links for reading later. There are many tools like this but I’ve found this to be a great one. There is even a “read it later” JavaScript button you can add to your browser so when you navigate to a site it will then add this to your list. Stacks for Instapaper – A Windows Phone 7 app for reading my Instapaper articles on the go. It does require a subscription to Instapaper (nominal $3 every three months) but is easily worth the cost. Alternatively you can set up your Kindle to sync with Instapaper easily but I haven’t done so. SlapDash Podcast – Apps for Windows Phone and Windows 8 (possibly other platforms) to sync podcast viewing / listening across multiple devices. Now that I have my Surface RT device (which I love) this is making my consumption easier to manage. Feed Reader – Simple Windows 8 app for quickly catching up on my RSS feeds. I used to have hundreds of unread items all the time. Now I’m down to 20-50 regularly and it is much easier and faster to consume on my Surface RT. There is also a free version (which I use) and I can’t see much different between the free and paid versions currently. Rescue Time – Have you ever wondered how much time you’ve spent on websites vs. email vs. “doing work”? This service tracks your computer actions and then lets you report on them. This can help you quantitatively identify areas where your actions are not in line with your priorities. PowerShell – Windows automation tool. It is now built into every client and server OS. This tool has saved me days (and I mean the full 24 hrs worth) of time and effort in the past year alone. If you haven’t started learning PowerShell and you administrating any Windows OS or server product you need to start today. Various blogging tools – I wrote a post a couple years ago called How I Blog about my blogging process and tools used. Almost all of it still applies today. Personal Health Some of these may be common sense or debatable, but I’ve found them to help prioritize my daily activities. Get plenty of sleep on a regular basis. Sacrificing sleep too many nights a week negatively impacts your cognition, attitude, and overall health. Exercise at least three days. Exercise could be lifting weights, taking the stairs up multiple flights of stairs, walking for 20 mins, or a number of other "non-traditional” activities. I find that regular exercise helps with sleep and improves my overall attitude. Eat a well balanced diet. Too much sugar, caffeine, junk food, etc. are not good for your body. This is not a matter of losing weight but taking care of your body and helping you perform at your peak potential. Email Email can be one of the biggest time consumers (i.e. waster) if you aren’t careful. Time box your email usage. Set a meeting invite for yourself if necessary to limit how much time you spend checking email. Use rules to prioritize your email. Email from external customers, my manager, or include me directly on the To line go into my inbox. Everything else goes a level down and I have 30+ rules to further sort it, mostly distribution lists. Use keyboard shortcuts (when available). I use Outlook for my primary email and am constantly hitting Alt + S to send, Ctrl + 1 for my inbox, Ctrl + 2 for my calendar, Space / Tab / Shift + Tab to mark items as read, and a number of other useful commands. Learn them and you’ll see your speed getting through emails increase. Keep emails short. No one Few people like reading through long emails. The first line should state exactly why you are sending the email followed by a 3-4 lines to support it. Anything longer might be better suited as a phone call or in person discussion. Conclusion In this post I walked through various tips and tricks I’ve found for improving personal productivity. It is a mix of re-focusing on the things that matter, using tools to assist in your efforts, and cutting out actions that are not aligned with your priorities. I originally had a whole section on keyboard shortcuts, but with my recent purchase of the Surface RT I’m finding that touch gestures have replaced numerous keyboard commands that I used to need. I see a big future in touch enabled devices. Hopefully some of these tips help you out. If you have any tools, tips, or ideas you would like to share feel free to add in the comments section. -Frog Out Links Scott Hanselman Productivity posts http://www.hanselman.com/blog/CategoryView.aspx?category=Productivity Overcome your work addiction http://blogs.hbr.org/hbsfaculty/2012/05/overcome-your-work-addiction.html?awid=5512355740280659420-3271 Millennials paralyzed by choice http://priyaparker.com/blog/millennials-paralyzed-by-choice Its Not What You Read Its What You Ignore (video) http://www.hanselman.com/blog/ItsNotWhatYouReadItsWhatYouIgnoreVideoOfScottHanselmansPersonalProductivityTips.aspx Cutting the cord – Jeff Blankenburg http://www.jeffblankenburg.com/2011/04/06/cutting-the-cord/ Building a sitting standing desk – Eric Harlan http://www.ericharlan.com/Everything_Else/building-a-sitting-standing-desk-a229.html Instapaper http://www.instapaper.com/u Stacks for Instapaper http://www.stacksforinstapaper.com/ Slapdash Podcast Windows Phone - http://www.windowsphone.com/en-us/store/app/slapdash-podcasts/90e8b121-080b-e011-9264-00237de2db9e Windows 8 - http://apps.microsoft.com/webpdp/en-us/app/slapdash-podcasts/0c62e66a-f2e4-4403-af88-3430a821741e/m/ROW Feed Reader http://apps.microsoft.com/webpdp/en-us/app/feed-reader/d03199c9-8e08-469a-bda1-7963099840cc/m/ROW Rescue Time http://www.rescuetime.com/ PowerShell Script Center http://technet.microsoft.com/en-us/scriptcenter/bb410849.aspx

