Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 249/391 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

  • openwrt uses a single interface bridge?

    - by timbo
    My understanding of bridging is that it ties together two interfaces at layer 2. I am looking at a Ubiquiti Nanostation2 running OpenWRT that has an ethernet port 'eth0' and a wifi port 'ath0'. The ethernet port (the 'wan' port) is not part of the bridge and the bridge is just a single interface. Can anyone clarify this? - seems very different to Ubuntu. /etc/config/network: config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' config 'interface' 'wifi' option 'ipaddr' '192.168.13.1' option 'type' 'bridge' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ifname' 'wifi0'

    Read the article

  • Windows 7 : Any way to disable "show caracter" in WIFI network properties?!

    - by Fox
    Hi everyone, Here's my issue. I'm working in a school as IT Tech and I'm currently planning to roll out Windows 7 on students laptop. The issue is : When you go to the properties of a WIFI network, you have the fields to input the WIFI key, WPA2 key here in my case, and you also have a checkbox that allow you to "unmask" the caracters of the wifi key. This is actually the problem. Anyone who can access the WIFI network properties, will be able to see the WIFI key, which is really an issue in a school envrironnement where student are all eager to get the key for their precious IPod Touch, what I don't want to happen for obvious reasons... So, is there a way to disable that checkbox or else, make the field cleared out when the checkbox is checked, just like it was on Windows XP or Vista? Thanks all for your answer.

    Read the article

  • Unable to connect to FTP server using Filezilla with router in-between

    - by pkswatch
    While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

    Read the article

  • Can't find newer DLINK Router DIR-400 firmware

    - by Junior Mayhé
    If you're here, it means you also have a Dlink 400 router. I asked DLINK but they didn't answer my question. I asked DLINK support again, but this time no answer (2 weeks later). In DLINK FTP site there is no firmware for DIR-400. Past year, Googling around Russia, I found a FIRMWARE_DIR400_v1.02B03.bin. But I am trying to figure out if is there any update, a 1.03 version or superior. Can anyone tell me why DLINK doesn't show this firmware update on their site, and if this DIR-450 is compatible with mine?

    Read the article

  • Suspected Router problems, [closed]

    - by jordon_user
    I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

    Read the article

  • Verizon HTC Eris - No sound on incoming phone call after 2.1 droid upgrade. Help!?

    - by Michael Rosario
    Has anyone had the following issue? I've had several issues as well: No sound when call connects, ringing or people talking. Apps would force close like weather. I did call HTC support and they had me go into Menu, Settings, Manage Applications and then clear the cache of the problem app. They also had me clear the cache once the browser was open and then do a soft reset (power off the phone and take the battery out for 15 seconds) This did fix some issues, but I am constantly turning my phone on and off to get sound back on call or to make the assigned ringtones work. There's no rhyme or reason as to why they stop working... Anyone else tried anything different??? Related problem statement... http://community.htc.com/na/htc-forums/android/f/32/p/2601/10344.aspx#10344 My wife and I are most concerned about the incoming call issue.

    Read the article

  • Microsoft Arc Mouse OS X

    - by meepz
    I recently bought a new Mac Book Pro with Mountain Lion 10.8 on it. The only portable mouse I have is my Microsoft Arc Mouse. I wanted to use it with the laptop so I installed the IntelliPoint 8.2 for Mac from Microsofts website. According to their website, this driver is for OS X 10.4-10.7. Now I thought that wouldnt be too much of an issue but unfortunately for me, the driver installs fine and the mouse is detected but I get no movement and when I click the buttons nothing happens. I took the mouse with me on a business trip to EU and before I left I checked if the mouse worked with my desktop which is running Windows 7 and it worked without any hiccups. I'm not too sure where the OS differs from 10.7 to 10.8. I found an article online but it doesn't pertain to my mouse, although it could be of assistance. I have tried my version of their adjustment but I am not too knowledgable on low level hardware/software modifications so I may have done it wrong. heres the link: http://refluxions.wordpress.com/2008/08/18/mac-os-x-mouse-madnessfixed/ I get the following details when I check mouse info in the IntelliPoint preferences pane: The following Microsoft mouse devices are currently connected to your Macintosh driven by the Intellipoint software. Arc Mouse Vendor name: Microsoft Product name: Microsoft AE 2.4GHz Transceiver 5.0 Vendor ID: 045E Product ID: 074F Device version: 0140 if anyone has any suggestions on how to fix this it would be greatly appreciated! I love the mouse and im here in EU for another two weeks. Thanks

    Read the article

  • Android tethering question

    - by Solignis
    Hi there, I have a Motorola Droid 1 with Android 2.2 on it. I found something odd that I don't understand why it works. If I plug my phone into my home computer which is Windows 7 and I turn on the tethering ability, I am met with a Verizon captive portal and it tells me I need to pay for a tethering plan (which I don't have). Now the weird thing, if I plug the same phone into my Ubuntu 10.10 laptop and enable tethering it works and can get on the internet with no captive portal showing up. The only thing I could notice that was different about the connections was Windows connected to the phone with an NDIS driver and Linux connected to the phone with what I think is a raw device mapping. Would that have anything to do with it?