Read the article

"Translator by Moth"

- by Daniel Moth

This article serves as the manual for the free Windows Phone 7 app called "Translator by Moth". The app is available from the following link (browse the link on your Window Phone 7 phone, or from your PC with zune software installed): http://social.zune.net/redirect?type=phoneApp&id=bcd09f8e-8211-e011-9264-00237de2db9e Startup At startup the app makes a connection to the bing Microsoft Translator service to retrieve the available languages, and also which languages offer playback support (two network calls total). It populates with the results the two list pickers ("from" and "to") on the "current" page. If for whatever reason the network call fails, you are informed via a message box, and the app keeps trying to make a connection every few seconds. When it eventually succeeds, the language pickers on the "current" page get updated. Until it succeeds, the language pickers remain blank and hence no new translations are possible. As you can guess, if the Microsoft Translation service add more languages for textual translation (or enables more for playback) the app will automatically pick those up. "current" page The "current" page is the main page of the app with language pickers, translation boxes and the application bar. Language list pickers The "current" page allows you to pick the "from" and "to" languages, which are populated at start time. Until these language get populated with the results of the network calls, they remain empty and disabled. When enabled, tapping on either of them brings up on a full screen popup the list of languages to pick from, formatted as English Name followed by Native Name (when the latter is known). The "to" list, in addition to the language names, indicates which languages have playback support via a * in front of the language name. When making a selection for the "to" language, and if there is text entered for translation, a translation is performed (so there is no need to tap on the "translate" application bar button). Note that both language choices are remembered between different launches of the application. text for translation The textbox where you enter the translation is always enabled. When there is nothing entered in it, it displays (centered and in italics) text prompting you to enter some text for translation. When you tap on it, the prompt text disappears and it becomes truly empty, waiting for input via the keyboard that automatically pops up. The text you type is left aligned and not in italic font. The keyboard shows suggestions of text as you type. The keyboard can be dismissed either by tapping somewhere else on the screen, or via tapping on the Windows Phone hardware "back" button, or via taping on the "enter" key. In the latter case (tapping on the "enter" key), if there was text entered and if the "from" language is not blank, a translation is performed (so there is no need to tap on the "translate" application bar button). The last text entered is remembered between application launches. translated text The translated text appears below the "to" language (left aligned in normal font). Until a translation is performed, there is a message in that space informing you of what to expect (translation appearing there). When the "current" page is cleared via the "clear" application bar button, the translated text reverts back to the message. Note a subtle point: when a translation has been performed and subsequently you change the "from" language or the text for translation, the translated text remains in place but is now in italic font (attempting to indicate that it may be out of date). In any case, this text is not remembered between application launches. application bar buttons and menus There are 4 application bar buttons and 4 application bar menus. "translate" button takes the text for translation and translates it to the translated text, via a single network call to the bing Microsoft Translator service. If the network call fails, the user is informed via a message box. The button is disabled when there is no "from" language available or when there is not text for translation entered. "play" button takes the translated text and plays it out loud in a native speaker's voice (of the "to" language), via a single network call to the bing Microsoft Translator service. If the network call fails, the user is informed via a message box. The button is disabled when there is no "to" language available or when there is no translated text available. "clear" button clears any user text entered in the text for translation box and any translation present in the translated text box. If both of those are already empty, the button is disabled. It also stops any playback if there is one in flight. "save" button saves the entire translation ("from" language, "to" language, text for translation, and translated text) to the bottom of the "saved" page (described later), and simultaneously switches to the "saved" page. The button is disabled if there is no translation or the translation is not up to date (i.e. one of the elements have been changed). "swap to and from languages" menu swaps around the "from" and "to" languages. It also takes the translated text and inserts it in the text for translation area. The translated text area becomes blank. The menu is disabled when there is no "from" and "to" language info. "send translation via sms" menu takes the translated text and creates an SMS message containing it. The menu is disabled when there is no translation present. "send translation via email" menu takes the translated text and creates an email message containing it (after you choose which email account you want to use). The menu is disabled when there is no translation present. "about" menu shows the "about" page described later. "saved" page The "saved" page is initially empty. You can add translations to it by translating text on the "current" page and then tapping the application bar "save" button. Once a translation appears in the list, you can read it all offline (both the "from" and "to" text). Thus, you can create your own phrasebook list, which is remembered between application launches (it is stored on your device). To listen to the translation, simply tap on it – this is only available for languages that support playback, as indicated by the * in front of them. The sound is retrieved via a single network call to the bing Microsoft Translator service (if it fails an appropriate message is displayed in a message box). Tap and hold on a saved translation to bring up a context menu with 4 items: "move to top" menu moves the selected item to the top of the saved list (and scrolls there so it is still in view) "copy to current" menu takes the "from" and "to" information (language and text), and populates the "current" page with it (switching at the same time to the current page). This allows you to make tweaks to the translation (text or languages) and potentially save it back as a new item. Note that the action makes a copy of the translation, so you are not actually editing the existing saved translation (which remains intact). "delete" menu deletes the selected translation. "delete all" menu deletes all saved translations from the "saved" page – there is no way to get that info back other than re-entering it, so be cautious. Note: Once playback of a translation has been retrieved via a network call, Windows Phone 7 caches the results. What this means is that as long as you play a saved translation once, it is likely that it will be available to you for some time, even when there is no network connection. "about" page The "about" page provides some textual information (that you can view in the screenshot) including a link to the creator's blog (that you can follow on your Windows Phone 7 device). Use that link to discover the email for any feedback. Other UI design info As you can see in the screenshots above, "Translator by Moth" has been designed from scratch for Windows Phone 7, using the nice pivot control and application bar. It also supports both portrait and landscape orientations, and looks equally good in both the light and the dark theme. Other than the default black and white colors, it uses the user's chosen accent color (which is blue in the screenshot examples above). Feedback and support Please report (via the email on the blog) any bugs you encounter or opportunities for performance improvements and they will be fixed in the next update. Suggestions for new features will be considered, but given that the app is FREE, no promises are made. If you like the app, don't forget to rate "Translator by Moth" on the marketplace. Comments about this post welcome at the original blog.

Search Results

Search found 10489 results on 420 pages for 'usb keyboard'.

Page 249/420 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256 | Next Page >

- by Pixelastic

- by Burteçin 'Turk' Sapta

- by DarkMoon

- by hks

- by Aviator

- by AJ HDD

- by Dan

- by Kithoth

- by Neil

- by Somebody still uses you MS-DOS

- by DKNUCKLES

- by frLich

- by Hugh Quenneville

- by nicorellius

- by lupindeterd

- by lupin

- by lupin

- by abhishek

- by ThitoO

- by stuffe

- by badbishop

- by hom3lesshom3boy

- by rich

- by Brian T. Jackett

- by Daniel Moth

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256 | Next Page >