    Read the article

  • Macs don't connect to wifi access point but PCs will

    - by Josh
    So, as a side project I'm going to try and figure out why the wifi APs in my building exhibit the following behavior: - They typically allow all types of computers to connect without issues - Sometimes Apples can't get an IP address but will still connect to the AP's signal - Less often, PCs can't connect to the wifi (same as above - yes signal, no IP addy) - Don't let Raiders fans on no matter the time of day! My first thought was that the DHCP leases were all taken up when the Apples would try to connect, and it was just their unlucky timing, but I would then try to log on with a PC that had a new, unleased MAC address and it would work... Could this be something to do with interoperability between an apple wifi card, and the APs? Different parts of the DHCP lease being taken up first? The fact that the Seattle Mariners might actually be good this year?? If this hasn't used up everyone's patience (with my crappy sports jokes), something else I could use some help with: - We don't have the model or type of AP - This is because there is no documentation available for them, and they literally look like small white boxes with no writing on them. Also, the company that installed them is out of business, so the situation might be that no docs will ever be on the way. -- Do you guys have any ideas on how to figure out what we have? Thanks as always for all the help, and I'm looking forward to the day when I know enough to start contributing back to the site, Josh

    Read the article

  • TP-LINK-8901 modem does not connect automatically; only works in bridged mode [closed]

    - by Arash
    Possible Duplicate: Cannot Connect To Internet In Automatic (pppoe) Mode Of Modem My TP-LINK-8901 modem does not connect to internet with "always on" (automatic) connection. I have to put it in bridge mode and make a connection in Windows to connect to internet. Also, there is no configuration problem. What I did: Reset modem Update firmware Is there any way to solve the problem myself, e.g. through hardware or software? I can't have it repaired because the warranty already expired.

    Read the article

  • Verizon 4G LTE vs. a LAN

    - by n8wrl
    I have been having quite a bit of trouble getting my new Verizon 4G-LTE service running on a Windows 7 desktop. My desktop is on a LAN here at home with two other PC's. We all share printers, files, media, etc. Until yesterday, we also shared a Verizon 3G modem via a NetGear 3G broadband WAP. That isn't compatible with the 4G so now I am just trying to get the 4G modem working directly connected to one of the desktops. After some USB wrangling, it seems to work. Except, every 7-10 minutes the connection would drop. After some time on the phone with a very nice Verizon technician, it seems to be staying up - it's been up for 20 minutes now. He told me that my LAN was causing the 4G to drop. That traffic on my LAN, even though it is not destined for the internet (ICS not working yet) was causing the cell tower to detect an 'IP change' and a 'security violation' in my modem and drop my connection. Is this Verizon's way of forbidding more than one computer to share a modem? I have my computer running now without a LAN connection and the 4G is still up. But this isn't practical. Has anyone heard of this?

    Read the article

  • Please recommend a good wifi to ethernet device.

    - by Fantomas
    I need that because I am running a free version of iESX server and there is very little that I can configure in the OS itself. The server is sitting rather far from my router and I want to get rid of that cable. Now, I have seen a device which is allows to cut a cable with a transmitter and a receiver. Ideally I just want a receiver because my router is already transmitting stuff. If you have successfully used a wifi to ethernet adapter / bridge, then please recommend it here. Thank you.

    Read the article

  • Load-balance with LAN and Wifi

    - by Synox
    I have a Mac, which runs Mac OSX 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wifi, one can be accessed via LAN. In OSX i can define the priority, which network to choose first. But what i wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused wifi routers if this would help. Compiling and configuring programms in linux is no problem for me. Thanks for any help.

    Read the article

  • 802.11 Capture Frame

    - by ALi
    I am using wireshark in monitor mode to capture all the frame. I buffered all the QosData in order to calculate the biterate of each station on the network. I calculate the biterate but it is not an accurate value. what i need to know is when the station use the network alone and when it uses it with another station? i know if two station with different wifi card for exemple ( st1 802.11g 54 Mb/s, st2 802.11n 300 Mb/s) if st1 uses alone the line the biterate used is 28 MB/s and if st2 uses alone the network the bit rate increase to approximately 150Mb/s but if the two station use the network at the same time the st1 lost about 80% of its bit rate because of the st1 wifi card thx in advance

    Read the article

  • Load-balance with LAN and Wi-Fi

    - by Synox
    I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programms in Linux is no problem for me.

    Read the article

  • Find the IP of the router between me and main router/gateway?

    - by Crash893
    I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

    Read the article

  • Internet connectivity issues with one router but work ok with other router

    - by user825904
    I have one Tplink ADSL ROUTER and when i enter username and password on setup page then everything works fine. Now i have one more router Netgear router then when i enter same username and password then interworks ok for some 50% websites but for other 50% websites the page is not loaded and it hangs there. In the sats bar it says website found , waiting for reply and it hnags there and no site is displayed. I wonder which setting is different on these two routers. The Tplink router i have bought is from local shop but netgear router is from different country. Can that make some difference

    Read the article

  • Virtual Wifi on Vista

    - by XGreen
    Hi Guys, Sorry if this is a very dumb question. I have installed the virtualWIFI msi on vista. I assumed that would simply just allow selecting more than one wifi connection with my single card however I don't get much new options. Any help on how to get this running on vista is greatly appreciated.

    Read the article

  • How to use ipw3945 on Ubuntu 9.04

    - by Aaron
    Note: uname -a 2.6.28-16-generic cat /etc/issue Ubuntu 9.04 \n \l I have disabled iwl3945: cat /etc/modprobe.d/blacklist.conf | tail -3 blacklist iwl3945 blacklist mac8021 Question: How can I use iwp3945 instead?

    Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >